Tender For Repair And Renovation Of Old Hostel Of Voti At Laxmisagar Bhubaneswar.
Tender Value
2.42 Crore
Estimated cost
Bid Submission
28 Oct 2026
1 days left
EMD
2.42 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of Old Hostel Of Voti At Laxmisagar Bhubaneswar.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned upto a lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm in thickness as per Clause 201 of MoRT&H Specifications for Road & Bridge works (5th Revision)and as per direction of Engineer-in-Charge. Main Building |
| 2 | Main Gate and Security Cabin |
| 3 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.50m initial lift including rough dressing breaking clods maximum 5cm to 7cm & laying in layers not exceeding 0.3m depth for the work complete including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of the water pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge. Excavation up to 1.5m height |
| 4 | Excavation up to 1.5m heightMain Gate and Security Cabin |
| 5 | Above 1.5m height Main Building |
| 6 | Above 1.5m heightMain Gate and Security Cabin |
| 7 | Supplying and filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge |
| 8 | Main Gate and Security Cabin |
| 9 | Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties of all materials and cost of all labours,labour cess, T&P etc complete as per the direction of the Engineer-in-charge. |
| 10 | Main Gate and Security Cabin |
| 11 | Filling in foundation, plinth and other low laying area with excavated materials including cost of all labour, T&P etc compete including watering and ramming as directed by the Engineer-in-charge. |
| 12 | Main Gate and Security Cabin |
| 13 | Supplying, diluting and preparing chemical emulsion like Imidacloprid 30.5 % SC or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as Pre-Constructional Anti-termite Treatment confirming to IS 6313 (Part-II) and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. at the rate of 7.5 liters per sqm on vertical surface and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center (or as directed by the manufacturer) including the cost of all materials, cost of all labour, conveyance, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge. |
| 14 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. Footing Main Building |
| 15 | Footing Main Gate and Security Cabin |
| 16 | Plinth Band PB Main Building |
| 17 | Plinth Band PB Main Gate and Security Cabin |
| 18 | Columns and Beam Ground FloorMain Building |
| 19 | Columns and Beam Ground FloorMain Gate and Security Cabin |
| 20 | Columns and Beam First FloorMain Building |
| 21 | RCC Roof slab ground floorMain Building |
| 22 | RCC Roof slab ground floorMain Gate and Security Cabin |
| 23 | RCC Roof slab First floor Main Building |
| 24 | Lintel ground floorMain Building |
| 25 | Lintel ground floorMain Gate and Security Cabin |
| 26 | Lintel First floorMain Building |
| 27 | Chajja Ground floorMain Building |
| 28 | Chajja First floorMain Building |
| 29 | Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.Ground FloorMain Building |
| 30 | Ground FloorMain Gate and Security Cabin |
| 31 | First floor |
| 32 | Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.Foundation |
| 33 | FoundationMain Gate and Security Cabin |
| 34 | Super structure Main Building |
| 35 | Super structureMain Gate and Security Cabin |
| 36 | First floorMain Building |
| 37 | Fly Ash brick masonry in cement mortar (1:4) in foundation & plinth using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.Ground Floor Main Building |
| 38 | First floor Main Building |
| 39 | Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. Ground floor Main Building |
| 40 | Main Gate and Security Cabin |
| 41 | First floorMain Building |
| 42 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. Ground Floor, Main Building |
| 43 | Main Gate and Security Cabin |
| 44 | First floorMain Building |
| 45 | Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.Ground FloorMain Building |
| 46 | Main Gate and Security Cabin |
| 47 | First floorMain Building |
| 48 | Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge. First floor Main Building |
| 49 | Providing 4cm thick Grading Concrete over roof slab with cement concrete (1:2:4) using12mm & down grade size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.Second Floor Main Building |
| 50 | WATERPROOFING Providing and installing two component acrylic modified cementitious waterproofing coating with Masterseal 551 /Equivalent over roof slab after carrying out pond test on roof slab, filling all defects, saturating the surface, mixing the products and then application in 2.0 mm thickness (1.8 Kg / sqm coverage rate for 1.0 mm thickness) in suitable layers complete in all respect, all materials, tools, plant & labour complete in all respect. Density 1850kg/m³ , Mix ratio (Powder to liquid) 3:1 by weight ,Water penetration Din 1048 1.5 Bar no leakage Potlife @ 25°C 2 hours & @ 40°C 30 minutes, Recoatable: 8-12 hours Elongation >42% (air) & >31% (under water),Tensile strength >20 kg/cm2 ,VOC content (HK prod code P10-17) 0.5 g/LMain Building |
| 51 | Supplying, fitting and fixing vetrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm plain (Ivory) of approved make (JOHNSON / VARMORA/ OASIS / SOMANY/ KAJARIA or equivalent ) in floors on 20mm thick bed of C.M. (1:1) (1cement:1course sand) and filling the joint with white cement mixed with pigment to match the shades of the tileincluding cost of all materials, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge.Ground floorMain Building |
| 52 | Main Gate and Security Cabin |
| 53 | First floor Main Building |
| 54 | Fixing tiles (Vitrified) in dadoo, skirting and rises of steps on12 mm thick cement plaster in mortar 1:3 (1 cement: 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including all cost, conveyance, royalty taxes of matereials, Labour, Labour cess required to compete the work in all respect as per direction & specification by engineer in charge.Ground floorMain Building |
| 55 | Main Gate and Security Cabin |
| 56 | First floorMain Building |
| 57 | Fixing granite tiles of approved dimension area above 0.4 sqm (20mm thick) in floor, treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including all cost, conveyance, royalty taxes of matereials, Labour, Labour cess required to compete the work in all respect as per direction & specification by engineer in charge.Ground floorMain Building |
| 58 | Main Gate and Security Cabin |
| 59 | First floorMain Building |
| 60 | Fixing granite tiles of approved dimension area above 0.4 sqm (20mm thick) in Dados, treads of steps and landing on 12mm thick cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including all cost, conveyance, royalty taxes of matereials, Labour, Labour cess required to compete the work in all respect as per direction & specification by engineer in charge.Ground floor Main Building |
| 61 | Main Gate and Security Cabin |
| 62 | First floorMain Building |
| 63 | Fixing tiles (Industrial Vitrified Tiles) in floors treads or steps and landing on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including all cost, conveyance,royalty, taxes of matereials, Labour, Labour cess required to compete the work in all respect as per direction & specification by engineer in charge.Ground floorMain Building |
| 64 | Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including all cost, fittings and fixtures, conveyance, taxes of matereials, Labour, Labour cess required to compete the work in all respect as per direction & specification by engineer in charge.Main Building |
| 65 | First floorMain Building |
| 66 | Supplying ,fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures including all cost, conveyance, taxes of matereials, Labour, Labour cess required to compete the work in all respect as per direction & specification by engineer in charge..Main Building |
| 67 | First floorMain Building |
| 68 | Supply and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) Top-Hung Ventilator of NCL VEKA LTD./ FENESTA / KOMMERLING or equivalent three track - only two glass shutters sliding duly manufactured using UPVC reinforced profiles of 80mm x 52mm x 2.25mm or equivalent for outer frames, 54mm x 38mm x 2.25mm or equivalent for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2mm prefabricated & welded through fusion welding the window sash shall be fitted with 5mm thick clear float glass (toughened) of reputed make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 no., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant,easy glazing / deglazing at site with 10 years manufactures warranty for discoloration, wraping, mechanical failures, shrinkages, rotting, corrosion etc. with a quality certificate from relevant department of Govt. of India, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work (structural requirements profiles are to be got approved by the Engineer-in-Charge of the work before fabrication of the shutter) as per specification and direction of the Engineer-in-Charge. Main Building |
| 69 | First floorMain Building |
| 70 | Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. excluding painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P etc. complete in all respect as per specification & direction of the Engineer-in-Charge.Main Building |
| 71 | Main Gate and Security Cabin |
| 72 | First floorMain Building |
| 73 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge. Main Building |
| 74 | Finishing wall surface with acrylic wall putty (water based) of approved make and finished smooth on even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes with labour etc. complete as per direction of Engineer-in-charge.Main Building |
| 75 | Main Gate and Security Cabin |
| 76 | First floor |
| 77 | Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & approved shade over a coat of primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.Main Building |
| 78 | Main Gate and Security Cabin |
| 79 | First floorMain Building |
| 80 | Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge.Main Building |
| 81 | Main Gate and Security Cabin |
| 82 | First floorMain Building |
| 83 | Painting two coat with approved synthetic enamel paint to new wood & iron work over a coat of Red oxide primer including cost, conveyances, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.Main Building |
| 84 | Main Gate and Security Cabin |
| 85 | First floorMain Building |
| 86 | Providing and fixing Glass Reinforced Concrete (G.R.C) Screens in approved size, pattern, design, shade and thickness of 50mm on frame and design element in 30mm thick have weight approximately between 3.5 – 4 Kg per Sq. Ft. and color of M/S UniStone make or equivalent. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50% void space. The screens should be made from ‘53 grade’ White Portland Cement t, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by ‘N.E.G JAPAN’ or equivalent, Super Plasticizers manufactured by ‘BASF’ or equivalent, Polymers manufactured by ‘BASF’ or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by ‘BAYFERROX (Germany)’ or equivalent. The material casting should take place in FRP Molds. The fixing of Screens should be ‘Dry fixing’ i.e. to be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti/ Fischer including all cost, conveyance, taxes of matereials, Labour, Labour cess required to compete the work in all respect as per direction & specification by engineer in charge. Main Building |
| 87 | Supply and fixing of Membrane Tensile Roof Structure work MS round pipe, MS 100 dia round pipe along with MS plates, primer 1 coat and Epoxy paint two coated Manual for structure work (pipe) fabric fixing- aluminum top session profile and flat, self-drilling screw, fabric laying, cutting, welding, Tools & Equipments, Erection, all other accessories etc including all cost, conveyance, taxes of matereials, Labour, Labour cess required to compete the work in all respect as per direction & specification by engineer in charge.Main Building |
| 88 | Dismantaling brick or stone masonry in lime or cement motar under 3m height including stacking the useful materials for reuse and removing the debris within 50m lead including cost, conveyances, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.Main Building |
| 89 | Dismantling brick or stone masonry in clay above 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead including cost, conveyances, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.Main Building |
| 90 | Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead including cost, conveyances, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.Main Building |
| 91 | Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep stacking the useful materials for reuse and removing the debris within 50m lead including cost, conveyances, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.Main Building |
| 92 | Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m including cost, conveyances, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.Main Building |
| 93 | Dismantling Steel Work in all types of sections upto a height of 5 m above plinth level including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres excluding cutting of rivet but including dismembering, cost, conveyances, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.Main Building |
| 94 | Dismating and removing R.C.C. Columns, Beams, Slab, Staircase landings, lintels including stacking the useful materials for reuse and removing the debris within 50m. Lead including cost, conveyances, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.Main Building |
| 95 | Dismantling of Lime Concrete, cement concrete grade M-10 and below including T&P and scaffolding wherever necessary, sorting the dismantled material,disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres including cost, conveyances, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.Main Building |
| 96 | Removing old lime or cement plaster from walls including raking out joints 12 mm deep and removing the debris within 50m lead including cost, conveyances, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.Main Building |
| 97 | Dismantling G.C.I. or A.C. sheet roofing after carefully removing the bolts and nuts including stacking of he materials for reuse and removing the debris within 50m lead including cost, conveyances, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. Main Building |
| 98 | Providing fitting and fixing of Gypsum false ceilling with Aluminium anodised T Section No. 3215 with 2'-0\\" center to center, L section No. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2'-0\\"x2'-0\\" suspended from ceiling etc complete including all cost, conveyance, taxes of matereials, Labour, Labour cess required to compete the work in all respect as per direction & specification by engineer in charge.Interior Work |
| 99 | Interior WorkFirst floor |
| 100 | Supplying , fitting and fixing of grid mineral fibre ceiling board having size 600 mm x 600 mm x 16mm of approved design and quality complete with frame and all fitting and fixtures. complete including all cost, conveyance, taxes of matereials, Labour, Labour cess required to compete the work in all respect as per direction & specification by engineer in charge.Interior Work |
| 101 | Interior WorkFirst floor |
| 102 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.Interior Work |
| 103 | Interior WorkFirst floor |
| 104 | Supplying and fixing of Wall paneling made of aluminum anodised section framing conforming to standard Aluminium sections as horizontal and vertical members with atleast 600mm c/c and fixing of 9mm thick BWR ply with 4mm thick veneer pasting finished with melamine polishing complete including all cost, conveyance, taxes of matereials, Labour, Labour cess required to compete the work in all respect as per direction & specification by engineer in charge.Interior Work |
| 105 | Supplying and fixing of Roller blinds by fixing powder coated top channel, bottom channel with bottom end cap, control unit and good quality of 0.60 mm thick fabric of approved design and quality etc. complete including all cost, conveyance, taxes of matereials, Labour, Labour cess required to complete the work in all respect as per direction & specification by engineer in charge.Interior Work |
| 106 | Supplying and fixing of Wall paper vinyl coated ,paper based ,textured , embossed wth thickness 0 .3 mm min. of approved design fixed with adhesive over wall surface finished with putty and primer including cost of all material and labour etc. Complete including all cost, conveyance, taxes of matereials, Labour, Labour cess required to complete the work in all respect as per direction & specification by engineer in charge.Interior Work |
| 107 | Supply & laying of 12 mm laminated Wooden flooring of AC5 grade with 100 hours of water resistance, scratch proof, antibacterial quality, anti static flooring of eco friendly with plank size of 1234 x 196mm of reputed brand such as (Lamiwood/ SKIPPER) of design/shade Butterscotch walnut #6026. Rate includes complete installation with backing foam, necessary adhesive etc. including the cost of all materials, cost of all labour, Labour cess, conveyance, loading & unloading, and T&P, etc. complete in all respect as per direction of the Engineer in Charge.Interior Work |
| 108 | Supplying, fitting, fixing up Wardrobe made up 19mm BWR ply finishing with veneer pasting on front and other area covered with 1mm Laminate (Sunmica) including Cromium coated handel 75mm with 125 x 25mm / 100mm with 150 x 25mm including all fitting, cost of all materials, taxes, labour, Labour cess, T&P etc. complete as per direction of Engineer-in-Charge.Interior Work |
| 109 | Supplying, fitting, fixing up Wardrobe made up 19mm BWR ply covered with 1mm Laminate (Sunmica) including Cromium coated handel 75mm with 125 x 25mm / 100mm with 150 x 25mm including all fitting, cost of all materials, taxes, labour, Labour cess, T&P etc. complete as per direction of Engineer-in-Charge.Interior Work |
| 110 | Providing fitting & fixing of wall panelling made up with alluminium section B-9835 as base frame. The top surface cover with 18mm thick WPVC Board of Greenlam laminates/Greenply laminates/Century laminates/ Royale touche of approved make & design including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge.Interior Work |
| 111 | Providing fitting & fixing of wall panelling made up with 8mm thick WPVC Board (with out All Section) Greenlam laminates/Greenply laminates/Century laminates/ Royale touche of approved make & design including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge.Interior Work |
| 112 | Providing, Fitting & Pasting of 1mm thick Sunmica of Greenlam laminates/Greenply laminates/Century laminates/ Royale touche Similar make & design over wall panelling/Door border including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge.Interior Work |
| 113 | Melamine polishing to wood work one or more coats including cost, conveyances, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.Interior Work |
| 114 | Supplying and fixing of Charcoal louver(combination of charcoaland polystyrene 8 to 12 mm thick in the way indicated by manufacturer (EUROPRATIK or equivalent brand) as per the design including cost of all material and labour etc. Complete as per the direction of Engineer-in-charge.Interior Work |
| 115 | Providing and fixing 12mm Thick Frameless of Toughened Glass door shutter of approved brand and Manufacture, Including providing and fixing top and bottom pivot double acting hydraulic froor spring type fixing arrangement and making Necessary Holes etc for fixing required door fittings all complete asper direction of Eic.(Door handle ,lock and stopper etc paid to be separately.Interior Work |
| 116 | Supplying and fixing of Acrylic glass laminate 1.5mm thickin the way indicated by manufacturer (EUROPRATIK or equivalent brand) as per the design including cost of all material, labour and conveyance etc. Complete as per the direction of Engineer-in-charge.Interior Work |
| 117 | Supplying, fitting, and fixing in position single-size wooden bed (Godrej, Adriana, or approved equivalent make) complete with integrated pull-out storage drawers, constructed using approved quality commercial plywood/engineered wood/hardwood conforming to relevant IS codes, finished with approved shade of laminate/veneer/paint including all necessary hardware fittings, heavy-duty telescopic drawer channels, handles, magnetic catches, edge banding, adhesives, fasteners, and necessary polish/finishing. Item includes cost of all materials, labor, tools, equipment, staging, transportation, loading, unloading, lead, lift, and conveyance to all levels complete in all respects as per detailed drawing, specification, and direction of the Engineer-in-Charge.Interior Work |
| 118 | Supplying, fitting, and fixing in position bedside table made of prelaminated particle board (Godrej, Upmods, or approved equivalent make) conforming to IS 12823 (Exterior Grade - Grade I, Type II), comprising drawer(s) / open shelf / cabinet shutter as per design drawings. Item to include 2.0 mm thick PVC edge banding on all exposed edges glued using hot-melt adhesive, heavy-duty telescopic drawer channels, handles, magnetic catches, levelers, hardware fittings, and fasteners. Complete including cost of all materials, labor, tools, tackle, transportation, loading, unloading, lead, lift, and conveyance to all floor levels in all respects as per approved drawing, specification, and direction of the Engineer-in-Charge.Interior Work |
| 119 | Supplying, fitting, and fixing in position particle board study table (Godrej, Adria, or approved equivalent make) conforming to IS 12823 (Exterior Grade - Grade I, Type II), featuring pre-laminated finish, integrated storage drawers/shelving units as per approved design, including 2.0 mm thick PVC edge banding on all exposed edges applied via automatic edge-banding machine, heavy-duty telescopic drawer channels, locking arrangement, handles, leveling feet, hardware fittings, and fasteners. Complete including cost of all materials, labor, tools, equipment, transportation, loading, unloading, lead, lift, and conveyance to all floor levels complete in all respects as per detailed drawing, technical specification, and direction of the Engineer-in-Charge.Interior Work |
| 120 | Supplying, fitting, fixing, and positioning in place high-back/full-back ergonomic office chair (Godrej Aero or equivalent approved make) upholstered with high-breathability knitted mesh fabric in Black Ink shade. Unit featuring high-density molded polyurethane foam seat cushion, class-4 pneumatic gas-lift height adjustment, synchro-tilt mechanism with multi-position lock, adjustable lumbar support, 2D/3D adjustable armrests, heavy-duty 5-star nylon/die-cast aluminum base with twin-wheel nylon casters conforming to BIFMA X5.1 standards. Complete including cost of all materials, labor, testing, transportation, loading, unloading, lead, lift, and conveyance to all floor levels in all respects as per approved sample, specification, and direction of the Engineer-in-Charge.Interior Work |
| 121 | Supplying, fitting, fixing, testing, and commissioning in position 43-inch (108 cm) 4K Ultra HD Smart LED Google TV (Sony BRAVIA 2 Series / Model: K-43S20B or equivalent approved make) with 3840 x 2160 pixels resolution, powered by 4K Processor X1, 4K X-Reality PRO engine, Motionflow XR, HDR10/HLG support, 20W open baffle speaker system with Dolby Audio, built-in Wi-Fi, Bluetooth 5.0, Chromecast, Apple AirPlay/HomeKit, 3 HDMI ports (eARC/ALLM compatible), and 1 USB port. Item includes heavy-duty powder-coated tiltable/fixed steel wall-mounting bracket, concealed cabling connections, power supply hookup, integration with audio/video feeds, initial setup, and testing. Complete including cost of all materials, hardware, labor, tools, equipment, transit insurance, loading, unloading, lead, lift, and conveyance to all floor levels in all respects as per approved drawing, specification, and direction of the Engineer-in-ChargeInterior Work |
| 122 | Supplying, fitting, fixing, and placing in position 2-seater synthetic leather/leatherette upholstered sofa (Godrej Interio - Parto Plus series or equivalent approved make) constructed with seasoned solid pinewood frame (moisture content 10–12%), 12 mm / 18 mm thickness commercial plywood sub-structure, high-density slab stock polyurethane foam cushion seat (minimum density 32 kg/m³), Recron conjugated hollow fiber backrest filling, heavy-duty nylon webbing support system, premium 1.0 mm thick stain-resistant leatherette upholstery in approved shade (Black / Tan Brown), wooden facia/accent details on armrests, and elevated PVC leg supports. Item includes cost of all materials, hardware, labor, tools, equipment, transit insurance, loading, unloading, lead, lift, and conveyance to all floor levels in all respects as per approved sample, drawings, and direction of the Engineer-in-Charge.Interior Work |
| 123 | Supplying, fitting, fixing, and positioning in place 3-seater synthetic leather/leatherette upholstered sofa (Godrej Interio - Bayflow series or equivalent approved make) constructed with seasoned solid pinewood frame (treated against wood borers/fungus, moisture content 10–12%) and commercial plywood sub-structure, high-resilience polyurethane foam cushion seat with waterfall edge design, ergonomic full-height backrest with soft pillowy filling, high-tensile elastic webbing base suspension, premium 1.0 mm thick stain-resistant leatherette upholstery in approved shade (Black / Toffee Beige / Blue), padded armrests with wooden accent details, and cylindrical leg base for floor elevation. Item includes cost of all materials, hardware, labor, tools, equipment, transit insurance, loading, unloading, lead, lift, and conveyance to all floor levels in all respects as per approved sample, drawings, and direction of the Engineer-in-Charge.Interior Work |
| 124 | Supplying, fitting, and fixing in position rectangular pre-laminated particle board coffee table / centre table (Godrej Interio - Meraki series or equivalent approved make) conforming to IS 12823 (Exterior Grade - Grade I, Type II), featuring a multi-functional two-level design with open/closed storage compartments, drawers, and dual-tone finish (Brown & Beige / Walnut). Core structure constructed from minimum 18 mm thick high-density pre-laminated particle board (PLT) with melamine impregnation, featuring 2.0 mm thick PVC edge banding on all exposed edges applied via automatic edge-banding machine, concealed knock-down (KD) hardware fittings, slide runners, and levelers. Complete including cost of all materials, labor, tools, equipment, transit insurance, loading, unloading, lead, lift, and conveyance to all floor levels in all respects as per approved sample, technical drawings, specifications, and direction of the Engineer-in-Charge.Interior Work |
| 125 | Supplying, fitting, and fixing in position engineered wood / pre-laminated particle board corner table / side table (Godrej Interio - Gracia series or equivalent approved make) conforming to IS 12823 / IS 14587 standards, featuring compact square/rectangular design with open display/storage shelves in warm wood finish. Core frame constructed using minimum 18 mm thick high-density engineered wood/pre-laminated particle board with melamine impregnation for scratch and stain resistance, complete with 2.0 mm thick PVC edge banding on all exposed edges applied via automatic edge-banding machine, concealed knock-down (KD) minifix connectors, dowels, and floor levelers/bush pads. Complete including cost of all materials, labor, tools, equipment, transit insurance, loading, unloading, lead, lift, and conveyance to all floor levels in all respects as per approved sample, drawings, specifications, and direction of the Engineer-in-Charge.Interior Work |
| 126 | Supplying, fitting, and fixing in position 6-seater rectangular dining table set (Godrej Interio - Jack series or equivalent approved make) comprising 1 (one) rectangular dining table and 6 (six) matching cushioned dining chairs. Table top constructed with high-density MDF / engineered wood core finished with natural Okoume wood veneer in rich brownish-black/walnut shade, supported on robust solid wood L-shaped understructure legs. Chairs constructed with seasoned solid wood frame, upholstered seat and back cushion filled with high-resilience polyurethane foam and stain-resistant fabric/leatherette. Complete including cost of all materials, knock-down (KD) hardware fittings, assembly, labor, tools, equipment, transit insurance, loading, unloading, lead, lift, and conveyance to all floor levels in all respects as per approved sample, drawings, specifications, and direction of the Engineer-in-ChargeInterior Work |
| 127 | Supplying, fitting, and fixing in position 4-seater rectangular wooden dining table set (Godrej Interio - Estana series or equivalent approved make) comprising 1 (one) rectangular dining table and 4 (four) matching cushioned dining chairs. Table top and understructure constructed using seasoned solid wood / high-density engineered wood core finished with premium natural wood veneer / walnut polish, supported on sturdy solid wood legs. Chairs constructed with seasoned solid wood frame, ergonomically contoured backrest, and high-density polyurethane (PU) foam cushioned seat upholstered in stain-resistant fabric/leatherette of approved shade. Complete including cost of all materials, knock-down (KD) assembly hardware, labor, tools, equipment, transit insurance, loading, unloading, lead, lift, and conveyance to all floor levels in all respects as per approved sample, drawings, specifications, and direction of the Engineer-in-Charge.Interior Work |
| 128 | Supplying, fitting, and fixing in position Executive Reception Desk (1200 mm Width) of approved make (Godrej Interio, Featherlite, Methodex, or equivalent) constructed using minimum 25 mm thick pre-laminated particle board / BWR grade plywood top and 18 mm thick side panels/modesty panel conforming to relevant IS codes, finished with approved shade of high-pressure laminate (HPL) / factory pre-lamination with 2.0 mm thick PVC edge banding on all exposed edges applied via automatic edge-banding machine. Desk featuring raised front fascia/counter top panel, cable management grommet, lockable drawer pedestal / storage unit with heavy-duty telescopic channels, multi-purpose master lock, brushed metal accents, and adjustable floor levelers. Item includes cost of all materials, hardware fittings, labor, tools, equipment, transit insurance, loading, unloading, lead, lift, and conveyance to all floor levels complete in all respects as per detailed drawing, specification, and direction of the Engineer-in-ChargeInterior Work |
| 129 | Construction of granular sub-base by providing Grading-VI material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.Main Gate and Security Cabin |
| 130 | Fixing tiles (Chequered Tiles) in floors treads or steps and landing on 25 mm thick bed of cement mortar 1:1 (1 cement: 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including cost, conveyance,and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.Main Gate and Security Cabin |
| 131 | Supplying, fitting, fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Three Track - Three Panel sliding window - 60 - Series duly manufactured using UPVC reinforced profiles of 108mm x 45mm x 2.5mm for outer frames and Window Sash of 39mm x 58mm x 2.5mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window frame shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc. including cost and conveyance of all materials, accessiries, labour charges, materials and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards.Main Gate and Security Cabin |
| 132 | Excavation of any approved type of soil in approved borrow area by mechanical means and unloading the soil within the lead of 5 KM on properly prepared & scientificaly approved surface including spreading & levelling the earth in 22.5cm layers to make ready for watering & compaction with sheep foot roller & dozers but excluding watering & compaction in dams & dykes for all heights including construction maintenance , watering & lighting of haul road & borrow area etc complete as per direction of Engineer-in-charge. (Measurement of the fill to be taken on the finished compacted section under OMC condition.) Main Gate and Security Cabin |
| 133 | TANDOOR VATTI WITH INSIDE CLAY POT WITH GAS FRIED.Supplying, fitting, fixing, testing, and commissioning in position stainless steel commercial gas-fired Tandoor Bhatti equipped with hand-crafted clay pot (m मिट्टी का तंदूर) interior. Structural body framed with 40 x 40 x 5 mm thick mild steel (M.S.) angle framework coated with anti-corrosive rust-proof primer/paint. Top surface clad with 16 S.W.G. (1.6 mm) Stainless Steel (SS 304/202 grade) sheet and side cladding encased with 18/20 S.W.G. (1.2 mm / 0.9 mm) Stainless Steel sheet. Cavity insulated with high-density glass wool thermal insulation. Complete with heavy-duty commercial LPG burner system, needle control valve, pilot burner, heavy-duty M.S. baffle plate, gas copper pigtail/hose connection, brass fittings, bottom ash/drain outlet, and mounted on 4 Nos. heavy-duty 4-inch (100 mm) diameter M.S./polyurethane swivel caster wheels (2 with brakes). Complete including cost, conveyance, loading, unloading, transit insurance, statutory taxes, GST, labor, labor cess, tools, plants (T&P), testing, and commissioning in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 134 | TANDOOR TABLE WITH 01 NO. BOTTOM SHELVESupplying, fitting, and fixing in position heavy-duty Stainless Steel Tandoor Preparation Table of overall size 600 mm (Length) x 800 mm (Width) x 900 mm (Working Height) + 150 mm (Rear Splash Back) equipped with 1 (one) bottom undershelf. Table top under-reinforced with a rigid 40 x 40 x 5 mm thick Mild Steel (M.S.) angle frame treated with anti-corrosive rust-proof primer/paint. Working top surface covered with 16 S.W.G. (1.6 mm thick) Stainless Steel (SS 304/202 grade) sheet, and bottom undershelf covered with 18 / 20 S.W.G. (1.2 mm / 0.9 mm thick) Stainless Steel sheet. Leg supports fabricated from 40 mm x 40 mm SS square pipes fitted with heavy-duty bullet-type adjustable fiber feet. Complete including cost, conveyance, transit insurance, loading, unloading, statutory taxes, GST, labor, labor cess, and tools & plants (T&P) required for the work complete in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 135 | TWO BURNER COOKING RANGE WITH ALL FITTINGSSupplying, fitting, fixing, testing, and commissioning in position commercial Two-Burner LPG Cooking Range of overall size 1200 mm (Length) x 700 mm (Width) x 850 mm (Working Height) + 150 mm (Rear Splash Back). Top understructure reinforced with 40 x 40 x 5 mm thick Mild Steel (M.S.) angle framework coated with anti-corrosive rust-proof paint. Top deck constructed with 16 S.W.G. (1.6 mm thick) Stainless Steel Grade 304 quality sheet, and side/rear cladding covered with 18 / 20 S.W.G. (1.2 mm / 0.9 mm thick) SS 304 quality sheet. Fitted with removable SS 304 drip trays, heavy-duty Cast Iron (C.I.) vessel pan supports, 2 Nos. heavy-duty commercial LPG burners, pilot burner assemblies, brass needle control valves, and internal copper gas piping connections. Legs fabricated from 40 mm x 40 mm SS 304 square pipes fitted with heavy-duty adjustable fiber feet. Complete including cost, conveyance, loading, unloading, transit insurance, statutory taxes, GST, labor, labor cess, and tools & plants (T&P) required for the work complete in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 136 | SINGLE SINK UNITSupplying, fitting, fixing, and commissioning in position commercial Single Sink Wash Unit of overall size 600 mm (Length) x 700 mm (Width) x 850 mm (Working Height) + 150 mm (Rear Splash Back). Top deck and deep-drawn/fabricated sink bowl constructed with 16 S.W.G. (1.6 mm thick) Stainless Steel Grade 304 quality sheet, under-reinforced with a 40 x 40 x 5 mm thick Mild Steel (M.S.) angle framework coated with anti-corrosive rust-proof paint. Front fascia (down to bottom level of sink bowl) covered with 20 S.W.G. (0.9 mm thick) SS 304 quality sheet apron cladding. Legs fabricated from 40 mm x 40 mm SS 304 square pipe fitted with heavy-duty adjustable fiber feet. Complete with brass chrome-plated swivelling gooseneck sink pillar cock/faucet, SS waste coupling, and PVC flexible drain pipe extension. Complete including cost, conveyance, loading, unloading, transit insurance, statutory taxes, GST, labor, labor cess, and tools & plants (T&P) required for the work complete in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 137 | (2+1) CHINESE COOKING RANGE WITH ALL FITTINGSSupplying, fitting, fixing, testing, and commissioning in position commercial (2 Main Wok + 1 Stock Pot) Chinese Cooking Range of overall size 1650 mm (Length) x 750 mm (Width) x 850 mm (Working Height) + 300 mm (High Backsplash). Top deck under-reinforced with 40 x 40 x 5 mm thick Mild Steel (M.S.) angle framework coated with anti-corrosive rust-proof paint. Top working surface constructed with heavy-duty 14 S.W.G. (2.0 mm thick) Stainless Steel sheet, and side/rear cladding covered with 18 / 20 S.W.G. (1.2 mm / 0.9 mm thick) Stainless Steel sheet. Features 3 (three) round heavy-duty Cast Iron (C.I.) pan rings/supports, integrated rear water spray pipe system, front/rear continuous water drainage channel, removable SS drip trays, suitable heavy-duty high-pressure LPG burners, pilot light assemblies, brass needle control valves, water swivel faucet, and internal copper gas manifold piping connections. Legs fabricated from 40 mm x 40 mm SS square pipe fitted with heavy-duty adjustable fiber feet. Complete including cost, conveyance, loading, unloading, transit insurance, statutory taxes, GST, labor, labor cess, and tools & plants (T&P) required for the work complete in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 138 | SINGLE BURNER COOKING RANGE WITH ALL FITTINGSSupplying, fitting, fixing, testing, and commissioning in position commercial Single-Burner LPG Cooking Range of overall size 600 mm (Length) x 750 mm (Width) x 850 mm (Working Height) + 150 mm (Rear Splash Back). Top understructure reinforced with 40 x 40 x 5 mm thick Mild Steel (M.S.) angle framework coated with anti-corrosive rust-proof paint. Top deck constructed with 16 S.W.G. (1.6 mm thick) Stainless Steel (SS 304/202 grade) sheet, and side/rear cladding covered with 18 / 20 S.W.G. (1.2 mm / 0.9 mm thick) Stainless Steel sheet. Fitted with removable SS drip tray, heavy-duty Cast Iron (C.I.) vessel pan support, 1 No. heavy-duty commercial LPG burner, pilot burner assembly, brass needle control valve, and internal copper gas piping connections. Legs fabricated from 40 mm x 40 mm SS square pipe fitted with heavy-duty adjustable fiber feet. Complete including cost, conveyance, loading, unloading, transit insurance, statutory taxes, GST, labor, labor cess, and tools & plants (T&P) required for the work complete in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 139 | WORK / SIDE TABLE WITH 02NOS. BOTTOM SHELVESupplying, fitting, and fixing in position heavy-duty Stainless Steel Work / Side Table of overall size 1100 mm (Length) x 700 mm (Width) x 850 mm (Working Height) + 150 mm (Rear Splash Back) equipped with 2 (two) nos. bottom undershelves. Table top under-reinforced with a rigid 40 x 40 x 5 mm thick Mild Steel (M.S.) angle framework coated with anti-corrosive rust-proof paint. Working top surface covered with 16 S.W.G. (1.6 mm thick) Stainless Steel Grade 304 quality sheet, and 2 nos. bottom undershelves covered with 18 / 20 S.W.G. (1.2 mm / 0.9 mm thick) SS 304 quality sheet. Leg supports fabricated from 40 mm x 40 mm SS 304 quality square pipes fitted with heavy-duty adjustable fiber/nylon bullet feet. Complete including cost, conveyance, transit insurance, loading, unloading, statutory taxes, GST, labor, labor cess, and tools & plants (T&P) required for the work complete in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 140 | DOSA HOT PLATE WITH THREE SIDE COVER & ALL FITTINGSSupplying, fitting, fixing, testing, and commissioning in position commercial Gas-Fired Dosa Hot Plate / Griddle Unit of overall size 900 mm (Length) x 750 mm (Width) x 850 mm (Working Height) + 150 mm (Rear Splash Back). Top cooking plate constructed from heavy-duty 16 mm thick machine-ground Mild Steel (M.S.) plate. Under-structure reinforced with a 40 x 40 x 5 mm thick Mild Steel angle framework coated with anti-corrosive rust-proof paint. Three side panels (front, left, and right) clad with 18 / 20 S.W.G. (1.2 mm / 0.9 mm thick) Stainless Steel (SS 304/202 grade) sheet. Unit equipped with a continuous oil/grease trough and removable SS waste oil collector tray. Fitted with high-pressure heavy-duty V-type / RV LPG burners, continuous pilot light assembly, brass needle control valves, and internal heavy-duty copper gas manifold piping. Legs fabricated from 40 mm x 40 mm SS square pipes fitted with heavy-duty adjustable fiber/nylon bullet feet. Complete including cost, conveyance, loading, unloading, transit insurance, statutory taxes, GST, labor, labor cess, and tools & plants (T&P) required for the work complete in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 141 | DOBLE DOOR UNDER COUNTER FREEZERSupplying, fitting, fixing, testing, and commissioning in position commercial Double Door Under-Counter Refrigerated Freezer Unit of overall size 1500 mm (Length) x 700 mm (Width) x 850 mm (Working Height). Main body frame constructed with 40 x 40 x 5 mm thick Mild Steel (M.S.) angle framework treated with anti-corrosive rust-proof paint. Top deck constructed with 16 S.W.G. (1.6 mm thick) Stainless Steel Grade 304 quality sheet, outer body clad with 20 S.W.G. (0.9 mm thick) SS 304 quality sheet, and inner cabinet tank lined with 22 / 24 S.W.G. (0.8 mm / 0.6 mm thick) SS 304 quality sheet. Thermally insulated throughout cabinet body and doors using high-density Polyurethane Foam (PUFF) insulation. Equipped with 2 (two) self-closing spring-hinged SS doors with lock-and-key facility, magnetic gaskets, and internal wire grid shelves. Refrigeration system featuring direct cooling with internal heavy-duty copper pipe evaporator coiling, Emerson (Copeland) make sealed compressor, heavy-duty air-cooled condenser unit with copper tubing, condenser fan motor, digital temperature controller with LED display, and ON/OFF power switch. Legs fabricated from 40 mm x 40 mm SS 304 quality square pipe fitted with heavy-duty adjustable fiber feet. Complete including cost, conveyance, loading, unloading, transit insurance, statutory taxes, GST, labor, labor cess, tools & plants (T&P), testing, and commissioning in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 142 | OVER HEAD SHELEV FOR UNDER COUNTER FREEZERSupplying, fitting, and securely fixing in position Stainless Steel Overhead Shelving Unit (designed for mounting over 1500 mm under-counter freezer) of overall size 1500 mm (Length) x 250 mm (Width) x 450 mm (Shelf Height) + 300 mm (Rear Splash Back / Riser). Shelves constructed using heavy-duty 18 S.W.G. (1.2 mm thick) Stainless Steel (SS 304/202 grade) sheet, under-reinforced with SS channel stiffeners. Vertical supporting legs fabricated from 25 mm diameter heavy-gauge Stainless Steel circular pipe, fitted with flange bases / mounting brackets anchored directly to the under-counter worktop surface. Complete including cost, conveyance, loading, unloading, transit insurance, statutory taxes, GST, labor, labor cess, tools & plants (T&P), and mounting hardware complete in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 143 | PICK-UP TABLE WITH 02NOS. BOTTOM SHELVESupplying, fitting, and fixing in position heavy-duty Stainless Steel Pick-Up Table / Food Dispatch Table of overall size 600 mm (Length) x 700 mm (Width) x 850 mm (Working Height) equipped with 2 (two) nos. bottom undershelves. Table top under-reinforced with a rigid 40 x 40 x 5 mm thick Mild Steel (M.S.) angle framework coated with anti-corrosive rust-proof paint. Working top surface covered with 16 S.W.G. (1.6 mm thick) Stainless Steel (SS 304/202 grade) sheet, and 2 nos. bottom undershelves covered with 18 / 20 S.W.G. (1.2 mm / 0.9 mm thick) Stainless Steel sheet. Leg supports fabricated from 40 mm x 40 mm SS square pipes fitted with heavy-duty adjustable fiber/nylon bullet feet. Complete including cost, conveyance, transit insurance, loading, unloading, statutory taxes, GST, labor, labor cess, and tools & plants (T&P) required for the work complete in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 144 | PICK-UP TABLE WITH 02NOS. BOTTOM SHELVESupplying, fitting, and fixing in position heavy-duty Stainless Steel Pick-Up Table / Food Pass-Through Table of overall size 1100 mm (Length) x 700 mm (Width) x 850 mm (Working Height) equipped with 2 (two) nos. bottom undershelves. Table top under-reinforced with a rigid 40 x 40 x 5 mm thick Mild Steel (M.S.) angle framework coated with anti-corrosive rust-proof paint. Working top surface covered with 16 S.W.G. (1.6 mm thick) Stainless Steel Grade 304 quality sheet, and 2 nos. bottom undershelves covered with 18 / 20 S.W.G. (1.2 mm / 0.9 mm thick) SS 304 quality sheet. Leg supports fabricated from 40 mm x 40 mm SS 304 quality square pipes fitted with heavy-duty adjustable fiber/nylon bullet feet. Complete including cost, conveyance, transit insurance, loading, unloading, statutory taxes, GST, labor, labor cess, and tools & plants (T&P) required for the work complete in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 145 | OVER HEAD SHELEV FOR UNDER COUNTER FREEZERSupplying, fitting, and securely fixing in position Stainless Steel Overhead Shelving Unit (designed for mounting over 1100 mm under-counter freezer) of overall size 1100 mm (Length) x 250 mm (Width) x 450 mm (Shelf Height) + 300 mm (Rear Splash Back / Riser). Shelves constructed using heavy-duty 18 S.W.G. (1.2 mm thick) Stainless Steel (SS 304/202 grade) sheet, under-reinforced with SS channel stiffeners. Vertical supporting legs fabricated from 25 mm diameter heavy-gauge Stainless Steel circular pipe, fitted with flange bases / mounting brackets anchored directly to the under-counter worktop surface. Complete including cost, conveyance, loading, unloading, transit insurance, statutory taxes, GST, labor, labor cess, tools & plants (T&P), and mounting hardware complete in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 146 | DOOR FREEZERSupplying, fitting, fixing, testing, and commissioning in position commercial Upright Door Freezer Unit of overall size 1200 mm (Length) x 750 mm (Width) x 2000 mm (Height). Main structural skeleton fabricated from 40 x 40 x 5 mm thick Mild Steel (M.S.) angle framework coated with anti-corrosive rust-proof paint. Top portion covered with 16 S.W.G. (1.6 mm thick) Stainless Steel sheet, exterior body clad with 20 S.W.G. (0.9 mm thick) Stainless Steel sheet, and inner storage cabinet tank lined with 22 / 24 S.W.G. (0.8 mm / 0.6 mm thick) Stainless Steel sheet. Thermally insulated throughout the body cabinet and doors using high-density Polyurethane Foam (PUFF) insulation. Equipped with self-closing spring-hinged SS insulated doors with lock-and-key facility, magnetic door gaskets, and heavy-duty adjustable internal SS wire grid shelves. Refrigeration system featuring direct cooling with internal heavy-duty copper pipe evaporator coiling, Emerson (Copeland) make sealed commercial compressor unit, heavy-duty air-cooled condenser unit with copper tubing, condenser fan motor, digital temperature controller with LED display, and power ON/OFF switch. Legs fabricated from 40 mm x 40 mm SS square pipes fitted with heavy-duty adjustable fiber feet. Complete including cost, conveyance, loading, unloading, transit insurance, statutory taxes, GST, labor, labor cess, tools & plants (T&P), testing, and commissioning in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 147 | DOUBLE DOOR DEEP FREEZERSupplying, fitting, fixing, testing, and commissioning in position commercial Double Door Chest Deep Freezer of nominal capacity 500 Liters (Voltas Model CVF500DD / CF HT 500 DD / Western Model WHF 525H or approved equivalent make). Outer cabinet fabricated from heavy-duty UV-grade corrosion-resistant pre-painted galvanized steel (PPGS) sheet, pre-insulated with 60 mm thick high-density CFC-free Polyurethane Foam (PUFF) insulation, and inner liner made of stucco embossed aluminum sheet for enhanced hygiene and thermal transfer. Fitted with 2 (two) nos. heavy-duty hard-top counterbalanced spring-loaded insulated flip-up lids with integrated handle and lock-and-key safety facility. Equipped with high-efficiency energy-saving hermetic compressor unit operating on eco-friendly refrigerant gas (R134a / R290), heavy-duty copper tubing evaporator & condenser coil, digital LED temperature indicator / mechanical thermostat, removable wire storage baskets (min. 2 nos.), and heavy-duty caster wheels for easy mobility. Complete including cost of unit, conveyance, transit insurance, loading, unloading, statutory taxes, GST, labor, labor cess, tools & plants (T&P), initial pull-down testing, and commissioning in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 148 | SINGLE DOOR VISI COOLERSupplying, fitting, fixing, testing, and commissioning in position commercial Single Door Visi Cooler / Glass Door Display Refrigerator of nominal capacity 500 Liters (Voltas / Western or approved equivalent make). Outer cabinet fabricated from heavy-duty corrosion-resistant pre-painted steel sheet, pre-insulated with high-density CFC-free Polyurethane Foam (PUFF) insulation, and inner liner made of food-grade pre-coated galvanized steel or high-impact molded plastic. Fitted with 1 (one) no. self-closing double-glazed tempered glass door with transparent thermal insulation, integrated handle, and lock-and-key safety facility. Equipped with a dynamic fan-forced cooling system, tropicalized hermetic compressor unit operating on eco-friendly refrigerant gas (R134a / R290), copper-tubing evaporator and condenser coils, digital temperature controller / adjustable mechanical thermostat, vertical interior LED illumination, heavy-duty adjustable PVC-coated wire storage shelves (min. 4 nos.), and heavy-duty caster wheels for mobility. Complete including cost of unit, conveyance, transit insurance, loading, unloading, statutory taxes, GST, labor, labor cess, tools & plants (T&P), initial testing, and commissioning in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 149 | TRIPLE DOOR UNDER COUNTER FREEZER WITH TOP G.N. PANSupplying, fitting, fixing, testing, and commissioning in position commercial Triple Door Under-Counter Refrigerated Freezer Unit with Top Gastronorm (GN) Pan Cutouts of overall size 1500 mm (Length) x 700 mm (Width) x 850 mm (Working Height) + 150 mm (Rear Splash Back). Main structural frame constructed with 40 x 40 x 5 mm thick Mild Steel (M.S.) angle framework treated with anti-corrosive rust-proof paint. Top deck constructed with 16 S.W.G. (1.6 mm thick) Stainless Steel sheet with precision-cut openings to accommodate heavy-duty Stainless Steel GN pans. Outer cabinet body clad with 20 S.W.G. (0.9 mm thick) Stainless Steel sheet, and inner cabinet storage tank lined with 22 / 24 S.W.G. (0.8 mm / 0.6 mm thick) Stainless Steel sheet. Thermally insulated throughout the cabinet body and doors using high-density Polyurethane Foam (PUFF) insulation. Equipped with 3 (three) self-closing spring-hinged SS doors with lock-and-key facility, magnetic gaskets, and internal adjustable SS wire grid shelves. Includes a full set of food-grade heavy-duty Stainless Steel GN pans with matching SS lids. Refrigeration system featuring direct cooling with internal heavy-duty copper pipe evaporator coiling, high-efficiency sealed commercial compressor unit, heavy-duty air-cooled condenser unit with copper tubing, condenser fan motor, digital temperature controller with LED display, and ON/OFF power switch. Legs fabricated from 40 mm x 40 mm SS square pipe fitted with heavy-duty adjustable fiber feet. Complete including cost, conveyance, loading, unloading, transit insurance, statutory taxes, GST, labor, labor cess, tools & plants (T&P), testing, and commissioning in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 150 | TABLE WITH SINK & ONE BOTTOM SHELFSupplying, fitting, fixing, testing, and commissioning in position heavy-duty Stainless Steel Work Table with Integrated Sink Bowl and 1 (one) bottom undershelf of overall size 1500 mm (Length) x 700 mm (Width) x 850 mm (Working Height) + 150 mm (Rear Splash Back). Table top deck under-reinforced with a rigid 40 x 40 x 5 mm thick Mild Steel (M.S.) angle framework coated with anti-corrosive rust-proof paint. Working top surface and integrally fabricated/seamlessly welded sink bowl constructed from 16 S.W.G. (1.6 mm thick) Stainless Steel Grade 304 quality sheet, and 1 no. bottom undershelf covered with 18 / 20 S.W.G. (1.2 mm / 0.9 mm thick) SS 304 quality sheet. Leg supports fabricated from 40 mm x 40 mm SS 304 quality square pipes fitted with heavy-duty adjustable fiber/nylon bullet feet. Complete with brass chrome-plated swivelling gooseneck sink pillar cock, SS waste coupling, strainer grid, and PVC flexible drain pipe extension. Complete including cost, conveyance, transit insurance, loading, unloading, statutory taxes, GST, labor, labor cess, and tools & plants (T&P) required for the work complete in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 151 | WET GRINDERSupplying, fitting, fixing, testing, and commissioning in position commercial Tilting / Table-Top Wet Grinder of minimum 5 kg per batch (charge) batter capacity. Outer body enclosure clad with food-grade Stainless Steel (SS 304/202 grade) sheet and sturdy cast-iron/MS base frame. Grinding assembly comprising a heavy-duty detachable SS 304 drum with dual cylindrical granite roller stones mounted on a stainless steel center shaft. Drive mechanism powered by a 0.5 HP heavy-duty continuous-rated single-phase 220V/50Hz electric motor with high-torque gear/belt reduction drive system and overload protection. Equipped with tilting mechanism with lock/latch for easy batter discharge and drum cleaning. Complete with SS drum coverlid, starter ON/OFF switch, 3-core power cable with plug, and adjustable vibration-dampening leveling feet. Complete including cost of unit, conveyance, transit insurance, loading, unloading, statutory taxes, GST, labor, labor cess, tools & plants (T&P), trial run, testing, and commissioning in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 152 | SANDWICH GRILLERSupplying, fitting, fixing, testing, and commissioning in position commercial Electric Standard Sandwich Griller / Contact Grill. Outer housing body fabricated from food-grade Stainless Steel (SS 304/202 grade) with satin finish. Heavy-duty top and bottom ribbed grooved heating plates constructed from high-grade die-cast aluminum / heavy-duty cast iron coated with non-stick food-safe Teflon coating. Top pressing plate fitted with counterbalanced spring-loaded insulated handle for variable sandwich thickness adjustment. Heating mechanism powered by high-efficiency tubular heating elements, precision capillary thermostat temperature range), neon power/heating status indicator lamps, and removable stainless steel crumb/drip collection tray. Complete with heavy-duty 3-core power cord, 16A moulded plug, and anti-skid rubber feet. Complete including cost of unit, conveyance, transit insurance, loading, unloading, statutory taxes, GST, labor, labor cess, tools & plants (T&P), trial run, testing, and commissioning in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 153 | MICROWAVE OVENSupplying, fitting, fixing, testing, and commissioning in position commercial / heavy-duty Standard Microwave Oven of minimum 25 to 30 Liters cavity capacity (LG / Samsung / Panasonic / IFB or approved equivalent make). Outer body fabricated from powder-coated steel / brushed Stainless Steel sheet. Internal cooking cavity constructed from high-grade easy-clean Stainless Steel / anti-bacterial ceramic enamel coating. Fitted with heavy-duty glass turntable tray assembly or flatbed ceramic base, interior oven lighting, and touch-membrane digital control panel with LED display. Features multiple power output levels, auto-defrost by weight/time, pre-set cooking programs, digital timer, child-lock function, and end-of-cycle alarm signal. Powered by high-efficiency commercial magnetron assembly rated for minimum 900W to 1100W microwave output power operating on single-phase 230V/50Hz power supply. Complete with heavy-duty 3-core power cord, 16A moulded plug, and anti-skid feet. Complete including cost of unit, conveyance, transit insurance, loading, unloading, statutory taxes, GST, labor, labor cess, tools & plants (T&P), trial run, testing, and commissioning in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 154 | DISH & POT WASHING AREA:-3-SINK UNIT FOR PLATE WASHINGSupplying, fitting, fixing, testing, and commissioning in position heavy-duty Stainless Steel 3-Sink Unit for Commercial Dish, Plate, and Pot Washing of overall size 1650 mm (Length) x 600 mm (Width) x 850 mm (Working Height) + 150 mm (Rear Splash Back). Table top deck under-reinforced with a rigid 40 x 40 x 5 mm thick Mild Steel (M.S.) angle framework coated with anti-corrosive rust-proof paint. Top deck surface and 3 (three) integrally fabricated/seamlessly welded sink bowls constructed from 16 S.W.G. (1.6 mm thick) Stainless Steel (SS 304/202 grade) sheet. Front vertical elevation clad down to the sink bowl depth with 20 S.W.G. (0.9 mm thick) Stainless Steel apron sheet to conceal sink bowls and plumbing lines. Leg supports fabricated from 40 mm x 40 mm SS square pipes fitted with heavy-duty adjustable fiber/nylon bullet feet. Complete with brass chrome-plated swivelling gooseneck sink pillar cocks (3 nos.), SS waste couplings with strainer grids (3 nos.), and PVC flexible drain pipe extensions. Complete including cost, conveyance, transit insurance, loading, unloading, statutory taxes, GST, labor, labor cess, and tools & plants (T&P) required for the work complete in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 155 | 4”- DEEP SOIL DISH LANDING TABLE WITH SOIL HOLE & OVER HEAD SHELVESupplying, fitting, and fixing in position heavy-duty Stainless Steel Soiled Dish Landing Table with integrated 4\\" deep soil trough, scrap hole, and single-tier overhead shelf of overall size 1100 mm (Length) x 700 mm (Width) x 850 mm (Working Height) + 450 mm (Overhead Shelf Height) + 300 mm (Rear Splash Back). Working top deck under-reinforced with a rigid 40 x 40 x 5 mm thick Mild Steel (M.S.) angle framework coated with anti-corrosive rust-proof paint. Table top deck and 4\\" (100 mm) deep depressed landing trough constructed from 16 S.W.G. (1.6 mm thick) Stainless Steel Grade 304 quality sheet, equipped with a 150 mm diameter waste scrap hole fitted with a heavy-duty rubber scraper ring. Single-tier overhead shelf constructed from 18 S.W.G. (1.2 mm thick) SS 304 quality sheet, mounted on vertical tubular legs fabricated from 25 mm diameter SS 304 circular pipe. Main table leg supports fabricated from 40 mm x 40 mm SS 304 square pipe fitted with heavy-duty adjustable fiber/nylon bullet feet. Complete including cost, conveyance, transit insurance, loading, unloading, statutory taxes, GST, labor, labor cess, and tools & plants (T&P) required for the work complete in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 156 | INDUSTRIAL DISH WASHER MACHINE WITH INSTALLATION (IFB or similar Make)Supplying, fitting, fixing, testing, and commissioning in position commercial Hood-Type / Pass-Through Industrial Dish & Glass Washer Machine (Model No. P-805 or approved equivalent make) of overall size 640 mm (Length) x 740 mm (Width) x 1480 mm (Height) designed for $500 \times 500\text{ mm}$ standard rack/basket sizes. Constructed with a heavy-duty food-grade Stainless Steel (SS 304) body structure, deep-drawn wash tank with rounded corners, and counterbalanced hood-lifting mechanism. Features automatic electromechanical control panel with multiple wash cycles, producing a maximum washing capacity of 60 trays/baskets per hour (accommodating up to 18 plates per tray, yielding approximately 800–1000 plates per hour) via individual rack feed. System complete with built-in stainless steel wash/rinse arms (top and bottom), electric booster water heater, high-efficiency wash pump, safety door interlock, thermostats, water inlet solenoid valves, drain pump assembly, standard plate basket (1 no.), flat wire cup basket (1 no.), and cutlery holder. Complete including cost of machine, conveyance, transit insurance, loading, unloading, electrical wiring connections, plumbing inlet/outlet hooks, statutory taxes, GST, labor, labor cess, tools & plants (T&P), trial load testing, and commissioning in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 157 | SOIL DISH COLLECTION TROLLEY WITH 01NO. BOTTOM SHELVESupplying, fitting, and fixing in position heavy-duty Stainless Steel Soiled Dish Collection / Clearing Trolley of overall size 900 mm (Length) x 600 mm (Width) x 900 mm (Height) equipped with 1 (one) bottom undershelf. Top recessed collection tray deck and bottom undershelf fabricated from 16 / 18 S.W.G. (1.6 mm / 1.2 mm thick) Stainless Steel Grade 304 quality sheet with raised anti-drip perimeter edges/flanges. Push/pull handle fabricated from 40 mm outer diameter SS 304 circular pipe. Main load-bearing leg framework supported on 4 (four) nos. heavy-duty non-marking swivel caster wheels (min. 100 mm to 125 mm diameter, 2 nos. fitted with total-lock foot brakes). Complete including cost, conveyance, loading, unloading, transit insurance, statutory taxes, GST, labor, labor cess, and tools & plants (T&P) required for the work complete in all respects as per detailed specification and direction of the Engineer-in-Charge |
| 158 | CLEAN DISH RACK WITH 04NOS. SHELVESupplying, fitting, and fixing in position heavy-duty Stainless Steel Clean Dish Rack Unit of overall size 1100 mm (Length) x 450 mm (Width) x 1650 mm (Height) equipped with 4 (four) tier storage shelves. Shelves fabricated from 18 S.W.G. (1.2 mm thick) Stainless Steel Grade 304 quality sheet, under-reinforced with SS channel stiffeners to handle heavy crockery loads. Main supporting leg framework fabricated from 40 mm x 40 mm Stainless Steel Grade 304 quality square pipes fitted at the base with heavy-duty adjustable fiber/nylon bullet feet. Complete including cost, conveyance, loading, unloading, transit insurance, statutory taxes, GST, labor, labor cess, and tools & plants (T&P) required for the work complete in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 159 | STORAGE RACK & OTHERS:-S.S. STORAGE RACK WITH 04NOS. SHELVE FOR DRY STORESupplying, fitting, and fixing in position heavy-duty Commercial Storage Rack for Dry Store Room of overall size 1100 mm (Length) x 450 mm (Width) x 1650 mm (Height) equipped with 4 (four) tier storage shelves. Storage shelves fabricated from 18 S.W.G. (1.2 mm thick) Mild Steel (M.S.) sheet treated with anti-corrosive rust-proof primer and industrial-grade powder coating/paint finish, under-reinforced with steel stiffener channels. Vertical supporting leg framework fabricated from Stainless Steel (S.S.) square pipes fitted at the base with heavy-duty adjustable fiber/nylon bullet feet. Complete including cost, conveyance, loading, unloading, transit insurance, statutory taxes, GST, labor, labor cess, and tools & plants (T&P) required for the work complete in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 160 | S.S. STORAGE RACK WITH 04NOS. SHELVE FOR DRY STORESupplying, fitting, and fixing in position heavy-duty Commercial Storage Rack for Dry Store Room of overall size 1500 mm (Length) x 450 mm (Width) x 1650 mm (Height) equipped with 4 (four) tier storage shelves. Storage shelves fabricated from 18 S.W.G. (1.2 mm thick) Mild Steel (M.S.) sheet treated with anti-corrosive rust-proof primer and industrial-grade powder coating/paint finish, under-reinforced with steel stiffener channels. Vertical supporting leg framework fabricated from Stainless Steel (S.S.) square pipes fitted at the base with heavy-duty adjustable fiber/nylon bullet feet. Complete including cost, conveyance, loading, unloading, transit insurance, statutory taxes, GST, labor, labor cess, and tools & plants (T&P) required for the work complete in all respects as per detailed specification and direction of the Engineer-in-Charge |
| 161 | VENTILATION SYSTEM:-S.S. SUCTION HOOD WITH S.S. BAFFLE FILTER FOR COOKING RANGE TOP (CANTILEVER TYPE)Supplying, fitting, fixing, testing, and commissioning in position commercial Cantilever Wall-Mounted / Island Type Overhead Stainless Steel Exhaust Suction Hood of overall size 6600 mm (Length) x 900 mm (Width) x 450 mm (Height) positioned over cooking range. Main hood body canopy fabricated from 20 / 22 S.W.G. (0.9 mm / 0.8 mm thick) Stainless Steel Grade 202 quality sheet with smooth satin finish, internal grease/oil drip gutter channel, and drain plug outlet. Fitted with removable heavy-duty Stainless Steel Baffle Filters with double outer/inner frame assembly fabricated from 24 S.W.G. (0.6 mm thick) Stainless Steel sheet for efficient grease extraction and fire barrier. Complete with overhead duct collar spigot connection openings, internal structural stiffeners, wall mounting/ceiling suspension stay rods, fasteners, and anchor bolts. Complete including cost, conveyance, loading, unloading, transit insurance, statutory taxes, GST, labor, labor cess, tools & plants (T&P), scaffolding, mounting, and commissioning complete in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 162 | AIR CONTROL DAMPER Supplying, fitting, fixing, testing, and balancing in position Volume Control Air Control Damper (VCD) of overall size 300 mm x 300 mm x 100 mm depth. Outer casing frame and adjustable damper blades fabricated from 24 S.W.G. (0.63 mm thick) prime Galvanized Iron (G.I.) sheet with zinc coating of minimum 120 gsm. Fitted with opposing/parallel blade mechanism, brass/nylon bush bearings, solid steel linkage spindles, and manual quadrant control handle with position indicator locking arrangement. Complete with flange connections on both ends for integration into ducting, neoprene gaskets, self-tapping screws/bolts, sealing compounds, balancing, labor, labor cess, statutory taxes, GST, conveyance, tools & plants (T&P) complete in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 163 | 03 NEW G.I. DUCTING INSIDE & OUT-SIDE KITCHEN FOR EXHAUST SYSTEMSupplying, fitting, fixing, testing, and commissioning in position Galvanized Iron (G.I.) Sheet Rectangular Air Ducting for kitchen exhaust system running inside and outside the kitchen premises, fabricated in various overall cross-sectional sizes. Constructed from prime quality 22 S.W.G. (0.80 mm thick) and 24 S.W.G. (0.63 mm thick) G.I. sheet (Class VIII zinc coating minimum 120 gsm). Duct sections fabricated with cross-broken/beaded stiffened panels, transverse M.S./G.I. companion angle flanges or drive-cleat slip joints, neoprene/rubber gasket seals, and galvanized nuts, bolts, and self-tapping screws. Complete with internal and external support system comprising M.S. angle hangers, threaded drop rods, expansion anchor fasteners, wall brackets, anti-corrosive primer/paint on structural supports, weather-proof silicone sealant at exterior roof/wall penetrations, labor, labor cess, statutory taxes, GST, freight, scaffolding, tools & plants (T&P), testing, and air balancing complete in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 164 | Supplying, fitting, fixing, testing, and commissioning in position heavy-duty Industrial/Commercial Centrifugal Exhaust Fan unit powered by a 5 HP (3.7 kW), 3-Phase, 415V, 50 Hz, 1440/2880 RPM continuous TEFC induction motor (IP-55 protection, Class F insulation). Casing constructed from heavy-gauge prime Mild Steel (M.S.) sheet with anti-corrosive epoxy/polyurethane paint coating, scroll housing with inspection door, drain plug, and forward/backward curved statically and dynamically balanced B.I./G.I. impeller. Belt-driven / direct-driven power transmission complete with pulleys, V-belts, adjustable motor base, and protective belt guard. Fitted with heavy-duty M.S. channel base frame mounted on anti-vibration spring/rubber isolators, fire-retardant canvas/PVC flexible duct connectors on suction and discharge flanges, DOL/Star-Delta starter with thermal overload relay, earthing terminals, labor, labor cess, statutory taxes, GST, freight, tools & plants (T&P), testing, and air volume balancing complete in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 165 | AIR ADJUSTABLE LUBBER AT AIR OUTLET POINTSupplying, fitting, fixing, testing, and air balancing in position Air Adjustable Louver / Grille (Supply / Exhaust Air Outlet) of overall size 18 inches x 8 inches. Outer perimeter frame enclosure and individually adjustable air deflector blades fabricated from 24 S.W.G. (0.63 mm thick) prime Galvanized Iron (G.I.) sheet with zinc coating of minimum 120 gsm, treated with anti-corrosive primer and powder-coated/painted finish. Fitted with manual blade-adjustment linkage mechanism / damper key arrangement for horizontal and vertical directional airflow control. Complete with mounting collar frame, foam gasket seals, concealed fixing screws, labor, labor cess, statutory taxes, GST, conveyance, tools & plants (T&P), testing, and air volume balancing complete in all respects as per detailed specification and direction of the Engineer-in-Charge |
| 166 | Supplying, fitting, fixing, testing, and commissioning in position heavy-duty Industrial/Commercial Inline Axial Flow Fan unit powered by a 2 HP (1.5 kW), 3-Phase / 1-Phase, 415V / 230V, 50 Hz, 1440/2880 RPM continuous TEFC induction motor (IP-55 protection, Class F insulation). Cylindrical fan casing constructed from heavy-gauge prime Mild Steel (M.S.) sheet / Cast Aluminum casing with aerodynamic guide vanes and internal motor bracket assembly. Fitted with aerodynamically designed, statically and dynamically balanced cast aluminum / die-cast polypropylated blades with adjustable pitch impeller. Belt-driven or direct-driven execution complete with anti-vibration rubber mounts/hangers, fire-retardant flexible duct connectors on suction and discharge flanges, Direct-On-Line (DOL) starter with thermal overload protection, earth bonding terminals, labor, labor cess, statutory taxes, GST, freight, tools & plants (T&P), testing, and air balancing complete in all respects as per detailed specification and direction of the Engineer-in-Charge. |
| 167 | Supplying, fitting, fixing, testing, and commissioning in position heavy-duty Commercial LPG Gas Cylinder Manifold Header System designed for a total capacity of 20 Nos. Cylinders arranged in a 5 x 2 dual-bank configuration (10 cylinders on active bank + 10 cylinders on reserve bank). Main manifold header headers fabricated from 25 mm Nominal Bore (25 N.B. / 1\\" NB) Schedule 40 seamless Mild Steel (M.S.) pipe conforming to IS: 1239 / ASTM A106 Grade B. System complete with 20 Nos. flexible high-pressure copper/SS braided pigtails with brass adaptors, 20 Nos. brass needle/cylinder isolation valves, 20 Nos. brass non-return valves (NRVs) at each arm connection, dual-bank main isolation ball valves, auto/manual changeover valve assembly, primary stage high-pressure regulator, safety relief valve (SRV), digital/analog pressure gauges, M.S. wall mounting brackets/frames with anti-corrosive primer and yellow safety enamel paint finish. Complete including cost of pipe, valves, fittings, pneumatic nitrogen/hydraulic pressure leak testing, conveyance, loading, unloading, transit insurance, statutory taxes, GST, labor, labor cess, tools & plants (T&P) complete in all respects as per detailed specification, gas safety codes (IS: 6044), and direction of the Engineer-in-Charge. |
| 168 | Supplying, fitting, fixing, testing, and commissioning in position heavy-duty High-Pressure Non-Return Valve (NRV) / Check Valve for commercial LPG gas system (H.P.C. / Gaso or approved equivalent make). Constructed from forged brass / forged stainless steel body with spring-loaded Teflon/Viton disk seat seal, rated for high-pressure gas service (working pressure up to. Designed for zero-backflow operation on individual cylinder manifold take-off arms / gas header pipe branches to prevent gas reversal during cylinder changeover. Complete with threaded/flanged companion end connections, high-pressure Teflon thread sealing tape/liquid thread sealant, pneumatic nitrogen pressure leak testing, labor, labor cess, statutory taxes, GST, conveyance, freight, tools & plants (T&P) complete in all respects as per detailed specification, gas safety codes (IS: 6044), and direction of the Engineer-in-Charge |
| 169 | Supplying, fitting, fixing, testing, and commissioning in position high-pressure LPG Cylinder Flexible Pigtail Hose of overall length 24 inches of approved make (Super Seal / Suraksha or approved equivalent make). Constructed with high-tensile Stainless Steel (SS 304) wire braid outer armor over synthetic rubber hose core / annealed copper pigtail pipe designed for high-pressure LPG vapor service. Fitted at both ends with heavy-duty forged brass POL connectors / nuts and end adapters suitable for direct connection between LPG cylinders and manifold header non-return valves (NRVs). Complete with fuel-resistant rubber O-rings/washers, pneumatic nitrogen pressure leak testing, labor, labor cess, statutory taxes, GST, conveyance, freight, tools & plants (T&P) complete in all respects as per detailed specification, gas safety codes (IS: 6044 / IS: 9573), and direction of the Engineer-in-Charge. |
| 170 | Supplying, fitting, fixing, testing, and commissioning in position heavy-duty Click-On Adapter / Quick Connect Gas Adapter (Gaso or approved equivalent make) designed for valve commercial/domestic LPG cylinders. Constructed with a forged brass body, corrosion-resistant internal stainless steel locking ball mechanisms, dual-stage safety locking ring, and integrated gas shut-off valve. Rated for high-pressure/low-pressure vapor service with zero-leakage nitrile/viton rubber seal rings. Complete with standard threaded/barbed outlet nozzle connections, flexible hose mounting clips, pneumatic nitrogen pressure leak testing, labor, labor cess, statutory taxes, GST, conveyance, freight, tools & plants (T&P) complete in all respects as per detailed specification, gas safety codes (IS: 6044 / IS: 8737), and direction of the Engineer-in-Charge |
| 171 | Supplying, fitting, fixing, testing, and commissioning in position heavy-duty High-Pressure 1st Stage LPG Pressure Regulator preset at 30 PSI outlet delivery pressure of approved make (Vanaz / Gaso or approved equivalent make). Constructed from die-cast aluminum / forged brass body with high-grade synthetic rubber diaphragm, stainless steel internal spring, and built-in over-pressure slam-shut safety mechanism / pressure relief valve. Designed to reduce high cylinder bank pressure down to a stable 30 PSI intermediate pressure for high-pressure distribution piping. Complete with NPT / BSP threaded inlet and outlet connections, pressure gauge port with glycerine-filled pressure gauge, isolation cock, Teflon thread seals, pneumatic nitrogen pressure leak testing, labor, labor cess, statutory taxes, GST, conveyance, freight, tools & plants (T&P) complete in all respects as per detailed specification, gas safety codes (IS: 6044 / IS: 6901), and direction of the Engineer-in-Charge. |
| 172 | HAND SHUT-OFF VALVESupplying, fitting, fixing, testing, and commissioning in position heavy-duty 25 mm Nominal Bore Manual Hand Shut-Off Valve / High-Pressure Gas Ball Valve of approved make (RV / Koria / Acron or approved equivalent make). Constructed with forged brass / cast steel body, chrome-plated solid brass/SS ball, blow-out proof stem, and fire-safe PTFE/Teflon seats designed specifically for high-pressure LPG/PNG vapor service . Fitted with a quarter-turn heavy-duty lever handle with yellow PVC insulation sleeve and position indicator (\\"OPEN/CLOSE\\"). Complete with 25 mm BSP/NPT threaded or flanged companion end connections, high-pressure sealant/gaskets, pneumatic nitrogen pressure leak testing, labor, labor cess, statutory taxes, GST, conveyance, freight, tools & plants (T&P) complete in all respects as per detailed specification, gas safety codes (IS: 6044 / BS EN 331), and direction of the Engineer-in-Charge. |
| 173 | HAND SHUT-OFF VALVESupplying, fitting, fixing, testing, and commissioning in position heavy-duty 20 mm Nominal Bore Manual Hand Shut-Off Valve / High-Pressure Gas Ball Valve of approved make (RV / Koria / Acron or approved equivalent make). Constructed with forged brass / cast steel body, chrome-plated solid brass/SS ball, blow-out proof stem, and fire-safe PTFE/Teflon seats designed specifically for high-pressure/low-pressure LPG/PNG vapor service (working pressure up to. Fitted with a quarter-turn heavy-duty lever handle with yellow PVC insulation sleeve and position indicator (\\"OPEN/CLOSE\\"). Complete with 20 mm BSP/NPT threaded or flanged companion end connections, high-pressure sealant/gaskets, pneumatic nitrogen pressure leak testing, labor, labor cess, statutory taxes, GST, conveyance, freight, tools & plants (T&P) complete in all respects as per detailed specification, gas safety codes (IS: 6044 / BS EN 331), and direction of the Engineer-in-Charge |
| 174 | M.S. PIPE LINE Supplying, fitting, fixing, testing, and commissioning in position 25 mm Nominal Bore outer diameter) heavy-duty Seamless Schedule 40 Mild Steel (M.S.) pipe for commercial LPG/PNG gas distribution pipeline network, conforming to IS: 1239 (Part-1 Heavy Grade) / ASTM A106 Grade B. Complete with heavy-duty forged steel / M.S. Schedule 40 fittings including equal/unequal tees, equal/long radius elbows, sockets, unions, hex bushings, and companion flanges. Fitted and secured with heavy-duty M.S. wall clamps, anchor fasteners, structural steel brackets, and rubber isolation liners at regular intervals. All pipe joints shall be full-penetration TIG welded or high-pressure threaded with fuel-resistant Teflon sealant. Pipe surface thoroughly degreased, derusted, and coated with 2 coats of zinc-chromate anti-corrosive primer and 2 coats of Signal Yellow synthetic enamel paint finish as per code (IS: 2379). Complete including pneumatic nitrogen pressure leak testing, scaffolding, labor, labor cess, statutory taxes, GST, conveyance, freight, tools & plants (T&P) complete in all respects as per detailed specification, gas safety codes (IS: 6044), and direction of the Engineer-in-Charge. |
| 175 | M.S. PIPE LINE Supplying, fitting, fixing, testing, and commissioning in position 20 mm Nominal Bore outer diameter) heavy-duty Seamless Schedule 40 Mild Steel (M.S.) pipe for commercial LPG/PNG gas distribution pipeline network, conforming to IS: 1239 (Part-1 Heavy Grade) / ASTM A106 Grade B. Complete with heavy-duty forged steel / M.S. Schedule 40 fittings including equal/unequal tees, equal/long radius elbows, sockets, unions, hex bushings, and companion flanges. Fitted and secured with heavy-duty M.S. wall clamps, anchor fasteners, structural steel brackets, and rubber isolation liners at regular intervals. All pipe joints shall be full-penetration TIG welded or high-pressure threaded with fuel-resistant Teflon sealant. Pipe surface thoroughly degreased, derusted, and coated with 2 coats of zinc-chromate anti-corrosive primer and 2 coats of Signal Yellow synthetic enamel paint finish as per code (IS: 2379). Complete including pneumatic nitrogen pressure leak testing, scaffolding, labor, labor cess, statutory taxes, GST, conveyance, freight, tools & plants (T&P) complete in all respects as per detailed specification, gas safety codes (IS: 6044), and direction of the Engineer-in-Charge. |
| 176 | NEEDLE CONTROL VALVE Supplying, fitting, fixing, testing, and commissioning in position heavy-duty High-Pressure Needle Control Valve for commercial LPG gas system (H.P.C. / Gaso or approved equivalent make). Constructed from forged brass / forged stainless steel body with fine-threaded tapered spindle stem, PTFE/Viton gland packing, and ergonomically designed metallic handwheel/knob, rated for high-pressure gas service (working pressure up to. Designed for precise variable gas flow control and micro-throttling on individual burner branch lines or manifold take-offs. Complete with threaded companion end connections, high-pressure Teflon thread sealing tape/liquid thread sealant, pneumatic nitrogen pressure leak testing, labor, labor cess, statutory taxes, GST, conveyance, freight, tools & plants (T&P) complete in all respects as per detailed specification, gas safety codes (IS: 6044), and direction of the Engineer-in-Charge. |
| 177 | M.S. ADAPTORSupplying, fitting, fixing, testing, and commissioning in position heavy-duty Mild Steel (M.S.) / Forged Steel Threaded Adapters / Nipples of nominal sizes and Fabricated from Schedule 40 / Schedule 80 heavy-grade seamless M.S. pipe conforming to IS: 1239 (Part-1 Heavy Grade) / ASTM A106 Grade B or forged steel ASTM A105 (Class 3000). Machine-threaded male/female NPT / BSP threads designed specifically for high-pressure LPG/PNG gas pipeline transitions, equipment connections, and valve terminations. Complete with fuel-resistant PTFE thread seal tape / liquid thread sealant, 2 coats of zinc-chromate primer, 2 coats of Signal Yellow synthetic enamel paint finish, pneumatic nitrogen pressure leak testing, working pressure, labor, labor cess, statutory taxes, GST, conveyance, freight, tools & plants (T&P) complete in all respects as per detailed specification, gas safety codes (IS: 6044), and direction of the Engineer-in-Charge. |
| 178 | M.S. NUT & NIPPLE SET Supplying, fitting, fixing, testing, and commissioning in position heavy-duty Mild Steel (M.S.) / Forged Steel Union Nut and Nipple Sets of nominal sizes and Fabricated from Schedule 40 / Schedule 80 heavy-grade seamless M.S. pipe conforming to IS: 1239 (Part-1 Heavy Grade) / ASTM A106 Grade B or forged steel ASTM A105 (Class 3000). Machine-threaded male/female NPT/BSP union joint assembly with captive hexagonal swivel nut and precision-machined tailpiece nipple designed specifically for high-pressure LPG/PNG gas pipeline connections, meter stations, regulator hookups, and equipment isolations. Complete with fuel-resistant synthetic NBR/Viton/copper sealing gaskets, PTFE thread seal tape / liquid thread sealant, 2 coats of zinc-chromate primer, 2 coats of Signal Yellow synthetic enamel paint finish, pneumatic nitrogen pressure leak testing, labor, labor cess, statutory taxes, GST, conveyance, freight, tools & plants (T&P) complete in all respects as per detailed specification, gas safety codes (IS: 6044), and direction of the Engineer-in-Charge. |
| 179 | PRESSURE GAUGE WITH VALVESupplying, fitting, fixing, testing, and commissioning in position heavy-duty Industrial Pressure Gauge with measuring range of approved make (Fiebig / H. Guru / Wika / Waaree or approved equivalent). Dial size or enclosed in a Stainless Steel (SS 304) casing, glycerine-filled or dry execution, with shatterproof safety glass window, Phosphor Bronze / SS 316 Bourdon tube mechanism, and bottom connection NPT/BSP male thread. Complete with a matching high-pressure forged brass / SS 304 isolation needle valve or ball valve pressure class) for gauge isolation and calibration removal. Fitted on LPG main/sub-header pipeline using M.S./Forged Steel adapters, fuel-resistant Teflon sealing tape / liquid sealant, 2 coats of anti-corrosive primer and Signal Yellow enamel paint finish on pipe fittings. Complete including pneumatic nitrogen pressure leak testing working pressure, labor, labor cess, statutory taxes, GST, conveyance, freight, tools & plants (T&P) complete in all respects as per detailed specification, gas safety codes (IS: 3624 / IS: 6044), and direction of the Engineer-in-Charge. |
| 180 | OVEN PIPE / OVEN PIGTAIL Supplying, fitting, fixing, testing, and commissioning in position extra-long high-pressure flexible Oven Pipe / Oven Pigtail Hose of overall length 60 inches of approved make (Super Seal / Suraksha or approved equivalent make). Constructed with high-tensile Stainless Steel (SS 304) wire braid outer armor over synthetic nitrile rubber core / annealed copper pigtail pipe designed for high-temperature and high-pressure LPG/PNG vapor service (working pressure up to. Fitted at both ends with heavy-duty forged brass swivel end nuts, male/female thread adapters, and quick-connect union fittings suitable for direct flexible hookup between commercial kitchen main isolation valves and heavy-duty baking ovens, ranges, or cooking appliances. Complete with heat and fuel-resistant synthetic rubber washers/gaskets, pneumatic nitrogen pressure leak testing, labor, labor cess, statutory taxes, GST, conveyance, freight, tools & plants (T&P) complete in all respects as per detailed specification, gas safety codes (IS: 6044 / IS: 9573), and direction of the Engineer-in-Charge. |
| 181 | SPARK ARRESTOR FOR FIRE SAFETYSupplying, fitting, fixing, testing, and commissioning in position heavy-duty In-Line Flame / Spark Arrestor of approved make (Vanaz / Gaso or approved equivalent make). Constructed from heavy-duty forged brass / cast steel / stainless steel body containing a removable multi-layer crimped Stainless Steel (SS 316) wire mesh / corrugated ribbon flame quenching element designed to prevent flame propagation, flash back, and sparks within high-pressure/low-pressure LPG vapor pipelines (working pressure up to. Designed for zero flow restriction while providing maximum thermal quenching capacity. Complete with BSP / NPT female/male threaded or flanged companion end connections, high-pressure Teflon thread sealants / gas gaskets, 2 coats of zinc-chromate primer, 2 coats of Signal Yellow / Red safety enamel paint finish, pneumatic nitrogen pressure leak testing working pressure), labor, labor cess, statutory taxes, GST, conveyance, freight, tools & plants (T&P) complete in all respects as per detailed specification, gas safety codes (IS: 6044 / BS EN ISO 16852), and direction of the Engineer-in-Charge. |
| 182 | GAS LEAKAGE DETECTOR Supplying, fitting, fixing, testing, and commissioning in position high-sensitivity Microprocessor-Based Gas Leakage Detector / Gas Alarm Sensor Unit (Model: GT-07 Victory Gas Alarm Company or approved equivalent make) for commercial LPG/PNG gas manifold and kitchen installation. Constructed with a flame-retardant ABS enclosure housing a catalytic bead / catalytic combustion type gas sensor calibrated specifically for LPG (Propane/Butane) and Natural Gas detection at Lower Explosive Limit (LEL). Features dual visual status indicators (Normal Green LED / Alarm Red LED), built-in piezoceramic audio buzzer and potential-free relay contacts to automatically trigger external solenoid shut-off valves, exhaust blowers, and central fire alarm control panels upon gas leak detection. Complete with 230V AC power supply input, mounting base plate, wall plugs, signal wiring up to local control interface, functional gas response calibration testing, labor, labor cess, statutory taxes, GST, conveyance, freight, tools & plants (T&P) complete in all respects as per detailed specification, gas safety codes (IS: 6044 / IS: 2189), and direction of the Engineer-in-Charge. |
| 183 | PRESSURE TESTING & INSTALLATION CHARGE Carrying out high-pressure pneumatic testing, leak detection, strength testing, and nitrogen purging of the complete installed commercial LPG/PNG gas distribution pipeline network, manifold bank, isolation valves, regulators, and flexible equipment drop lines using High-Purity Dry Nitrogen gas. The operation includes supplying pressurized Nitrogen gas cylinders, pressure reduction testing manifold, calibrated master pressure gauges, temporary end caps/plugs, test connections, and safety relief valves. The system shall be pressurized in steps up to the maximum working operating pressure or high-pressure lines and for low-pressure lines) and held for a continuous duration of not less than 4 to 24 hours as directed. Includes 100% soap-bubble / foam leak inspection across all welded, threaded, flanged, and mechanical joints, recording initial/final temperature-corrected pressure logs, depressurization, and final nitrogen blanket purging complete with all labor, technical supervision, labor cess, statutory taxes, GST, conveyance, freight, tools & plants (T&P) complete in all respects as per detailed specification, gas safety codes (IS: 6044 / OESD-144), and direction of the Engineer-in-Charge. |
| 184 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS:15778 having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and testing of Joints ncluding all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge.20mm dia CPVC Pipe |
| 185 | 25mm dia CPVC Pipe |
| 186 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor ncluding all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. 25 mm dia UPVC ( Sch-80) pipes |
| 187 | 32mm dia UPVC ( Sch-80) pipes |
| 188 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.250mm 250 mm thick wall |
| 189 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing GI pipes / PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof ncluding all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 190 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 191 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.15mm dia long body Bib Cock including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 192 | 20mm dia CP concealed stop cock |
| 193 | 15mm dia CP angle stop cock |
| 194 | 15mm dia CP Pillar cock |
| 195 | 15mm dia CP Health faucet. |
| 196 | 15mm dia Two way Bib Cock |
| 197 | Over head shower 100mm dia round |
| 198 | 15mm dia long body Sink cock |
| 199 | glass shelf |
| 200 | 25mm dia brass or gun metal full way valve |
| 201 | 32mm dia brass or gun metal full way valve |
| 202 | 40mm dia brass or gun metal full way valve |
| 203 | 50mm dia brass or gun metal full way valve |
| 204 | 15mm dia CP Flange |
| 205 | 15mm dia CP Extention |
| 206 | 125mm CP grating |
| 207 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches ncluding all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge.110mm dia U-PVC SWR pipe |
| 208 | 75 mm dia UPVC SWR Pipe |
| 209 | 110mm U-PVC Plain tee |
| 210 | 110mm U-PVC Y with door |
| 211 | 110mm U-PVC door bend |
| 212 | 110mm U-PVC plain bend |
| 213 | 110mm dia U-PVC 'P' trap |
| 214 | 110mm dia U-PVC Plain 87.5 Bend |
| 215 | 110mm dia U-PVC offset with out ear |
| 216 | 110mm dia U-PVC cowl |
| 217 | 75 mm dia UPVC plain bend Pipe |
| 218 | 75 mm dia UPVC plain Tee Pipe |
| 219 | Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge.250mm to 375mm thick wall |
| 220 | Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 221 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge. European water closet with ‘S’ trap plain E.W.C. with seat cover including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 222 | Supplying all materials , labour, T&P and fixing Vitreous china water closet ,squatting pan ( Indian type W.C. pan / Orissa pattern squatting pan ) duly embedded in cement concrete 1:5:10 using hard granite metal 4cm nominal size including fixing a pair of vitreous china 250mmx130mmx30mm foot rest, fixing 100mm dia hci 'P' or 'S' trap for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc. including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge.580mmx440mm size Orissa pan |
| 223 | Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge.10 litres capacity pvc low level cistern with 32mm dia CP long flush bend |
| 224 | Supplying all materials,labour, T&P and fixing laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs,screws and cement etc including cutting holes in walls and making good the damages including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge.600x450x250 mm stainless steel kitchen sink-glossy-IS:13983 - 1994 |
| 225 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks (Plaza make)and supply mains for wash basin, fixing 32mm dia CP brass waste, etc including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge.550mmx400mm W.H.basin with porcelain pedestal |
| 226 | Under Counter Basin (560x455) |
| 227 | Half pedestal Basin |
| 228 | Supplying all materials, labour, T&P and fixing bowl pattern urinal conforming to IS:771-part-3-1985 of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement ncluding all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. Half stall urinal |
| 229 | 15mm dia urinal spreader |
| 230 | 32mm dia C.P. dome waste |
| 231 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge.Design Mirror |
| 232 | Supplying all materials, labour, T&P and fixing standard size glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge.600mmx125mm glass shelf with CP/NP guard rails |
| 233 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws ncluding all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge.Towel Ring Round - |
| 234 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws ncluding all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge.25mm x 600mm long CP towel rail |
| 235 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws ncluding all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge.25mm x 600mm long CP towel rail CP soap holder |
| 236 | Supplying all materials, labour, T&P and providing cement concrete (1:2;4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.CGround floor. |
| 237 | First floor. |
| 238 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge Ground floor. |
| 239 | First floor. |
| 240 | Providing and installing two component acrylic modified cementitious waterproofing coating with Masterseal 551 /Equivalent over roof slab after carrying out pond test on roof slab, filling all defects, saturating the surface, mixing the products and then application in 2.0 mm thickness (1.8 Kg / sqm coverage rate for 1.0 mm thickness) in suitable layers complete in all respect, all materials, tools, plant & labour complete in all respect. Density 1850kg/m³ , Mix ratio (Powder to liquid) 3:1 by weight ,Water penetration Din 1048 1.5 Bar no leakage Potlife @ 25°C 2 hours & @ 40°C 30 minutes, Recoatable: 8-12 hours Elongation >42% (air) & >31% (under water),Tensile strength >20 kg/cm2 ,VOC content (HK prod code P10-17) 0.5 g/Lncluding all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge.First floor. |
| 241 | Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc. complete as per direction of the Engineer in charge. (Ceramic floor tiles of premium grade Kajaria / Somany make of size 60cm x 60cm including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge.Ground floor. |
| 242 | First floor. |
| 243 | Fixing tiles (Ceramic Wall Tile) in dadoo, skirting and rises of steps on12 mm thick cement plaster in mortar 1:3 (1 cement: 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. Ground floor. |
| 244 | First floor. |
| 245 | Supplying all materials, labour, T&P and fixing Granite tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles ncluding all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. Ground floor |
| 246 | First floor. |
| 247 | Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge. |
| 248 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. |
| 249 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard or similar make) Pure Chill 120 PSS RO+UV of size 750x570x1350mm height with water storage capacity 80 liters along with 2 nos of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.Aquaguard 120 PSS RO+UV |
| 250 | Supplying all materials,labour,T&P and laying in trenches ( to level or slope ) unplasticized PVC pipe conforming to IS:4985/2000 of the following outside dia for class-3 (0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/ as per manufactures's providing and laying in trench cement concrete(1:4:8) with 40 mm size hard granite metal in the Type-C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge.110mm dia U-PVC pipe |
| 251 | Supplying all materials,labour,T&P and laying in trenches ( to level or slope ) unplasticized PVC pipe conforming to IS:4985/2000 of the following outside dia for class-3 (0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/ as per manufactures's providing and laying in trench cement concrete(1:4:8) with 40 mm size hard granite metal in the Type-C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge.160mm dia U-PVC pipe |
| 252 | Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge.In side size 250mmx250mm |
| 253 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-chargeInside size : 760mmx760mmx460mm |
| 254 | R.C.P.C.Cover(18\\" round man hole cover) |
| 255 | Supplying all materials ,labour ,T&P and constructing Man Hole Chamber of inside size 910mmx910mmx910mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken black hard granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing, conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-chargeInside size : 910mmx910mmx910mm |
| 256 | R.C.P.C.Cover(18\\" round man hole cover) |
| 257 | R.C.P.C.Cover(24\\" round man hole cover for septic tank ) |
| 258 | Supplying all materials, labour, T&P & constructing Soak Way Pit of the following size with dry brick walling from bottom upto invert of inlet pipe and KB brick work in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size crusher broken hard black granite metal on bed, 12mm thick cement plaster in cement mortar (1:4) inside and outside over masonry brick work, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips fitted with iron lifting handles including earth work in open well excavation in all kinds of soil and refilling of cavity around the pit and painting the iron works, watering, curing,cost of all materials,conveyance of all materials to worksite, payment of royalty, all taxes etc. all complete as per approved drawing,PH specification and direction of the Engineer-in- charge.1.40m dia x 2.00m deep inside size Soakway Pit |
| 259 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex / Anchor / Polycab / HAVELLS / RR KABLE / KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make- AKG / BEC / Precision / Norpak / Anchor / Kinjal, 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make- Schneider(Zencelo) / legrand( Myrius-NEXT GEN) / Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make- Schneider (Zencelo) / legrand( Myrius-NEXT GEN) / Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.Group B |
| 260 | Group C |
| 261 | Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FRLS PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia HMS FRLS PVC conduit ISI marked with 1.5sqmm FRLS PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge.(Make of Wires- Finolex / Anchor / Polycab / HAVELLS / RR KABEL / KEI) or equivalent) (Make of Conduit-AKG / BEC / Precision / Norpak / Anchor / Kinjal or equivalent reputed make A catagory ISI marked as approved) (Make of switch/socket- Schneider(Zencelo) / legrand( Myrius-NEXT GEN) / Panasonic (vision) or equivalent) (Make of accessories- Anchor/Havells) (Make of G.I box, face plate & cover-Schneider(Zencelo) / legrand( Myrius-NEXT GEN) / Panasonic (vision) or equivalent reputed make & model A catagory ISI marked as approved). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. Average Length: 3 mtr. |
| 262 | Recessed wiring to ceiling fan point with 1.5sqmm FRLS PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia HMS FRLS PVC conduit ISI marked with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FRLS PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of Wires- Finolex / Anchor / Polycab / HAVELLS / RR KABEL / KEI) or equivalent) (Make of Conduit-AKG / BEC / Precision / Norpak / Anchor / Kinjal or equivalent reputed make A catagory ISI marked as approved) (Make of switch/socket- Schneider(Zencelo) / legrand( Myrius-NEXT GEN) / Panasonic (vision) or equivalent) (Make of accessories- Anchor/Havells) (Make of G.I box, face plate & cover-Schneider(Zencelo) / legrand( Myrius-NEXT GEN) / Panasonic (vision) or equivalent reputed make & model A catagory ISI marked as approved). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. |
| 263 | Supplying, fixing of 5 pin 6A socket outlet in the existing switch board with complete fitting by 01 no of 6A switch (modular type) (anti bactorial & flame retradant type) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision) .(Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 264 | Supplying, fixing of 5 pin 6A socket outlet & 6A clip in type switch (modular type) (anti bactorial & flame retradant type) in separate board with complete fitting & suitable size modular box & cover( falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make- Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision). (Maximum 03 nos point in one circuit). All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 265 | Recessed wiring for 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer in Charge. (Make of switch/socket- Schneider(Zencelo)/Legrand( myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent) |
| 266 | Supplying, fixing of 6 pin 16 amp modular socket outlet with 16Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge. Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 267 | Supplying, fixing of 6 pin 16 amp modular socket outlet (for Projector/ Geyser / 1.5 TR A.C point) ISI marked mounted on separate G.I moular box and 16A clip in type modular switch ISI marked mounted on separate G.I moular box at nearest location with modular face plate & cover of suitable size including all accesories and connection as per direction of Engineer in Charge. Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision). (Only 01 no point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 268 | Supplying, fixing of 20A SPN Industrial type socket outlet with plug top and metal chained cover in sheet steel enclosure including all accesories and connection as per direction of Engineer in Charge. Make- Legrand / Schneider / Siemens / L&T. (Only 01 no point in one circuit). All the equipments should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 269 | Recessed wiring to submain in 4 x 16sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 50 mm dia non-metalic heavy duty PVC conduit along with 2 x 10 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant) (AC DB) |
| 270 | Recessed wiring to submain in 4 x 10 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 40 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant) (For POWER DB) |
| 271 | Recessed wiring to submain in 4 x 6sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant) (For LIGHT & UPS DB) |
| 272 | Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant) (For UPSDB / 2 TR AC) |
| 273 | Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant) (For POWER CKT / 1.5 TR AC) |
| 274 | Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant) |
| 275 | Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. (Make of wire- Finolex/Anchor/Polycab/ HAVELLS/RR KABEL or equivalent) (Make of conduit-AKG/Anchor/Kinjal or equievalant) |
| 276 | Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ Isolator) (Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model) / Panasonic (Equivalent model) /ABB (Equivalant model) or equievalant. 4 way (4 + 12) TPN double door horizontal type including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 277 | 6 way (4 + 18 ), TPN , MCB DB double door horizontal type |
| 278 | 8way (4 + 24 ), TPN , MCB DB double door horizontal type |
| 279 | Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface /recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. ( But with out MCB/ RCCB/ ISOLATOR) (Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalent model) /ABB(Equivalant model) or equievalant. 4 way SPN , MCB DB double door |
| 280 | 6 way (4 + 18 ), TPN , MCB DB double door horizontal type |
| 281 | Supply and fixing of following rating 240 V Minature Circuit Breaker (MCB) having a sensitivity current up to 10kA in the existing MCB DB ISI marked complete with connection testing and commissioning including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge.. (Make-LEGRAND- DX3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant 6 amp to 32 amp rating SP MCB , \\"c\\" series, 10KA breaking capacity |
| 282 | 32 amp DP MCB |
| 283 | Supply and fixing of following rating 240 V Residual Current Circuit Breaker (RCCB) having a sensitivity current up to 300mA in the existing MCB DB ISI marked complete with connection testing and commissioning etc including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge.. (Make-LEGRAND- DX3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant. 25 amp rating DP RCCB, 30mA |
| 284 | 25 amp rating FP RCCB, 30mA |
| 285 | 40 amp rating FP RCCB, 30mA |
| 286 | 63 amp rating FP RCCB, 100/300 mA |
| 287 | Supply of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of following sizes of cable including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. (Make- POLYCAB / FINOLEX / HAVELLS) or equievalant reputed ISI MARKED MAKE3.5 C x70sq.mm Al |
| 288 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size excedding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation , sand cushioning, protective covering and refilling the trench including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 289 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade ofsize exceeding 25 sq.mm but not exceeding 400 sq.mm in the existing RCC/HUME/STONEWARE/METAL pipe including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 290 | Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm on surface including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 291 | Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. 3.5 C x70sq.mm Al |
| 292 | Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including Busbars, interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used. ( Make of switchgear - LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/model) /ABB(Equivalant model) ISI marked) or equievalant make with proper model MAIN PANEL with 200A 4P Onload Change Over Switch, 160A 4P MCCB (36kA)- 1 No as incomer, 63A 4P MCB - 7 Nos, 32A 4P MCB - 4 Nos, 32A 2P MCB- 6 Nos as Outgoing and 3nos 160/5A CT, 1 No 0-160A Digital Multi Function Meter and 200A aluminium Bus Bars. |
| 293 | Earthing with G.I. earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (But wih out charcoal and salt) including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 294 | Extra for using salt and charcoal for G.I or copper plate earth including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 295 | Supplying and laying 25 mm x 6 mm G.I earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 296 | Supplying and laying 25 mm x 5 mm G.I earth strip ISI marked on surface or in recess for connection etc including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 297 | Surface mounted indoor type Trim Neo 20W SINGLE LED TUBE polycarbonate housing Luminaire with LED Lamp & driver Similar to WIPRO Cat No. LL20-221-XXX-65NE3 / JAQUAR / Philips / Halonix / Panasonic or equivalent including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 298 | Recess mounted indoor type IRIS NEO 15W ROUND LED Luminaire with LED Lamp & driver Similar to WIPRO Cat No. LD95-171-XXX-65-G1 / JAQUAR / Philips / Halonix / Panasonic or equivalent including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 299 | Surface mounted indoor type Iris Slim 15W ROUND LED Luminaire with LED Lamp & driver Similar to WIPRO Cat No. LD80-131-XXX-60-SM / JAQUAR / Philips / Halonix / Panasonic or equivalent including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 300 | Recess mounted indoor type Iris NEO 12W ROUND LED Luminaire with LED Lamp & driver Similar to WIPRO Cat No. LD95-141-XXX-65-G1 / JAQUAR / Philips / Halonix / Panasonic or equivalent including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 301 | Surface mounted indoor type Iris Slim 12W ROUND LED Luminaire with LED Lamp & driver Similar to WIPRO Cat No. LD80-101-XXX-60-SM / JAQUAR / Philips / Halonix / Panasonic or equivalent including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 302 | Surface mounted indoor type Elate 36W 2'x2' Square LED Luminaire with LED Lamp & driver Similar to WIPRO Cat No. CRCO10S038HP57G1L1 / JAQUAR / Philips / Halonix / Panasonic or equivalent including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 303 | Recess mounted indoor type Elate 36W 2'x2' Square LED Luminaire with LED Lamp & driver Similar to WIPRO Cat No. CRCO10R038HP57G1L1 / JAQUAR / Philips / Halonix / Panasonic or equivalent including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge |
| 304 | Surface mounted indoor type Trim Neo 10W SINGLE LED TUBE for Mirror Light polycarbonate housing Luminaire with LED Lamp & driver Similar to WIPRO Cat No. LL20-111-XXX-65NE3 / JAQUAR / Philips / Halonix / Panasonic or equivalent including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 305 | Supply, Installation, Testing and Commissioning of Ceiling Fan 1200mm sweep similar to Havells (ES Plus) or equivalemt, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 306 | Supply, Installation, testing and commissioning of Exhaust Fan of 300 mm sweep 900 rpm similar to Havells (Ventil Air DS) or equivalent in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 307 | Providing and fixing extra down rod of 50 cm length G.I. pipe 20 mm dia heavy gauge including painting etc as required . ( more than 5 cm lenght shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 308 | Recessed wiring to telephone point with clip in type modular telephone socket (RJ 11) ISI marked mounted on G.I modular box with face plate & cover of suitable size , including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 309 | Recessed wiring to television point with clip in type modular television socket ISI marked mounted on G.I modular box with face plate & cover of suitable size , including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 310 | Recessed wiring to LAN point with clip in type modular lan socket (RJ45) ISI marked mounted on G.I modular box with face plate & cover of suitable size , including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 311 | Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 312 | Supplying and fixing of 25mm PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 313 | Supplying and drawing one pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed PVC conduit including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 314 | Supply and drawing of TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated shielded with fine tined copper braid & protected with FR PVC sheath in existing surface / recessed STEEL / PVC conduit including all cost conveyance labour, Labour cess, taxes T&P etc complete in all respect as per specification & direction of Engineer in charge. |
| 315 | Supplying, pulling, and drawing Unshielded Twisted Pair (UTP) 4-Pair Category 6 (Cat-6) LAN cable through existing surface/recessed PVC conduits, trunking, or cable trays. Scope includes proper cable dressing, continuity and wire-map testing, tagging/labeling at both ends, all cost of Cat-6 cable materials, conveyance, loading/unloading, installation labour, statutory taxes (GST), Labour Welfare Cess, Tools & Plants (T&P like pull-wires, fish tapes, cable socks), and incidental charges complete in all respects as per detailed specifications and directions of the Engineer-in-Charge. |
| 316 | Supply, cutting, laying, and proper jointing of High Voltage Electrical Insulating Rubber Mats of size 2000 mm x 1000 mm x 12 mm thickness, conforming to IS 15652 / IS 5424 safety standards for electrical insulation. The mats must be complete with an official electrical routine/type test certificate from an NABL-accredited testing laboratory. Scope includes surface preparation, laying in front/rear of Electrical Control Panels, all cost of high-grade elastomer materials, conveyance, loading/unloading, installation labour, statutory taxes (GST), Labour Welfare Cess, T&P, and incidental charges complete in all respects as per detailed specifications and directions of the Engineer-in-Charge. |
| 317 | Supply, fabrication, painting, and wall/floor fixing of Fire Buckets with Angular Steel Fabricated Stand (capacity to hold 4 fire buckets per stand) for electrical fire protection, conforming to IS 2546 and requirements of the State Electrical Inspectorate / Central Electricity Authority (CEA) safety standards. Scope includes 4 nos. round-bottom galvanized steel fire buckets (9-liter capacity each) filled with clean, dry coarse sand, fire-red synthetic enamel painting, visual markings (\\"FIRE\\"), heavy-duty angle iron stand fabrication, wall/floor mounting fasteners, all cost of materials, conveyance, loading/unloading, installation labour, statutory taxes (GST), Labour Welfare Cess, T&P, and incidental charges complete in all respects as per detailed specifications and directions of the Engineer-in-Charge. |
| 318 | Supply, installation, testing, and commissioning of Portable Carbon Dioxide Fire Extinguisher (4.5 kg capacity) with seamless manganese steel/aluminum alloy cylinder, fully charged with pure gas as per IS 15222, complete with discharge hose, polyethylene/non-conductive discharge horn, wheel-valve/squeeze-grip valve, safety locking pin, and heavy-duty MS powder-coated mounting bracket/clamp. The unit shall be supplied with a valid PESO (Petroleum and Explosives Safety Organization) approval certificate and an NABL-accredited laboratory / original manufacturer Hydrostatic Pressure Test Certificate. Scope includes wall-mounting/fixing in the Electrical Control Panel Room, all cost of materials, conveyance, loading/unloading, labour, statutory taxes (GST), Labour Welfare Cess, T&P, and incidental charges complete in all respects as per detailed specifications and directions of the Engineer-in-Charge. |
| 319 | Supply and fixing of Electrical Shock Treatment Instruction Charts (in English, Hindi, and local language) along with a separate color-coded Single Line Diagram (SLD) of the electrical layout, both fully laminated and framed, to be securely wall-mounted inside the Electrical Control Panel Room. Scope includes high-quality printing, lamination/framing, all cost of materials, conveyance, loading/unloading, installation labour, hardware fasteners, statutory taxes (GST), Labour Welfare Cess, T&P, and incidental charges complete in all respects as per detailed technical specifications and directions of the Engineer-in-Charge. |
| 320 | Supply, testing, and handing over of High Voltage Electrical Insulating Rubber Hand Gloves rated for 11kV working voltage (suitable and safe for live-line operation on LT/HT networks), manufactured as per IS 4770 / IEC 60903 standards. The item must be delivered complete with an official electrical type test/routine test certificate from an NABL-accredited or recognized testing laboratory. The rate shall be all-inclusive of material cost, transit insurance, freight, loading/unloading, statutory taxes (GST), Labour Welfare Cess, T&P, and incidental charges complete in all respects as per detailed technical specifications and directions of the Engineer-in-Charge. |
| 321 | Supply, installation, and commissioning of wall-mounted Industrial First Aid Box (Heavy Duty Metallic/ABS Body) fully equipped with standard medical supplies having a minimum remaining shelf life/expiry date of 3 (three) years from the date of installation. The scope includes fixing the box inside the Electrical Control Panel Room using suitable fasteners, all cost of materials, conveyance, loading/unloading, labour, tools & tackles (T&P), statutory taxes, duties, Labour Welfare Cess, and incidental charges complete in all respects as per detailed specifications and directions of the Engineer-in-Charge. |
| 322 | Providing and laying Neelgiri /Mexican grass turfing with approved quality grass on prepared ground, including dressing, leveling, ramming, rolling with light roller, watering through sprinkler system, maintenance for a period of 60 days or until establishment of a thick, healthy, weed-free lawn fit for mowing, complete in all respects as directed by the Engineer-in-Charge. The work shall also include plantation of ornamental shrubs, flowering plants and small decorative plants in circular cement concrete pots placed along the periphery of VOTI Hostel Campus, including supply and placing of pots of size 35 cm top inside diameter, 25 cm bottom outside diameter, 35 cm height and 25.4 mm wall thickness, filling with good earth, manure and planting media, planting, watering, staking wherever required, and maintenance during the establishment period, complete as per approved landscape plan and directions of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender