Tender For special Repair To Bldg No T-14 Of Hq Mb Area (Old Eme Workshop) And special Repair To Sewage Line, Septic Tanks, Manholies Incl Manhole Cover At Manekshaw Enclave Under Ge(P) No.1 Jabalpur
Tender Value
45.19 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
15 days left
EMD
90500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No T-14 Of Hq Mb Area (Old Eme Workshop) And special Repair To Sewage Line, Septic Tanks, Manholies Incl Manhole Cover At Manekshaw Enclave Under Ge(P) No.1 Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 2 | Taking down Cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 3 | Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar and removing debris and depositing complete all as specified and as directed. |
| 4 | Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 6 | Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc. 1.5 Sqm each. complete all as specified and directed. |
| 7 | ~ditto~All as per item No. 6 above but exc 1.50 Sqm n.exc 4 Sqm.complete all as specified and directed |
| 8 | M&L for brick work with Sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortor 1:6.complete all as specified and directed. |
| 9 | M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified and directed. |
| 10 | M&L for Cement concrete type D-2 1:4:8 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed |
| 11 | Providing, cement concrete type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, coping, Hold fast completely complete all as specified and directed. |
| 12 | M&L for Granite(of any type)tiles 16 to 18 mm thick as in any position and similar works over 10mm thick cement screed in CM 1:4, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite stone incl cutting, polishing complete. |
| 13 | M&L for Machine cut cudappah stone slab 30-35mm thick horizontal/ vertical partion over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed |
| 14 | M & L for Vitrified Ceramic tiles (light shade)10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 but n exc 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed in CM 1:4 to recieve tiles complete all as specified and directed. |
| 15 | M & L for Vitrified Ceramic tiles (light shade10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 but n exc 1.00 Sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10mm thick backing coat in CM 1:4 to recieve tiles complete all as specified and directed. |
| 16 | S&F Coloured Non Skid coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed in CM(1:6) complete all as specified and directed |
| 17 | S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick backing coat in CM(1:4) on fair face of brick or concrete surface complete all as specified and directed |
| 18 | S&F 10 mm thick paver tiles out door vitrified tiles area n. exc 0.36 sqm each as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed in CM(1:6) complete all as specified and directed |
| 19 | S&F Factory made single/double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm(double rebat) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length including fastenar of 100 mm long 10 mm dia complete all as specified and directed. |
| 20 | S&F Factory made single/double extruded WPC (Wood Polymer Composite) solid decorative prelam both side flush door 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture pr oof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, fixed with eye hole and good quality lense all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified. |
| 21 | S&F wire gauge i.e. panel will be wire gauge in liew of double side prelam PVC sheet panel the wire gauge shell be wrapped on a additional square 8 mm solid tube and the tube shell be welded to MS tube the wire gauge shell be stretched to tighten firmly Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed |
| 22 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed |
| 23 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded prelam colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed |
| 24 | S&F Butt hinges 100mm, medium weight, cold rolled mild steel, and fixed complete all as specified and directed |
| 25 | S&F 150 mm long extruded alu alloy handles, fabricated type, anodised.complete all as specified and directed |
| 26 | S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 27 | S&F 150mm long Aluminium,anodized barrel tower bolts of extruded section and fixed.complete all as specified and directed |
| 28 | S&F 100 mm long aluminium alloy type C-22 butt hinges with galvanised ms hinge pin etc.complete all as specified and directed |
| 29 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples. complete all as specified and directed |
| 30 | M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters/frame of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed |
| 31 | S&F Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. complete all as specified and directed |
| 32 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed |
| 33 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channelor flat sections) including distance pieces, cleats etc.complete all as specified and directed |
| 34 | S& F in repair Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 35 | S& F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 36 | M&L in repair suspended false ceiling system using chicago metallic (E grid) exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 34 mm X 24 mm X 0.8 mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 27mm X24mmX0.8mm thick and thick wall angle 22.2 mm X 22.2 mm X 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length)with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 3mm dia GI wire hangers fixed with steel dash through fasteners from purlins of the roof with Provn of light fixture complete all as specified and directed. |
| 37 | S&F in repair ovel type counter top Wash hand basin 550x400mm vitreous china (white) including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified and directed |
| 38 | S&F in repair 15mm bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 39 | S&F for in repairs 15mm angle cock/stop cock chromium plated,cast copper alloy, and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified and directed. |
| 40 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe bowl size750x550mm incl waste coupling and waste pipe complete all as specified and directed . |
| 41 | S&F in repair 15mm bore pillar, cast copper alloy, chromium plated, screwed for iron pipe and fixed complete all as specified and directed. |
| 42 | S&F in repair 15mm bore GI Tubes, 'medium grade',galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 43 | S&F in repair 20mm bore GI Tubes, 'medium grade',galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 44 | S&F in repair 20mm PVC float valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brassv ferrule and fixedcomplete all as specified and directed |
| 45 | S&F in repair Gun-metal, 20mm globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed |
| 46 | M&L in repairs PVC Nahani trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 complete all as specified and directed. |
| 47 | S&F 4.00 mm thick sheet glass ordinary quality and glazing complete all as specified and directed |
| 48 | S&F in repair bevelled edge mirror of selected 1st quality 5mm glass, mounted on 5mm thick PVC fibre board and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 49 | S&F 150mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor complete all as specified and directed |
| 50 | M&L for 150mm, ordinary rat tail rod/capsule rod pattern springs made of brass including roller and roller plate complete all as specified and directed |
| 51 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store complete all as specified and directed |
| 52 | S & F 110 mm dia, PVC (SWR) single socketed rain water pipe in any length with rubber ring joints fixed to walls incl taking down and MS clamps, nut, bolts etc complete all as specified and directed |
| 53 | S&F 110mm bore PVC (SWR) bends any radius.complete all as specified and directed |
| 54 | S&F 110mm bore PVC (SWR) junction single, (single T) equal or unequal any radius.complete all as specified and directed |
| 55 | S&F PVC (SWR) pipe inner dia 75mm single socketed in any length with rubber ring joint laid on wall/ceiling or laying in floors complete all as specified and as directed |
| 56 | S&F for 75 mm dia PVC (SWR ) bends and radius complete all as specified and directed |
| 57 | S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with or without access door complete all as specified and directed |
| 58 | M&L for preparation of new/old surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer. complete all as specified and directed |
| 59 | M&L for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Creosote complete all as specified and directed. |
| 60 | S&F of ball bearing runners 45 mm telescopeic chennal 20 inch full extendion load capacity 50 kgs smooth closing after gentle push complete all as specified and directed. |
| 61 | S&F of stainless steel handles 100 mm size for kitchen cabinet shutters etc complete all as specified and directed |
| 62 | S&F of chrome plated stainless steel (grade 304) wire basket suitable size(Storage basket) pull out type of large utensils with multipurpose use as per site requriment with necessary fixing clips etc. complete all as specified and directed |
| 63 | Providing and fixing factory made cupboard shutter with 18 mm thick one side decorative and other side balancing lamination factory pressed OSL HDHMR board of Action Tesa and Equivalent including 2 mm thick PVC edge banding type with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraullic type) etc, complete all as specified and directed. |
| 64 | Providing and fixing factory made with 18mm thick both side balancing lamination factory made HDHMR wood of action Tesa and equivalent approved brand for boxes, shelves, racks, almirah, cupboard and drawer etc including necessary nails, screws etc, complete all as specified and directed. |
| 65 | Providing and fixing factory made modular wardrobe with 8 mm thick both sides pre-laminated BSB (both side balancing paper) HDHMR of action tesa and equivalent as per IS: 14587 - 1998 with suitable full threaded steel screws etc on the backing of racks drawer, cupboard, kitchen, cabinet under kitchen counter etc,complete all as specified and directed. |
| 66 | S&F 30mm width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed |
| 67 | M&L for 15 mm thick cement plaster in CM 1:6 on internal surfaces of fair faces of brick work or concrete surfaces with finished surfaces even and smooth with out using extra cement complete all as specified and directed |
| 68 | M&L for 75mm thick PCC (1:2:4) Type C2 using 40mm graded stone agg as in plinth protection surface even and fair without using extra cement including forming & filling expension joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and as diected |
| 69 | M&L for emulsion paint with 1st quality acrylic eulsionr (ready mixed) washable, antifungal having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work/old surfaces of wall/ceilingas per manufacturer instructions applied over priming coat with fully automatic airless spary machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surfaces in both the coats of paint, complete all as specified and directed. |
| 70 | Material & Labour for applying Two or more coats of 100% on new/ old surfaces of wall/fascia etc Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces as per manufacturer instructions applied over priming coat with fully automatic airless spary machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surfaces in both the coats of paint.(upto 5 storey) complete all as specified and directed |
| 71 | M&L for water proof cement based putty @ 1 Kg (undiluted) per sqm mtr on layers over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surfaces with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surfaces free from dust etc by skilled labour as per following steps:- (1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with mixing capacity of min 2.5 kg putty per minute.(2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute with a maximum pressure 3300 PSI.(3) Allow 6-8 hrs time to dry the putty surfaces complete all as specified and directed |
| 72 | M&L for Complete removal of existing treatment of wall / ceiling complete all as specified and directed |
| 73 | S&F in repair SS curtain rails 20mm dia fixing with brackets, stops, rollers knob lattu etc. complete all as specified and directed |
| 74 | S&F SS chromium plated towel rail 20mm dia, D type, 60cm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed |
| 75 | S&F SS chromium plated towel ring 12mm dia, round type 150mm aperture, fixed with CP brass screws including wooden/plastic beads complete all as specified and directed |
| 76 | Providing precast cement concrete type B1 1:2:4 set in CM 1:6 in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed |
| 77 | S&F TMT steel bars 6mm to 8mm dia. and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and directed |
| 78 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 79 | Taking of liquid/solid content from sump/septic tank either manually or by pumping or by pumping clearing thoroughly includ+F7:F25ing disposal of liquid/solid content out of the Cantt area, disposing in pit and covering with layers of ea+F7:F25rth and taking all pracautions against foul/hazardous gas etc.(septic tanks, line, MH etc) complete all as specified and directed |
| 80 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. Including Tile Bedding layers and removing out side MD Land) complete all as specified and directed |
| 81 | M & L for cement concrete in foundations, filling and masss concrete type C2 1:3:6 (40mm graded aggregate) complete all as specified and directed |
| 82 | Excavating in trenches in any type of soil , n exc 1.5 m wide and n. exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soil.(septic tank soke well MH etc) complete all as specified and directed |
| 83 | Excavating in trenches in any type of soil , n exc 1.5 m wide and exc. 1.5 m in deep and n.exc 3.0m deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out soil (septic tank soke well MH etc) complete all as specified and directed |
| 84 | Returning, filling in, including spreading ,leveling, watering and well ramming in layers n. exc 25 cm with soil complete all as specified and directed. |
| 85 | Removal of excavated material (soil) to a distance exc 50 m n. exc 250 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. |
| 86 | Supplying and laying and jointing for (SN 8) DWCPE 219mm (OD)/ 200 (ID) conforning to IS-16098:2013 part -I with and incl jointing materials complete all as specified and directed |
| 87 | Supplying and laying and jointing for (SN 8) DWCPE 180mm (OD)/ 163 (ID) conforning to IS-16098:2013 part -I with and incl jointing materials complete all as specified and directed |
| 88 | M&L for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 using 40mm graded stone agg for 200mm dia pipe complete all as specified and directed |
| 89 | M&L for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 using 40mm graded stone agg for 163 mm dia pipe complete all as specified and directed |
| 90 | M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed |
| 91 | M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:4).complete all as specified and as directed. |
| 92 | M&L for Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in cement mortar 1:4 using sub-class complete all as specified and directed |
| 93 | M&L loose filling with agg of guage 80 to 150mm in soakage pits, soakage well using broken bricks complete all as specified and directed. |
| 94 | M&L, for 15mm thick rendering on any faces of stone, concrete or brick work in CM 1:4 surface finished even and fair complete all as specified and directed. |
| 95 | M&L for 15 mm thick rendering in cement mortar (1:3) on brick / concrete/ stone surfaces mixed with water proofing compound as per manufacturer instruction , finished even and smooth using extra cement complete all as specified and directed. |
| 96 | Supply only water proofing compound. complete all as specified and directed |
| 97 | S & F in repairs 110 mm dia, PVC bend complete all as specified and directed |
| 98 | M&l for cement concrete 1:2:4 type B1 (20 mm graded stone aggregate) as in coping complete all as specified and directed |
| 99 | M&L Precast (factory made frame and cover)cement concrete Type B-1 1:2:4 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:6 complete all as specified and directed. |
| 100 | M&L Reinforced cement concrete (nominal mix) in Type B1 1:2:4 (20 mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 101 | M&L Reinforced cement concrete (nominal mix) in Type B1 1:2:4 (20 mm graded aggregate) Walls, retaining walls, basement walls, ballast walls incl footing and the like; any thickness; above top of footings; including attached pilaster and buttresses complete all as specified and directed. |
| 102 | Use and waste Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including foundation, attached pillasters, buttresses, etc.; vertical or to batter for flat fair finish surfaces complete all as specified and directed |
| 103 | Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for flat rough surfaces complete all as specified and directed. |
| 104 | M&L TMT bars Mild steel 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 105 | M&L for cement concrete type B2 , 1:2:4 using 40 mm gradded stone aggregate in surface channels and drains complete all as specified and directed |
| 106 | Taking down carefully aluminium point wiring (light, fan, bell, socket, power point etc.) with or without conduit, casing caping, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator,light fittings etc., complete all as specified and directed. Note :- 1. Contractor has to submit existing bldg. inventory items having details of serviceable and unserviceable and physically verified with JE E/M during the handing taking of sites and before commencement of work.2. If work commence without signing of E/M inventory then contractor will be solely responsible for missing of E/M items and decision of engr- in- charge will be final in this regard .3. All E/M items received from site as a schedule of credit should be stored at location decided by engr-in-charge and should be taken out from bldg. premises/ stored location with confirmation to engr-in-charge. |
| 107 | M&L for point wiring with 1.5 Sq mm, FRLSH, PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through concealed conduit and including concealed PVC rigid non metalic conduit of size 19/20mm, on ceiling/wall, with and including continuous 1.5 Sqmm, FRLSH, PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including sunk metal sheet enclosure rectangular terminal boxes of suitable size and white cover plates suitable for mounting modular switches, sockets etc and making good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces for light points complete all as specified and directed |
| 108 | ~ditto all as per item No. 107 but for one Fan Point controlled by one switch. complete all as specified and directed |
| 109 | ~ditto~ all as per item No. 107 but for one Bell Point controlled by one switch. complete all as specified and directed |
| 110 | ~ditto~ all as per item No.107 here in before but with one 3 pin, 5 amps, socket outlet on the same board. complete all as specified and directed |
| 111 | ~ditto~ all as per item No. 107 here in before but with one 3 pin, 5 amps socket outlet on independent board. complete all as specified and directed |
| 112 | ~ditto~ all as per item No. 107 here in above but with 1100 Volts grade copper stranded conductor FRLSH cable of size 2.5 Sqmm main & with 2.5 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 15 Amp on Independent board complete all as specified and directed |
| 113 | M&L of Sub main wiring in repair with two single core PVC Insulated cable two run of size 4.0 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 4.0 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire .Including taking down old unsv . complete all as specified and directed Note : - Two run of 4 Sqmm & one run of 4 Sqmm cable and one run of pvc conduit shall be measured as one unit run. |
| 114 | M&L for Sub main wiring with two single core PVC Insulated cable two run of size 6.0 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 6.0 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire .Including taking down old unsv . complete all as specified and directed.Note : - Two run of 6 Sqmm & one run of 6 Sqmm cable one run of pvc conduit shall be measured as one unit run. complete all as specified and directed |
| 115 | Supply and fix in replacement modular bell push, 1 module, 6 amps, complete all as specified and directed |
| 116 | Supply and fix bell AC 230 volts, single pole complete all as specified and directed |
| 117 | Supply and fix in replacement modular switch type 230/ 250 volts, 6 amps, 1 module, single pole, one way, complete all as specified and directed |
| 118 | Supply and fix in replacement modular socket out let multi purpose 2 in 1, 2/3 pin, 6 amps,2 module flush type, ISI marked complete all as specified and directed |
| 119 | Supply and fix in replacement switch modular 16 amps, flush type, ISI marked complete all as specified and directed |
| 120 | Supply and fix in replacement modular socket 2/3 pin combined, 6/16 amps 2 module, flush type, ISI marked complete all as specified and directed |
| 121 | Supply and fix ceiling rose surface bakelite, three terminal complete all as specified and directed |
| 122 | Supply and fix in replacement Smart bright Batten Series, LED luminaire using LEDs 22/20 watt, natural white, 2200 Lumen, THD max 10 % ,CRI min 80 % with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start ,with 3 core flexible copper wire 1.5 sqmm and connecting accessories ,Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification .Including taking down old unsv .complete all as specified and directed |
| 123 | Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 124 | Supply and fix in replacement LED street light / security light fitting 35/36 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified and directed. |
| 125 | Supply and fixing in repair LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed/surface type, as directed, with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size .Including taking down old unsv . complete all as specified and directed NOTE: for slr No. 122 to 125 in last :- “All LED light fittings should have min 5 yrs warranty and requisite documents to be submitted” |
| 126 | Taking down ceiling fan/ exahausrt fan/ wall mounted fan , ceiling cable end, dismantling blades and removing fan , paintining of ceilingfan and exhaustfan complete in situ, with synthetic enamal paint by spraying including filling cavities with filler,one coat after cleanng all dust , replacement of fan clamp, pins ,fan rod capacitors replacement of bearing etc and refixing the same complete all as specified and directed |
| 127 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) also carefully taking down old /unsv item of any make/model and depositing it in MES store of AGE E/M (P)Jabalpur complete all as specified and directed |
| 128 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450mm sweep heavy duty with, blades, and frame and louvers of Make : Bajaj / Crompton /havells and also carefully taking down old /unsv item of any make/model and depositing it in MES store of AGE E/M (P)Jabalpur complete all as specified and directed |
| 129 | Supply and fix in repair rigid non metallic, medium grade, PVC conduit, concealed type of size 25 mm with all accessories such as couplers, lock nuts, saddles, pipe hook, tees, bends, etc., including cutting chases for conduits and making good the disturbed surface with PCC as per site requirement complete all as specified and directed. |
| 130 | Supply and fix in replacement modular stepped type electronic fan regulator flush type, two module on the existing phenolic laminated etc., as required, single pole, 240 volts, grade 120W watts, 2 Module heavy duty and ISI marked complete all as specified and directed |
| 131 | Supply and fix in repair Axial fan, steel body AC single Phase. 230V of size 300mm sweep heavy duty with, blades, and frame and louvers of and also carefully taking down old /unsv item of any make/model and depositing it in MES store of AGE E/M (P)Jabalpur complete all as specified and directed |
| 132 | S&F in replacement sheet metal enclosure MCB DB double door , Triple pole and neutral, 440 volts, 4 way with 200 Amp, 10 KA breaking capacity rated copper bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified and directed. |
| 133 | S & F in repairs MCB DB, SPN, 12 Way, 240 Volts, Vertical, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs complete all as specified and directed. |
| 134 | M&L for MCB Distribution board single door type SPN 4 way, sheet steel, powder painted for fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and directed. |
| 135 | S&F in replacment chimney hood with baffle filter ,60cm /1000m3/ hr suitable for two to four burner stove, touch control, motion control, gesture control on and off , three level of speed control noise level less then 60 db . Suitable for ducted installation or ductiess use , autoclean feature build in oil collector and led lamp min 2 year warrantly complete all as specified and directed |
| 136 | S&F in repair 4 inch , 10 ft flexible aluminium duct pipe for kitchen chimney with complete installation kits like crawl cover , tape Clamp etc complete all as specified and directed |
| 137 | Supply & fix repair RCBOs For earth Leakage , overload & short Circuit Protection Double Pole 2 A & 30 mA complete all as specified and directed |
| 138 | S&F in replacement MCB Triple Pole and Neutral 63 Amps,415 V ,10KA breaking capacity complete all as specified and directed. |
| 139 | S&F in replacement MCB Single Pole and Neutral 240Volt,upto 32Amps, 'C' series,10KA breaking capacity complete all as specified and directed. |
| 140 | S&F in replacement MCB Single Pole 240Volt, upto 40Amps,10KA breaking capacity complete all as specified and directed . |
| 141 | Supply and laying & testing and commisioning LT underground cable 1100 volts grade,in repair XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of the Size of 16sqmm x 4 core and as per relevance IS code complete all as specified and directed. |
| 142 | Supplying and laying DWCPE pipe OD 50 mm , ID 40/38 mm complete all as specified and directed |
| 143 | Earthing complete for various equipments with galvanised steel earth plate electrode 600 x 600 x 6mm thick directly burried in the ground (earth pit not less than 2.25 metre deep below ground level) with top edge of earth plate not less than 1.5 m below the ground level, connected to G.I wire 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, GI pipe 20mm bore light grade for protection of earthing strip, PCC chamber 1:4:8, type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber plastered with 12mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge ( 0.63) 8 mesh per linear inch, 50mm thick cover of RCC 1:2:4, type B-1, using 20mm graded stone aggregate, reinforced with 8mm TMT bar at 100mm center to center both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR Part-I and as specified including excavation and earth work and connecting the earthing to an earthing test point as specified and testing on completion complete all as specified and directed Note:- Unit rate quoted is inclusive of earth lead and protection pipe upto 7.5 metre from earth plate. |
| 144 | Schedule of credit of Amount Rs. 39,034.00 to be deducted during AOC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender