Tender For Laying Cut Stone Flooring In Temple Praharam And Doing Borewell Works In Arulmigu Ponniamman Temple At Oragadam Village ,Sriperumpudhur Taluk,Kancheepuram District.
Tender Value
17.47 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
13 days left
EMD
17500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Laying Cut Stone Flooring In Temple Praharam And Doing Borewell Works In Arulmigu Ponniamman Temple At Oragadam Village ,Sriperumpudhur Taluk,Kancheepuram District.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation by manual means for RR/Brick and Other step type footings for Load bearing structures in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers. |
| 2 | Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 3 | Supply and filling in foundation and basement with Gravel in layers of not more than 15cm.thick well rammed watered and compacted with surface vibrator, watered and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 4 | Cement concrete 1:5:10 (One part of cement five part of M-sand and ten part of HBG jelly) for foundation using 40mm gauge HBG jelly inclusive of shoring strutting and baling out water where ever necessary ramming curing etc.,complete as per Std, Specification and as directed by the Dept, Officers |
| 5 | Flooring with cut stone slab of size 600 x 600mm and other sizes suitable for site requirement not less than 100mm thick with machine cut edges and top surface dressed as directed by the departmental officers including cost and conveyance of materials to site and labour charges for paving and pointing with cement mortar 1:3 (one part of cement and three part of sand) etc all complete complying with standard specification. |
| 6 | Dressing one line |
| 7 | Brick work in Cement Mortar 1:5 (one part of cement and five part of sand) using best quality Burnt Clay Brick of size 9\\" x 43/8\\" x 23/4\\" with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. |
| 8 | For foundation and basement |
| 9 | Plastering with Cement Mortar 1:5 (one part of cement and five part of sand). 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 10 | Painting two coats of newly plastered wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers. |
| 11 | Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site (Site will be shown by the Department Officers) including construction of mud pit. |
| 12 | upto 60 m depth |
| 13 | from 60 m to 90 m depth |
| 14 | Supply of 150mm dia special blue PVC CASING PIPE as per IS 12818/2010 etc., complete as directed by the departmental officers. The pipe should be got approved by the Engineer in charge before use on works |
| 15 | Labour charges for inserting casing pipes assembly (With slot or without slot) in the drilled hole including welding the joint etc., complete and supplying and packing the annular space with pebbles of size and quality as approved by the Executive Engineer |
| 16 | Supplying and fixing PVC specials as per IS 10124/1982 Part-II, 160mm dia bore cover end cap including material labours etc., all complete |
| 17 | Supply and delivery of three phase submerssible pumpset suitable for 3.00 HP in 150mm dia borewell as per IS 8034/2002 without panel board. |
| 18 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 19 | Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle 20mm with SS 304 threaded metal inserted for tapping outlet suiting for %\\", 3/4\\" &1\\" clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. |
| 20 | Supplying and fixing Three phase panel board including labour charges, materials etc., all complete complying with standard specifications. |
| 21 | Supply, erection, testing and commissioning of Gun metal Non-return valve of size 50mm dia including necessary MS flange of table 'E' gaskets, bolts & nuts etc., installed at pump house delivery line for the purpose of priming to suction line so that to control one way including conveying, fixing and incidental cahrges etc., complete as per standard sepcification and as disrected by the Departmental officers. Make: LEADER/EQUIVALENT. |
| 22 | Charges for developing the Borewell with air compressor of 600 CFM capacity (Minimum 8 Hours) including transportation, labour and fuel charges for compressor as directed by TWAD Officers and conducting yield test by 'V' notch method. |
| 23 | Conveyance of power pumpset such as centrifugal pump set or jet pump set or submersible pumpset and its accessories from divisional stores to site of works |
| 24 | sub total |
| 25 | GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
TodayOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender