Tender For Special Repairs To Roof Treatment, Mumty, Machine Rooms, Water Tanks And Other Connected Works At Issa Lab (Bldg No. P 147) Under Ge (I) R&D Delhi
Tender Value
1.14 Crore
Estimated cost
Bid Submission
23 Oct 2026
0 days left
EMD
1.89 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Roof Treatment, Mumty, Machine Rooms, Water Tanks And Other Connected Works At Issa Lab (Bldg No. P 147) Under Ge (I) R&D Delhi
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick tiles covering in terracing including stacking of serviceable material and disposal of unserviceable material outside MoD land complete all as specified and directed. |
| 2 | Demolishing mud phaska in terracing and disposal of material outside MoD land complete all as specified and directed. |
| 3 | Roughening of surfaces of old concrete slab by wire brushing, sweeping, cleaning and washing down with water to remove all loose dust etc. and applying bonding coat on prepared surface with repair polymer SBR of approved make, slurry coat (1 SBR : 3 cement : 1 water) on roof surface etc complete all as specified and directed . |
| 4 | M&L for providing Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) roof for water proofing treatment with as in padding on roof,projections of roof etc complete all as specified and directed. |
| 5 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. Termination of the membrane at 450mm from the roof level in groove of 50mm x 50mm filled with with PU sealant of approved make. The laying of membarance shall be got done through the authorised applicator of the manufacturer of membrane 3 mm thick complete all as specified and directed. |
| 6 | Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid over and including 20 mm thick cement sand mortar in the ratio of 1:4 using liquid water proofing compound as per manufacturers instructions(1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and directed. |
| 7 | Demolishing brick work built in In cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material outside MoD land as per direction of Engineer-in-charge complete all as specified and directed. |
| 8 | M&L Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) complete all as specified and directed. |
| 9 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design In 75x75 mm deep chase complete all as specified and directed. |
| 10 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete all as specified and directed. |
| 11 | Dismantling or taking down old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed. |
| 12 | M&L 15 mm cement plaster on brick walls of mix 1:4 (1 cement: 4 fine sand) complete all as specified and directed. |
| 13 | M&L 15 mm cement plaster on brick walls of mix 1:6 (1 cement: 6 fine sand) complete all as specified and directed. |
| 14 | M&L rendering 12mm thick on ceiling in cement mortar 1:3 with a floating coat complete all as specified and directed. |
| 15 | M&L for chipping of spalled and loose concrete and cleaning rust from reinforement by sand blasting scrubbing down concrete surface with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bounding coat of approved epoxy adheisve on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting over steel welded mesh 2mm dia of wire and aperature 75mm, avarage thickness of gunite n.exc 40mm thick in cement mortor (1:2) using OPC 43 grade cement mixed with polycrete admixture @ 7% by weight of cement or as per manufacturer instructions and finally applying cement plaster over gunite surface of required thickness to give even uniform and smooth finish conforming to proper geometrics in cement mortor (1:3) to match the existing surface as in sides and soffits etc of slabs, chajjas, fins, facias,parapets, lintels, columns and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 6 storey building including removing of small trees shrubs etc complete all as specified and directed. |
| 16 | Providing and laying cement concrete in parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and directed. |
| 17 | Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in Channels, angles, tees and flats etc complete all as specified and directed. |
| 18 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer complete all as specified and directed. |
| 19 | S&F Structural steel work in single section, as in doors,gate etc fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete all as specified and directed. |
| 20 | M&L for Applying primer With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works and applying two coats of synthetic enemel paint complete all as specified and directed |
| 21 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats with shutters architrave, holdfasts etc. complete and stacking within 50 metres lead of area 3 sq. metres and below all as specified and directed. |
| 22 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) Aluminium works For frame and shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) complete all as specified and directed. |
| 23 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) complete all as specified and directed. |
| 24 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) of Second class teak wood complete all as specified and directed. |
| 25 | Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges complete all as specified and directed |
| 26 | Providing and fixing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete all as specified and directed. |
| 27 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete all as specified and directed. |
| 28 | Providing and fixing in repair Brass 100mm mortice latch and lock with 6 levers with pair of handles (best make of approved quality) for doors including necessary cutting and making good etc. complete all as specified and directed. |
| 29 | Providing and fixing aluminium tower bolts 200x10 mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed |
| 30 | Providing and fixing aluminium handles,150 mm size ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed |
| 31 | Providing and fixing aluminium sliding door bolts,300X16 mm size ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc complete all as specified and directed. |
| 32 | Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) and applying two coats of synthetic enemel paint complete all as specified and directed |
| 33 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge complete all as specified and directed. |
| 34 | Providing and placing 1000 Ltr capacity on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete all as specified and directed. |
| 35 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge. |
| 36 | Providing and fixing G.I. pipes medium grade 25 mm dia nominal bore with G.I. fittings and clamps,i/c cutting and making good the walls etc. Exposed on wall complete all as specified and directed. |
| 37 | Providing and fixing G.I. pipes medium grade 40 mm dia nominal bore with G.I. fittings and clamps,i/c cutting and making good the walls etc. Exposed on wall complete all as specified and directed. |
| 38 | Providing and fixing 25 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) complete all as specified and directed. |
| 39 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 40 mm nominal bore complete all as specified and directed. |
| 40 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge complete all as specified and directed. |
| 41 | Providing and fixing false ceiling tiles at all heights with GRG(Glass fibre Reinforced Gypsum) with semi perforated 12 mm thick micro tegular edged GRG false ceiling of size 595X595 mm of approved texture, design and patterns having moisture content less than 2%,humidity resistance of 99%,NRCO.50 to 0.75 as per IS 8225:1987,Noncombustible as per BS 476(part-4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended or interlocking metal T grid of hot dipped galvanized iron section of 0.33 mm thick(galvanized @120 gms per sqm including both sides) comprising of main T runner of size 15X32 mm of length 3000 mm, cross T of size 15X32 mm of length 600 mm to form grid module of size 600x600mm,suspended from ceiling using galvanized mild steel items( galvanizing @80 gms per Sqm) i.e 50 mm long,8 mm outer dia meter M-6 dash fastners,6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85X25X2mm. Galvanized iron perimeter wall angle of size 24X24X0.40mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of Engr-In-charge complete all as specified and directed. |
| 42 | M&L for Finishing walls with Acrylic Smooth exterior paint of required shade on New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 43 | M&L Distempering two coats with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour complete all as specified and directed. |
| 44 | M&L White washing with lime to give an even shade on New work (three or more coats) complete all as specified and directed. |
| 45 | M&L for Polishing on wood work with ready made wax polish of approved brand and manufacture on Old work complete all as specified and directed. |
| 46 | complete Removing dry or oil bound distemper and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as specified and directed |
| 47 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade with two coats on old works complete all as specified and directed. |
| 48 | Complete removal of existing treatments and Finishing walls and soffits of chajjas,roof projection etc with Acrylic Smooth exterior paint of two coats of required shade on Old work by applying @ 1.67 ltr/ 10 sqm) complete all as specified and directed. |
| 49 | Supplying and fixing in repair rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover complete all as specified and directed. |
| 50 | Providing and fixing ball bearing for rolling shutters complete all as specified and directed. |
| 51 | Extra for providing mechanical device chain and crank operation for operating rolling shutters Exceeding 10.00 sqm and upto 16.80 sqm in the area complete all as specified and directed. |
| 52 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on old work over an under coat of suitable shade with ordinary paint of approved brand and manufacture complete all as specified and directed |
| 53 | Providing and fixing 100 mm sand cast Iron grating for gully trap complete all as specified and directed. |
| 54 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead 100 mm dia pipe complete all as specified and directed. |
| 55 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead 75 mm dia pipe complete all as specified and directed. |
| 56 | Providing and fixing soil, waste and vent pipes 100 mm dia Sand cast iron S&S pipe as per IS: 1729 complete all as specified and directed. |
| 57 | Providing and fixing soil, waste and vent pipes 75 mm dia Sand cast iron S&S pipe as per IS: 1729 complete all as specified and directed. |
| 58 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc For 100 mm dia pipe complete all as specified and directed. |
| 59 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc For 75 mm dia pipe complete all as specified and directed. |
| 60 | Providing and fixing plain bend of required degree 100 mm dia Sand cast iron S&S as per IS - 1729 complete all as specified and directed. |
| 61 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 100 mm dia Sand cast iron S&S as per IS - 1729 complete all as specified and directed. |
| 62 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 75 mm dia Sand cast iron S&S as per IS - 1729 complete all as specified and directed. |
| 63 | Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 100x100x100x100 mm Sand cast iron S&S as per IS - 1729 complete all as specified and directed. |
| 64 | Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 75X75X75X75 mm Sand cast iron S&S as per IS - 1729 complete all as specified and directed. |
| 65 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 100 mm complete all as specified and directed. |
| 66 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 75 mm complete all as specified and directed. |
| 67 | Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter 100 mm complete all as specified and directed. |
| 68 | Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter 75 mm complete all as specified and directed. |
| 69 | Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work 75 mm diameter pipe complete all as specified and directed. |
| 70 | Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work 100 mm diameter pipe complete all as specified and directed. |
| 71 | S&F Cast iron cowl to pipes 100 mm size complete all as specified and directed. |
| 72 | S&F Cast iron cowl to pipes 75 mm size complete all as specified and directed. |
| 73 | Demolishing cement concrete Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge complete all as specified and directed. |
| 74 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size as in base of flooring complete all as specified and directed. |
| 75 | M&L PCC 1:1.5;3 type A-1 as in Kerb,bounding of edges of interlocking tiles,coping and the like including watering & lightly rounded or chamfered angles and throating including centring and shuttering. complete all as specified and directed. |
| 76 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Dark shade pigment using ordinary cement all as specified and directed |
| 77 | S&F Factory made precast heavy duty drain/ manhole covers with MS frame and reinforcement as per IS 12592 (2002) complete all as specified and directed. |
| 78 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead out side the MOD land, for all leads including all lifts involved complete all as specified and directed. |
| 79 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of G.S. Sheet complete all as specified and directed. |
| 80 | M&L for Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete all as specified and directed. Please Enable Macros to View BoQ information |
| 81 | M&L for Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender