Tender For Renovation Works In Hi-Tech Parlour Building And Repair Works In Play Equipments&Renovation Works In The Gm Quarters&Providing Concrete R In The Dairy Entrance Of Main Dairy, Madurai
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Oct 2026
11 days left
EMD
26454
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Madurai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Works In Hi-Tech Parlour Building And Repair Works In Play Equipments&Renovation Works In The Gm Quarters&Providing Concrete R In The Dairy Entrance Of Main Dairy, Madurai
BOQ
| Sl. No. | Item Description |
| 1 | Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: 50x44.45x2.50mm @ 1.292 kg/m ,Bottom rail: 100 x44.45 x 2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m, Alu Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 Kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - Each., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete complying with standard specification and as directed by the deparmental officers. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete |
| 2 | Supply and installation of a frameless glass partition fabricated 8mm clear glass + 1.52mm PVB + 6mm performance glass from 12 mm thick clear toughened glass Providing,assemblingand supplyingoflaminated glass panels for SKYLIGHT using heat Strengthened clear Glass and toughenedglasssandwichedusing1.52PVBlayer.TheGlassof approvedcolour, sizeand shape as required shade all complete for the required performance , as directed by the Engineer - in - Charge. The heat strengthened clear glass having properties as U value of 4.20 to 5.50 W/m2 or lowerdegreeKetc., Solar heatgaincoefficientlessthanorequalto0.35.Thesandwichpanels shall be assembled in the factory/ workshop of the glass processor. The certificate obtained from approvedagencyshouldbeproducedforheat soak test for clear glass. For payment, only the actualareaofglassonface#1oftheglasspanels(excludingtheareasofthegroovesand weathersiliconesealant)providedandfixedinposition,shallbemeasuredinsqmetc., complete complying with standard specification |
| 3 | Labour charges for fabricating the Rolling shutter gate using MS angle sections suitable sizes. The rate inclusive of cost of all materials, labour charge for fixing in position, one coat of metal primer and conveyance, etc., complete as directed. |
| 4 | Labour charges for reparing SS Gate in the parlour The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance,electrical charges, etc. complete |
| 5 | Dismantling the Existing ceramic tile flooring / dadoing / Mosic Flooring etc., including clearing away by shifting the unwanted dismantled materilas for disposal by local conveyance with a lead up to 10 KM including loading and unloading charges etc., complete as direced. |
| 6 | Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in accordance with IS 1443 over a cement mortar bed of 20mm thick in Cement Mortar 1:3 (One Cement and Three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification |
| 7 | Wash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia ‘B’ Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mm dia Nylon Connection, 15mm dia Brass Nipples, 15mm CP Pillar Tap etc |
| 8 | Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications |
| 9 | Supplying and fixing in position Indian water closet of size 580x440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap conforming to IS 2556-Part XII with 10 lit capacity PVC flush tank and internal fittings with sand cushion and forming, flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to case iron soil pipes by dismantling brick masonary, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without quality with 'P' trap or 'S' trap conforming to IS:2556 leakage etc., complete complying with standard specifications. |
| 10 | Supplying and fixing in position Indian make white glazed earthernware Magnum urinal of ISI standard and best approved colour urinal of best approved quality with G.I.pipe connection of 32mm, bell mouthed, waste Pipe, 15mm. dia G.M. Gate value bring the urinal to the wall in position with necessary T.W.Plugs, clamps, shellac etc., including dismantling masonry if necessary and readoing the same to original condition fixing the 15mm. dia G.I.pipe and wheel valve. Painting the pipe with two coats of approved paint over one coat of primer and checked without any breakage complete complying with standard specification. |
| 11 | Supplying and fixing C.P. towel rack of size 600mm x 200 mm of approved make and quality including fixing in position with brass screws etc. complete. |
| 12 | Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter |
| 13 | Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification. |
| 14 | Painting two coats with ready mixed synthetic enamel paint over red oxide primer finished new iron grills including cleaning, preparing the surfaces, cost and coveyance of all materials etc., complete. |
| 15 | Repair and service the electrical points with labour charges |
| 16 | Supply and fixing of 16 Amps two Module socket on suitable PVC surface mounting box with modular cover plate on wall with electrical connections etc., complete. |
| 17 | Clearing the Heavy Jungle by deploying JCB and the same stacked away from the work spot for disposal. The rate inclusive of Hire charges for machinary, fuel and driver betta, etc., complete. |
| 18 | Earth work excavation for foundation by manual means for Isolated, Combined and Other type foundations in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification |
| 19 | Supplying and filling in foundation, basement, etc with filling crushed stone M sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification |
| 20 | Plain Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification |
| 21 | Reinforced Cement Concrete 1:2:4 (One Cement, Two sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers |
| 22 | Supplying, fabricating and placing in position of TMT rods for all RCC works including cost of steel binding wire and labour charges for fabrication but excluding the cost of concrete and centering as per standard specification. |
| 23 | Brick work in following Cement Mortar using best quality of II Class Ground Moulded Chamber Burnt Brick of size 9\\" x 43/8\\" x 23/4\\"for foundation and basement including curing, etc., complete complying with standard specification. |
| 24 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. |
| 25 | pvc valve |
| 26 | pvc tape |
| 27 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including curing etc. complete complying with standard specification |
| 28 | Supplying, fabricating and erection of MS Trusses complying with standard specifications. including anchor & connection bolt ,welding as per IS 816, of approved quality and colour after sand blasting with necessary hoisting, equipments, rope charges, etc, complete in all respects as directed by the federation officers. |
| 29 | Supplying, Placing and tensioning PVC coated of GI Chain link - 50mmx50mm x12 Gauge over the existing M.S.angle post at height of 1.5mtr with top and bottom to be fixed with a M.S. Flat of size 25x3mm Horizontal on both sides and also in the post inculding the provision of holes in M.S. flats and fixing GI bolt and nuts ( 25 x 3mm) with washers etc., complete. The rate is inculding cost of all materials , labour charges but exculding cost of M.S angle post and concrete pedestal. |
| 30 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener , side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. |
| 31 | Reparing the play equipments and sitting bench in the parlour it itcludes the cost of all material,labour,transport and painting the play equipments etc.. |
| 32 | Supply and fixing of acrylic letters with led light arrangements it include all material,labour,transport etc… complete complying with standard specification as directed by the departmental officer |
| 33 | Providing and fixing MS powder coated 0.47mm thick sheet roofing / side walling including the cost and conveyance of all to site and all labour charges and as per standard specifications and as per design etc complete. |
| 34 | Reparing the existing wooden door 4 nos in the gm quarters it itcludes the cost of all material,labour,transport etc.. complete complying with standard specification as directed by the departmental officer |
| 35 | Supply and fixing of 2 tonne split AC-5 star rated it include all material,labour,transport etc… complete complying with standard specification as directed by the departmental officer |
| 36 | Wiring with 2x1.5sq.mm .PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigidpipe on wall and ceiling with PVC accessories and with TW switchbox and 5AFT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (6 points per coil) |
| 37 | Supply and fixing of lyse gate light for compound light it include all material,labour,transport etc… complete complying with standard specification as directed by the departmental officer |
| 38 | Supply and fixing of MDF C shaped wall mounted tv unit for living room it include all material,labour,transport etc… complete complying with standard specification as directed by the departmental officer |
| 39 | Supply and fixing of mirror 1000mmx750mm it include all material,labour,transport etc… complete complying with standard specification as directed by the departmental officer |
| 40 | Supply and fixing of washbasin unit it include all material,labour,transport etc… complete complying with standard specification as directed by the departmental officer |
| 41 | Supplying and fixing of cuddapah slab of 30 mm thickness including cutting and polishing on both side etc.,complete complying with standard specification and as directed by the departmental officers. |
| 42 | Supply and fixing of folding type ironing slab it include all material,labour,transport etc… complete complying with standard specification as directed by the departmental officer |
| 43 | Supply and fixing of kitchen cubboard it include all material,labour,transport etc… complete complying with standard specification as directed by the departmental officer |
| 44 | Providing new UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames and include ss insect mesh. The window should be got approved from the Asst. Executive Engineer before use on work |
| 45 | Supply and fixing of mica in the table it include all material,labour,transport etc… complete complying with standard specification as directed by the departmental officer |
| 46 | Supply and fixing the Wardrobe size 2.00 x 0.90 x 0.50m the with using 19mm thick BWR/Termite proof plywood laminated with New Mika, model no.3399 SUD Rockwood Matt finish. The rate is including cost of all furniture fittings such as euro slow motion hinge, handles, locking arrangements etc., as per the photo model and as directed by the departmental officer |
| 47 | Supplying and fixing of steel weld mesh Partition using 40x40x6mm mild steel L / T angle and 75x25-10G welded mesh & Mild steel flat 30x6mm as directed by the departmental officers with necessary of sizes including cutting, welding and labour charges etc., complete as directed by the departmental officers. |
| 48 | Supplying and laying of Interlocking Paver Block Stone 63 mm the. Over a base layer of sand filling incl. Cost of materials laying and Labour charges etc., as directed by the departmental officials. |
| 49 | Supply and fixing PVC pipe 100mm dia (having working pressure 6 kg. / sq.cm) with necessary specials etc. etc, complete as directed by the federation officers and as per standard specification |
| 50 | Removing old Ms gate and providing new Ms gate for a total size of 6.3mx3.2m it incl. Cost of materials and Labour charges,transport ,priming coat and two coats of enamel paintetc., as directed by the departmental officials.(gate model attached in tender document0 |
| 51 | GST (Note: The tenderer should quote the amount towards Goods and Service tax (GST) in the appropriate columns in terms of percentage (%). If not quoted, it will be considered that the rate quoted is inclusive of GST.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender