Tender For Improvement Of Lis Behli, Santoo Tilla, Kuthera Kherla, Panjoa And Nandpur Takarla In Tehsil Amb Distt. Una (Hp) (Sub Head :- Providing Laying Of Hdpe Pipe In Distribusion System And Construction Of Out Lets Of Lis Behli-2Nd) Job -10
Tender Value
5.30 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
5 days left
EMD
10609
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Una → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Lis Behli, Santoo Tilla, Kuthera Kherla, Panjoa And Nandpur Takarla In Tehsil Amb Distt. Una (Hp) (Sub Head :- Providing Laying Of Hdpe Pipe In Distribusion System And Construction Of Out Lets Of Lis Behli-2Nd) Job -10
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundations, trenches etc., in earth work. In all kind of soil such as spade work, pick work, jumper work, blasting work in soft and hard rock chiselling / wedging out of rock where blasting is prohibited and in saturated soil etc. in all leads and lifts, stacking the excavated soil not more than 3 metres clear from the edge of excavation and then returning the stacked soil in fifteen centimetre layers, when required into plinths sides of foundations etc. consolidating each deposited layer by ramming and dewatering and then disposing of all surplus excavated earth with in all leads and lifts and as per direction and to the entire satisfaction of the Engineer-in-Charge. |
| 2 | Providing Laying in trenches HDPE pipesof following diameters & classes as per IS 4984,PE-80 and jointing the pipes through push type compression joints by hydraulically operated machines upto 110 mm diameter and butt fussion ( heat fusion process) above 110 mm diameter including necessary fittings, bends, tees and reducers fabricated in accoradance with IS 8360 & IS 8008 with latest ammendments & shall be provided as per site conditions.Flanging of the pipes shall be made as& where required confirming to code IS 8008 & IS 7634, stub ends will be welded on pipes & MS flange shall be provided with slip on covered by epoxy coating / plastic powder. The flange should be confirm to ANSI B 16.5 with necessary nuts and Bolts. Jointing shall be complete in all respects including testing at site upto entire satisfaction of engineer-in charge. |
| 3 | 140 mm dia ( Class PE 80 PN4) |
| 4 | 160 mm dia ( Class PE 80 PN4) |
| 5 | Providing and fixing cast iron Alfa valve of reputed make in outlet chamber to central the water for distribution system complete in all respect (in all lead & lifts.) |
| 6 | 140 mm dia |
| 7 | 160 mm dia |
| 8 | Providing and laying cement concrete 1:4:8( 1 cement 4 sand:8graded stone aggregate 40 mm.nominal size ) and curing complete excluding cost of form work in foundation and material within all leads and lifts as per the direction of the Engineer-in-Cahrge plinth including carriage of materials within all leads and lifts. |
| 9 | Ist class Brick work using common burnt clay building bricks in foundation and plinth in cement mortar 1:4 (1 cement :4 sand) using first class bricks and including carriage of materials with in all leads and lifts. |
| 10 | 40mm thick Cement concrete flooring 1 :2:4 (1 cement:2sand:4 graded stone aggregate 20 mm nominal size)'and laid in one layer finished with a floating coat on neat cement in all leads and lifts as per thesize)'and laid in one layer finished with a floating coat on neat cement in all leads and lifts as per the direction of engineer-in-Charge. |
| 11 | 15 mm thick cement plaster in single coat on fair side of brick/ stone masonry/concrete for interior plastering upto floor two level including arrises internal rounded angles chamfers angle not exceeding 80 mm in girth and finished even & smooth in cement mortor 1:4 (1 cement:4 sand) in all leads and lifts. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender