Housing Urban and Rular Development Government Departments Closing in 8 days TDR #57955060

Tender For Construction Of Boys Hostel For Department Of Social Justice For 500 Student Capacity With Electrifcation In The C Us Of Laxminarayana Innovation Technological University, Nagpur

Issued by Government Departments · Nagpur, Maharashtra
Tender Value
54.28 Crore
Estimated cost
Bid Submission
26 Oct 2026
8 days left
EMD
27.14 Lakhs
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Tender for Construction Of Boys Hostel For Department Of Social Justice For 500 Student Capacity With Electrifcation In The C Us Of Laxminarayana Innovation Technological University, Nagpur

BOQ

Name of Work:- CONSTRUCTION OF BOYS HOSTEL FOR DEPARTMENT OF SOCIAL JUSTICE FOR 500 STUDENT CAPACITY WITH ELECTRIFCATION IN THE C US OF LAXMINARAYANA INNOVATION TECHNOLOGICAL UNIVERSITY, NAGPUR
Sl. No. Item Description
1Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area .
2Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
3Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means
4Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 3.0 to 4.5m.) By Mechanical Means
5Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means
6Excavation for catch / side water gutter in Soft rock strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed.
7Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.
8Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per One Square Metre of vertical surface area covering 10 years guarantee on bond paper.
9Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per One Square Metre of surface area covering ten years guarantee on bond paper.
10Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper.
11Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.
12Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.
13Filling in plinth and floors with contractors material/brought from outside (Murrum) and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.
14Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
15Providing and laying Cast in situ/Ready Mix cement concrete M-35 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
16Providing and laying Cast in situ/Ready Mix cement concrete M-35 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCAD Aenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
17Total for G.F. =
18Total for 1st.F. =
19Total for 2nd F. =
20Total for 3rd F. =
21Total for 4th F. =
22Total for 5th F. =
23Total for 6th F. =
24Total for 7th F. =
25Total for 8th F. =
26Total for 9th F. =
27Total for 10th F. =
28Total for 11th F. =
29Total for 12th Floor =
30Providing and laying Cast in situ/Ready Mixcement concrete M-35 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
31Total for G.F. =PB+LB+SB+LB
32Total for F.F. =LB+SB+LB
33Total for S.F. =LB+SB+LB
34Total for T.F. =LB+SB+LB
35Total for F.F.
36Total for F.F. =
37Total for S.F. =
38Total for S.F. =
39Total for E.F. =
40Total for N.F. =
41Total for T.F. =
42Total for E.F. =
43Total for T.F. =
44Providing and laying Cast in situ/Ready Mix cement concrete in M-35 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
45TOTAL GF
46TOTAL FF
47TOTAL SF
48TOTAL TF
49Total for F.F. =
50Total for F.F. =
51Total for S.F. =
52Total for S.F. =
53Total for E.F. =
54Total for N.F. =
55Total for T.F. =
56Total for E.F. =
57Providing and laying Cast in situ/Ready Mix cement concrete M-35 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
58Total for G.F. =
59Total for F.F. =
60Total for S.F. =
61Total for T.F. =
62Total for F.F. =
63Total for F.F. =
64Total for S.F. =
65Total for S.F. =
66Total for E.F. =
67Total for N.F. =
68Total for T.F. =
69Total for E.F. =
70Providing and laying Cast in situ/Ready Mix cement concrete in M-35 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
71Ground floor
72First Floor
73Second Floor
74Third floor
75Fourth Floor
76Fifth floor
77Sixth Floor
78Seveth floor
79Eight Floor
80Nineth Floor
81Tenth Floor
82Eleventh Floor
83Twelveth Floor
84Thirteen floor
85Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade)
86Ground floor
87First Floor
88Second Floor
89Third floor
90Fourth Floor
91Fifth floor
92Sixth Floor
93Seveth floor
94Eight Floor
95Nineth Floor
96Tenth Floor
97Eleventh Floor
98Twelveth Floor
99Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
100Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
101Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
102Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
103Providing and laying in situ / ready mix M-25 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required specifications ( VSI sand finely washed etc ) i) Height up to 5 m, normal rate. ii) Height 5 to 7.50 m, add 5 percent extra over basic rate. iii) Height 7.50 to 10 m, 7.50 percent extra. iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.
104Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA
105Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
106Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
107Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
108Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings includingsteel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
109Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
110Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete
111Ground floor
112First Floor
113Second Floor
114Third floor
115Fourth Floor
116Fifth floor
117Sixth Floor
118Seveth floor
119Eight Floor
120Nineth Floor
121Tenth Floor
122Eleventh Floor
123Twelveth Floor
124Thirteen floor
125Providing and fixing in position TMT FE 500, 25mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C and wherever directed including handling, straightening, necessary cutting supported by TMT FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete.
126Providing and fixing in position TMT FE 500, tie bars precoated with anticorrosive epoxy paint of 12 mm dia. 70 cms.long and at 30.00 cm. C/C and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of TMT FE 500, chairs with proper alignment etc. complete.
127Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.
128Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete
129Ground floor
130First Floor
131Second Floor
132Third floor
133Fourth Floor
134Fifth floor
135Sixth Floor
136Seveth floor
137Eight Floor
138Nineth Floor
139Tenth Floor
140Eleventh Floor
141Twelveth Floor
142Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete.
143Ground floor
144First Floor
145Second Floor
146Third floor
147Fourth Floor
148Fifth floor
149Sixth Floor
150Seveth floor
151Eight Floor
152Nineth Floor
153Tenth Floor
154Eleventh Floor
155Providing Water proofing treatment to newly laid fully cured concrete slab of terraces by applying first coat of polymer modified semi-viscous paste prepared by mixing polymer of approved make and Cement in 1 : 2 proportion ( 1 litre polymer : 2 Kg. Cement) to a neatly cleaned and dust free concrete surface and upto 300 mm. over parapet wall prepared by removing loose and deposited material with brush and water, laying glass fibre mesh of 10 x 10 specification of approved make over tacky surface of first coat of polymer followed by second coat in transverse direction, sprinkling coarse sand over it, followed by protective mechanical cover water proof plaster 20 mm thick after sufficient curing apply IPS 40 mm to 75 mm. thick cement concrete of 1:2:3 proportion using coarse aggregate of 10 MSA and water proofing compound of approved make and polypropylene fibres @ 125 gm per bag of cement making groovr 3 to 4 mm wide & 10 mm deep in concrete, in pannels of 3m/4m or as per site condition & filling the joints with poly sulphide sealant after curing including providing holler with drip moulds at the junction and finishing the concrete surface with neat cement slurry, as directed and ponding the surface as directed etc.complete ; covering 10 years guarantee against leakproofness on court Fee stamp paper of Rs 100/-
156Total G.F=
157Total F.F=
158Total S.F=
159Total T.F=
160Total for F.F. =
161Total for F.F. =
162Total for S.F. =
163Total for S.F. =
164Total for E.F. =
165Total for N.F. =
166Total for T.F. =
167Total for E.F. =
168Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete.
169Total for G.F
170Total for F.F
171Total for S.F
172Total for T.F
173Total for F.F. =
174Total for F.F. =
175Total for S.F. =
176Total for S.F. =
177Total for E.F. =
178Total for N.F. =
179Total for T.F. =
180Total for E.F. =
181Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete )
182Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete )
183Total for S.F
184Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete )
185Total for F.F. =
186Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.
187Total for G.F
188Total for F.F
189Total for S.F
190Total for T.F
191Total for F.F. =
192Total for F.F. =
193Total for S.F. =
194Total for S.F. =
195Total for E.F. =
196Total for N.F. =
197Total for T.F. =
198Total for E.F. =
199Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture aerolite make or equivalent of size 595mm x 595mm having 15mm thick densified micro look edge and 100% humidity resistance incombustible as per BS 46part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600x600mm made from hot dipped G.I. steel sections ion silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/black), wherein, main T runner of size 42mmx14mm between main tee 600mm center-tocenter and secondary cross T of size 33x14x0.43mm thick of length 600mm long spaced inter-locked at middle of the first crossed T in each panel to form grid of 1200mmx600mm resting on periphery wall Profile wall section 19mm (7+7) x 19mmx0.40thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. soffit cleats of size 25x35x1.6 mm of required length fixed to the ceiling with 6mm dia and 50mm long dash fastener, 4mm dia G.I. adjustable rods with powder- coated/good quality G.I. level adjustment clips of 35x35x0.8mm spaced @1200, center-to- center along main T all complete at all heights as per the specifications, drawings and as per
200Total for G.F
201Total for F.F
202Total for S.F
203Total for T.F
204Total for F.F. =
205Total for F.F. =
206Total for S.F. =
207Total for S.F. =
208Total for E.F. =
209Total for N.F. =
210Total for T.F. =
211Total for E.F. =
212Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.
213Total for G.F
214Total for F.F
215Total for S.F
216Total for T.F
217Total for F.F. =
218Total for F.F. =
219Total for S.F. =
220Total for S.F. =
221Total for E.F. =
222Total for N.F. =
223Total for T.F. =
224Total for E.F. =
225Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.
226Total for G.F
227Total for F.F
228Total for S.F
229Total for T.F
230Total for F.F. =
231Total for F.F. =
232Total for S.F. =
233Total for S.F. =
234Total for E.F. =
235Total for N.F. =
236Total for T.F. =
237Total for E.F. =
238Providing patti/ band 75mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete.
239Total for G.F
240Total for F.F
241Total for S.F
242Total for T.F
243Total for F.F. =
244Total for F.F. =
245Total for S.F. =
246Total for S.F. =
247Total for E.F. =
248Total for N.F. =
249Total for T.F. =
250Total for E.F. =
251Providing patti/ band 100mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete.
252Total for G.F
253Total for F.F
254Total for S.F
255Total for T.F
256Total for F.F. =
257Total for F.F. =
258Total for S.F. =
259Total for S.F. =
260Total for E.F. =
261Total for N.F. =
262Total for T.F. =
263Total for E.F. =
264Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.
265Total for G.F
266Total for F.F
267Total for S.F
268Total for T.F
269Total for F.F. =
270Total for F.F. =
271Total for S.F. =
272Total for S.F. =
273Total for E.F. =
274Total for N.F. =
275Total for T.F. =
276Total for E.F. =
277Labour charges for providing groove in external plaster having width and spaced as directed by engineer incharge etc. complete.
278Total GF=
279Total FF=
280Total SF=
281Total TF=
282Total for F.F. =
283Total for F.F. =
284Total for S.F. =
285Total for S.F. =
286Total for E.F. =
287Total for N.F. =
288Total for T.F. =
289Total for E.F. =
290Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete
291Total GF=
292Total FF=
293Total SF=
294Total TF=
295Total for F.F. =
296Total for F.F. =
297Total for S.F. =
298Total for S.F. =
299Total for E.F. =
300Total for N.F. =
301Total for T.F. =
302Total for E.F. =
303Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete.
304Total GF=
305Total FF=
306Total SF=
307Total TF=
308Total for F.F. =
309Total for F.F. =
310Total for S.F. =
311Total for S.F. =
312Total for E.F. =
313Total for N.F. =
314Total for T.F. =
315Total for E.F. =
316Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
317Providing and applying impression 24 carrat Luxury paint of approved make & approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC).
318Total GF=
319Total FF=
320Total SF=
321Total TF=
322Total for F.F. =
323Total for F.F. =
324Total for S.F. =
325Total for S.F. =
326Total for E.F. =
327Total for N.F. =
328Total for T.F. =
329Total for Eleven.Floor
330Providing and applying antipeel paint of approved make & approved brand exterior Emulsion paint of approved quality, colour and shade to old and new surface in two coats, including exterior acrylic primer coat, scaffolding, preparing the surface etc. complete (HeatReflective Paint).
331Total GF=
332Total FF=
333Total SF=
334Total TF=
335Total for F.F. =
336Total for F.F. =
337Total for S.F. =
338Total for S.F. =
339Total for E.F. =
340Total for N.F. =
341Total for T.F. =
342Total for E.F. =
343Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively, VOC less than 10 cc/gm. The coating thickness and the methodology of application shall strctly as per manufacturer's specifitions and as approved by engineer in charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc, washing with water all complete.The contractor shall give guarantee for the performance of SRI and also the durabitity of coating, all complete as per direction of Engineer - in- incharge.
344Total GF=
345Total for E.F. =
346Providing and installation of Semi Unitized Structural glass Galzing Work in structure/frame of powder coated frame 67 mm X 50/81.16 mm X 2mm thick Jindal make (code-22736) 1.615 kg/mtr. Weighted and sub frame 51.88 mm X 27.5/14mm X 1.5mm thick Jindal/equivalent Alu. (section code 22740) 0.586 kg/ mtr. Weighted Aluminum curtain wall section. Aluminium framing fitted by powder coated M.S. Angle with Anchor Fastner bolt. 6mm thick toughned Brown Reflective glass of saint Gobain (india) Ltd./equivalent Make with accessories like Permanent Bonding high Strength and Long Term durability Sansui make glass Tape, glasspasted by 995 grade Dow Corning Silicon sealant and glazing glass gap filing bby 789 dow Corning Weather Proof Silicon sealant, Abro Tape, Screw, EPDM gaskate. Sub frame hanging on Jindal/equivalent Aiu. Make clit (section code- 29073). With all accessories complete fitting and with Scaffolding.\\"
347Total GF=
348Total FF=
349Total SF=
350Total TF=
351Total for F.F. =
352Total for F.F. =
353Total for S.F. =
354Total for S.F. =
355Total for E.F. =
356Total for N.F. =
357Total for T.F. =
358Total for E.F. =
359Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges, full/half moulding, polishing wherever necessary, curing, etc. complete.
360Total G.F.
361Total F.F
362Total S.F
363Total T.F
364Total for F.F. =
365Total for F.F. =
366Total for S.F. =
367Total for S.F. =
368Total for E.F. =
369Total for N.F. =
370Total for T.F. =
371Total for E.F. =
372Full Body Vitrified Tile 800x2400 ,8mm thick (Building (Bd-M : Paving,Flooring and Dado) Sr. No.55 Pg. no. 526 approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.
373Total G.F.
374Total F.F
375Total S.F
376Total T.F
377Total for F.F. =
378Total for F.F. =
379Total for S.F. =
380Total for S.F. =
381Total for E.F. =
382Total for N.F. =
383Total for T.F. =
384Total for E.F. =
385Solid Core Flush door Single leafProviding and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 - 1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing with french-polish/ waxing complete. (without door frame).(Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter
386Total G.F=
387Total F.F=
388Total S.F=
389Total T.F=
390Total for F.F. =
391Total for F.F. =
392Total for S.F. =
393Total for S.F. =
394Total for E.F. =
395Total for N.F. =
396Total for T.F. =
397Total for E.F. =
398IS Providing and fixing 30 mm thick Wood Plastic Composite (WPC) single leaf moulded door shutter as per 15931:2012 standard for performance and characteristics lipped with 15 mm (5 mm x 3) thick x 30 mm width on one style and top rail and 10 mm (5 mm x 2) thick x 30 mm width having density ranges from 500-600 Kg/m3 for standard boards upto 650 kg/m3 or higher for solid/heavy-duty doors in required Dimensions 100% water & Moisture proof, Termite & Borer Proof, Fire Retardant eco Wood Plastic Composite friendly (Self Extinguishing) Excellent screw holding capacity having holding strength 2200 N(face) & 1100 N (Edge). Surface Finishes with 1 mm thick High -Presssure Laminate (HPL/Mica) on both faces applied using waterproof adhesive (PVC glue or equivalent), including all fixing accessories ensuring a 2-3 mm top gap,6-8 mm bottom gap and 21.5-4 mm side gaps for proper function as per direction of Engineer in charge and manufacturers specification and drawing etc, complete.
399Total G.F=
400Total F.F=
401Total S.F=
402Total T.F=
403Total for F.F. =
404Total for F.F. =
405Total for S.F. =
406Total for S.F. =
407Total for E.F. =
408Total for N.F. =
409Total for T.F. =
410Total for E.F. =
411Providing and fixing black kadappa stone as shelves 25mm. thick machine polished, extending the polish upto 20 cm width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc. complete.
412Total G.F=
413Total F.F=
414Total S.F=
415Total T.F=
416Total for F.F. =
417Total for F.F. =
418Total for S.F. =
419Total for S.F. =
420Total for E.F. =
421Total for N.F. =
422Total for T.F. =
423Total for E.F. =
424Providing and fixing shutter to wall cupboard made from 19 mm thick Teak particle board with approved coloured laminated face 1.5 mm thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame).
425Total G.F=
426Total F.F=
427Total S.F=
428Total T.F=
429Total for F.F. =
430Total for F.F. =
431Total for S.F. =
432Total for S.F. =
433Total for E.F. =
434Total for N.F. =
435Total for T.F. =
436Total for E.F. =
437Total for T.F. =
438Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete
439Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete
440Total G.F=
441Total F.F=
442Total S.F=
443Total T.F=
444Total for F.F. =
445Total for F.F. =
446Total for S.F. =
447Total for S.F. =
448Total for E.F. =
449Total for N.F. =
450Total for T.F. =
451Total for E.F. =
452Total for T.F. =
453Providing and fixing of factory made uPVC Sliding window & door (White Colour) complete, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (+-0.2 mm), duly reinforced with G.I. section 1.5 mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m24 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm25 Mean Breaking Stress for welded corner(a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2(b) For the compression bending test Shall not be < 30N/mm26 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 %7 Surface Spread of flame BS : 476 - Part 7 Classification 18 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable9 Tensile modulus ASTM D 638 Shall not be < 35 MPa10 Shear Modulus ASTM D 732 Shall not be < 220 MPa11 Tensile Strength EN ISO 527 Shall not be < 30 MPaAll corners of frame and sash will be fusion welded. After placing 5 mm Float Annealed glass in the sash, uPVC glazing bead, interlock, EPDM / TPE gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window / Door will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use. 3 Track with Mesh-2 Glass Sash + 1 Mesh Sash (Each sash shall be half of width of window) (Big Series) Window frame of size 122 x 54 mm & Sash of size 64 x 47 mm.
454Total G.F=
455Total F.F=
456Total S.F=
457Total T.F=
458Total for F.F. =
459Total for F.F. =
460Total for S.F. =
461Total for S.F. =
462Total for E.F. =
463Total for N.F. =
464Total for T.F. =
465Total for E.F. =
466Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/One Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box
467Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.
468Total G.F=
469Total F.F=
470Total S.F=
471Total T.F=
472Total for F.F. =
473Total for F.F. =
474Total for S.F. =
475Total for S.F. =
476Total for E.F. =
477Total for N.F. =
478Total for T.F. =
479Total for E.F. =
480Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.
481Total G.F=
482Total F.F=
483Total S.F=
484Total T.F=
485Total for F.F. =
486Total for F.F. =
487Total for S.F. =
488Total for S.F. =
489Total for E.F. =
490Total for N.F. =
491Total for T.F. =
492Total for E.F. =
493Providing and fixing 40mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete
494Total G.F=
495Total F.F=
496Total S.F=
497Total T.F=
498Total for F.F. =
499Total for F.F. =
500Total for S.F. =
501Total for S.F. =
502Total for E.F. =
503Total for N.F. =
504Total for T.F. =
505Total for E.F. =
506Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use)
507Total G.F=
508Total F.F=
509Total S.F=
510Total T.F=
511Total for F.F. =
512Total for F.F. =
513Total for S.F. =
514Total for S.F. =
515Total for E.F. =
516Total for N.F. =
517Total for T.F. =
518Total for E.F. =
519Total for T.F. =
520Providing and fixing invisible Grill made up of frame Aluminium Track\\" Spacing For invisible grill Bottrom and top placing of SS Wire rope for holding 3mm S.S.316 grade son magnetic nylon control wire fixed vertically at 75mm center to center distance and two rows horizontally, 3mm S.S.stiffner is fixed at every Horizontal and Vertical Junction Point for and 3mm aluminium copper ferrul used or start and end Point of S.S.Wire and Every Eye hook, Plastic Side Insert for tracks, Gl Screw Hex hend with plug for s.s. wire locking purpose as per drawing attached.Including External scaffolding.
521First Floor
522Second Floor
523Third Floor
524Fourth Floor
525Five Floor
526Six Floor
527Seven Floor
528Eight Floor
529Nine Floor
530Ten Floor
531Eleven Floor
532Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.
533Total G.F.
534Total F.F=
535Total S.F=
536Total T.F=
537Total for F.F. =
538Total for F.F. =
539Total for S.F. =
540Total for S.F. =
541Total for E.F. =
542Total for N.F. =
543Total for T.F. =
544Total for E.F. =
545Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.
546Total G.F.
547Total F.F=
548Providing and laying vetrified mirror/glossy finish tiles having size 1200mm x 600 mm size of 8 to 10mm thickness and confirming is 15622-2006 of approved make, shade, pattern double charge for Flooring in required position fixing in 1:4 cement mortar including neat cement float filling joints curing and cleaning etc complete make Johnson/Kajaria/Somany/Rak/Orientbell ог equivalent.
549Total G.F.
550Total F.F.
551Total F.F.
552Total T.F.
553Total for F.F. =
554Total for F.F. =
555Total for S.F. =
556Total for S.F. =
557Total for E.F. =
558Total for N.F. =
559Total for T.F. =
560Total for E.F. =
561Providing and fixing in position Luxurious Premium Satuario Italian Marble slab 18 to 20 mm thick of Approved quality for flooring in required pattern on a bed of 1:6 cement mortar including cementenous filling joints with epoxy and with lubricant polymer plastic compound with white cement slurry including mirror polishing of the marble stone, covering the marble by laying plaster of Paris layer and curing, moulding edges and leaning etc. complete as per approved drawings and as directed by Engineer-in-charge. (Excluding All Taxes)
562Providing and fixing in position Luxurious Premiurn Satuario Italian Marble slab 18 to 20 mm thick of Approved quality for Dado and Skirting in required pattern on a bed of 1:6 cement mortar including cementenous filling joints with epoxy and with lubricant polymer plastic compound with white cement slurry including mirror polishing of the marble stone, covering the marble by laying plaster of Paris layer and curing, moulding edges and cleaning etc. complete as per approved drawings and as directed by Engineer-in-charge. (Excluding All Taxes)
563Providing & Fixing Parking Tile 600x600 ,16mm thick (Building (Bd-M : Paving,Flooring and Dado) sr. no.54 pg. 526 of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.
564Providing and laying vetrified mirror/glossy finish tiles having size 1200mm x 600 mm size of 8 to 10mm thickness and confirming is 15622-2006 of approved make shade, pattern double charge for dado and skirting in required position fixing in 1:4 cement mortar including neat cement float filling joints curing and cleaning etc complete make Johnson/Kajaria/Somany/Rak/Orientbell equivalent. (Excluding All Taxes)
565Total G.F.
566Total F.F=
567Total S.F=
568Total T.F=
569Total for F.F. =
570Total for F.F. =
571Total for S.F. =
572Total for S.F. =
573Total for E.F. =
574Total for N.F. =
575Total for T.F. =
576Total for E.F. =
577Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.
578Total G.F
579Total F.F
580Total S.F
581Total T.F
582Total for F.F. =
583Total for F.F. =
584Total for S.F. =
585Total for S.F. =
586Total for E.F. =
587Total for N.F. =
588Total for T.F. =
589Total for E.F. =
590Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete
591Total G.F=
592Total F.F=
593Total S.F=
594Total T.F=
595Total for F.F. =
596Total for F.F. =
597Total for S.F. =
598Total for S.F. =
599Total for E.F. =
600Total for N.F. =
601Total for T.F. =
602Total for E.F. =
603Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.
604Total G.F=
605Total F.F=
606Total S.F=
607Total T.F=
608Total for F.F. =
609Total for F.F. =
610Total for S.F. =
611Total for S.F. =
612Total for E.F. =
613Total for N.F. =
614Total for T.F. =
615Total for E.F. =
616Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m)
617Total G.F=
618Total F.F=
619Stamp Concrete of 100mm Thickness - Providing and Laying in-situ M30 Grade unreinforced plain cement stamp concrete of 100mm thickness pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate (natural sand / VSI grade finely washed crushed sand) Confirming to IS 383, as per mixed in a batching and mixing plant / non tilting mixer and weigh batcher as per approved mix design, admixtures, transporting to site in nagpur city with lead upto 20KM (on Inner Ring Road from Avasti nagar to wadi), spreading, laying with approved make pover, compacted and finished in a continous operation, finishing to lines and grades Also Providing, Placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has evaporated using dry shake method @5kg per sqm. Including texturing, and covering with plastic sheet (min 200 micron thickness) and also applying two coats of UV-stable,30 % solids clear sealer @ 150 to 250 gms per sqm using surface roller and protecting from falling dust,dirt and curring by curring compound / by providing cement vata in cement Mortor 1 :8 @ 0.6m x 0.6m center to center, admeasuring 80mm at bottom and 40mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-incharge or Landscape architect etc. complete. (prior approval of superinteding Engineer will be necessary )
620Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
621Grab bars-Providing SS grab bars set for accessible toilets comprising of 4 nos. Grab bars as specified below.(1 nos. wing grab bar + 1 nos. L shaped grab bar + 2 nos. straight grab bars = 1 typical set) 27a) Swing grab bar (1 NOS) Providing a S.S. 304 SWING HANDICAP GRAB BAR - 700 mm and of DIA: 32MM and thickness 1.5mm of the roved brand and make. 27b) L Shaped grab bar (1 NOS) Providing S.S. 304 L SHAPED DISABLED GRAB BAR of IZE-600MM (H) X 600MM (D) and 32MM DIA. and thickness mm of the approved brand and make. 27c) Straight grab bar (2 NOS) Providing S.STEEL 304 GRAB RAIL (600 MM),32MM DIA. and thickness 1.5mm of the approved brand and make
622Providing and fixing bituminous pad 25mm thick for expansion joints in retaining wall, compound wall etc. complete.
623Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt.
624Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing forabutment returns, return walls etc. Complete
625Transporation of all types of material upto 2 km
626Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources)
627Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader / Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading - I Material
628Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etc. complete. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.
629Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.
630Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete.
631Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge.
632Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 mOne Metric Tonneo 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer. (A) Contraction and longitudinal joints (15 mm. deep x 8 mm.wide)
633Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 mm thick including 1.5 Refractive index reflectorizing glass beads @ 250gm/sqm .Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd/sqm/ lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification and Performance for IRC 35:2015).
634Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 600mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.
635Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.
636RWH - Recharge PitProviding and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5\\" dia x 25m deep borewell at the floor of recharge pit including installation of combination of solid/perforated PVC casing pipe wrapped around with netlon mesh including 300mm thick sidefilling around outside of RCC rings (annular space) with 40mm size boulders including filling of recharge pit up to 0.5m depth with 25-75mm clean washed gravels from bottom up followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC end-caps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.
637RWH - Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0m dia pre-cast RCC rings, 300mm thick side filling around outside of RCC rings (annular space) with 40mm size boulders including filling of percolation pit up to 0.5m depth (from bottom up) with 25-75mm clean washed gravels followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs etc. including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge
638Providing and applying required coats of a water based Evercrete Deep Penetrating Sealer (DPS) on cement concrete surface like roads, beams, and columns, plastered walls, basements, roofs, potable water tanks etc to react with cement and to penetrate concrete structure thereby making it resistant to chemicals / chlorides water to make it dust proof and to act as a water resistant at the same time which Strengthens the treated surface and reduce the curing period etc complete. - Note -- for item One Number 7 to 4 prior approval of Superintending Engineer will be necessary
639Providing soak pit of size 120cm x 120cm x 120cm including excavation and filling with brick-bats.
640providing, supplying and commissioning of Canteen table 6 Seater PU Coated size shall be 1734 Width mm x 1175 Depth mm x 750 Height mm. Top shall be 25 mm thick base material shall be 25 mm MDF board. On top PU painting of minimum 2H hardness with 75% glass as per color chart Combination color graphics on the centre. Brown Laminate on bottom specially profiled edges for comfort. The Understructure shall be having bend pipe structure of MS powder coated. Pipe dia 38 mm, 2 mm thick and it shall be fitted with top by SS machine screws. Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top. Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking..
641providing, supplying and commissioning of Canteen table4 Seater PU Coated size shall be 1135 Width mm x 1175 Depth mm x 750 Height mm . Top shall be 25 mm thick base material shall be 25 mm MDF board. On top PU painting of minimum 2H hardness with 75% glass as per color chart Combination color graphics on the centre. Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated. Pipe dia 38 mm, 2 mm thick and it shall be fitted with top by SS machine screws. Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top. Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking.
642providing, supplying and commissioning of Café Chair. The Seat and Back should be made up of injection moulded indoor grade PolyPropylene compound SEAT SIZE: 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE: 51.6 cm. (W) x 40.5 cm. (H) The powder coated (DFT 50±10 microns) welded tubular frame should be made from 02.22 ± 0.03 cm x 0.16±0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube.The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame.Overall Dimensions of Chair Seat Height - 45.0 cm. Height - 84.5cm. Width-52.5 cm and Depth-55.8 cm. This product should be certified by Indoor Advantage GOLD, GREENGUARD GOLD, GRIHA & SVAGRIHA & GREEN PRO,
643Ground Floor
644Second Floor (Add 2% Incress)
645Third Floor (Add 3% Incress)
646Forth Floor (Add 4% Incress)
647Fifth Floor (Add 5% Incress)
648Six Floor (Add 6% Incress)
649Seven Floor (Add 7% Incress)
650Eight Floor (Add 8% Incress)
651Nine Floor (Add 9% Incress)
652Ten Floor (Add 10% Incress)
653Eleven Floor (Add 11% Incress)
654Providing, supplying and commissioning of three seater sofa. SEAT FOAM: The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top laver of supersoft PU foam in Density 32 +2 kg/cu, upholstered with fabric or leatherette.BACK FOAM: The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32+2 kg/cu. mtr, upholstered with fabricor leatherette.UNDERSTRUCTRE: Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose.LEG ASSEMBLY: It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.Width (W): 206.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SFI): 45,0 CM.
655Total for G.F. =
656Total for F.F. =
657Total for S.F. =
658Total for T.F. =
659Total for F.F. =
660Total for F.F. =
661Total for S.F. =
662Total for S.F. =
663Total for E.F. =
664Total for N.F. =
665Total for T.F. =
666Total for E.F. =
667Single bed - ESCA STD 2ARH SLT SingleBedPlywood not required
668First Floor (Add 1% Incress)
669Second Floor (Add 2% Incress)
670Third Floor (Add 3% Incress)
671Forth Floor (Add 4% Incress)
672Fifth Floor (Add 5% Incress)
673Six Floor (Add 6% Incress)
674Seven Floor (Add 7% Incress)
675Eight Floor (Add 8% Incress)
676Nine Floor (Add 9% Incress)
677Ten Floor (Add 10% Incress)
678Eleven Floor (Add 11% Incress)
679providing, supplying and commissioning of Mattress Dual Side Usage with combination of Hard and Normal PU Foam on either sides70 mm (28D) hard foam layer on one side to provide adequatesupport your body50 mm (28D) PU Foam layer on other side to provide cushionPU Foam Layer in quilting gives an additional cushioning and soft feeldue to the flexibility of PU FoamReasonable price point in 5 \\" to target new accounts for market penetrationAn attractive two year-long warrantyPolyester Fabric in Maroon colour which is in line with the current market trends and demands, at the same time extremely strong and durable
680First Floor (Add 1% Incress)
681Second Floor (Add 2% Incress)
682Third Floor (Add 3% Incress)
683Forth Floor (Add 4% Incress)
684Fifth Floor (Add 5% Incress)
685Six Floor (Add 6% Incress)
686Seven Floor (Add 7% Incress)
687Eight Floor (Add 8% Incress)
688Nine Floor (Add 9% Incress)
689Ten Floor (Add 10% Incress)
690Eleven Floor (Add 11% Incress)
691Providing and placing of Nexa pillow of size Certified Microfiber Pillow, 1727 Inch, White, Fill Material Microfiber Pillow Type Bed Pillow Colour White Size 17\\"x27\\" Shape Rectangular Special Feature Washable Cover Material Microfiber Softness scale: 4/10 Outer Material: Microfiber, Inner Filling: 15D Mech Siliconized Fiber or equivalent.
692First Floor (Add 1% Incress)
693Second Floor (Add 2% Incress)
694Third Floor (Add 3% Incress)
695Forth Floor (Add 4% Incress)
696Fifth Floor (Add 5% Incress)
697Six Floor (Add 6% Incress)
698Seven Floor (Add 7% Incress)
699Eight Floor (Add 8% Incress)
700Nine Floor (Add 9% Incress)
701Ten Floor (Add 10% Incress)
702Eleven Floor (Add 11% Incress)
703Supplying and placing in position Main table of the following specifications. Its size shall be 1800 Width mm x 900 Depth mm x 740 Height mm. Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and I mm thick backing laminate (bdl) Flat edge Duly sealed with 2 mm thick PVC beading. The modesty shall be 18 mm thick plain particle board () PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Scaled with 2 mm thick PVC beading. Supplying and placing in position ERU of the following specifications. Its size shall beThe 1550 Width x 450 Depth x 705 Height. The top of ERU shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and I mm thick Backing Laminate (BDL). Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading. Supplying and placing in position Free Standing Pedestal of the following specifications with Overall Dimensions shall be 390mm(W)x440mm(D)x646mm(H). construction & Material used shall be welded assembled, 0.8 mm thick CRCA for body shell, drawer front & tray, front side stiffener, rear aide stiffener and 1.2 mm thick CRCA Top stiffener & Bottom stoffener. The drawer fronts shall be metal front straight edge. Locking shall be 10 lever cam lock & Central RH locking with actuator & lock channel mechanism for box-box-file Pedestal. The top panel shall be metal straight edge top. Castor should be swiveling non lockable castors mounted below the body shell for free standing full height mobile pedestal and M8 Leveling stud for free standing pedestal. The anti-tipping mechanism shall have fifth roller arrangement mounted below file drawer to avoid toppling of unit when file drawer is pulled out. Partition in drawer shall be 1 no. Partition in box drawers with lock mounted. Plastic pencil tray shall be optional accessory. Finish shall be epoxy polyester powder coated to the thickness of 50 microns. Application shall be suitable for pushing below work surface which has got a clear height of 725 mm from below. For drawer pulling side wise tapered recess provided in shell behind drawer fronts.This product should be certified by GREENGUARD.
704Total for G.F. =
705Providing, supplying and commissioning of STEP-IN STEEL.Overall Size: Width: 50cm Depth: 14cm Height: 110.8cmBody: Aestheticallyappealing plain, made from combination of CRCA 0.6 mm & 0.8 mm Thickness. construction: Assembled. Finish: Epoxy Powder coated. Hardware: High quality standard hardware like screws, rivets, bushes, bangers, washers, etc. Door & Locking: Combination door opening. Common Cam lock fitted to the topmost compartment door Carton One packet.
706Total for S.F. =
707Total for T.F. =
708Total for F.F. =
709Total for F.F. =
710Total for S.F. =
711Total for S.F. =
712Total for E.F. =
713Total for N.F. =
714Total for T.F. =
715Total for E.F. =
716Thrill mid back chair
717Total for G.F. =
718Total for F.F. =
719Total for S.F. =
720Total for T.F. =
721Total for F.F. =
722Total for F.F. =
723Total for S.F. =
724Total for S.F. =
725Total for E.F. =
726Total for N.F. =
727Total for T.F. =
728Total for E.F. =
729Providing and placing a foldable cloth drying stand Alloy Steel with done in 9 tank process Product Dimensions 122D x 7W x 64.5H CentimetersColour as approved by the engineer in charge. Built from high-grade, powder-coated steel and precision engineered HDPE components to ensure maximum corrosion resistance. Designed for use in all climates and weather conditions. The ergonomic design ensures maximum drying aread while occupying minimum space. The entire body can be folded into a compact version of itself for easy storage when not in use. Specially designed arm locks are designed to take heavy loads, and ensure the dual arms smoothly fold outwards and lock effectively in place. The special multi-level design allows larger clothes to be placed on the upper tier while the lower tier can be simultaneously used for socks and smaller clothing items.
730Total for G.F. =
731Total for F.F. =
732Total for S.F. =
733Total for T.F. =
734Total for F.F. =
735Total for F.F. =
736Total for S.F. =
737Total for S.F. =
738Total for E.F. =
739Total for N.F. =
740Total for T.F. =
741Total for E.F. =
742providing, supplying and commissioning of computer Table.Table Top:40. Kg. Shelf:15 Kg.Drawer:- Kg.Overall Size (Width X Depth X Height): (+/-1) mmLength: 900 mm Width: 590 mm Height: 745 mmNumber of Cartons: 01 Carton Specs:5 ply, 120 gsm, 16 BS.Carton Size (each Carton): (in mm)L x W x H (Carton 1 of 1) 950 X 635 X 130 mm/Net Wt: 21.3 kg/Gross Wt: 23.3Kg Raw Material (specs of laminations & thickness): PLB top :PLB: 25 mm for table top with 2.0 mm thick PVC lipping. Metal Parts: MSERW Tube, MS CRCA sheets & MS Bright Bar.Powder coated: 35 microns Minimum. Multi-colored ModestyHardware: (Details) .Nut & Bolts, 5 Glide screws, Self Tapping Screws & ArticulatedPlastic KBPT Construction: Knock down fitting.
743Total for F.F. =
744Total for S.F. =
745Total for T.F. =
746Total for F.F. =
747Total for F.F. =
748Total for S.F. =
749Total for S.F. =
750Total for E.F. =
751Total for N.F. =
752Total for T.F. =
753Total for E.F. =
754providing, supplying and commissioning of storage ut.Overall Size: (W x D x H): For 450W Unit: 44.8cm x 2cm x 197.8cmAesthetically appealing doors made from pre-coated steel which is galvanized steel 0.8mm thick and coated with PVC film 0.15mm thick in different finishes.stiffeners made from combination of G1 0.6mm thickness.back panel made from combination of MS 0.6mm thickness.finish: All MS sheet metal components are powder coated with epoxy polyster powder to the thickness of 50-60 microns.hardware: High quality standard hardware like screw, washer, lock, door hinges, bumpers, aluminium handle etc.
755Total for F.F. =
756providing, supplying and commissioning of waiting chair. SEAT SHELL: The seat shellshould be a welded assembly of seat, back and side frame. The seat and back should bemade of 0.12±0.013cm thk CR steel sheet with oblong perforations. They should bewelded to sideframe of size 3.2±0.05cm x 0.5 ± 0.05 cm thk HR steel. The weldedassembly should be powder coated (DFT 40-60 microns). The seat has a front water fall edge to provide popliteal clearance for comfortable seating. It also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back. Clean and flat surfaces of seat and back aids in easy maintenance. * SEAT SIZE: 47.8 cm (W) x 44.6 cm (D) * BACK SIZE: 41.6 cm (W) x 23.0 cm (H) Understructure assembly consshould be ts of connecting beam and leg assembly made of M.S. E.R.W. oblong tube of size 7.5±0.03cm x 2.5±0.03cm x 0.2±0.016cm thk. The welded structure assembly should be powder coated (DFT 40-60 microns). The leg assembly should be fitted with shoes and levellers in Nylon. The leg structure should be designed with minimal should be a of contact close to ground providing easy access for cleaning purposes. The shoes fitted to leg assembly help in aligning the structure for back to back arrangements. Levellers take cshould be of uneven flooring. Connecting beam should be fitted with snap locking end cap.It also aids in side-by-side understructure alignmentArmrest assembly consshould be ts of armrest frame and armrest pad. The armrest frame should be made up of size 3.175±0.05cm x 0.47±0.027cm thk HR steel and it should be powder coated (DFT 40-60 microns). Armrest pad should be injection molded in Nylon and should be fitted onto the armrest frame.Overall Dimensions of Chair Seat Height - 44.1 cm. Height - 78.5 cm.Width & Depth of Chair as - Width-169.5cm and Depth-63.8 cm.
757ALL FLOOR
758Kitchen TrolleyProviding and Fixing stainless steel kitchen trolley of overall 26 \\" height and 22\\" depth,supported on aluminium pipes ,trolley basket made out of 5 mm stainless steel rod fitted on telescopic channel of size 1.5 \\" x 20 \\" x 22 \\" on both sides of trolley of 12 \\" or above size, panel having 40Kilogramload bearing capacity of trolley made out of 20 mm PUC coated plywood and colour combination as directed by E-I-C.Inner side of panel covered by white mica ,100 mm s.s. decorative handle.(The width and height of individual compartments shall be kept as directed by Engineer-in-charge)
759Total for G.F. =
760Total for F.F. =
761Providing, fixing and commissioning of Godrej make MERAKI corner table, Overall Size: Width: 60cm Depth: 60cm Height: 49.8cm Materials: All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness. Drawer bottom is made of 9 mm thick prelaminated particle board Drawer front is made of 18 mm thick PU painted MDF. Legs Rubber wood Hardware: Hettich. Construction: Knock down.Finish: All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band. PU lamination is high gloss in Ecru shade. Packets: 1 nos. Materials: All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness.Hardware: Hettich. Construction: Knock down.Finish: All 18 mm prelaminated particle board panels are Noce Versaillies with walnut edge band. PU lamination is high gloss in Ecru shade .Packets: 1 nos
762Ground Floor
763First Floor
764Providing, fixing and commissioning of godrej make Kareena chair, Providing, supplying and placing of apo kareena Visitor Chair. SEAT/BACK ASSEMBLY: The seat should be made up of 1.2 ±0.1cm. thick hot pressed plywood and upholstered with fabric or synthetic leather and moulded Polyurethane Foam. The back should be made up 1.2 ±0.1cm. thick hot pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The back ply and foam should be designed with contoured lumber support for comfortable seating posture.MID BACK SIZE: 48.0cm. (W) X 64.5cm.(H)SEAT SIZE: 51.0cm. (W) X 48.0cm.(D)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam for seat and back should be moulded with density = 45±2 kg/m³ and Hardness load 16 ± 2 kgf for 25% compression.ARMRESTS: The armrest top should be made of moulded polyurethane (P.U) and mounted on to a fixed type tubular armrest support which should be chrome plated Finish.FIXED BACKREST: The backrest consshould be ts of a fixed type mechanism i.e. no back up/down adjustment.FIXED SPINE: The seat and backare arrested together withfixed type spine i.e no backup/down adjustment ;made of 0.8 ± 0.05cm thk HR steel ans id back power-coated (OFT 40-60 micros).TUBULAR VISITOR FRAME : The tubular frame is cantilever structure & made of Dia 2.54 ± 0.03cm. X 0.2±0.016cm.thk. M.S. E.R.W. tube with a M.S. Spine mounting bracket welded to it. Back spine is fitted to the assembly. The frame finish is Nickel Chrome plated (15-20 microns).Overall Dimensions of ChairSeat Height-47.7cm.Height - 93.0cm.Width & Depth of Chair as measured from pedestal - Width-66.5 cm and Depth-61.6 cm.Certification- NA
765First Floor
766Cutting down trees including trunks and branches with girths above 30cm to 60cm and stacking the materials neatly with all lifts and lead of 1000m as directed and earth filling in the depression / pit if any.
767Supplying on site fresh Garden soil (i. e. 3 part soil) (free from stones rubbish like dried grass roots, other such materials) for excavated pit size area of 0.60 x 0.60 x 0.60m (consolidated thickness).
768Supplying on site well I decomposed Farm Yard Manure FYM (i. e. 1 part FYM) for excavated pit size area of 0.60 x 0.60 x 0.60m ( consolidated thickness).
769Excavation pit size 0.60 x 0.60 x 0.60m for planting small & medium ornamental plants/large flowering/ shady trees (plant height 1 to 2 mtr.)/ palm varieties upto height 1 to 2 mtrs. in earth, soil of all types, soft murum, including removing the excavated & unwanted material up to a required distance of 50 mtrs.
770Filling fresh garden soil / silt & manure in excavated pit size area of 0.60 x 0.60 x 0.60m (1/10 of unskilled labour)
771Mixing garden soil/silt & manure thoroughly well, watering previous night. Planting reqired plant species as directed etc. complete for required pit size 0.60 x 0.60 x 0.60m.
772Maintainance of Newly Planted tree varities having height 1mtr. - 2mtr. For First 30 days Only
773PLANTATION
774Arjun Tree (Terminalia arjuna) / अर्जुन.
775Karanji Tree (Pongamia pinnata) / करंज.
776Peepal Tree (Ficus religiosa) / पिंपळ.
777Banyan Tree (Ficus benghalensis) / वड.
778Neem Tree (Azadirachta indica) / कडुनिंब.
779Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete.
780Ground Floor
781FIRST Floor
782Removing cement tiles, or marble or polished shahabad floor or dado without bedconcrete including stacking the materials as directed with all leads, lifts etc. complete
783Ground Floor
784FIRST Floor
785Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.
786Ground Floor
787FIRST Floor
788Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.
789Ground Floor
790FIRST Floor
791Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete.
792Ground Floor
793FIRST Floor
794Removing urinal pans or wash hand basins with frame including disconnecting the sanitary and water supply connections, removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials outside etc complete
795Ground Floor
796FIRST Floor
797Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete.
798Ground Floor
799FIRST Floor
800Removing single country tiled roof with battens and stacking the materials as directed with all leads and lifts etc. complete.
801Transportation of material obtained from debris of various sorts including necessary excavation/ loosing including loading, unloading and conveying and disposing as directed. (a) For 10 Km.
8024 HP AC Motor Treadmill
803Total for F.F. =
804Upight Bike
805Total for F.F. =
806Spin Bike
807Total for F.F. =
808Elliptical Cross trainer
809Total for F.F. =
810Adjustable ABS Bench
811Total for F.F. =
812Multy Purpose Bench
813Total for F.F. =
814Hyper Extension
815Total for F.F. =
816Multi Adjustable Bench
817Total for F.F. =
818Plate rack
819Total for F.F. =
820Weight Plates 170.00 Kgs
821Total for F.F. =
822Dumbheel Rack
823Total for F.F. =
824Dumbheels 170.00 Kgs
825Total for F.F. =
8264 station Multi Gym
827Total for F.F. =
828Flat Bench
829Total for F.F. =
830Flat Bench press
831Total for F.F. =
832Incline Bench Press
833Total for F.F. =
834Decline Bench Press
835Total for F.F. =
836Lat Pulldown
837Total for F.F. =
838Biccp Curl Machine
839Total for F.F. =
840Leg Extension
841Total for F.F. =
842Chest Press
843Total for F.F. =
844Seated Leg Curl
845Total for F.F. =
846Pee Fly Rear Delt
847Total for F.F. =
848Assisted dip Chin
849Total for F.F. =
850Leg Press Cum Hack Squat
851Total for F.F. =
852T Bar
853Total for F.F. =
854Cable Crossover
855Total for F.F. =
856Providing and fixing white european type wall-hung pan, of size 350mm x 355mm x 570 mm concealed flush tank with floor-mounting frame installing kit and drain pipe connection set for wall hung WC, with approved make square control plates including soil pipe, vent pipe upto the outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings,cutting & making good walls, floors etc. complete.
857Ground Floor
858First Floor
859Second Floor
860Third Floor
861Fourth Floor
862Fifth Floor
863Sixth Floor
864Seventh Floor
865Eight Floor
866Nineth Floor
867Tenth Floor
868Eleventh Floor
869Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.
870Ground Floor
871First Floor
872Second Floor
873Third Floor
874Fourth Floor
875Fifth Floor
876Sixth Floor
877Seventh Floor
878Eight Floor
879Nineth Floor
880Tenth Floor
881Eleventh Floor
882Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195mm size with pillar cock, C.P.Angular stop cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the outside face of the wall, having Telephonic Black / Colour Granite of 180 mm thick fixed on Black Kadappa Framework, etc. Complete as directed by Engineer in charge.
883Ground Floor
884First Floor
885Second Floor
886Third Floor
887Fourth Floor
888Fifth Floor
889Sixth Floor
890Seventh Floor
891Eight Floor
892Nineth Floor
893Tenth Floor
894Eleventh Floor
895Providing and fixing divertor with overhead shower,shower arm,spout,hand shower with wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware /Perryware or equivalent make including all necessary pipes,fittings etc.complete as directed by Engineer In Charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)
896First Floor
897Second Floor
898Third Floor
899Fourth Floor
900Fifth Floor
901Sixth Floor
902Seventh Floor
903Eight Floor
904Nineth Floor
905Tenth Floor
906Eleventh Floor
907Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.
908Ground Floor
909First Floor
910Second Floor
911Third Floor
912Fourth Floor
913Fifth Floor
914Sixth Floor
915Seventh Floor
916Eight Floor
917Nineth Floor
918Tenth Floor
919Eleventh Floor
920Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
921Ground Floor
922First Floor
923Second Floor
924Third Floor
925Fourth Floor
926Fifth Floor
927Sixth Floor
928Seventh Floor
929Eight Floor
930Nineth Floor
931Tenth Floor
932Eleventh Floor
933Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
934Ground Floor
935First Floor
936Second Floor
937Third Floor
938Fourth Floor
939Fifth Floor
940Sixth Floor
941Seventh Floor
942Eight Floor
943Nineth Floor
944Tenth Floor
945Eleventh Floor
946Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
947Ground Floor
948First Floor
949Second Floor
950Third Floor
951Fourth Floor
952Fifth Floor
953Sixth Floor
954Seventh Floor
955Eight Floor
956Nineth Floor
957Tenth Floor
958Eleventh Floor
959Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
960Ground Floor
961First Floor
962Second Floor
963Third Floor
964Fourth Floor
965Fifth Floor
966Sixth Floor
967Seventh Floor
968Eight Floor
969Nineth Floor
970Tenth Floor
971Eleventh Floor
972Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
973Ground Floor
974First Floor
975Second Floor
976Third Floor
977Fourth Floor
978Fifth Floor
979Sixth Floor
980Seventh Floor
981Eight Floor
982Nineth Floor
983Tenth Floor
984Eleventh Floor
985Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.
986Ground Floor
987First Floor
988Second Floor
989Third Floor
990Fourth Floor
991Fifth Floor
992Sixth Floor
993Seventh Floor
994Eight Floor
995Nineth Floor
996Tenth Floor
997Eleventh Floor
998Providing and fixing on walls/ ceiling/ floors, 80 mm dia.heavy grade having embossed as ISI Mark galvanised iron pipes weight of 10.15 Kilogram/meter with necessary fittings. and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
999Ground Floor
1000First Floor
1001Second Floor
1002Third Floor
1003Fourth Floor
1004Fifth Floor
1005Sixth Floor
1006Seventh Floor
1007Eight Floor
1008Nineth Floor
1009Tenth Floor
1010Eleventh Floor
1011Providing and fixing on walls/ ceiling/ floors, 100 mm dia.heavy grade having embossed as ISI Mark galvanised iron pipes weight of 14.74 Kilogram/meter with necessary fittings. and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
1012Ground Floor
1013First Floor
1014Second Floor
1015Third Floor
1016Fourth Floor
1017Fifth Floor
1018Sixth Floor
1019Seventh Floor
1020Eight Floor
1021Nineth Floor
1022Tenth Floor
1023Eleventh Floor
1024Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete
1025Ground Floor
1026First Floor
1027Second Floor
1028Third Floor
1029Fourth Floor
1030Fifth Floor
1031Sixth Floor
1032Seventh Floor
1033Eight Floor
1034Nineth Floor
1035Tenth Floor
1036Eleventh Floor
1037Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.
1038Ground Floor
1039First Floor
1040Second Floor
1041Third Floor
1042Fourth Floor
1043Fifth Floor
1044Sixth Floor
1045Seventh Floor
1046Eight Floor
1047Nineth Floor
1048Tenth Floor
1049Eleventh Floor
1050Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete
1051Ground Floor
1052First Floor
1053Second Floor
1054Third Floor
1055Fourth Floor
1056Fifth Floor
1057Sixth Floor
1058Seventh Floor
1059Eight Floor
1060Nineth Floor
1061Tenth Floor
1062Eleventh Floor
1063Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.
1064Ground Floor
1065First Floor
1066Second Floor
1067Third Floor
1068Fourth Floor
1069Fifth Floor
1070Sixth Floor
1071Seventh Floor
1072Eight Floor
1073Nineth Floor
1074Tenth Floor
1075Eleventh Floor
1076Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.
1077Ground Floor
1078First Floor
1079Second Floor
1080Third Floor
1081Fourth Floor
1082Fifth Floor
1083Sixth Floor
1084Seventh Floor
1085Eight Floor
1086Nineth Floor
1087Tenth Floor
1088Eleventh Floor
1089Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.
1090Ground Floor
1091Eleventh Floor
1092Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)
1093First Floor
1094Second Floor
1095Third Floor
1096Fourth Floor
1097Fifth Floor
1098Sixth Floor
1099Seventh Floor
1100Eight Floor
1101Nineth Floor
1102Tenth Floor
1103Eleventh Floor
1104Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)
1105Ground Floor
1106First Floor
1107Second Floor
1108Third Floor
1109Fourth Floor
1110Fifth Floor
1111Sixth Floor
1112Seventh Floor
1113Eight Floor
1114Nineth Floor
1115Tenth Floor
1116Eleventh Floor
1117Providing, laying and fixing P.V.C. pipe of 50mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
1118Ground Floor
1119First Floor
1120Second Floor
1121Third Floor
1122Fourth Floor
1123Fifth Floor
1124Sixth Floor
1125Seventh Floor
1126Eight Floor
1127Nineth Floor
1128Tenth Floor
1129Eleventh Floor
1130Providing, laying and fixing P.V.C. pipe of 40mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
1131Ground Floor
1132First Floor
1133Second Floor
1134Third Floor
1135Fourth Floor
1136Fifth Floor
1137Sixth Floor
1138Seventh Floor
1139Eight Floor
1140Nineth Floor
1141Tenth Floor
1142Eleventh Floor
1143Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.
1144Ground Floor
1145First Floor
1146Second Floor
1147Third Floor
1148Fourth Floor
1149Fifth Floor
1150Sixth Floor
1151Seventh Floor
1152Eight Floor
1153Nineth Floor
1154Tenth Floor
1155Eleventh Floor
1156Providing, laying and fixing P.V.C. pipe of 32mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
1157Ground Floor
1158First Floor
1159Second Floor
1160Third Floor
1161Fourth Floor
1162Fifth Floor
1163Sixth Floor
1164Seventh Floor
1165Eight Floor
1166Nineth Floor
1167Tenth Floor
1168Eleventh Floor
1169Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete.
1170Ground Floor
1171Eleventh Floor
1172Providing and fixing 100mm diameter water meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangements and lock. [Without chamber].
1173Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.
1174Providing , laying and fixing ,jointing Eco- drain 160 mm SN 4 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees , coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete.
1175Providing , Laying and fixing, jointing Eco Drain 250 mm SN-04 Nu-Drain Upvc pipe or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 & 16098 with fittings such a bends, tees, coupler, etc. jointing with rubber lubricant, including necessary excavation, trench refilling with selective excavated material etc. complete.
1176Providing , Laying and fixing, jointing Eco Drain 315 mm SN-04 Nu-Drain Upvc pipe or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 & 16098 with fittings such a bends, tees, coupler, etc. jointing with rubber lubricant, including necessary excavation, trench refilling with selective excavated material etc. complete.
1177Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75Kilogramwith lid and frame fixed in cement concrete.
1178Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75Kilogramwith lid and frame fixed in cement concrete.
1179Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete.
1180Ground Floor
1181First Floor
1182Second Floor
1183Third Floor
1184Fourth Floor
1185Fifth Floor
1186Sixth Floor
1187Seventh Floor
1188Eight Floor
1189Nineth Floor
1190Tenth Floor
1191Eleventh Floor
1192Providing and laying in trenches 32 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 3.89 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
1193Providing and laying in trenches 40 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 4.49 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
1194Providing and laying in trenches 80 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 10.15 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
1195Providing and laying in trenches 100 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 14.74 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
1196Providing and fixing screw down for 80 mm. dia. wheeled stop tap of brass including necessary sockets/union nut complete.
1197Ground Floor
1198Eleventh Floor
1199Providing and fixing white glazed urinal with Pressmatic auto closing valve having flow rate up to 4.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalent make with P.V.C. waste pipe with fitting arrangement etc.complete as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)
1200Ground Floor
1201First Floor
1202Second Floor
1203Third Floor
1204Fourth Floor
1205Fifth Floor
1206Sixth Floor
1207Seventh Floor
1208Eight Floor
1209Nineth Floor
1210Tenth Floor
1211Eleventh Floor
1212Transportation charges of drilling machine, pipes and all accesorries of tube well etc.complete.
1213Drilling of tube well 150 mm dia. including drilling in all strata, removing drilled stuff out side the tube well complete.
1214Providing with thread Plain Iron casing pipes of 150 mm dia and 4.80mm thick Pipes of M.S.E.R.W. medium class (I.S.1239) for 150 mm dia. Tube-well, including lowering into tube well without any damage & welding etc. complete.
1215Providing Perforated Iron casing pipes of 150 mm dia and of 4.80mm thickness of M.S.E.R.W. medium class (I.S.1239), including lowering into tube well without any damage etc. complete.
1216Providing and fixing steel cap (I.S. 1239) for threaded Iron casing pipes including all acessesories complete.
1217Providing gravel packing around the tube well & as directed by the engineer-Incharge etc. complete.
1218Improving (Development) process of tube well etc. complete.
1219Providing and fixing bell plug including all acessesories etc. complete.
1220Providing Wooden blocks of Mango trees of size 1.00m in length x 0.15m. width x 0.20m. thick. etc. complete.
1221Providing and fixing steel clamps 1.00m in length x 0.10m. width x 0.01m. thick. etc. Complete.
1222Providing Flushing (Air Lift method) after completion of Tubwell and capacity test by 90 degree \\"V\\" notch for half an hour as per G.S.D.A. Norms etc. Complete.
1223Providing and laying in trenches 25 mm dia. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
1224Providing and laying in trenches 32 mm dia. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
1225Providing and laying in trenches 50 mm dia. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
1226Providing and laying in trenches 15 mm dia. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
1227Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete
1228Royalty Charges for H.B. Metal
1229Royalty Charges for Murum
1230fine Aggaragate - Fineness Modulus(Siev Analysis), Silt & Clay Content
1231fine Aggaragate - Silt factor
1232fine Aggaragate - Chloride & Sulphate Content.
1233Metal- Sieve Analysis.
1234Metal- Water Absorption, Specific Gravity,Impact Value, Crushing Value.
1235Metal- Soundness.
1236Metal- Abrasion Value
1237Metal- Flakiness Index & Elongation Index.
1238Standard Consistancy,Fineness,Specific Gravity,Setting Time (Initial & Final),Compressive Strength,Soundness.
1239Bricks -Water Absorption (Set of 5 Bricks),Compressive Strength (Set of 5 Bricks) ,Efflorescence (Set of 5 Bricks).
1240Flooring tiles - of Natural Stone (Kota,Marble, Granite,Tandur.etc.) Water absorption, Specific gravity
1241Ceramic Tiles Vitriifed tiles -Water absorption, Specific gravity
1242Compressive Strength of C.C. Cube (Set of 3 cubes)
1243Concrete Mix Design bt Accealareted Method
1244Murum Liquid limit and Plastic Limit
1245Compressive Strength , Water Absorption,(Set of 8 Blocks)
1246Up to 16 mm dia. (Set of 3 bars) (Tensile strength,% Elongation,Yield stress,Weight per meter,Bend/ Rebend Test, Proof Stress.)
1247Above 16 mm dia. (Set of 3 bars) (Tensile strength,% Elongation,Yield stress,Weight per meter,Bend/ Rebend Test, Proof Stress.)
1248Water Test for PH Value, Sulphate & Chloride Content.
1249flush door - Knife Test, Adhesion Test, End Immersion Test.
1250Ply wood -Determination of Resistance to dry heat,Determination of Moisture Content,Determination of Density,Thickness of Plywood.
1251Aluminimum Section -Thickness, Mass Per Running meter,
1252Paint - Flowability.(Percentage residue).
1253Paint - Drying Time.
1254Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately Specification No:- WG-MA/CON.
1255Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring Specification No:- WG-MA/CON.
1256Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with necessary accessories in wall/floor with chiselling appropriately Specification No:- WG-MA/CON.
1257Supplying and laying HMS PVC conduit FRLS grade 32mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
1258Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places Specification No:- WG-MA/BW.
1259Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places Specification No:- WG-MA/BW.
1260Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
1261Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
1262Supplying and erecting mains with 2x4.0 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places Specification No:- WG-MA/BW.
1263Supplying and erecting mains with 1x4.0 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places Specification No:- WG-MA/BW.
1264Supplying and erecting mains with 2x6.0 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places Specification No:- WG-MA/BW.
1265Supplying and erecting mains with 1x6.0 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places Specification No:- WG-MA/BW.
1266Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.
1267Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.
1268Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
1269Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
1270Supplying and erecting modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.
1271Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.
1272Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
1273Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
1274Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
1275Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modulartype switch, earthing and required accessories Specification No:- WG-PW/CW.
1276Point wiring for ceiling fan (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/HW
1277Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories Specification No:- WG-PW/CW.
1278Wiring for plug on board with switch socket surface/concealed type, copper wiring and earthing and with modular accessories Specification No:- WG PW/CW
1279Supplying & erecting co-axial copper cable low voltage grade tri-shielded RG-6 Specification No:-WG-TW.
1280Supplying and erecting LED square / circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.
1281Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVCBlock / wooden board with 3 years warranty.
1282Supplying and erecting CRCA powder coated corridor/passage light LED fitting (4 feet) Max. 17W with high transitivity diffuser with system lumens output of Min. 2000 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty
1283Supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size.
1284Supplying & erecting 0.5W, 230V integral type LED Lamp suitable for B-22/E-27 base.
1285Supplying & erecting 10W-12W, 230V integral type LED Lamp suitable for B-22 / E-27 base
1286Supplying and erecting regular/ standard model ceiling fan of 900 /1050 mm.sweep complete erected in position
1287Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.
1288Supplying and erecting exhaust fan heavy duty 230 V, A.C. 50 cycles 375/380 mm. 900 RPM complete erected in position Specification no:- FG-FN/EXF
1289Supplying and erecting energy saving ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position Specification no:- FG-FN/CF
1290Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.
1291Supplying and erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire
1292Supplying double door refrigerator domestic type of 415 litres storage capacity, minimum 5 Star inverter type, stabilizer free operation suitable for operation on 100V/300 V, 50 Hz with automatic temperature control, shall be marked on unit for sealed unit in refrigeration system and marking sr. no. and date of erection complete
1293Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz nominal cooling capacity of 80 litres per hour and storage capacity 120 litres with partially stainless steel body Specification no:- AP-WCR/ WC
1294Supplying and erecting ultra violet storage type water purifier (RO+UV+UF)with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)
1295Supplying,erecting & marking SPMCB 6A to 32A, C-series with rated short-circuit breaking capacity (Icn) 10kA in provided distribution board Specification No:- SW-SWR/MCBDB
1296Supplying,erecting & marking SPMCB 6A to 32A, B-series with rated short-circuit breaking capacity (Icn) 10kA in provided distribution board Specification No:- SW-SWR/MCBDB
1297Supplying,erecting & marking DPMCB 6A to 32A, C-series with rated short-circuit breaking capacity(Icn) 10kA inprovided distribution board Specification No:- SW-SWR/MCBDB
1298Supplying,erecting & marking DPMCB 6A to 32A, B-series with rated short-circuit breaking capacity(Icn) 10kA inprovided distribution board Specification No:- SW-SWR/MCBDB
1299Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) Specification No:- SW-SWR/MCBDB
1300Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways/phase (24poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) Specification No:- SW-SWR/MCBDB
1301Supplying and erecting single pole and neutral distribution board (SPNDB), with 2ways for incoming and 2 ways (2 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame Specification No:- SW-SWR/MCBDB
1302Supplying and erecting single pole and neutral distribution board (SPNDB), with 2ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame Specification No:- SW-SWR/MCBDB
1303Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitablefor DP MCB/TP MCB/FP MCB/RCCB/RCBO complete erected on provided angle iron/GI frame.
1304Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
1305Supplying, erecting & commissioning 4 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
1306Supplying, erecting & commissioning 4 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete Specification No:- SW-RCCB/RCCB
1307Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe Specification No:- CB-LT/CU
1308Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe Specification No:- CB-LT/CU
1309Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe Specification No:- CB-LT/CU
1310Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe Specification No:- CB-LT/CU
1311Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI
1312Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.
1313Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete. (for Lift Earthing)
1314Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-corrosive bond with required joints Specification no:- EA/EP .
1315Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete.
1316Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV
1317Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty Specification No:- FG-ODF/FLS2.
1318Supplying & erecting three phase, 415V, street light control panel up to the max load of 6kW, TPN MCB 40A, powder coated CRCA 14 SWG sheet, outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protection on provided iron frame / CC foundation.
1319Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short circuit breaking capacity (Icn) 10kA in provided distribution board Specification no:- SW-SWR/MCB
1320Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per Specification no:- CB-LT/AL
1321Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe Specification no:- CB-LT/AL
1322Supplying & erecting G.I. pipe ‘A’ class 40mm dia. erected for enclosing XLPE armoured cable on wall/pole Specification no:- CB-CE
1323Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
1324Providing & erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 200 mm A/F, top 100 mm A/F on providedfoundation Specification no:- OH-PL/OPL
1325Providing and erecting galvanised 1500mm single arm sword type bracket with FRP dome and ball as per Specification no:- OH-PL/PBKT
1326Providing and erecting galvanised 1500mm double arm sword type bracket with FRP dome and ball as per Specification no:- OH-PL/PBKT
1327Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP
1328Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results Specification no:- EA-EP
1329Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete. (As per Standerd Weight of 8 SWG GI wire = 0.116 kg/mtr )
1330Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing orany other purpose).
1331Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including suppl of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).
1332Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
1333Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
1334Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
1335Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 8 ways /24 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB
1336Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
1337Supplying & erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole Specification no:- CB-CE
1338Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
1339Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results Specification no:- EA-EP
1340Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/conduit with screws complete.
1341Supplying and erecting minimum Three & above star rated submersible pump set of 7.5 KW/10 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 200 to 800 LPM discharge at 79 to 9 m head & discharge & delivery pipe of Size-80 mm diameter with a necessary H type clamps as per specification No. WP-SMP
1342Supplying and erecting minimum Three & above star rated 3 phase, 415 V, 50 Hz, submersible pump set of 7.5 KW/10HP suitable for erection on open well, pump having delivery head from 72 to 28 m and discharge from 120 to 840 litres. per minute & pipe of Suction 65 mm/Delivery 50 mm diameter erected with necessary H type clamps as per specification No. WP-OSP
1343Supplying & erecting flat flexible 3 core 2.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.
1344Supplying & erecting flat flexible 3 core 6 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.
1345Supplying & erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc .
1346Supplying and erecting ISI mark GI pipe 50 mm dia.‘B’ class at position with accessories complete as per Specification No:- CW-PLB/GP.
1347Supplying and erecting high density polythene pipe ISI mark 50 mm. dia. suitable for pressure of 6 kg. / cm2 connected to jet/submersible pump with required material complete.
1348Supplying and erecting non return valve 50 mm dia. in position made of gun metal complete.
1349Providing & erecting 4 Pole MCCB, 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB
1350Supplying and erecting SS enclosure for MCCB suitable for above 250 A up to 800A MCCB.
1351Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.
1352Supplying and erecting AC three phase HT CT multifunction net meter DLMS compliance of accuracy class 0.5, 3x 63.5V, 50Hz, with backlit LCD display, optical port & RS 232 port( measures import kWh, kVAh, export kWh, kVAh, net kWh, kVAh, V, I, kW, 6 months history of energy, load survey, TOD, tamper detection & logging, power ON/OFF events, instantaneous parameters of rating 1/5A with display in absence of power) with wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.
1353Supplying, installation & marking of surge arrestor / surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 100 kA for three phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD
1354Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 185 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
1355Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no:-EA-MOBI
1356Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.
1357Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/conduit with screws complete. (As per Standerd Weight of 8 SWG GI Wire = 0.116 kg/mtr )
1358Providing and erecting 545 to 550 Watt Framed Dual Glass Bi-Facial Solar Module Panel Having Mechnical Cheracterics of 272x1133x35(LxWxT),Weight 333 KG, Front Glass 2 mm Low Iron HTAR semi-tempered glass and Back Glass 2 mm Low Iron Printed semi-tempered glass,Having Electrical Characterics of Vmp of 41-43 Volt DC,Current 13A DC,Juncton Box IP65,MC4 Cable Connector with Sq mm,500mm Cable including in Panel Junction Box.Bifecial Power output at 30%Rediation 700W,at Module Efficiency of 27%With 5 Years of On- Site Warranty.
1359Providing and erecting of Transformerless Solar On Grid String Inverter having Capacity of suitable wattage,Having Mechanical Characteristics of IP65 Rating,5 to 6 Inch Multi Information LCD Display. Electrical Characterics of 1000V DC Input Voltage,Input Power of 1200W DC,MPPT Voltage Range of 200 to 850V,Startup Voltage of 180V,Nominal Output Power 10KW AC,Output Voltage of 400V,3Ph,5 Wire AC(3L/N/PE),Max Output Current of 15A AC,with Powerfactor Adjustable to +0.80 to-0.80. Including all Accessorles like ACDB,DCDB,WIring, Earthing,DC &AC Cables of Approprlate slzes.
1360Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.
1361Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
1362Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
1363Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
1364Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 100 kVA up to 125 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF.
1365Excavating soft murum / soft soil road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site good complete.
1366Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose). (for D.G.)
1367Supplying and erecting ISI mark GI pipe 75/80 mm dia.‘B’ class at position with accessories complete. Specification no:- CW-PLB/GP.
1368Supplying, erecting, testing and commissioning of diesel generating set confirming to CPCB-IV plus Emission Norms with alternator of 125 kVA output continuous rating, 3 phase, 415 V, 50 Hz, 0.8 p.f., A.C. supply, a totally enclosed air cooled / liquid cooled multi cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2/G3 and maximum fuel consumption 42.30 ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti- librating pads, with suitable capacity DEF tank standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 425 ltr etc., on provided M20 grade CC foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG
1369Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
1370Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
1371Supplying, erecting & marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
1372Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
1373Providing & erecting 3 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB
1374Providing & erecting 3 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure / panel as per specification no. SW-SWR/MCCB
1375Providing & erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure / panel as per specification no. SW-SWR/MCCB
1376Providing & erecting 3 Pole MCCB 415V, 400A (315A), rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB
1377Providing & erecting 4 Pole MCCB 415V, 400A (315A), rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB
1378Providing & erecting 3 Pole MCCB 415V, 630A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB
1379Supplying, erecting, testing & commissioning 11kV, 630A, 21kA/3sec, 4 way outdoor, extensible motorised SCADA compatible RMU, internal arc tested consisting of 2 nos. feeder with 2 LBS and 2 nos. feeder with 2 VCB compliant to IEC 62271 -100, 200 and 102, as per specification no. SW-HTS/RMU SCADA
1380Supplying, erecting, testing & commissioning 11kV, 630A, 21kA/3sec, 6 way outdoor, extensible motorised SCADA compatible RMU, internal arc tested consisting of 2 nos. feeder with 2 LBS and 4 nos. feeder with 4 VCB compliant to IEC 62271 -100, 200 and 102, as per specification no. SW-HTS/RMU SCADA
1381Supplying & erecting porcelain/epoxy bus bar support complete erected in provided M.S. box for 200/300A
1382Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.
1383Supplying and erecting GI sheet 1.6 mm (16 SWG) caution board of size 200 x 150 mm duly painted with red oxide and enamel paint in Marathi, Hindi and English erected at position for medium voltage (415 Volt) installation with compliance to IS 2551-1982. (Reaffirmed in 2020).
1384Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.
1385Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm. with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP BB (0.8m x 4 no. of 25x5mm)
1386Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A having accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs and mounting hardware on provided pane complete with calibration certificate from manufacturer.
1387Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5 ,AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.
1388Supplying and erecting Intelligent flush mounted panel meter three phase four wire (IPM) input voltage measurement range 50-550 V AC (P-P) 415V, aux. supply 90-300 V AC/DC, flush mounted (96 x 96 mm) meter constant Wh viewing in LCD multifunction meters in auto scroll mode with voltage, current, frequency, power factor kW, kVA, kVAR, kWh, kVAh, kVARh, phase angle, interrupts, THD, complete with RS 485 communication protocol, class 1 accuracy and wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.
1389Supplying and erecting selector switch suitable for voltmeter/ammeter for 3 phase AC supply 500V, 50Hz, on provided box / panel and duly connecting with necessary PVC wire leads and lugs.
1390Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.
1391Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.
1392Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.
1393Supplying, installation & marking of surge arrestor / surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 100 kA for three phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD
1394Supplying, installation & marking of surge arrestor/ surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 50 kA for three phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD
1395Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
1396Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 120 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT
1397Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 300 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT
1398Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT
1399Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessary material as per specification no. CB-JT/HT
1400Providing and erecting Heat shrinkable outdoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT
1401Providing and erecting Heat shrinkable out door termination kit for 11 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessary material as per specification no. CB-JT/HT
1402Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.
1403Supplying & laying (including excavation) half round reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.
1404Supplying and laying (including excavation of suitable width & depth up to 90 cm) 146 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
1405Supplying & erecting cast iron cable indicator plate buried along with route of cable for PVC / XLPE armoured cable as per specification No. CB-CIP
1406Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP
1407Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP
1408Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. [ 25 x 5mm strip x 30 mtr= 30 x 1.2 kg/mtr = 36 kg ]
1409Supplying, installing, testing & commissioning 3 phase, 11/0.433 kV, 50 Hz., 315 kVA, Mineral oil immersed and naturally cooled outdoor type, copper wound Non-sealed transformer delta/star connected with additional neutral brought out on load side, temperature rise should not exceed 45℃ by thermometer in oil and 50 ℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with HV tapping (with off load tap changer)off load +2.5 to -5 in steps of 2.5%, having 4 number of tap positions, with standard accessories complete with test certificate with losses below 780 Watts at 50% load, 2300 Watts at 100% load as per IS:1180 (part 1) : 2014 , with necessary permissions of Electrical Inspector, as per specification no SS- TR-NSL.
1410Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC foundation and painted complete as per specification no SS-AS/FSG
1411Supplying and erecting 50 x 50 x 6 mm angle iron as corner support 2m long fixed at the middle of the fencing frame and the other side inclined at 30 degree angle, in cement concrete foundation of 15 x 15 x 40 cm complete duly painted with one coat of red oxide and two coats aluminium paint complete.
1412Supplying and erecting double leaf hinged door each 1500 mm in width x 1850 mm in height using B class, GI pipe with angle iron supports, chain link wire mesh (jali) complete supported on channel iron, erected in foundation, and painted complete as per specification no SS-AS/DLD
1413Supplying and spreading stone metal 25 mm size for 100 mm depth above the ground level complete.
1414Making transformer plinth (1.5 x 1.5 x 1.5) m in size with necessary excavation in ground with 150 mm. thick M- 10 PCC at the bottom and top and 250 mm. thick, burnt brick wall constructed at periphery and remaining hollow portion shall be filled with 40mm hard broken aggregate. External surface duly plastered by 12 mm thick including watering etc complete.
1415Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose). (for R.M.U.)
1416SITC of Electric Traction Passenger Lift with · Rated capacity :- 8 Passenger/544Kg · Floors :- G+11 floor (12 Stops/12 Landings) · Travel :- 21 to 29.4 mtrs-
1417SITC of Electric Traction Passenger Lift with · Rated capacity :- 13 Passenger/884Kg · Floors :- G+11 floor (12 Stops/12 Landings) · Travel :- 36 to 42 mtrs · Location of Lift Machine:- MR/MRL ----------------- for Detailed Wording of item Please Refer Tender Book let
1418Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON.
1419Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
1420Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW
1421Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.
1422Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
1423Supplying and erecting PVC Surface modular double mounting plate 4 module complete duly erected.
1424Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
1425Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
1426Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
1427Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
1428Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
1429Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 2 ways (2 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB
1430Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.
1431Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
1432Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
1433Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete.
1434Supplying & erecting of High definition 4/5 Megapixel IP IR varifocal Bullet Camera with following featuresImage Sensor : minimum 1/ 2.8\\" Progressive Scan CMOS,Video Resolution : minimum 2592 x 1520Video compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame Rate : minimum 25 fps at all resolutions. WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type: 2.8 - 13mm Lens, auto/motorized varifocal focal,Field of View : horizontal FOV 103° to 32°, vertical FOV 73° to 24°, diagonal FOV 142° to 40°Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance Min IR- 50m, Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 – Vandal Resistant, built in micro SD/SDHC/SDXC card slot of min 128 GB, built in microphone.minimum Input/Output- Audio in × 1, Audio Out × 1 , Alarm in× 1, Alarm Out × 1.Image Settings: Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements: Day/ Night-Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation.
1435Supplying, installing, testing & commissioning of 16Ch. 4K AI Network Video Recorder(NVR) 16Ch. 4K Network Video Recorder Up to 16 channel IP camera inputInstastream/H.265/Smart H.264+/H.264 codec decoding Up to 8MP resolution preview and playback Max. 160Mbps incoming bandwidth or higher Support 2 SATA HDDs up to 10TB Each, 2 USB Ports (1 front USB 2.0 port, 1 rear USB 3.0 port) HDMI/ VGA Heterogeneous video outputSupport Multi-brand network cameras ONVIF Version conformanceRoHS, UL, CE, FCC certified. duly erected in provided U Rack with wiring connections, tagging and programming etc. complete as per specificationss no. CCTV-NVR
1436Supplying, installing, testing & commissioning of 64 Ch Network Video Recorder (NVR)64Ch. 4K AI Network Video Recorder Up to 64 channel IP camera inputMax. Decoding capability: 32 × 1080p@30fpsMax. 320 Mbps Incoming/ Recording/ Outgoing bandwidth or higher AI by Recorder: supports 8 channel face detection and recognition, up to 20 face databases and 200,000 face images, 8 channel metadata, 24 channel perimeter protection, 32 channel SMD Plus.AI by Camera: supports face detection and recognition, perimeter protection, SMD Plus, meta data, ANPR, stereo analysis, heat map, and people counting Support redundant power, RAID 0/1/5/6/10, N+M cluster Support 8 SATA HHDs up to 10TB Each, 4 USB Port Support Multi-brand network cameras ONVIF Version conformance 2 HDMI / 2 VGA simultaneous video outputRoHS, UL, CE, FCC certified.duly erected in provided U Rack with wiring connections, tagging and programming etc. complete asper specificationss no. CCTV-NVR
1437Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Port of NVR, interface transfer rate 6 GB/S, maximum sustained transfer rate 210 MB/Sec to 213 MB/S. Drive bay supported 08+, Cameras supported up to 64, Cache (MB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year 180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specification no. CCTV-HDD
1438Supplying & erecting 55\\" professional LED display with 1920 *1080 ( Full HD) Display, suitable for 32/64 channel NVR and following features Brightness: minimum 500 Cd/m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC,USB, Audio In,Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications no. CCTV-MON
1439Supplying and erecting HMS PVC conduit FRLS grade 20 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
1440Supplying and laying HMS PVC conduit FRLS grade 20 mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
1441Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
1442Supplying and laying HMS PVC conduit FRLS grade 25mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
1443Supplying and erecting 10m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.
1444Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC
1445Supplying and installing armoured single mode optical fibre cable with 6 fiber, core dia 50/125μm (OS1/OS2) 10/40 GBPS speed in provided underground HDPE pipe complete.
1446Supplying, fixing, and configuring 20 Ports+4G Combo, Managed Layer 2, POE Switch erected in provided rack complete.
1447Supplying, fixing, and configuring 24 ports + (4 SFP+) POE switch, 370W, 6KV surge protection on ethernet port and console port for management on provided rack as per specification No. WG-NWC/ENS
1448Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP
1449Supplying and fixing POE adaptor to provide DC supply to ethernet devices as per specification No. WG-NAS/PEA
1450Supplying and fixing 6U wall mount rack (Dimension- LxWxH – 500x600x367 mm) as per specification No. WG-NAS/RAK
1451Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.
1452Supplying and laying HMS PVC conduit FRLS grade 25mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.
1453Supplying and erecting modular type computer Jack RJ45 with safety shutter, duly erected on provided plate and box with wiring connections complete.
1454Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.
1455Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC
1456Supplying and erecting LSZH armoured multimode optical fibre cable with 24 fibres, core dia 50/125 µm (OM3), suitable up to 10 GBPS ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC
1457Supplying and fixing 1 m length, UTP patch cord of enhanced Cat 6 type with 4-connector channel, performance test report as per ANSI/TIA-568.2-D in position as per specification No. WG-COC/PC
1458Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed switch with web view/CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WGNWC/ GBS
1459Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.
1460Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO
1461Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP
1462Supplying and fixing 6U wall mount rack (Dimension- LxWxH – 500x600x367 mm) as per specification No. WG-NAS/RAK
1463Supplying, erecting, testing and commissioning of 6kVA capacity online pure sine wave with backup time of HALF hrs. PWM & IGBT based UPS with 0.9 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS
1464Supplying and erecting 12V/42Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete
1465Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.
1466Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.
1467Supplying, installation, testing and commissioning of main fire pump(MFP / EP) suitable for water discharge of 2280 to 2850 LPM at 120 to 90 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 75kW or of suitable kW capacity for manual/automatic operation and consisting of following:(a) Horizontal type, single stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/EP
1468Supplying, installation, testing and commissioning of jockey fire pump (JP)suitable for water discharge of 180 to 240 LPM at 110 to 90 m head drivenby electric motor 415 volts, 3 phase 50 Hz, AC supply of 11 kW or ofsuitable kW capacity for manual/automatic operation and consisting of following:(a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body& bronze impeller with stainless steel shaft (SS410 grade), mechanical sealconforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitablefor operation with IP 55 protection for enclosure, horizontal foot mounted typewith Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation boltsetc. as required.(d) Erected on provided suitable size cement concrete foundation duly plasteredwith anti vibration pads with perfect aligning, proper levelling complete pump setwith accessories duly painted with two coats of synthetic enamel paint of fire redcolour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, asper specification no. FF-MFP/JP
1469Supplying, installation, testing and commissioning of main fire pump(MFP/DP) suitable for water discharge of 2280 to 2850 LPM at 120 to 90 mhead driven by 110 HP or suitable HP capacity diesel engine at requiredworking speed suitable for automatic operation and consisting of following :(a) Horizontal type, single stage, centrifugal casing pump of cast iron body &bronze impeller with stainless steel shaft(SS410 grade), mechanical sealconforming to IS 1520.(b) Water cooled with radiator, diesel engine conforming to relevant IS standardcomplete with auto starting mechanism, 12/24 volts DC electric startingequipment with battery of required AH capacity with necessary charger suitable towork on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with firstfilling of diesel up to 100% level with necessary piping with valves up to engine ,exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mmthick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer,instruments and protection as per standard specification, stop solenoid for autostop in the event of fault with audio indications etc. as required.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation boltsetc. as required.(d) Erected on provided suitable size cement concrete foundation duly plasteredwith anti vibration pads with perfect aligning, proper levelling complete pump setwith engine assembly and accessories duly painted with two coats of syntheticenamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932of 2003) complete, as per specification no. FF-MFP/SSC/DP
1470Supplying, erecting, testing & commissioning of fire pump control panel (FCP) of cubical construction, floor mounted type, fabricated from minimum 2 mm thick CRCA sheet, compartmentalised with hinged lockable doors, with enclosure protection class IP54, duly powder coated or painted with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003), cable alley, interconnection with suitable size solid copper busbar strip of adequate size for all power connections having switchgears and accessories, mountings and internal wiring with adequate size copper conductor cable, earth terminals, numbering etc. complete in all respect, suitable for satisfactory operation of main fire pump and jockey (pressurisation) pumps (1working+1standby) with necessary accessories, wiring & cabling along with allied accessories with following incoming and outgoings, suitable for automatic & manual operation on 415V, 3 phase, 50Hz ac supply as per specificationsthe capacity of electric motor driven pump are as followsa. Main fire pump(MFP) having capacity of 22kW 1no (1 working)b. Jockey pump(JP) capacity of suitable capacity 2 nos(1 working +1 standby, alternate run per start in auto mode) comprises of the following features & switchgears:1. Main incomer FP SFU having rotary handle with HRC fuses of suitable rating.2. Electrolytic grade copper strips for busbar of suitable sizes for main incomer and branches to motor SFU's, starters & outgoing terminals with necessary accessories like stainless steel nut bolts with spring washers for connections, mounted on required no of epoxy or porcelain support insulators of suitable ratings etc. 3. Individual pump TPN SFU having rotary handle with HRC fuses of suitable rating. ----------------- for Detailed Wording of item Please Refer Tender Book let
1471Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 25 mm dia with necessary fittings complete as per specification no. FF-PP
1472Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessaryfittings complete as per specification no. FF-PP
1473Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete as per specification no. FF-PP
1474Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete as per specification no. FF-PP
1475Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings complete as per specification no. FF-PP
1476Supplying and erecting 100 mm dia cast iron foot valve ball type/flap type with strainer for negative suction complete as per specification no. FF-VL/FV
1477Supplying and erecting 150 mm dia cast iron foot valve ball type/flap type with strainer for negative suction complete as per specification no. FF-VL/FV
1478Supplying and erecting cast iron double flange sluice valve 75/80 mm dia. complete as per specification no. FF-VL/SV
1479Supplying and erecting cast iron double flange sluice valve 100 mm dia. complete as per specification no. FF-VL/SV
1480Supplying and erecting cast iron double flange sluice valve 160 mm dia. complete as per specification no. FF-VL/SV
1481Supplying and erecting cast iron double flange sluice valve 200 mm dia. complete as per specification no. FF-VL/SV
1482Supplying & erecting cast iron double flange butterfly valve of size 100 mm dia. complete as per specification no. FF-VL/BFV
1483Supplying & erecting cast iron double flange butterfly valve of size 150 mm dia. complete as per specification no. FF-VL/BFV
1484Supplying and erecting cast iron double flange NRV of size 100 mm dia complete as per specification no. FF-VL/NRV
1485Supplying and erecting 150 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV
1486Supplying & erecting gun metal gate valve of size 25 mm dia complete as per specification no. FF-VL/GV
1487Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV
1488Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) fitted with necessary accessories complete as per specification no. FF-FFA/HV
1489Supplying fire fighting controlled percolation (C.P.) Hose pipe, 63mm dia, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/CPH
1490Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63mm dia, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL
1491Supplying & erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specifications no. FF-FFA/NZ
1492Supplying and installing air vessel of 300 mm dia 1.5m in height M.S. tank installed inside pump house / on terrace complete as per specification no. FF-FFA/ACT
1493Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF- FFA/ARV
1494Supplying and installing pressure switch with 12/15 mm dia isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS
1495Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG
1496Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8\\"x6\\") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.
1497Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB- LT/CU
1498Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 2 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP.
1499Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty FFAFAS/SD
1500Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices/ceiling cable trenches/less ventilation area's etc. with 3 years equipment replacement warranty IS : 2175 - 1988 reaffirmed 2000, IS 15908:2021 standards FF-AFAS/SD.
1501Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with \\"Break Glass\\" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty FF-AFAS/MCP.
1502Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH.
1503Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 mm (½\\") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FFSPR.
1504Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete.
1505Supplying and erecting ABC powder type fire extinguisher as per IS:13849 /15683 of 6kg capacity with necessary clamp for erection on wall
1506Supplying, installing, testing and commissioning of Fire Exit Sinages Acralic sheet with autoglow sinages of sizes 300x150mm with complete accessories.
1507Supplying and erecting D.C.P. type fire extinguisher 6 kg capacity cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and brackets conforming to IS 2171-1985/ IS 15683 and complete erected with necessary clamps made from 50x6 mm M.S. flat with nuts & bolts grouted in wall complete.
1508Supplying & erecting fire bucket of 9 Litres capacity 04 nos. with MS stand.
1509Supplying, installing, testing and commissioning of Commercial Heat pump, having dimension : 1020 x 846 x 1840 (mm) max., Input power: 10.3 kW, 400 V, 3 Ph, 50 Hz, Output power: 38 kW having hot water temperature range 35°C to 52°C and ambient temperature range for max. efficiency 7°C to 43°C, with top throw fan, tube type heat exchanger 5 nos. inbuilt temperature sensor and two pressure sensors, centrally controlled operation, operational noise level: 65 dBA with provision for controlling auxiliary heater with necessary accessories complete with 5 years ON-SITE warranty.
1510Supplying, installation and testing and commissioning of storage type Mild Steel mixing water tank of capacity 3000 ltrs. tested to a pressure of 8 kg/cm2, insulated with 50 mm thick rock wool with wire mesh around and cladded with 26 SWG aluminium of dish end type with working pressure of 6 kg/cm2, fabricated with 6 mm thick MS plate and dished ends with 8 mm thick plates complete with man hole cover, inner side of the tank coated with FRP coating of 3 mm thickness withstand temperature of 90°C provided with collars of 2\\" BSP for provision to install 6 numbers of electrical heating coils if required with thermal sensors for automatic operation and integrated into the electrical circuits of the circulation pumps and the heat pump with safety valve drain, inlet and outlet nozzle, pressure gauge with all necessary accessories complete.
1511Supplying, installation and testing and commissioning of storage type Mild Steel mixing water tank of capacity 5000 ltrs. tested to a pressure of 8 kg/cm2, insulated with 50 mm thick rock wool with wire mesh around and cladded with 26 SWG aluminium of dish end type with working pressure of 6 kg/cm2, fabricated with 6 mm thick plate and dished ends with 8 mm thick plates complete with man hole cover, inner side of the tank coated with FRP coating of 3 mm thickness withstand temperature of 90°C provided with collars of 2\\" BSP for provision to install 6 numbers of electrical heating coils if required with thermal sensors for automatic operation and integrated into the electrical circuits of the circulation pumps and the heat pump with safety valve drain, inlet and outlet nozzle, pressure gauge with all necessary accessories complete.
1512Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
1513Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB
1514Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 4 ways /12 Poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB
1515Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB
1516Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
1517Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
1518Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
1519Supplying & erecting Pressure Booster Pump, single phase, 50C/s, A.C. supply of 0.375 KW/ 0.5 H.P., With discharge of 120 to 12 LPM for 10 to 40 Mtr Head & 25 mm suction/ 25 mm delivery pipe, for Domestic Pressure boosting applications.
1520Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps).
1521Supplying, installing, testing and commissioning of Re-circulation pump with Auto temperature kit flow 2m3/hr Head 10 Mtrs, Power 1.0 H.P M.o.c.Pump housing Cast iron, impeller stainless steel 304.Temp range up to 90°C
1522Supplying, installing, testing and commissioning of Hot water return line pump, flow 3m3/hr Head 20 mtr, power 1 H.P, M.o.c. of pump, Pump housing Cast iron,impeller stainless steel 304,Temp range up to 90deg. control panel temperature and timers base control with digital display ,with all accessories.
1523Supplying and erecting 20 mm dia., 2.8 mm min. thickness polypropylele Random Copolymer pipe, conforming to IS 15801 : 2008 duly joined by compression/ crimp fitted accessories, with internal as well as external end sealing arrangement for Solar Water Heater System as per specification No. ESD-HWP/PCP.
1524Supplying and erecting 25 mm dia., 3.5 mm min. thickness polypropylele Random Copolymer pipe, conforming to IS 15801 2008 duly joined by compression/crimp fitted accessories, with internal as well as external end sealing arrangement for Solar Water Heater System as per specification No. ESD-HWP/PCP.
1525Supplying and erecting 32 mm dia., 4.4 mm min. thickness polypropylele Random Copolymer pipe, conforming to IS 15801: 2008 duly joined by compression/crimp fitted accessories, with internal as well as external end sealing arrangement for Solar Water Heater System as per specification No. ESD-HWP/PCP. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57955060
AUTHORITY Government Departments
TENDER VALUE 54.28 Crore
LAST DATE 26-10-2026
Authority
Authority Name Public Works Department
Work Description Tender for Construction Of Boys Hostel For Department Of Social Justice For 500 Student Capacity With Electrifcation In The C Us Of Laxminarayana Innovation Technological University, Nagpur
Basic Detail
Tender No pwc/ngp/IUM/12-3/2026-27
Bidding Type Tender
Location
City Nagpur
State Maharashtra
Key Dates
Publish Date 09 Oct 2026
Submission Date 26 Oct 2026
Open Date 28 Oct 2026
Finance
Tender Value 54.28 Crore
Tender Fee 3540
EMD 27.14 Lakhs
Exemption Not Available
Document List
4e7a28c0-a8a6-43b6-931b-1d7146e56778.html
BOQ_2297028.xls
Tendernotice_1.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 09, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Oct 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
html

4e7a28c0-a8a6-43b6-931b-1d7146e56778.html

xls

BOQ_2297028.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender