Tender For Lot-3 Package: Hydro-Mechanical Works For All Gates And Pressure Shaft Liners For The Implementation Of The 260 Mw Dulhasti Stage-Ii H.E Project, In Kishtwar District Of Ut Of J&K, India
Tender Value
131.23 Crore
Estimated cost
Bid Submission
20 Nov 2026
33 days left
EMD
1.97 Crore
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kishtwar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Lot-3 Package: Hydro-Mechanical Works For All Gates And Pressure Shaft Liners For The Implementation Of The 260 Mw Dulhasti Stage-Ii H.E Project, In Kishtwar District Of Ut Of J&K, India
BOQ
| Sl. No. | Item Description |
| 1 | Intake Gates & Hydraulic Hoists |
| 2 | Low Level Intake Gate & Hydraulic Hoist |
| 3 | Low Level Intake Gate (Fixed wheel type), dogging arrangement and gate inter-piece lock arrangement (as per existing arrangement) complete in all respect. |
| 4 | Suspension bars assembly (as per existing arrangement) for the connection of gate with hydraulic hoist complete in all respect. |
| 5 | Hydraulic Cylinder (130T Cap.) single acting with gate position indication complete in all respect with control equipment etc. for 1.11. |
| 6 | Hydraulic Power packs complete in all respect including Piping, Electrical Control Panels etc. for 1.13. |
| 7 | Hoist supporting structure, ratelier rack with embedded parts and maintenance platform with hand winch (mural hoist) (as per existing arrangement). |
| 8 | Monorail Hoist (min. 0.5T Cap.) with monorail beam and fixtures etc. complete in all respect common for lower and intermediate level intake gate (as per existing arrangement). |
| 9 | Mandatory Spare Parts (As per statement-IB) |
| 10 | Intermediate Level Intake Gate & Hydraulic Hoist |
| 11 | Intermediate Level Intake Gate (Fixed wheel type), dogging arrangement and gate inter-piece lock arrangement (as per existing arrangement) complete in all respect. |
| 12 | Suspension bars assembly (as per existing arrangement) for the connection of gate with hydraulic hoist complete in all respect. |
| 13 | Hydraulic Cylinder (85T Cap.) single acting with gate position indication complete in all respect with control equipment etc. for 1.21. |
| 14 | Hydraulic Power packs complete in all respect including Piping, Electrical Control Panels etc. for 1.23. |
| 15 | Hoist supporting structure, ratelier rack with embedded parts and maintenance platform with hand winch (mural hoist) (as per existing arrangement). |
| 16 | Mandatory Spare Parts (As per statement-IB) |
| 17 | Upper Level Intake Gate & Hydraulic Hoist |
| 18 | Upper Level Intake Gate (Fixed wheel type), dogging arrangement and gate inter-piece lock arrangement (as per existing arrangement) complete in all respect. |
| 19 | Suspension bars assembly (as per existing arrangement) for the connection of gate with hydraulic hoist complete in all respect. |
| 20 | Hydraulic Cylinder (50T Cap.) single acting with gate position indication complete in all respect with control equipment etc. for 1.31. |
| 21 | Hydraulic Power packs complete in all respect including Piping, Electrical Control Panels etc. for 1.33. |
| 22 | Hoist supporting structure, ratelier rack with embedded parts and maintenance platform with hand winch (mural hoist) (as per existing arrangement). |
| 23 | Monorail Hoist (min. 0.5T Cap.) with monorail beam and fixtures etc. complete in all respect. |
| 24 | Mandatory Spare Parts (As per statement-IB) |
| 25 | Intake Stoplogs & Monorail Hoist: |
| 26 | Low, Intermediate & Upper Level Intake Stoplogs (Slide type), one set for each intake (as per existing arrangement) |
| 27 | Monorail (2 x7T Cap.) hoist with lifting beam complete in all respect and control equipment for 2.1 to suit existing monorail beam |
| 28 | Mandatory Spare Parts (As per statement-IB) |
| 29 | Desilting Chamber Inlet Gates & Rope Drum Hoists |
| 30 | Desilting Chamber Inlet Gate (Fixed wheel type) |
| 31 | First Stage Embedded Parts for 3.1 |
| 32 | Second Stage Embedded Parts including dogging etc. for 3.1 |
| 33 | Rope Drum Hoist complete in all respect and control equipment for 3.1 |
| 34 | Hoist supporting structure & trestle etc. for 3.4. |
| 35 | Mandatory Spare Parts (As per statement-IB) |
| 36 | Desilting Chamber Outlet Gates & EOT Crane |
| 37 | Desilting Chamber outlet Gate (Slide type) |
| 38 | First Stage Embedded Parts for 4.1 including air vent pipe (500mm dia.) |
| 39 | Second Stage Embedded Parts including dogging etc. for 4.1 |
| 40 | EOT Crane including rails, fixtures etc. complete in all respect and control equipment for 4.1 with control equipment.. |
| 41 | Mandatory Spare Parts (As per statement-IB) |
| 42 | Silt Flushing Tunnel Steel liner |
| 43 | Silt flushing tunnel steel liner 2.6m diameter |
| 44 | Silt Flushing Tunnel (Service & Emergency) & Hydraulic Hoists |
| 45 | Silt Flushing Tunnel Service & Emergency Gates (Slide Type) |
| 46 | First Stage Embedded Parts for 6.1 with 300mm dia. air-vent pipe, steel liner, bonnet and bonnet cover, hoist supporting structure and dogging arrangement. |
| 47 | Hydraulic cylinder (double acting) with arrangement for gate position indication and control equipment complete in all respect for 6.1 |
| 48 | Hydraulic Power packs complete in all respect including Piping, Electrical Control Panels etc. for 6.3 |
| 49 | Mandatory Spare Parts (As per statement-IB) |
| 50 | Surge Shaft Gate & Rope Drum Hoist |
| 51 | Surge Shaft Gate (Fixed wheel type) |
| 52 | First Stage Embedded Parts with reception frame for 7.1 including air vent pipe (300mm dia.) |
| 53 | Second Stage Embedded Parts including dogging etc. for 7.1 |
| 54 | Rope drum hoist complete in all respect and control equipment for 7.1 with hydraulic motor and Power Pack |
| 55 | Hoist supporting structure & trestle etc. for 7.4 |
| 56 | Mandatory Spare Parts (As per statement-IB) |
| 57 | Pressure Shaft Steel Liner/ Penstock |
| 58 | Steel transition of Pressure Shaft Steel Liner at D/s Surge shaft including matching piece with surge shaft reception frame |
| 59 | Dia 7.0m circular steel liner of upper horizontal portion |
| 60 | Dia 7.0m circular steel liner of upper vertical bend (UVB) |
| 61 | Dia 7.0m circular steel liner of vertical pressure shaft |
| 62 | Dia 7.0m circular steel liner lower vertical Bend (LVB) |
| 63 | 7.0m circular steel liner lower Horizontal with Steel manifold (Bifurcation) with inlet dia. 7.0m bifurcating into two branch pipes of internal dia. 5.0m each (Upstream of MIV). |
| 64 | Circular reducer steel liner inlet dia 5.0m and outlet dia of 4m of lower horizontal portion |
| 65 | Dia 4.0m circular steel liner of lower horizontal portion (Downstream of MIV) |
| 66 | 4.0m circular steel liner (extra /matching piece) of length 600mm. |
| 67 | Draft Tube Gates and Rope Drum Hoists |
| 68 | Draft Tube Gates (Fixed wheel type) |
| 69 | First Stage Embedded Parts incl. 300mm dia Air Vent Pipe etc. for 9.1 |
| 70 | Second Stage Embedded Parts including dogging etc. for 9.1 |
| 71 | Rope Drum Hoist complete in all respect and control equipment etc. for 9.1 |
| 72 | Hoist supporting structure & trestle etc for Draft Tube gates etc. for 9.4 |
| 73 | Mandatory Spare Parts (As per statement-IB) |
| 74 | Tail Race Gate and Rope Drum Hoist |
| 75 | Tailrace Tunnel Gate (Fixed wheel type) |
| 76 | First Stage Embedded Parts incl. 300mm dia Air Vent Pipe etc. for 10.1 |
| 77 | Second Stage Embedded Parts including dogging arrangement etc. for 10.1 |
| 78 | Rope drum hoist complete in all respect and control equipment for 10.1 |
| 79 | Hoist supporting structure & trestle etc for Tail Race gate for 10.4 |
| 80 | Mandatory Spare Parts (As per statement 1B) |
| 81 | Adit Gates |
| 82 | Adit Gates (Hinge type) |
| 83 | First Stage Embedded Parts for11.1 |
| 84 | Second Stage Embedded Parts for 11.1 |
| 85 | Instrumentation and Remote Control System |
| 86 | A). PLC based remote control system complete in all respects as described in GTS/ PTS.B). Following instruments shall also be provided at their respective locations complete in all respect and is not part of PLC systemi. Three (3) Sets of non-contacting microwave type water level measuring and indication equipment at intake area (for balanced head measurement across intake trashrack & intake gates).ii. Two (2) sets of water level measuring system including guiding pipes to indicate balance head condition of Desilting Chamber Inlet Gates.iii. Two (2) sets of water level measuring system including guiding pipes to indicate balance head condition of Desilting Chamber Outlet Gates.iv. One (1) set of water level measuring system including guiding pipes to indicate balance head condition of Surge Shaft Gate.v. Two (2) set of water level measuring system including guiding pipes to indicate balance head condition of Draft Tube Gate.vi. One (1) set of water level measuring system including guiding pipes to indicate balance head condition of Tail race Gate.C) Main Distribution BoardD) Feeder pillar for all HM equipment. |
| 87 | Mandatory spare parts (As per Statement 1B) |
| 88 | Diesel Generator Set |
| 89 | Diesel Generator Set (320 KVA) complete in all respect with Mounting Frame, acoustic enclosure, control panels and change-over system etc. |
| 90 | Mandatory spare parts (As per Statement 1B) |
| 91 | Oil Filter unit along with contamination checking kit & low vacuum dehydration and degasification unit |
| 92 | Oil Filter unit along with contamination checking kit & low vacuum dehydration and degasification unit |
| 93 | Mandatory spare parts (As per Statement 1B) |
| 94 | Mandatory Tools & Tackles (As per statement-1A) |
| 95 | Intake Gates & Hydraulic Hoists |
| 96 | Low Level Intake Gate & Hydraulic Hoist |
| 97 | Low Level Intake Gate (Fixed wheel type), dogging arrangement and gate inter-piece lock arrangement (as per existing arrangement) complete in all respect. |
| 98 | Suspension bars assembly (as per existing arrangement) for the connection of gate with hydraulic hoist complete in all respect. |
| 99 | Hydraulic Cylinder (130T Cap.) single acting with gate position indication complete in all respect with control equipment etc. for 1.11. |
| 100 | Hydraulic Power packs complete in all respect including Piping, Electrical Control Panels etc. for 1.13. |
| 101 | Hoist supporting structure, ratelier rack with embedded parts and maintenance platform with hand winch (mural hoist) (as per existing arrangement). |
| 102 | Monorail Hoist (min. 0.5T Cap.) with monorail beam and fixtures etc. complete in all respect common for lower and intermediate level intake gate (as per existing arrangement). |
| 103 | Mandatory Spare Parts (As per statement-IB) |
| 104 | Intermediate Level Intake Gate & Hydraulic Hoist |
| 105 | Intermediate Level Intake Gate (Fixed wheel type), dogging arrangement and gate inter-piece lock arrangement (as per existing arrangement) complete in all respect. |
| 106 | Suspension bars assembly (as per existing arrangement) for the connection of gate with hydraulic hoist complete in all respect. |
| 107 | Hydraulic Cylinder (85T Cap.) single acting with gate position indication complete in all respect with control equipment etc. for 1.21. |
| 108 | Hydraulic Power packs complete in all respect including Piping, Electrical Control Panels etc. for 1.23. |
| 109 | Hoist supporting structure, ratelier rack with embedded parts and maintenance platform with hand winch (mural hoist) (as per existing arrangement). |
| 110 | Mandatory Spare Parts (As per statement-IB) |
| 111 | Upper Level Intake Gate & Hydraulic Hoist |
| 112 | Upper Level Intake Gate (Fixed wheel type), dogging arrangement and gate inter-piece lock arrangement (as per existing arrangement) complete in all respect. |
| 113 | Suspension bars assembly (as per existing arrangement) for the connection of gate with hydraulic hoist complete in all respect. |
| 114 | Hydraulic Cylinder (50T Cap.) single acting with gate position indication complete in all respect with control equipment etc. for 1.31. |
| 115 | Hydraulic Power packs complete in all respect including Piping, Electrical Control Panels etc. for 1.33. |
| 116 | Hoist supporting structure, ratelier rack with embedded parts and maintenance platform with hand winch (mural hoist) (as per existing arrangement). |
| 117 | Monorail Hoist (min. 0.5T Cap.) with monorail beam and fixtures etc. complete in all respect. |
| 118 | Mandatory Spare Parts (As per statement-IB) |
| 119 | Intake Stoplogs & Monorail Hoist: |
| 120 | Low, Intermediate & Upper Level Intake Stoplogs (Slide type), one set for each intake (as per existing arrangement) |
| 121 | Monorail (2 x7T Cap.) hoist with lifting beam complete in all respect and control equipment for 2.1 to suit existing monorail beam |
| 122 | Mandatory Spare Parts (As per statement-IB) |
| 123 | Desilting Chamber Inlet Gates & Rope Drum Hoists |
| 124 | Desilting Chamber Inlet Gate (Fixed wheel type) |
| 125 | First Stage Embedded Parts for 3.1 |
| 126 | Second Stage Embedded Parts including dogging etc. for 3.1 |
| 127 | Rope Drum Hoist complete in all respect and control equipment for 3.1 |
| 128 | Hoist supporting structure & trestle etc. for 3.4. |
| 129 | Mandatory Spare Parts (As per statement-IB) |
| 130 | Desilting Chamber Outlet Gates & EOT Crane |
| 131 | Desilting Chamber outlet Gate (Slide type) |
| 132 | First Stage Embedded Parts for 4.1 including air vent pipe (500mm dia.) |
| 133 | Second Stage Embedded Parts including dogging etc. for 4.1 |
| 134 | EOT Crane including rails, fixtures etc. complete in all respect and control equipment for 4.1 with control equipment.. |
| 135 | Mandatory Spare Parts (As per statement-IB) |
| 136 | Silt Flushing Tunnel Steel liner |
| 137 | Silt flushing tunnel steel liner 2.6m diameter |
| 138 | Silt Flushing Tunnel (Service & Emergency) & Hydraulic Hoists |
| 139 | Silt Flushing Tunnel Service & Emergency Gates (Slide Type) |
| 140 | First Stage Embedded Parts for 6.1 with 300mm dia. air-vent pipe, steel liner, bonnet and bonnet cover, hoist supporting structure and dogging arrangement. |
| 141 | Hydraulic cylinder (double acting) with arrangement for gate position indication and control equipment complete in all respect for 6.1 |
| 142 | Hydraulic Power packs complete in all respect including Piping, Electrical Control Panels etc. for 6.3 |
| 143 | Mandatory Spare Parts (As per statement-IB) |
| 144 | Surge Shaft Gate & Rope Drum Hoist |
| 145 | Surge Shaft Gate (Fixed wheel type) |
| 146 | First Stage Embedded Parts with reception frame for 7.1 including air vent pipe (300mm dia.) |
| 147 | Second Stage Embedded Parts including dogging etc. for 7.1 |
| 148 | Rope drum hoist complete in all respect and control equipment for 7.1 with hydraulic motor and Power Pack |
| 149 | Hoist supporting structure & trestle etc. for 7.4 |
| 150 | Mandatory Spare Parts (As per statement-IB) |
| 151 | Pressure Shaft Steel Liner/ Penstock |
| 152 | Steel transition of Pressure Shaft Steel Liner at D/s Surge shaft including matching piece with surge shaft reception frame |
| 153 | Dia 7.0m circular steel liner of upper horizontal portion |
| 154 | Dia 7.0m circular steel liner of upper vertical bend (UVB) |
| 155 | Dia 7.0m circular steel liner of vertical pressure shaft |
| 156 | Dia 7.0m circular steel liner lower vertical Bend (LVB) |
| 157 | 7.0m circular steel liner lower Horizontal with Steel manifold (Bifurcation) with inlet dia. 7.0m bifurcating into two branch pipes of internal dia. 5.0m each (Upstream of MIV). |
| 158 | Circular reducer steel liner inlet dia 5.0m and outlet dia of 4m of lower horizontal portion |
| 159 | Dia 4.0m circular steel liner of lower horizontal portion (Downstream of MIV) |
| 160 | 4.0m circular steel liner (extra /matching piece) of length 600mm. |
| 161 | Draft Tube Gates and Rope Drum Hoists |
| 162 | Draft Tube Gates (Fixed wheel type) |
| 163 | First Stage Embedded Parts incl. 300mm dia Air Vent Pipe etc. for 9.1 |
| 164 | Second Stage Embedded Parts including dogging etc. for 9.1 |
| 165 | Rope Drum Hoist complete in all respect and control equipment etc. for 9.1 |
| 166 | Hoist supporting structure & trestle etc for Draft Tube gates etc. for 9.4 |
| 167 | Mandatory Spare Parts (As per statement-IB) |
| 168 | Tail Race Gate and Rope Drum Hoist |
| 169 | Tailrace Tunnel Gate (Fixed wheel type) |
| 170 | First Stage Embedded Parts incl. 300mm dia Air Vent Pipe etc. for 10.1 |
| 171 | Second Stage Embedded Parts including dogging arrangement etc. for 10.1 |
| 172 | Rope drum hoist complete in all respect and control equipment for 10.1 |
| 173 | Hoist supporting structure & trestle etc for Tail Race gate for 10.4 |
| 174 | Mandatory Spare Parts (As per statement 1B) |
| 175 | Adit Gates |
| 176 | Adit Gates (Hinge type) |
| 177 | First Stage Embedded Parts for11.1 |
| 178 | Second Stage Embedded Parts for 11.1 |
| 179 | Instrumentation and Remote Control System |
| 180 | A). PLC based remote control system complete in all respects as described in GTS/ PTS.B). Following instruments shall also be provided at their respective locations complete in all respect and is not part of PLC systemi. Three (3) Sets of non-contacting microwave type water level measuring and indication equipment at intake area (for balanced head measurement across intake trashrack & intake gates).ii. Two (2) sets of water level measuring system including guiding pipes to indicate balance head condition of Desilting Chamber Inlet Gates.iii. Two (2) sets of water level measuring system including guiding pipes to indicate balance head condition of Desilting Chamber Outlet Gates.iv. One (1) set of water level measuring system including guiding pipes to indicate balance head condition of Surge Shaft Gate.v. Two (2) set of water level measuring system including guiding pipes to indicate balance head condition of Draft Tube Gate.vi. One (1) set of water level measuring system including guiding pipes to indicate balance head condition of Tail race Gate.C) Main Distribution BoardD) Feeder pillar for all HM equipment. |
| 181 | Mandatory spare parts (As per Statement 1B) |
| 182 | Diesel Generator Set |
| 183 | Diesel Generator Set (320 KVA) complete in all respect with Mounting Frame, acoustic enclosure, control panels and change-over system etc. |
| 184 | Mandatory spare parts (As per Statement 1B) |
| 185 | Oil Filter unit along with contamination checking kit & low vacuum dehydration and degasification unit |
| 186 | Oil Filter unit along with contamination checking kit & low vacuum dehydration and degasification unit |
| 187 | Mandatory spare parts (As per Statement 1B) |
| 188 | Mandatory Tools & Tackles (As per statement-1A) |
| 189 | Intake Gates & Hydraulic Hoists |
| 190 | Low Level Intake Gate & Hydraulic Hoist |
| 191 | Low Level Intake Gate (Fixed wheel type), dogging arrangement and gate inter-piece lock arrangement (as per existing arrangement) complete in all respect. |
| 192 | Suspension bars assembly (as per existing arrangement) for the connection of gate with hydraulic hoist complete in all respect. |
| 193 | Hydraulic Cylinder (130T Cap.) single acting with gate position indication complete in all respect with control equipment etc. for 1.11. |
| 194 | Hydraulic Power packs complete in all respect including Piping, Electrical Control Panels etc. for 1.13. |
| 195 | Hoist supporting structure, ratelier rack with embedded parts and maintenance platform with hand winch (mural hoist) (as per existing arrangement). |
| 196 | Monorail Hoist (min. 0.5T Cap.) with monorail beam and fixtures etc. complete in all respect common for lower and intermediate level intake gate (as per existing arrangement). |
| 197 | Intermediate Level Intake Gate & Hydraulic Hoist |
| 198 | Intermediate Level Intake Gate (Fixed wheel type), dogging arrangement and gate inter-piece lock arrangement (as per existing arrangement) complete in all respect. |
| 199 | Suspension bars assembly (as per existing arrangement) for the connection of gate with hydraulic hoist complete in all respect. |
| 200 | Hydraulic Cylinder (85T Cap.) single acting with gate position indication complete in all respect with control equipment etc. for 1.21. |
| 201 | Hydraulic Power packs complete in all respect including Piping, Electrical Control Panels etc. for 1.23. |
| 202 | Hoist supporting structure, ratelier rack with embedded parts and maintenance platform with hand winch (mural hoist) (as per existing arrangement). |
| 203 | Upper Level Intake Gate & Hydraulic Hoist |
| 204 | Upper Level Intake Gate (Fixed wheel type), dogging arrangement and gate inter-piece lock arrangement (as per existing arrangement) complete in all respect. |
| 205 | Suspension bars assembly (as per existing arrangement) for the connection of gate with hydraulic hoist complete in all respect. |
| 206 | Hydraulic Cylinder (50T Cap.) single acting with gate position indication complete in all respect with control equipment etc. for 1.31. |
| 207 | Hydraulic Power packs complete in all respect including Piping, Electrical Control Panels etc. for 1.33. |
| 208 | Hoist supporting structure, ratelier rack with embedded parts and maintenance platform with hand winch (mural hoist) (as per existing arrangement). |
| 209 | Monorail Hoist (min. 0.5T Cap.) with monorail beam and fixtures etc. complete in all respect. |
| 210 | Intake Stoplogs & Monorail Hoist: |
| 211 | Low, Intermediate & Upper Level Intake Stoplogs (Slide type), one set for each intake (as per existing arrangement) |
| 212 | Monorail (2 x7T Cap.) hoist with lifting beam complete in all respect and control equipment for 2.1 to suit existing monorail beam |
| 213 | Desilting Chamber Inlet Gates & Rope Drum Hoists |
| 214 | Desilting Chamber Inlet Gate (Fixed wheel type) |
| 215 | First Stage Embedded Parts for 3.1 |
| 216 | Second Stage Embedded Parts including dogging etc. for 3.1 |
| 217 | Rope Drum Hoist complete in all respect and control equipment for 3.1 |
| 218 | Hoist supporting structure & trestle etc. for 3.4. |
| 219 | Desilting Chamber Outlet Gates & EOT Crane |
| 220 | Desilting Chamber outlet Gate (Slide type) |
| 221 | First Stage Embedded Parts for 4.1 including air vent pipe (500mm dia.) |
| 222 | Second Stage Embedded Parts including dogging etc. for 4.1 |
| 223 | EOT Crane including rails, fixtures etc. complete in all respect and control equipment for 4.1 with control equipment.. |
| 224 | Silt Flushing Tunnel Steel liner |
| 225 | Silt flushing tunnel steel liner 2.6m diameter |
| 226 | Silt Flushing Tunnel (Service & Emergency) & Hydraulic Hoists |
| 227 | Silt Flushing Tunnel Service & Emergency Gates (Slide Type) |
| 228 | First Stage Embedded Parts for 6.1 with 300mm dia. air-vent pipe, steel liner, bonnet and bonnet cover, hoist supporting structure and dogging arrangement. |
| 229 | Hydraulic cylinder (double acting) with arrangement for gate position indication and control equipment complete in all respect for 6.1 |
| 230 | Hydraulic Power packs complete in all respect including Piping, Electrical Control Panels etc. for 6.3 |
| 231 | Surge Shaft Gate & Rope Drum Hoist |
| 232 | Surge Shaft Gate (Fixed wheel type) |
| 233 | First Stage Embedded Parts with reception frame for 7.1 including air vent pipe (300mm dia.) |
| 234 | Second Stage Embedded Parts including dogging etc. for 7.1 |
| 235 | Rope drum hoist complete in all respect and control equipment for 7.1 with hydraulic motor and Power Pack |
| 236 | Hoist supporting structure & trestle etc. for 7.4 |
| 237 | Pressure Shaft Steel Liner/ Penstock |
| 238 | Steel transition of Pressure Shaft Steel Liner at D/s Surge shaft including matching piece with surge shaft reception frame |
| 239 | Dia 7.0m circular steel liner of upper horizontal portion |
| 240 | Dia 7.0m circular steel liner of upper vertical bend (UVB) |
| 241 | Dia 7.0m circular steel liner of vertical pressure shaft |
| 242 | Dia 7.0m circular steel liner lower vertical Bend (LVB) |
| 243 | 7.0m circular steel liner lower Horizontal with Steel manifold (Bifurcation) with inlet dia. 7.0m bifurcating into two branch pipes of internal dia. 5.0m each (Upstream of MIV). |
| 244 | Circular reducer steel liner inlet dia 5.0m and outlet dia of 4m of lower horizontal portion |
| 245 | Dia 4.0m circular steel liner of lower horizontal portion (Downstream of MIV) |
| 246 | 4.0m circular steel liner (extra /matching piece) of length 600mm. |
| 247 | Draft Tube Gates and Rope Drum Hoists |
| 248 | Draft Tube Gates (Fixed wheel type) |
| 249 | First Stage Embedded Parts incl. 300mm dia Air Vent Pipe etc. for 9.1 |
| 250 | Second Stage Embedded Parts including dogging etc. for 9.1 |
| 251 | Rope Drum Hoist complete in all respect and control equipment etc. for 9.1 |
| 252 | Hoist supporting structure & trestle etc for Draft Tube gates etc. for 9.4 |
| 253 | Tail Race Gate and Rope Drum Hoist |
| 254 | Tailrace Tunnel Gate (Fixed wheel type) |
| 255 | First Stage Embedded Parts incl. 300mm dia Air Vent Pipe etc. for 10.1 |
| 256 | Second Stage Embedded Parts including dogging arrangement etc. for 10.1 |
| 257 | Rope drum hoist complete in all respect and control equipment for 10.1 |
| 258 | Hoist supporting structure & trestle etc for Tail Race gate for 10.4 |
| 259 | Adit Gates |
| 260 | Adit Gates (Hinge type) |
| 261 | First Stage Embedded Parts for11.1 |
| 262 | Second Stage Embedded Parts for 11.1 |
| 263 | Instrumentation and Remote Control System |
| 264 | A). PLC based remote control system complete in all respects as described in GTS/ PTS.B). Following instruments shall also be provided at their respective locations complete in all respect and is not part of PLC systemi. Three (3) Sets of non-contacting microwave type water level measuring and indication equipment at intake area (for balanced head measurement across intake trashrack & intake gates).ii. Two (2) sets of water level measuring system including guiding pipes to indicate balance head condition of Desilting Chamber Inlet Gates.iii. Two (2) sets of water level measuring system including guiding pipes to indicate balance head condition of Desilting Chamber Outlet Gates.iv. One (1) set of water level measuring system including guiding pipes to indicate balance head condition of Surge Shaft Gate.v. Two (2) set of water level measuring system including guiding pipes to indicate balance head condition of Draft Tube Gate.vi. One (1) set of water level measuring system including guiding pipes to indicate balance head condition of Tail race Gate.C) Main Distribution BoardD) Feeder pillar for all HM equipment. |
| 265 | Diesel Generator Set |
| 266 | Diesel Generator Set (320 KVA) complete in all respect with Mounting Frame, acoustic enclosure, control panels and change-over system etc. |
| 267 | Oil Filter unit along with contamination checking kit & low vacuum dehydration and degasification unit |
| 268 | Oil Filter unit along with contamination checking kit & low vacuum dehydration and degasification unit |
| 269 | SUB TOTAL FOR PRICE SCHEDULE-1 |
| 270 | SUB TOTAL FOR PRICE SCHEDULE-2 |
| 271 | SUB TOTAL FOR PRICE SCHEDULE-3 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 33 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 36 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender