Tender For special Repair To Bldg No P-30 (01 To 04), Jco Md Accn At Tower Colony Of Ab-02 Under Nasirabad Mil Stn
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Oct 2026
18 days left
EMD
94000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ajmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No P-30 (01 To 04), Jco Md Accn At Tower Colony Of Ab-02 Under Nasirabad Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster on stone/brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 2 | M& L for rendering in cement mortar (1:6), 15mm thick on stone masonary surfaces finished fair and even complete all as specified and directed. |
| 3 | M & L for for rendering 15mm thick in CM 1:4 on stone masonry, external surfaces finished fair & even complete all as specified and directed. |
| 4 | M & L for for rendering in cement mortar (1:4) 10mm thick as in ceiling surfaces finished fair and even complete all as specified & directed. |
| 5 | M & L for Dubbing out average 10mm thick in CM 1:4 on irregular faces of walls or concrete chajjas etc complete all as specified and directed. |
| 6 | M & L for preparation of newly plastered surface of wall and applying two coats of Distempering with 1st quality acrylic internal distemper having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over 1mm wall care putty and one coat of alkali resistant priming paint, complete all as per manufacturer's specification. |
| 7 | M & L for for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed |
| 8 | M & L for for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed |
| 9 | M & L for preparation of old plastered surface of wall and applying two coats of Distempering with 1st quality acrylic internal distemper having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over 1mm wall care putty and one coat of alkali resistant priming paint, complete all as per manufacturer's specification. |
| 10 | M & L for old plaster/rough cast plaster surface applying two coats of 100% Premium acrylic exterier paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 11 | M & L for rough cast plaster using crushed stone of size between 6 mm to 10 mm, coarse sand and cement mixed in the ratio of (1:1:1) over and including rendering coat of 15 mm thick on fair faces of brick work or concrete surfaces or stone masonry surfaces or other than fair faces of brick work or on one side of lathing (on vertical surfaces) in cement mortar 1:4 finished even and fair complete all as specified and as directed. |
| 12 | M & L for applying at new plasterd/rough cast palster surface two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 13 | Dismantling loose /disintegrated portion of RCC Chajjas, bend shelves, beams balconies,chimeny and similar work at any position or any height and dobbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces of reinforcement and provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed. |
| 14 | Demolition of cement concrete (unreinforeced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed. |
| 15 | M & L for for machine cut Kota stone slab flooring 20-25mm thick over 15mm thick screed bed in CM 1:6, laid and including jointed with grey cement slurry incluing mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 16 | M & L for for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & polishing complete all as specified & directed. |
| 17 | M & L for 75 mm thick cement concrete type D-2, 1:4:8 (40 mm graded aggregate) complete all as specified and directed. |
| 18 | M & L for PCC inter locking tile 60 mm thick ,coloured of approved quality, M-35 Grade with grey cement and pigment complete all as specified and directed. |
| 19 | M & L for laid over and incl 25 mm thick sand cushion vibrated with mechanical vibrator, complete all as specified and directed. |
| 20 | M & L for for PCC 1:2:4 Type B-1 (using 20mm stone crushed agg.) as in rounded or chamfered on edges in any description complete all as specified. |
| 21 | M & L for bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5 Kg per sq m per coat and applying plythene film black, 50 micron laid in floors complete over sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed.Note :- Water proofing compound shall be measured and paid separately. |
| 22 | Supply only water proofing compound ISI Marked complete all as specified and directed. |
| 23 | M & L PCC (1:5:10) type E-2 using 40mm graded crushed stone aggregate as in sunken floors complete all as specified and directed. |
| 24 | M & L for glazed ceramic coloured tiles, size 450 mm X 300 mm, 6-7 mm thick on vertical surfaces of wall such as dados, skirting etc set & jointed in neat slurry and pointed in white or colour cement to match over including 10 mm thick screed plaster in CM 1:4 complete all as specified and directed |
| 25 | M & L for Non-skid Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured in white or coloured cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6) complete all as specified and directed. |
| 26 | M & L for for vitrified ceramic tiles light shade 8mm thick (square / rectangular ) polished, area of each tiles exc 0.18 Sqm not exceeding 0.36 Sqm, in floor etc set and jointed in neat cment slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed . |
| 27 | M & L for for vitrified ceramic tiles light shade 8mm thick (square / rectangular ) polished, area of each tiles exc 0.18 Sqm not exceeding 0.36 sqm, in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed plaster 10mm thick in CM 1:4 complete all as specified and directed. |
| 28 | M & L for for 25mm thick PCC 1:2:4 type B-1 (using 20 mm thick crushed stone aggregate) as in sub base complete all as specified and directed. |
| 29 | Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed. |
| 30 | Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered and directed. |
| 31 | M & L for for Random Rubble stone walling uncourses, built in CM (1:6) complete all as specified and directed. |
| 32 | M & L for for Random Rubble stone walling uncourses(but except stone), built in CM (1:6) complete all as specified and directed. |
| 33 | M & L for for brick work with flyash bricks straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 34 | Demolition of Stone slabs & tiles of any description or thickness in floors , aprons etc, complete all as specified and directed. |
| 35 | M & L for 18-20mm thick black granite on door cill, kitchen platform, window cill and similar work over & including 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified & directed. |
| 36 | M & L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate 50mm thick as in plinth protection finished fair even laid in alternate bays n.exc 2m in length all as specified and directed. |
| 37 | Taking down old unserviceable shower rose & S & F for brass chromium plated shower rose of 125 mm size with swivel joints, incl. fixing to steel pipe or union of 15mm bore,Mixing valve including three joints to steel pipes or unions and plugging and screwing to walls complete all as specified and directed. |
| 38 | Supply and Fixing in repairs vitreous china One piece EWC with slim soft close seat cover including good making, etc complete including making good to floor etc complete all as specified and as directed. Make Cat No. : S1013210 or equivalent) |
| 39 | Taking down old unserviceable flushing cistern S & F for PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacity . White, with inlet ball valve, float, handle with 32mm PVC flush pipe, fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and directed. |
| 40 | Taking down old unserviceable PVC connection and S & F PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed |
| 41 | S & F for in repair Soap dish any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as sped & directed. |
| 42 | Taking out old un serviceable tubular towel rail & S & F for tubular towel rail aluminium anodised 20mm dia 'D' type 60cm long between flanges complete all as sped & directed. |
| 43 | S & F for in repairs Chromium plated concealed stop cock 15 mm dia screwed down light pressure screwed both ends for iron pipe or for union complete all as specified & directed. |
| 44 | S & F for in repairs Chromium plated Angle stop cock 15 mm dia screwed down light pressure screwed both ends for iron pipe or for union complete all as spd & directed |
| 45 | S & F for in repairs Chromium plated bib taps, with capstan heads, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed. |
| 46 | S & F for sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; in-cluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connect-ing union to rigid UPVC waste pipe bent to shape & fixed to wall with bracket overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by the Engineer-in-Charge |
| 47 | Taking down old wooden plate rack and S & F for stainless steel plate rack made of 0.50mm thick of over all size 920mm x 785 mm x 255 mm and weigt not less than 7.00 Kg of Each approved quality complete all as specified and directed. |
| 48 | Supply and fixing in repairs PVC cabinet of size 450 mm x 600 mm with mirror of good quality with shelves in bath fixed complete to walls complete all as directed by Engineer-in-Charge (Make : Prayag or eqvt). (Cat No. 555) |
| 49 | Taking up or down steel tubing and connection 15 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed. |
| 50 | Taking up or down steel tubing and connection 20 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed. |
| 51 | S & F water tubing 15 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed. |
| 52 | S & F water tubing 20 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed. |
| 53 | Refixing 15mm bore old GI tubing to walls, ceiling or laid on floor including necessary cleanig, cutting, screwing and new fittings such as elbow, Tee, union, socket, reducer etc. complete all as specified and directed. |
| 54 | Refixing 20mm bore old GI tubing to walls, ceiling or laid on floor including necessary cleanig, cutting, screwing and new fittings such as elbow, Tee, union, socket, reducer etc. complete all as specified and directed. |
| 55 | S & F for CI Nahani/Floor trap 75 mm outlet,with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) as in repairs complete all as specified and directed. |
| 56 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.50 sqm each and removing from site complete all as spd & directed and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed. |
| 57 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) all as specified and directed. |
| 58 | M & L for rolled mild steel work angle iron as in door frame (Chowkhats) & cooler stand including provn of 12mm dia deformed bar welded horizontally to bottom of frame confirming to Fe-290 or Fe-330 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed. |
| 59 | S&F solid PVC moulded door frame of size 50mm x 47mm made out of 5mm prelam coloured PVC sheet uses instead of plain colour PVC sheet & edges will be painted to match with prelam sheet as reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed. |
| 60 | S&F factory made solid PVC moulded door shutter with wood free EPS, 28to30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded Prelam (Nut Brown Colour )PVC sheet on the front face & 2mm Prelam (Nut Brown colour ) PVC sheet on back face, and fixing in the frame at site as per specification and drawings on page 161 of SSR (Part -II) 2010 complete all as specified and directed. |
| 61 | S & F second class HW Hollock/Bonsum/Sal 35mm thick, factory made, plain framed, paneled shutter (Three panels) with panels of 9mm thick BWP grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as per specified and directed. |
| 62 | S & F for 2nd class HW 35 mm thick, gauged and skeleton shutters (Three Panels), factory made open rebated and prepare to receive glass, gauge etc (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. Size of members of shutter shall be as specified in SSR 2009 Part-I, section 8 clause Member shall be kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as specified and directed. |
| 63 | Providing and fixing factory-made uPVC sliding window of approved make conforming to relevant standards, fabricated from multi-chambered uPVC extruded profiles (minimum wall thickness 2.2 mm ± 0.2 mm), reinforced with GI steel sections of minimum 1.0–1.5 mm thickness, including outer frame, sliding shutters with 3 track system as specified, all corners fusion welded.The window shutters shall be fitted with high-quality rollers, handles, multi-point locking system, interlocks, brush seals, and EPDM rubber gaskets for weather-tight sealing. The frame shall be fixed to the wall using suitable fasteners/anchor bolts with necessary packing and sealing using approved silicone sealant.The glazing shall be done with 3 mm thick clear/toughened glass as specified, fixed with glazing beads and gaskets,with sliding mosquito mesh shutter in separate track, consisting of powder-coated aluminum/uPVC frame fitted with high-quality SS wire mesh, including rollers, channels, and all necessary hardware for smooth sliding operation,and alsoProviding and fixing external MS (mild steel) safety grill, fabricated from MS bars of size 20mm square section in approved pattern/design, including cutting, welding, grinding, and finishing, fixed to the wall/window frame with MS holdfasts or anchor fasteners as required.The MS grill shall be treated with one coat of approved red oxide/zinc primer and two coats of synthetic enamel paint of approved colour and shade, complete all as specified.The item shall include all materials, labour, T&P, scaffolding, transportation, loading/unloading, sealing, finishing, and incidentals, complete in all respects as per specifications and direction of Engineer-in-Charge. |
| 64 | M&L18/19mm thick block board grade-.II quality, interior grade with decorative type with decorative face veneer on one face fixed complete, including teak wood lipping 19 x 6mm thick fixed with nails in shelves, partition and palmet boxes, shelves, almirah book cases, toilet boxes, racks, cup board shutter and similar works all as spepcified and directed. |
| 65 | S & F for in repair Deco door seal size 1.5\\" width door bottom sealing strip draft Excluder stopper with aluminium plate & nylon bristles for weather stripping complete all as specified and directed. |
| 66 | M & L for 20 to 25 mm thick machine cut kota stone Shelves incl rubbing & polishing and set in CM (1:4) incl cutting inserting into wall not less than 50mm deep and making good to disturbed surfaces complete all as specified and directed. |
| 67 | S & F continuous (piano) hinges, mild steel, bright finish width of flaps (when open ) 40 mm all as specified and directed. |
| 68 | M & L for for IInd class H/W Plain , Solid , Straight chowkats and frames sec area n exe 40 sqcm complete and all as specified.. |
| 69 | S & F 100mm size hasp and staple, aluminium anodised safety type, fixed with screws complete all as specified and directed. |
| 70 | S & F 300mm long aluminium alloy,anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 71 | S & F extruded aluminium handle fabricated type, anodised 150mm size conforming to IS complete all as specified and directed. |
| 72 | S & F for aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed. |
| 73 | S & F 125mm single action spring hinges,mild steel with steel wire spring, stove enaelled black, complete all as specified and directed. |
| 74 | S & F for mild steel butt hinges, medium weight, cold rolled, ISI marked of size 100 mm, complete all as specified and directed. |
| 75 | S & F for stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with wire staples complete all as specified & directed. |
| 76 | M & L for preparation of new wooden surface over 10cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer complete all as specified and directed. |
| 77 | M & L for for preparation of new steel surface over 10cm width or grith & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as specified & directed. |
| 78 | S & F for 3.00 mm thick sheet glass, ordinary / figured quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as specified & directed. |
| 79 | S & F for in repairs 25mm dia mild steel chromium plated curtain rod and decorative type knobs and curtain rod bracket with chromium plated U shaped support clamp suitable for 25mm dia rod complete all as specified and directed. |
| 80 | M&L for crack repair in wall, ceiling and roof with CM 1:3 mixed with water proofing compound @3% by weight of cement, width of crack is 25mm and 50mm deep including necessary demolition and making good disturbed surface complete all as specified & directed. Note :- WPC measured and paid separately |
| 81 | Supply and fixing in repairs for Toilet fittings Wall mixer (wall mounted model) with 1.5m flexible tube and hook complete all as specified and directed by Engr-in-Charge (Make : Jaquar or equivalent ). (Cat No. CON - 217 KN) |
| 82 | Dismantling of existing unserviceable RCC/PVC water tank and S&F 1000 litre capacity rotational moulded polythene water storage tanks double layer (cylindrical vertical with closed top) hoisted & fixed in position complete all as spcified. |
| 83 | S & F for ball valves PTMT high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe, 20mm bore compete (Minimum weight 210 gm) complete all as specified & directed. |
| 84 | S & F for in repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 25 mm dia, ISI marked complete all as specified & directed. |
| 85 | M & L for 50 mm thick sand stone slabs; set and jointed over joists etc. in CM 1:4 as in base of water tank and M & L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5mm stone crushed agg.) finished concrete surfaces even & smooth complete all as specified and directed |
| 86 | Taking down existing unservicable treatment of any description including cement plaster/conctrete any thickness from roof surface cleaning of roof surfaces and and preparing it for further treatment and removing rubbish from the site up to 50 mtrs complete all as specified and directed. |
| 87 | M & L for for screeding 10mm thick in CM 1:4 on fair faces of RCC /stone patti roof surface finished fair & even without using extra cement even and rate of WPC including complete all as spescified and directed. |
| 88 | M & L for for five layered APP modified polymeric water proofing membrane , 2.10mm thick having centre core not less than 100 micron high molecular high density polythylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 micron HMHDPE film weight not less than 3.00 Kg/Sqm applied with bonding material using blown type bitumen conforming to IS-702 grade 85/25 @1.20 Kg/Sqm over bitumen primer conforming to IS-3384 @0.40 Kg/Sqm with final coat of bonding bitumen grade 85/25 @1.20 Kg/Sqm over APP membrane with all overlaps complete all as specified and directed. |
| 89 | Material and labour for 40mm thick (average consolidated thickness) PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate laid in slope as in padding, finished even and smooth on existing slope including provision of 'V' shaped groove 6mm wide and 10mm deep at 1.20 metre interval or parts thereof, both ways on top of PCC padding and filled with mastic bitumen of (1:1) proportion and including coveat fillet complete all as specified and directed. |
| 90 | Taking out of old grill & M & L framed work such as grills, gratings, etc, with ends of bars shouledered and /or reiveted ,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of watertanks and similar work coforming to Fe 290m Gde E-165 complete all as spd and directed. |
| 91 | M & L for for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in surface channel and drain etc complete all as specified. |
| 92 | Taking down CI pipe 100/75 mm fixed wall and floor etc including accessories complete all as specified and directed. |
| 93 | S & F for in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 94 | S & F 75mm bore PVC(SWR) bends with oval access door of any radius complete all as specified and directed. |
| 95 | S & F110mm bore PVC(SWR) bends with oval access door of any radius complete all as specified and directed. |
| 96 | S & F for in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 97 | S & F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed |
| 98 | S & F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed |
| 99 | S & F for only stack clamp out of 50mm by 5mm flat iron and 16 mm dia round iron stays fixed to pipe of bore 100mm complete all as specified. |
| 100 | S & F for PVC bend/ shoe of dia. 110mm complete all as specified incl. taking down old unserviceable complete all as specified. |
| 101 | Taking down old unserviceable WHB and S & F for wash hand basin vitreous china white /colour flat size 550 x 400mm fixed including waste coupling, waste pipe ,complete all as specified and directed. (Cat Part No - 4653 Prayag & equivalent of Johnson, Cera and Parryeare) |
| 102 | S&F in repair Swanneck pillar tap, cast copper alloy fency type chromium plated screwed down high, pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed to 15mm bore of pipe complete all as specified and directed. |
| 103 | Fabrication & fitting of kitchen with cabinet/shelves & wardrobe/cupboard made out of 18mm thick (one side decorative lamination & other side baancing lamination) PVC sheet with piano hinges including providing cabinet for keeping baskets / cutlery baskket with handles/door shutters complete all as specified and directed.Note :- PVC sheet, fitting & fixture will be measured and paid separately as supply only. |
| 104 | Supply only in repairs 18mm thick (one side decorative lamination & other side baancing lamination) solid PVC board with cement solvent adhesive for shutter/kitchen cabinet / cup board/partition wall/ wall cabinet complete all as specified and directed. Make :- Raj shree or equivalent as approved by GE. |
| 105 | Supply only 125 mm dia oval shape brass handle fancy type bright finish complete all as specified & directed. |
| 106 | Supply only in repair stainless steel basket (plain) of approved quality of size 520 X 485 X 100mm complete all as spepcified and directed.Make :- Godrej SS 304 or equivalent as approve by GE. |
| 107 | Supply only in repair stainless steel plate basket of approved quality of size 520 X 485 X 150mm complete all as spepcified and directed.Make :- Godrej SS 304 or equivalent as approve by GE. |
| 108 | Supply only basket / trolly channel 50cm long extruded MS galvanised over roller complete all as spepcified and directed. |
| 109 | M & L for cutting of RCC Chajja of any thickness and any width complete all as spepcified and directed. |
| 110 | M & L for Cleaning of sewage line by roding manhole to manhole, manually, removing sludge/foreign material completely and making smooth flow of sewage water for any dia bore pipes complete all as specified & directed. Please Enable Macros to View BoQ information |
| 111 | M & L for Cleaning of sewage line by roding manhole to manhole, manually, removing sludge/foreign material completely and making smooth flow of sewage water for any dia bore pipes complete all as specified & directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender