Tender For Construction of Sahidi Gate In The Name Of Martyr Sh. Arvind Singh In Village Hathol Block Nadau Distt. Hamirpur. (Sh: Construction of Gate) (Under Mmgsy) Estimated Cost:-Rs. 361036.00 Earnest Money:- Rs. 7300.00 Time Limit:- Two Months
Tender Value
3.61 Lakhs
Estimated cost
Bid Submission
17 Oct 2026
3 days left
EMD
7300
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of Sahidi Gate In The Name Of Martyr Sh. Arvind Singh In Village Hathol Block Nadau Distt. Hamirpur. (Sh: Construction of Gate) (Under Mmgsy) Estimated Cost:-Rs. 361036.00 Earnest Money:- Rs. 7300.00 Time Limit:- Two Months
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation for all type of road structure such as retaining walls ,breast walls, culverts, drains and parapets etcetera in all type of classification of soil comprising of ordinary soil . ordinary rock, hard rock, chiseling/ wedging out of rock (where blasting is prohibited ) as per drawings and M.O.R.D technical specification clause 305-1 and as per direction of the Engineer-in- Charge including setting out, construction of shoring and bracing removal of stumps and other deleterious materials and disposal of materials upto any leads and lifts including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm(one hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water ( surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:4:8 ( one cement : four coarse sand: Eight graded stone aggregate) 40 mm (forty millimetre ) nominal size all work up to plinth level including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 3 | Providing and laying in position ready mixed plain cement concrete, M-25 (M-Twenty five) with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability All works upto plinth level as per direction of the Engineer- in-charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 4 | Steel reinforcement for R.C.C. work made of Tata/Tiscon /Sail including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 5 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (twelve millimetre) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (at the rate three point three kilogram per square metre) including pointing in white cement mixed with pigment of matching shade complete as per direction of the Engineer- in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 6 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 7 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade two or more coat applied @ 0.90 ltr/ 10 sqm (zero point nine zero liter/ ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (zero point eight zero liter/ ten square metre) of approved brand and manufacture including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 8 | Painting two coat (excluding priming coat) new steel and other metal surfacing with aluminium paint, brushing to give an even shade including cleaing the surface the durt dust and other foreign matter including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 9 | Providing and fixing 0.60mm (Zero point sixty millimeter) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNV) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyester of 5 (five) microns over 5 (five) microns priming coating including fixing with preprinted iron J or L hooks, volts and nuts 6mm (six millimeter) diameter with preprinted limpet and rubber washers complete with all accessories as required as per direction of Engineer in charge. including entire carriage of material in all leads and lifts. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 10 | Providing and fixing M.S. BP Sheet 1.66mm to 2mm (one point six six millimetre to two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 11 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( zero point five zero millimetre) + 0.05 % ( zero point zero five percentage) total coated thickness with zinc coating 120 ( one hundred twenty) grams per square metre as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen) microns. Sheet should have protective guard film of 25 ( twenty five) microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 ( twelve) metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size 5.5x 55 mm ( five point into fifty five millimetre) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 12 | Writing new letters and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per drawing and technical specification clause 1701 Engling and Roman Hyphens, commas and the like not to be measured and paid separately 6 cm (six centimetre ) height per letter including carriage of material within all leads and lifts and other incidentals The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender