Tender For Construction Of Ors Institute For Other Ranks At Troops Line, Sqae(A) & Lpr And Provision Of R At Equipment Shed (Bldg No. P-37) At Sqae(A) & Lpr Khamaria Under Ge (P) No 1 Jabalpur.
Tender Value
35.67 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
3 days left
EMD
71500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Ors Institute For Other Ranks At Troops Line, Sqae(A) & Lpr And Provision Of R At Equipment Shed (Bldg No. P-37) At Sqae(A) & Lpr Khamaria Under Ge (P) No 1 Jabalpur.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Oct-2026 | Amendment in BOQ/ Tender Documents | Other | 30-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil. Complete all as specified and directed. |
| 2 | Excavation in treanches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells exc 10 sqm on plan and getting out any type of soil Complete all as specified and directed. |
| 3 | Excavation in treanches n.exc 1.5m wide and exceeding 1.50 m depth but n.exc 3.0 m in depth for foundation, etc or for shafts, wells exc 10 sqm on plan and getting out any type of soil Complete all as specified and directed.. |
| 4 | M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 5 | M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation & mass concrete complete all as specified and directed |
| 6 | M&L for 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate as in plinth protection finished even and fair incl expansion joint at every 3m interval and every corner complete all as specified and directed. |
| 7 | M & L for RCC design mix M-25 using 20mm graded stone aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. Complete all as specified and directed Note:- Reinforcement shall be measured and paid separately under respective item. |
| 8 | M & L for RCC design mix M-25 using 20mm graded stone aggregate in Columns, pillars, piers, posts and struts. Complete all as specifed and directed Note:- Reinforcement shall be measured and paid separately under respective item. |
| 9 | M & L for RCC design mix M-25 using 20mm graded stone aggregate in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed Note:- Reinforcement shall be measured and paid separately under respective item. |
| 10 | M & L for RCC design mix M-25 using 20mm graded stone aggregate in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed Note:- Reinforcement shall be measured and paid separately under respective item. |
| 11 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 12 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed |
| 13 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed |
| 14 | Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed |
| 15 | S&F TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) Complete all as specified and directed. |
| 16 | S&F TMT steel bars 5mm dia and over, up to and including 10mm dia in stirrups spcers and binders. Complete all as specified and directed |
| 17 | M&L for birck work with well burnt, old size sub class'B' bricks of straight or curved on plan exc 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 18 | M&L for birck work with well burnt, old size sub class'B' bricks of straight or curved on plan exc 6 metre mean radius half brick thick wall built in cement mortar (1:6) complete all as specified and directed. |
| 19 | M&L for rendering 15mm thick on brick work or concrete surface in CM 1:6 finished fair& even surface complete all as specified and directed |
| 20 | M&L for rendering 15mm thick on brick work or concrete surface in CM 1:4 finished fair& even surface complete all as specified and directed |
| 21 | M&L for rendering 15mm thick on brick work or concrete surface in ceiling CM 1:4 finished fair& even surface complete all as specified and directed |
| 22 | M&L for Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprisingof virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.complete all as specified and directed |
| 23 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.Complete all as specified and directed. |
| 24 | S & F for wire gauge i.e. panel will be wire gaugge in liew of souvle side prelam PVC sheet panel the wire gauge shall be wrapped on a additional square 8 mm solid tue and the tube shall be welded to MS to tube the wire gauge shall be linig wiremesh stainless steel 0.35mm dia and 1.40mm apature strctched to tighten firmly Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and directed. |
| 25 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain clour PVC sheet reinforced with M.S square tube in opening as per specification complete all as specified and directed |
| 26 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) manufactured as per SSR Part I specifications and drawing. consisting of frame made out of MS tubes for top & Bottom rails. MS frames shall be covered with heat moulded plain colour PVC \\"C\\" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement manufactured as per SSR Part I specifications and drawings.Complete all as specified and directed. |
| 27 | S&F in aluminium alloy anodized sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 300mm complete all as specified and directed |
| 28 | S&F 150mm long aluminium anodised handle cast type and fixed complete all as specified and directed |
| 29 | S&F 150 mm long aluminium anodised barrel tower bolt and 12 mm dia fixed Complete all as specified and directed. |
| 30 | S&F 100 mm long aluminium alloy type C-22 butt hinges with galvanised ms hinge pin etc.complete all as specified and directed |
| 31 | S & F in repair MS Rat tail pattern helicle doors spring/ capsule type size 150 to 200mm, ordinary springs including roller and roller plate complete all as specified and directed. |
| 32 | M&L for two coats of internal emulsion over on newly/old plastered surfaces of walls including preparation of wall incl old/new surfaces of wall over coat of wall care putty incl scraping down existing treatment/preparation (with all work carried out with mechanical sprayer/sander) complete all as specified and directed. |
| 33 | M&L for preparation of old surface ( Plastered or unplastered) of walls and applying two coat of water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. |
| 34 | M&L for preparation of old decorated surfaces of ceiling including brooming down or steel wire brushes, scraping down smoke soot moulds, moss and effeorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and directed |
| 35 | M&L for 25 mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate finishing cement concrete surface even and rough complete all as specified and directed. |
| 36 | M&L vetrified ceremic tiles 10 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specfied and directed. |
| 37 | ~ditto~all as per item No. 36 above item but in skirting with rendering 10mm thick CM 1:4 complete all as specified and directed. |
| 38 | M & L for Non Skid ceramic joint free tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of mortar with CM 1:4 complete all as specified and directed. |
| 39 | M&L for glazed ceramic tiles colour 350x250x7mm / 450x350x7mm thick in vertical surfaces such as skirting, dado and risers to steps set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles complete all as specified.and directed. |
| 40 | S&F in repair vitreous China squatting pan Orissa pattern, size 580 x 440mm white, with integral foot rest including provision of lime concrete bedding and connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floors complete.all as specified.and directed. |
| 41 | S&F in repairs vitreous china wash down water closet pan padestel pattern white including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia with mild steel chromoum plated hinging and 'P' or 'S' trap device complete all as specified and directed. |
| 42 | S&F in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fixed complete all as specified .and directed |
| 43 | S&F in repair PVC 10 litre capacity valve less syphonic action type, flushing cistern, low/high level, white/coloured with inlet ball valve, float and handle including brackets, etc. complete all as specified and directed |
| 44 | S&F in repair Wash hand basin Oval shape/flat back 550x400mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified and directed |
| 45 | M&L Cudappah stone slab on cooking platform/shelf 30-35mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match over complete all as specified and directed |
| 46 | M&L for Granite (of any type ) slab/tiles as cooking platform/shelf 16-18mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and cutting of holes for gas pipe Complete all as specified and directed. |
| 47 | S&F Rotational moulded polythylene 1000 Ltr capacity water storage tank(Cylindrical vertical with closed top) hoisted and fixed in position including PVC float valve 20 mm bore, high pressure with polythene ball & float complete all as specified and directed |
| 48 | S&F in repair 15 mm bore PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in position complete all as specified and directed. |
| 49 | S&F in repair 15mm bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed (Make/ sample approved by GE) Jaquar (FLR-5047N) or equivalent of Kohler, Roca |
| 50 | S & F in repair for Stop valves/angle cock cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed , 15 mm fixed complete. complete all as specified and directed |
| 51 | S&F in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed |
| 52 | S & F PVC connections 15 mm size with PTMT nuts of length 600mm fixed complete all as specified.and directed |
| 53 | S & F brass chromium plated overhead shower 150mm size with or without swivel joints including fixing to steel pipe of 15mm bore complete all as specified and directed. |
| 54 | S&F 600mmx450mm mirror of selected quality glass, mounted on 5mm thick PVC fiber board and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 55 | S & F Sheet corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete.complete all as specified and directed |
| 56 | S&F SS towel rail 20mm dia, D type, 60cm long between flanges fixed with CP screws including wooden/plastic beads complete all as specified and directed |
| 57 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position Complete all as specified and directed. |
| 58 | S & F Toilet paper holder of chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed |
| 59 | S&F in repair stainless steel chromium plated decorative drapery curtain rod (colour as approved) of 20 mm dia approved pattern and design including decorative knobs (wall side and free side) & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs/grips complete all as specified and as directed . |
| 60 | S&F in 15mm bore mild steel galvanized tubing medium grade with all fittings such as nipple, union, socket, elbow, bends, etc fixed to walls and making good the distubed surface to match previous structure with complete all as specified and directed |
| 61 | M&L Water proofing treatment on roof surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces Complete all as specified and directed. |
| 62 | a) M&L 10 mm thick rendering on roof surfaces/concrete surface in CM 1:3 Complete all as specified and directed. |
| 63 | b) Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster.Complete all as specified and directed. |
| 64 | d) Laying unrolled over the bitumen coated surface,3 mm thick polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction.Complete all as specified and directed. |
| 65 | e) Applying two coats of bituminous base aluminium paint on old Surfaces including preparation Complete all as specified and directed. |
| 66 | S & F powder coated (min thickness of powder coating 50 micorn) Aluminium door, window shutters,ventilator frame,Louvers with one or more rebates and shutter incl jointing cleat for fixing etc.Complete all as specified and directed.. |
| 67 | S&F 4mm thick sheet glass ordinary quality and galzing with necessory rubber beading of any size complete as in aluminium windows/ventilators complete all as specified and directed . |
| 68 | S&F in stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples.complete all as specified and directed |
| 69 | S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed |
| 70 | S&F, PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed |
| 71 | S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed. |
| 72 | S & F PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed |
| 73 | S&F PVC (SWR) 110mm bore 'T' equal or unequal complete all as specified and directed. |
| 74 | S&F PVC (SWR) vent cowl for 110 mm bore pipe complete all as specified and directed |
| 75 | S&F PVC (SWR) floor trap / Nahani trap with grating 75 mm dia incl jointing with solvent cement complete all as specified and directed. |
| 76 | Removing excavated soil n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point Complete all as specified and directed. |
| 77 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand Complete all as specified and directed. |
| 78 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required Complete all as specified and directed. |
| 79 | M & L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregare Complete all as specified and directed. |
| 80 | M & L for laying DWCP 150mm Minimum internal dia pipes in trenches class SN-8 conforming to IS-16098 (Part-2) in 6 mtr length with coulper Complete all as specified and directed. |
| 81 | Returning, filling in, including spreading, levelling, watering & well ramming in layers n exc 25 cm with any type of soil Complete all as specified and directed. |
| 82 | M&L for Brick work with sub class 'B' bircks straight or curved on plan exc 6mtr mean radius in CM 1:4 Complete all as specified and directed. |
| 83 | M&L for PCC 1:2:4 type B-1 using 20 mm graded aggregate as in bed blocks, bed blocks of hold fasts, coping and chamfered angles and throating etc.Complete all as specified and directed. |
| 84 | M & L providing & fixing factory made precast reinforcement cement concrete in landing cover slabs, (for manhole, drain cover etc) chullah hoodsm chajjas water troughs mangersm shelves and simolar articles with plain faces, set in cement mortor 1:4 type C1 1:2:4 (20 mm graded aggregate) Complete all as specified and directed. |
| 85 | M&L for Hand packing (any thickness) at back of walls over arches et and raising (or lowering) broken stone or boulders to the required level Complete all as specified and directed. |
| 86 | M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even and smooth with out using extra cement complete all as specified and directed |
| 87 | M&L for preparation of newly plastered wall surfaces including brooming down or steel wire brushes, scraping down smoke soot moulds, moss and effeorescent salts and trading oil and greasy spots and applying one coat of cement based paint. Complete all as specified and directed. |
| 88 | M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface Complete all as specified and directed. |
| 89 | M&L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less Complete all as specified and directed. |
| 90 | M&L for Point wiring (concealed) for light point in and including rigid non metalic PVC heavey duty conduit , 19/20mm dia suitable size including cutting chesses for conduits sinking for boxes for concealed conduit wiring with 1.5 sqmm FRLS PVC insulated , unsheathed multi stranded copper copper conductor cable single core 1100 volt grade including metal sheet enclosure rectangular boxes of suitable size and and white cover plate suitable for fixing modular switches ,sockets, and fan regulator etc including PVC insulated unsheathed multi stranded copper conductor of 1.5 sqmm as earth wire connected to common earth dolly as per IS specification and as specified in SSR part- 1 complete for one light point/fan point/bell point controlled by one modular switch 1 way 6 Amp,one module complete all as specified and directed. . |
| 91 | ~ditto~all as per item No 90 here in before but with one 3 pin 5 Amp socket outlet on the same board complete all as specified and directed. |
| 92 | ~ditto~all as per item No 90 here in before but with one 3 pin 5 Amp socket outlet on independent board complete all as specified and directed. |
| 93 | ~ditto~all as per item No 90 here-in-before but with 2.5 Sqmm copper conductor cable for one 3 pin, 15 Amps socket outlet on independent board. complete all as specified and directed. |
| 94 | S&F Switch Modular 6A one way, 1 module complete all as specified and directed. |
| 95 | S&F Switch Modular 16A one way, 1 module complete all as specified and directed. |
| 96 | S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. |
| 97 | S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 98 | M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed. |
| 99 | S & F LED lights fitting 20 watt, 220V, AC decorative box type Tube light with driver, holder including LED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceiling rose complete all as specified and directed. . |
| 100 | S & F LED Bldg Security light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant with IP 65/66 protection complete including GI bracket of suitable size bent to shape and fixed on wall with metal fastners 2 Nos incl drilling of holes as reqd and connecting up with flexible copper cable from ceiling rose to the light fitting and complete all as specified and directed. |
| 101 | S&F LED wall light fitting 10 W 230V IP 65 water proof outdoor light modern decorative wall lamp / warm white, pack 1 of up and down lighting fixtures complete including all necessary connection. complete all as specified and directed. |
| 102 | M&L for MCB Distribution board single door type SPN 8 way, sheet steel, powder painted for fixing MCBs of various rating capacity complete all as specified and as directed. |
| 103 | M&L for MCB SP 5-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' serie complete all as specified and as directed. |
| 104 | M&L for MCB SPN 32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed. |
| 105 | S&F ceiling fan complete with blades, down rod, electronic regulater and accessories 230V,1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including writing MES Number complete all as specified and directed. |
| 106 | M&L for Modular Fan step regulator, 120W - 2 module complete all as specified and directed. |
| 107 | Supply and fix echaust fan, steel body AC single phase 230V of size 300 mm sweep with blades, frame and louvers including making hole and making good distubed surface area. complete all as specified and directed. |
| 108 | Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below ground level, connecting GI strip of size 32mm x 6mm from earth plate to body of the equipment by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 40 mm bore GI light grade pipe for protection of earth lead from earth plate(6 mtrs long), 20 mm GI light grade watering pipe, PCC 1:3:6 type C-2 (using 40mm graded stone aggregates) as in earhing pit, PCC cover, charcoal or coke & salt filling and necessary excavation and earth work and all other relevant works including testing all as specified and shown in electrical plate No.3 of MES Schedule part-I. |
| 109 | Supply, laying, testing and commissioning UG cable XLPE insulated 10 Sqmm 2 Core, armored heavy duty electric cable, 1100 volts grade with stranded aluminium conductor in trenches including suitable size of double grip cable gland and joiinting etc complete all as specified and directed |
| 110 | Supply & laying GI pipe light grade 25mm dia with all GI fitting such as union, sockets,elbow,bend,tee,etc complete fixed on walls/celling/roof etc complete all as specified and directed |
| 111 | M&L for cushioning for protection of cable using dry river sand or M Sand, free from particles complete all as specified and directed |
| 112 | Sypply and laying un-reenforced precast concrete cable cover class LV type 1 flat size 250mmX150mmX40mm complete all as specified and directed |
| 113 | Supply laying and fixing of GI tubing medium grade galvanized ISI Marked with all necesary fittings of size 20mm laid in trenches complete all as spccified and directed. |
| 114 | Supply and and fixing Gun metal/brass, globe or gate valves with iron wheel head, screwed both ends for iron pipe of size 20mm dia. complete all as specified and directed |
| 115 | Supply and fixing Gun metal/brass, globe or gate valves with iron wheel head, screwed both ends for iron pipe of size 50mm dia.complete all as spccified and directed |
| 116 | M&L for Cutting existing steel water tubing for insertion of tees reducer , elbow, etc complete all as spccified and directed |
| 117 | Supply and Installation of air cooled split Air Conditioner, electric driven single phase of capcity 1.5 TR , BEE 5 star rated and EER 3.2 including fitment of required copper piping as required at site , control cable, outdoor unit stand and all installation accessories complete all as spccified and directed |
| 118 | Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA suitable for 1.5/2 TR air conditioner.complete all as spccified and directed |
| 119 | M&L for sub main wiring with 2 runs of 4 sqmm and one run as earth continuity wire single core PVC insulated unsheathed multistranded copper conductor cable 1100 volts grade FRLS drawing in and including PVC casing capibng in wall of suitable size complete. Note :-One run of three single core cable and conduit shall be measured as one length complete all as spccified and directed |
| 120 | Supply and fix single pole and nutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp complete all as spccified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 30, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender