Tender For Restoration Of Rain Damages Of Augmentation Of Lwss From Sainj Khad To Gharog Ghandal & Its Adj. Panchayats In Tehsil-Shimla Distt. Shimla (H.P) (Sh:- Construction of Storage Tank At Sangti & Distribution System)(Under Pdna)
Tender Value
49.85 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
9 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages Of Augmentation Of Lwss From Sainj Khad To Gharog Ghandal & Its Adj. Panchayats In Tehsil-Shimla Distt. Shimla (H.P) (Sh:- Construction of Storage Tank At Sangti & Distribution System)(Under Pdna)
BOQ
| Sl. No. | Item Description |
| 1 | Description |
| 2 | Excavation in earth work and disposal of all excavated earth up to a lead of 20 metres and lift upto a 1.50 mtrs, disposed earth to be levelled and neatly dressed a per direction of Engineer-in-Charge. For civil work |
| 3 | For pipe line |
| 4 | Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in:- |
| 5 | Foundation and Plinth |
| 6 | Providing and laying cement concrete 1:1.5:3 ( 1 cement : 1.5 sand : 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work & reinforcement for reinforced concrete work in:- (M-30) |
| 7 | Foundation footing bases of columns and the like & mass concrete. |
| 8 | ii) Walls (any thickness but not less than 0.1 m thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level. |
| 9 | Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30x30x5 mm so as to give a fair finish i/c centring ,shuttering, strutting and propping etc. with wooden battens & ballies, ht. of propping & centring below supporting floor to ceiling not exceeding 4 mtrs. & removal of the same for insitu-reinforced concrete work in : |
| 10 | Vertical surfaces such as walls ( any thickness ) partitions and the like including attached pilasters , buttresses, plinth and string courses and the like . |
| 11 | Providing form work of ordinary timber planking's so as to give a fair finish including centering, shuttering, propping etc. height of propping & centring below supporting floor to ceiling not exceeding 4 mtrs. removal of the same for-in-situ reinforced concrete & plain concrete in:- |
| 12 | Arches beyond 6 mtrs span. |
| 13 | Providing RCC work smooth finishing of the exposed surface with cement mortor 1:3 (1cement:3 sand) |
| 14 | Providing and laying cement concrete 1:2:4 work (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for RCC work in:- |
| 15 | Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilever up to floor two levels. |
| 16 | Arches upto floor two level. |
| 17 | Providing mild steel/tor Steel reinforcement for R.C.C work including bending , binding and placing in position complete up to floor two level. |
| 18 | Steel work weidedin built up section, trusses and framed work i/c cutting,hoisting,fittingin position complete in grating ,framed guards & ladders etc. |
| 19 | Providing and fixinf of CI sluice valve (with hand wheel) as per IS:780-1984 class-I upto 300 mm dia (i/c brass spindle & as per 2906-1984 class-II for dia 100 mm) complete with bolts nuts ,rubber insertion etc.(the tail piece if required shall be measured & paid for seperately) 100 mm dia |
| 20 | Manfacturing MS Manhole Cover 600x450mm with Frame of MS Angle 50x50x6mm and cover of black sheet 2.00mm thick complete with angle frames, flates etc including welding with locking arrangemets(Locks) (excluding Cement Concrete) |
| 21 | Providing,Laying & Jointing in trenches followinf dia metres of GMS pipes (Earth work in trenches to be measured and paid for saprately) including all leads and lifts and carriage of material at site and as directed by the Engineer-in-charge. |
| 22 | 15 mm dia |
| 23 | 20 mm dia |
| 24 | 25 mm dia |
| 25 | 40 mm dia |
| 26 | 100 mm dia (Scour pipe ) |
| 27 | Providing and fixing of brass full way wheel valve with hand wheel including all leads and lifts and carriage of material at site and as directed by the Engineer-in-charge. |
| 28 | 15 mm dia |
| 29 | 20 mm dia |
| 30 | 25 mm dia |
| 31 | 32 mm dia |
| 32 | 40 mm dia |
| 33 | 50 mm dia |
| 34 | Providing and fixing GI union including all leads and lifts and carriage of material at site and ans directed by the Engineer-in-charge. |
| 35 | 15 mm dia |
| 36 | 20 mm dia |
| 37 | 25 mm dia |
| 38 | 32 mm dia |
| 39 | 40 mm dia Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender