Tender For miscellaneous Roof Leakage Repair & Preventive Maintenance Work Of Roofing System In Heep
Tender Value
25.39 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
4 days left
EMD
30469
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Haridwar → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for miscellaneous Roof Leakage Repair & Preventive Maintenance Work Of Roofing System In Heep
BOQ
| Sl. No. | Item Description |
| 1 | Carriage of materials by mechanical transport including loading, unloading and stacking: Steel:2 km Unit:tonne( S.l.No. : 1.1.5.2) Page No.: 63 |
| 2 | Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc.as required. :In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works. Unit:kilogramSTRUCTURAL STEEL SHALL BE ISSUED FREE BY BHEL.( S.l.No. : 10.32.2) Page No.: 123 - (Sl No. Code 1007) Page No.: 27 |
| 3 | Providing asbestos cement 6 mm thick corrugated sheets roofing and fixing with polymer coated J, or L hooks, bolts and nuts 8mm dia. G.I. plain and bitumen washers complete excluding the cost of purlins, rafters and trusses: corrugated sheets :Upto 60 degrees pitch Unit:sqmAsbestos cement sheet shall be issued free by BHEL.( S.l.No. : 12.10.1) Page No.: 137 - (Sl No. 0200) Page No.: 5 |
| 4 | Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. :150 mm diameter pipes Unit:metre( S.l.No. : 13.86.4) Page No.: 154 |
| 5 | Painting with aluminium paint of approved brand and manufacture to give an even shade . :Two or more coats on new work Unit:sqm( S.l.No. : 13.95.1) Page No.: 155 |
| 6 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. Unit:kg.( S.l.No. : 15.18) Page No.: 168 |
| 7 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: :G.S. Sheet Unit:sqm( S.l.No. : 15.28.1) Page No.: 169 |
| 8 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of: :Asbestos sheet Unit:sqm( S.l.No. : 15.28.2) Page No.: 169 |
| 9 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead ::150 mm dia pipe Unit:metre( S.l.No. : 15.42.3) Page No.: 171 |
| 10 | FIXING OF AVAILABLE PROFILED GALVALUME SHEETING AND FLASHING IN ROOFS/CLADDING FOR ALL HIGHT AS REQUIRED BY MEANS OF GALVANIZED SELF DRILLING SELF TAPPIING FASTENERS (12-14X55 WITH EPDM SEALS) AT RECOMMENDED SPACINGS FOR ALL HEIGHTS IN WORKSHOPS AND BUILDINGS INCLUDING ALL REPAIR/RECTIFICATION(CLOSING OF HOLES ETC.) REQUIRED WHEREVER AND CARTAGE OF ALL SHEETS TO SITE PROVIDED FREE OF COST AT DESIGNATED STORE COMPLETE AS PER DIRECTION OF ENGINEER IN CHARGE. |
| 11 | PROVIDING REINFORCED BY ORGANIC FIBRES AND/OR INORGANIC SYNTHETIC FIBRES CEMENT 6 MM THICK CORRUGATED SHEETS (AS PER IS: 14871) ROOFING UP TO ANY PITCH AND FIXING WITH POLYMER COATED J, OR L HOOKS, BOLTS AND NUTS 8 MM DIA.G.I. PLAIN AND BITUMEN WASHERS OR WITH SELF DRILLING FASTENER AND EPDM WASHERS ETC. COMPLETE (EXCLUDING THE COST OF PURLINS, RAFTERS AND TRUSSES), INCLUDING CUTTING SHEETS TO SIZE AND SHAPE WHEREVER REQUIRED. |
| 12 | Supply and Fixing of profiled sheeting 1000-1020 mm cover width, 28 -30 mm high 5 to 6 crests manufactured out of hi-tensile BARE Aluminium zinc alloy coated high tensile steel sheet (AZ-150 gsm. Aluminium –Zinc alloy metallic coating of total both sides 550 Mpa yield stress). The minimum Basic Material Thickness (BMT) should be 0.47 mm and TCT should be 0.50 mm . The sheet shall have wide pans with required nos. of small stiffening ribs for effective water shedding and special male/female ends with full return legs on side laps for purlin support. The male end of the sheet shall have anti-capillary flute at side laps to prevent leakages. The sheet shall be fixed by means of Galvanised selfdrilling self-tapping fasteners (12-14x55 with EPDM seals). The sheet shall be supplied in lengths maximum upto 6-12 Mtrs long to suit site dimensions. |
| 13 | FABRICATION OF M.S. STEEL GUTTER/RAIN WATER PIPE USING MS SHEET OF THICKNESS 2MM OR MORE IN REQUIRED PROFILE AS PER DRAWING INCLUDINGINCLUDING BENDING IN REQUIRED SHAPE, CUTTING, WELDING, GRINDING OF ALL WELDING JUNCTION/ JOINTS ETC AND FINALLY PAINTING ONE COAT OF RED OXIDE ZINC CHROMATE PRIMER PAINT OF APPROVED MAKE INCLUDING CARTAGE OF MATERIAL SUCH AS MS SHEET FROM STORE TO WORKING SITE, LABOUR, T&P ETC. REQUIRED FOR PROPER COMPLETION OF THE WORK (STEEL, WELDING ELECTRODES, GASES ETC. WILL BE SUPPLIED FREE OF COST.). NOTE: - THE ITEM DOES NOT INCLUDE THE ERECTION FOR THE SAME AND SHALL BE PAID SEPARATELY. |
| 14 | PROVIDING AND FIXING OF 3MM THICK ONE SIDE CLEAR EMBOSSED PROFILED TRANSPARENT POLYCARBONATE SHEET WITH UV RESISTANT HAVING SUITABLE PROFILE MATCHING TO THE ROOFING & CLADDING SHEETS WITH SUITABLE FASTENERS COMPLETE AS PER THE DIRECTION OF ENGINEER I/C. |
| 15 | CLEANING OF AC/STEEL/GI ROOF SHEETING CRANE GIRDER TOP, PLATEFORMS, GUTTERS/DRAIN PIPES INCLUDING ALL TOOLS AND TACKLES REQUIRED FOR CLEARING AND DISPOSAL UP TO 2 KM OF DUST/RUBBISH ETC.GENERATED/COLLECTED DURING CLEARING PROCESS, COMPLETE IN ALL RESPECT AS PER DIRECTION OF ENGINEER INCHARGE. |
| 16 | PROVIDING & APPLYING 'COLD APPLIED BITUMINOUS COMPOUND WITH MINERAL FILLERS', KNOWN AS \\"TARPLASTIC\\",CONSUMPTION @ AVERAGE 500 GM FOR REPAIR OF EACH POINT OF AC/ MS RAIN WATER PIPE/ GUTTER JOINT AT ALL HEIGHT UPTO 40.0 M FROM FLOOR INCLUSIVE WITH ALL NECESSARY ARRANGEMENT LADDERS, T&P, SAFETY PEPS AND LABOUR AFTER CLEANING THE SURFACE BY WAY OF REMOVING OLD WORN OUT PROTECTIVE LAYERS, DUST CLOGS, LOOSE PARTICLES, BROKEN GLASSES ETC. AND EXPOSING THE MOTHER SURFACE. NOTE : MEASUREMENT SHALL BE BASED ON NO. OF PIPE/ GUTTER JOINT POINT TREATED |
| 17 | Providing and implementing, personal protective equipments (PPEs) for workers working at heights. The scope includes the provision of PPEs, daily maintenance, and mandatory usage enforcement of the following safety gear: 02 Nos. Fall arresters with leading edge protection (min. 12 meters capacity), 02 Nos. Fall arresters with leading edge protection (min. 06 meters capacity), 05 Nos. ISI-marked Full Body Harnesses, 06 Pairs of Industrial Safety Shoes, 06 Nos. Industrial Safety Helmets with chin straps. The rate is inclusive of all equipment costs, daily inspections, handling, safe storage, TPI of all equipments if required and ensuring strict adherence to site safety protocols during the entire duration of the work at height. All equipents should be according to respected IS confirming, complete in all respects as per the direction of the Engineer-in-Charge. (All the PPEs will be handed over to BHEL after completion of work.) |
| 18 | Installing, maintaining, removing, shifting, and re-installing temporary Double Layer Safety Net (ISI marked Rope & Safety Net as per IS : 11057:1984), suspended beneath the working area, up to a height of 36 meters, with strict compliance to all safety protocols for working at height. The rate shall be inclusive of safety netting, manpower, supervision, equipment, tools & tackles, consumables, transportation, and all other incidental expenses required for proper installation, tensioning, anchoring, maintenance, and dismantling of the safety net system. The scope shall also include periodic inspection, tightening, rectification, and replacement of damaged or unserviceable portions of the safety net and associated accessories during the execution period. BHEL may provide EOT crane assistance for tying and shifting the safety net free of cost, subject to availability and operational scheduling. The entire scope of work shall be executed to the complete satisfaction of the Engineer-in-Charge. |
| 19 | Providing, installing, rigging, shifting, and demobilizing temporary engineered horizontal lifelines (using stainless steel wire rope of minimum 8 mm diameter) to the structural steel members of various trusses, including all necessary accessories for installation and the deployment of dedicated labor to continuously shift and reposition the system as required for site maintenance; the rate shall cover supply of SS wire rope, installation, shifting, and demobilization activities together with labor costs for installation of the lifelines. |
| 20 | Erection of fabricated overhead roofing gutters and downtake pipes by assembly, alignment, cutting, welding, drilling, at heights between 6m to 36m. Scope includes lifting of gutters to designated site, and the provision of all hardware (bolts, nuts, washers) and PPE's. Note: Welding transformers, electrodes, and gases (DA & oxygen) will be issued free of cost from BHEL stores.\\" |
| 21 | Supply of 15 Ton capacity Heavy Duty Hydraulic Crane (Commonly known as Hydra) equipped with a specialised, certified 2 men capacity basket attachment and multi-stage telescopic boom extension up to 85 feet to facilitate safe working at height, including operator, T&P and fuel etc. required for satisfactory operation of the machine as per the direction of Engineer-In-charge. Unit of measurement will be per day (8 working hours). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender