Tender For Name Of Work:- Restoration Of Rain Damage Lwss Jamog Juni In Gp Juni Tehsil. Sunni, Distt. Shimla (Sh:- Construction of Storage Tank At Golan 90000 Ltrs Cap.)(Under Pdna 2025
Tender Value
9.73 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
9 days left
EMD
19500
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Name Of Work:- Restoration Of Rain Damage Lwss Jamog Juni In Gp Juni Tehsil. Sunni, Distt. Shimla (Sh:- Construction of Storage Tank At Golan 90000 Ltrs Cap.)(Under Pdna 2025
BOQ
| Sl. No. | Item Description |
| 1 | Description |
| 2 | Cutting in earth work and disposal of excavated earth upto a lead of 20 meters Spade work,Pick work and Jumper work. |
| 3 | Excavation in foundation trenches etc. in earth work lift up to 1.5 mtrs. Stacking the excavated soil not more than 3 metres away from the edge of excavation and then returning the stacked soil in 15 cm layers when required in to plinth and sides of foundations, consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres in pick jumper work. |
| 4 | Providing and laying cement concrete 1:3:6( 1cement:3 sand: 6 graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of form work in |
| 5 | foundation and plinth. |
| 6 | Providing and laying cement concrete Design mix M-30 grade not less than 1:1.5:3 ( 1cement:1½ sand:3graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in :- |
| 7 | foundation and plinth. |
| 8 | Walls(any thickness but ot less than 0.1 mtr thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level. |
| 9 | Column |
| 10 | Suspended floors roofs, landing and shelves and their supports,balconies,beams,girders,bressumers and cantilever up to floor two levels. |
| 11 | Providing form work with steel plate 3.15 m.m thick welded with angle iron 30x30x5 m.m so as to givea fair finish including centering ,shuttering, propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plaiin concrete work in:- |
| 12 | Providing form work of steel sheets : Foundation footings,basis of columns etc & mass concrete. |
| 13 | Flat surfaces such as soffits of suspended floors, roofs landings and the like |
| 14 | Vertical surface such as walls(any thickness) partitions and the like including attached pillasters, butteresses, plinth and string courses and the like. |
| 15 | Providing form work of steel sheets in columns,pillars,posts and struts : Square,rectangular or polygonal in plan. |
| 16 | Providing and laying cement concrete 1:2:4 ( 1cement:2 sand: 4graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- |
| 17 | suspended floors, roofs,landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level. |
| 18 | Prov. Mild steel/ tor steel reinforcement for RCC work including bending, binding and placing in position i /c binding wire complete up to floor two level |
| 19 | Manufacturing MS Manhole Cover 600x450mm with Frame of MS Angle 50x50x6mm and cover of black sheet 2.00mm thick complete with angle frames, flates etc including welding with locking arrangemets (including cement concrete 1:1.5:3) |
| 20 | Providing Laying & Jointing in trenches GMS Tubes (Medium Grade) Tube fittings (Earth work in trenches to be measured and paid for saprately) 100 mm Dia (Scour Pipe) |
| 21 | Providing and fixing sand cast iron / cast iron spun spigot and sacketed soil waste and ventilating pipe (lead lanlked to be measured and paid for seperately)- 100 mm dia. |
| 22 | Providing and fixing CI sluice valve wheel valve with 100 mm nominal bore (ISI mark Ltd. Make) |
| 23 | Providing in RCC work smooth finishing of the exposed surfaces with cement mortar1:3 |
| 24 | Applying Birla White wall care Putty over plaster surface after throughly brushing the surface free from mortar drops , dust , loose , materails and other to give matters sand parpered smooth to give final matter finish to the surface complete. |
| 25 | Steel work welded in built up sections, trusses and framed work including cutting hoisting, fixing in position complete in grating, framed guards & ladders etc.(V.m 40x40x5 mm & H.M. 25x25x4 mm ) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender