Tender For Construction Of Auditorium-Cum-Multipurpose Hall At Degree College Reckong Peo In District Kinnaur Hp Balance Work For Building Portion Including Ws&Si And Site Development)
Tender Value
4.98 Crore
Estimated cost
Bid Submission
16 Oct 2026
3 days left
EMD
9.96 Lakhs
Bank guarantee accepted
Document Fee
7000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kinnaur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Auditorium-Cum-Multipurpose Hall At Degree College Reckong Peo In District Kinnaur Hp Balance Work For Building Portion Including Ws&Si And Site Development)
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing of the ground including removing vegetation and in-equalities any depth and disposal of rubbish, All kinds of soil , including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, upto all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 3 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% (Twenty percent), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 4 | Diluting and injecting chemical emulsion for post construction anti termite treatment Treatment of soil under floors and apron using chemical emulsion @ one litre per hole, 300 mm (Three hundred millimeter) apart including drilling 12 mm (Twelve millimeter) diameter holes and plugging with cement mortar 1 :2 (one cement : two Coarse sand) to match the Plinth level : With Chlorpyriphos/Lindane E.C. 20% (Twenty percent) with 1% (One percent) concentration, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 5 | Providing and laying water proofing treatment with Dr. Fixit-Torch Shield (P3160-3mm)or equivalent to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: Ist course of applying cement slurry @ 4.4 kg/sqm (Four point four kilogram per square meter) mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. IInd course of 20 mm (Twenty millimeter) cement plaster 1:3 (one cement : three coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. IIIrd course of applying blown or residual bitumen applied hot at 1.7 (One point seven) area. kg.per sqm (Kilogram per square meter) of IVth course of Dr. Fixit-Torch Shield (P3160-3mm )or equivalent and pasted to each other with bitumen @ 1.7 kg/sqm) (One point seven kilogram per square meter), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto all level. 1:3:6 (one Cement : three coarse sand (zone-III) : six graded stone aggregate 20mm (Twenty millimeter) nominal size) curing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 7 | Providing and laying Stone soling tightly hand packed, including watering, ramming and consolidating complete and carriage of materials, labour, tool and plants, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. But excluding GST. |
| 8 | Providing and laying concrete for plain/rainforced concrete in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 and 1203 PCC 1:4:8 (one cement : four coarse sand : eight graded stone aggregate ), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 9 | Making plinth protection 50mm (Fifty millimeter) thick of cement concrete 1:3:6 (one cement : three coarse sand : six graded stone aggregate 20 mm (Twenty millimeter) nominal size) over 75mm (Seventy five millimeter) thick bed of dry brick ballast 40 mm (Fourty millimeter) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 10 | Providing and laying damp-proof course 40mm (Fourty millimeter) thick with cement concrete 1:2:4 (one cement : two coarse sand (zone-III): four graded stone aggregate 12.5mm (Twelve point five millimeter nominal size), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 11 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 12 | Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg (One point seven kilogram) per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 13 | Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm (Twenty millimeter ) nominal size, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentalsThe rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 14 | Providing and laying reinforced cement concrete work 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm (Twenty millimeter ) nominal size in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor all level, excluding cost of centering, shuttering, finishing and reinforcement :including curing comnplete and entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 15 | Providing and laying reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor all level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (one cement : one point five coarse sand:three graded stone aggregate 20 mm nominal size) and curing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 16 | Providing Tor steel reinforcement for R.C.C. work (TATA/SAIL/JINDAL PANTHER/Rashtriya Ispat or its equivqalent ) for all work upto all level including cutting, bending, binding and placing in position complete in for all floor in all heights,Thermo-Mechanically Treated bars of grade Fe-500D or more, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 17 | Providing Tor steel reinforcement for R.C.C. work (TATA/SAIL/JINDAL PANTHER/Rashtriya Ispat or its equivqalent ) All works above plinth level upto floor-all level including cutting, bending, binding and placing in position complete in for all floor in all heights,Thermo-Mechanically Treated bars of grade Fe-500D or more, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 19 | Foundation, footing, bases of columns etc. for mass concrete |
| 20 | Lintels, beams, plinth beams, girders, bressumers and cantilevers etc. |
| 21 | Columns, Pillars, Piers, Abutments, Posts and Struts etc. |
| 22 | Suspended floors, roofs, landings, balconies and access platform etc. |
| 23 | Stairs, (excluding landings) except spiral-staircases etc. |
| 24 | Edges of slabs and breaks in floors and walls etc. |
| 25 | Providing and laying autoclaved aerated cement blocks masonry of Magicrete/Biltech Siporex/BirlaNu/JK Lakshmi SMART BLOX or equivalent, with 100mm/150mm/230mm/300 mm thick AAC blocks constructed using blocks conforming to IS:2185 (part 3) with minimum density 850 to 1000 kg/m3 as shown in drawing in super structure above plinth level up to floor all level with rcc band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-charge including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 26 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) in substructure & superstructure up to all floor level in all shapes and sizes in Cement mortar 1:6 (one cement : six coarse sand) and curing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 27 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) in superstructure above plinth level up to floor all level. Cement mortar 1:4 (one cement :four coarse sand) and curing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 28 | Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated of 12 mm (Twelve millimeter )thick one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed surface, with necessary fixing arrangement and screws etc including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 29 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position Kiln seasoned and chemically treated hollock wood including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 30 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). First Class Deodr Wood including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 31 | Providing and fixing 50/60 (Fifty/Sixty millimeter) mm thick acoustical door shutter, internally finished with 1 mm thick steam beech/maple veneer over 6 mm (Six Milimeter ) thick commercial plywood, fixed on 75(seventy five) × 50 (fifty) mm milimeter hardwood framework. The framework shall be filled with acoustic wool/insulation or equivalent approved sound-absorbing material for enhanced acoustic performance. The shutter shall be complete with necessary fixing, adhesives, edge treatment, sealing and all accessories required for proper installation, as per approved drawings and specifications including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 32 | Providing and fixing wooden plank 19 mm (Nineteen milimeter) thick RAI wood or its equivalent in walls and ceiling with tongued and grooved jointing and wood screws in the required pattern as per approved drawings and details. The wood shall be properly seasoned, treated and finished, fixed securely over the approved framework/substrate with necessary screws, fasteners, adhesives and accessories. (framework and cover fillets to be measured and paid for separately). The item shall include all cutting, shaping, grooving, jointing, edge treatment, wastage, labour and as specified, complete in all respects as per approved design and specifications including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 33 | Providing and fixing plywood 4 mm (four milimeter) thick, one side decorative veneer conforming to IS:1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 34 | Providing and fixing 50 mm (Fifty milimeter) thick wooden planks, having tongue and groove joints on all adjoining edges, of approved quality, species and finish, properly seasoned and treated, fixed over the approved framework/substrate with necessary screws, fasteners, adhesives and accessories. The item shall include cutting, shaping, fitting, jointing, sanding, edge treatment, wastage and labour, complete in all respects as per approved drawings, design and specifications. (base wooden frame to be paid separately)including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 35 | Providing 40x5 mm ( Forty into Five millimeter )flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 36 | Providing and fixing 19mm thick pre-laminated medium density fibre board exterior grade ( Grade-I) IS:14587:1998 marked with one side decorative and other side balancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm. ( Two millimeter) thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with necessary screw etc all complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 37 | Providing and fixing 19 mm (Nineteen millimeter) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc. complete, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 38 | Providing and fixing water proof kit ply 6mm. (Six millimeter ) thick of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 39 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 40 | Providing and fixing powder coated telescopic drawer channels 300 mm. (Three Hundred millimeter) long with necessary screws etc. complete as per directions of Engineer- in-charge including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 41 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :2nd class teak wood 50x12 mm (Fifty into Twelve millimeter )including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 42 | Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm. (Eighteen into five millimeter ) fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 43 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coatingnot less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 44 | 300 X 16 mm (Three hundred millimetres × sixteen millimetres) |
| 45 | 250 X 16 mm (Two hundred and fifty millimetres × sixteen millimetres) |
| 46 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc..including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 47 | 250 X 10 mm (Two hundred and fifty millimetres × Ten millimetres) |
| 48 | 150 X 10 mm (One hundred and fifty millimetres × ten millimetres) |
| 49 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 50 | 125 mm (One hundred and twenty-five millimetres) |
| 51 | 100 mm (One hundred millimetres) |
| 52 | Providing & fixing Powder coated aluminium hanging floor door stopper ISI marked with transparent or dyed to required shade and colour with screws etc. completeto suit shutter thickness complete including carriage of materials in all leads and lifts Twin Rubber stopper including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 53 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 54 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 55 | Providing and fixing PTMT door catcher of length 72 mm and diameter of 42mm with suitable washers weighing not less than 33 grams including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 56 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 57 | Providing and fixing bright finished brass hard drawn hooks and eyes 250 mm (two hundred and fifty milimeter)including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 58 | Providing & fixing 150 mm (One Hundred fifty millimeter )M.S. single acting spring hinges bright finished with necessary screws etc. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 59 | Structural steel work including hollow section riveted, bolted or welded in built up sections of TATA/SAIL/JINDAL or RASHTRIYA ISPAT or its equivalent, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete, In truss and trused purlins in buildings.and In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 60 | Steel work welded in built up sections/ framed work of TATA, SAIL or RASHTRIYA ISPAT or its equivalent, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required, In gratings, frames, guard bar, ladder, railings, brackets,ornamental brackets decorative MS screen gates and similar works, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 61 | Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (Twenty millimeter ) (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) and joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marbleBARODA Green marble or as per approved shade including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 62 | Marble stone with 18 mm (Eighteen millimeter ) thick marble stone,for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry including pointing with white cement slurry, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 63 | Providing and laying Cement concrete flooring 1:2:4 (one Cement :two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm (Fourty millimeter) thick with 20 mm (Twenty millimeter) nominal size stone aggregate including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 64 | Providing edge moulding to 18 mm (Eighteen Millimeter ) thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 65 | Providing and laying Antiskid Ceremic Digital tiles 60*60/60*120 cm of NITCO/Orient /Somany/Kajaria or its equivalent in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1 :4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 66 | Providing and fixing Ist quality ceramic glazed tiles 600mm *600 mm /600mm*1200mm of NITCO/Orient /Somany/Kajaria or its equivalent conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size in skirting dado and walls etc. as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 67 | Providing and laying red sand stone slab having size 600*600 mm in treads and risers of steps on a bed of 20mm (Twenty millimeter) thick cement mortar 1:4 (One cement : four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including preparing of nosing including rubbing and granite polish finish complete, including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 68 | Providing and laying factory made chamfered edge Cement Concrete paver blocks of NTC make or its equivalent in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. : 40 mm thick C.C. polished paver block of M-30 grade with approved color design and pattern including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 69 | Providing and laying 7 mm thick HDF-based Krono laminate flooring, Action Tesa or its equivalent , comprising high-density fibreboard core with approved decorative wood finish and wear-resistant top layer, laid over approved levelled and dry substrate with suitable underlay, using click-lock/tongue-and-groove jointing system as recommended by the manufacturer. The item shall include necessary underlay, edge cutting, fitting, jointing, skirting/edge finishing, wastage, labour and all necessary accessories, complete in all respects as per approved sample, drawings and manufacturer’s specifications including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 70 | Providing and laying 3.9 mm (Three point nine millimeter ) thick Teraflex flooring of Gerflor/Taraflex, Tarkett, Forbo, Polyflor or equivalent approved make, shade, colour and pattern over cement concrete flooring, including preparation of base by cleaning, removing dust, dirt, laitance and loose material, filling minor cracks and undulations with approved filler/self-levelling compound, application of suitable primer and approved adhesive, laying and pressing of Teraflex sheets/tiles with close-butt joints, properly aligned and finished, including joint sealing/hot welding with matching welding cord wherever required, cutting, wastage, edge finishing, necessary tools, materials, labour and all incidental charges, complete in all respects as per manufacturer's specifications and including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 71 | Providing and fixing suspended acoustical ceiling of 600 mm × 600 mm × 20 mm thick Phenotherm acoustic ceiling tiles of Bakelite Hylam or its equivalent approved make, in plain and pin-hole pattern, of approved make in in true horizontal/vertical/inclined/arch level as per detailed drawings ,suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size required as per site and drawings and laying false ceiling tiles of approved texture in the grid including required cutting/making, openings for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 × 37 × 25 × 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 × 30 × 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 72 | Providing and fixing suspended acoustical ceiling of 600 × 600 × 30 mm thick Phenotherm acoustic ceiling tiles of Bakelite Hylam or its equivalent of approved make, in plain and pin-hole pattern, of approved make in true horizontal/vertical/inclined/arch level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size required as per site and drawings and laying false ceiling tiles of approved texture in the grid including required cutting/making, openings for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 × 37 × 25 × 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 × 30 × 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 73 | Providing fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183 of Twigainsul (Saint-Gobain/U.P. Twiga) or Lloyd Insulations or Knauf Insulation or equivalent approved make, density 24kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 74 | Providing and fixing plain multipurpose cement board(Hight pressure steam cured) of Everest or equivalent approved make with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). 8 mm thick Cement fiber board as per IS: 14862 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 75 | Providing and fixing 25 mm thick wood wool acoustic board for walls, of HERADESIGN (Knauf) / MMT Acoustix WDWL/ Troldtekt or equivalent approved make, density, colour and finish, covered with approved non-woven acoustic fabric and fixed over 75 × 35 × 0.55 mm G.I. metal stud framework, including G.I. tracks/perimeter members, necessary screws, self-drilling screws, anchors, fasteners, clips and other fixing accessories, including cutting, fitting, jointing, levelling, alignment, fabric wrapping and tensioning, edge finishing, wastage, labour, tools and tackles, carriage of all materials to site including all leads and lifts, and all other incidental charges, complete in all respects including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 76 | Providing and fixing 20 mm thick textured/plain Bakelite acoustic wall tiles, size 600 × 1200 mm, of Bakelite Hylam or equivalent approved make , colour and finish, including fixing on approved G.I./M.S. wall furring framework(included) as required as per approved drawings and direction of Engineer-in-Charge, with necessary clips, screws, fasteners and accessories, including cutting, fitting, jointing, levelling, wastage and labour,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 77 | Providing and fixing 30 mm thick textured/plain Bakelite acoustic wall tiles, size 600 × 1200 mm, of Bakelite Hylam or equivalent approved make, colour and finish, including fixing on approved G.I./M.S. wall furring framework(included) as required as per approved drawings and direction of Engineer-in-Charge, with necessary clips, screws, fasteners and accessories, including cutting, fitting, jointing, levelling, wastage and labour,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 78 | Providing and fixing 0.60 mm (Zero point sixty millimeter) thick TATA, Durashine or its equivalent of approved make prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required,,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 79 | Providing and fixing precoated galvanised steel sheet roofing accessories of TATA, Durashine or its equivalent of approved make, total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Ridge plain (500 -600 mm),including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 80 | Providing and fixing precoated galvanised steel sheet roofing accessories TATA, Durashine or its equivalent of approved make,total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Valley plain (500 -600 mm) ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 81 | Providing and fixing flashing 38cm overall with 0.45mm thick prepainted sheet of TATA, Durashine or its equivalent of approved make, in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge:-0.60 mm ( zero point sixty millimetre) thick sheet including carriage of material within all leads and lifts ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 82 | Providing and fixing M.S. BP Sheet 1.66mm to 2.0 mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 83 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 84 | Providing and fixing ball bearing for rolling shutters ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 85 | Extra for providing mechanical device chain and crank operation for operating rolling shutters ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 86 | Providing and fixing 30cm (Thirty centimeter) wide 120 cm (One hundred twenty centimeter) overall box type gutter with 0.45 mm zero point fourty five millimeter) thick plain prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster 5 (five) microns over 5 (five) microns primer coating with iron brackets 40 X 3 mm Fourty into three millimeter) size bolt and nuts and washers etc. including making necessary connections with rain water pipe complete as per design, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 87 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm (One hundred ten millimeter) diameter, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals..The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 88 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories Bend 87.5° 110 mm (One hundred ten millimeter) bend, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 89 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories 110 mm (One hundred ten millimeter) Shoe (Plain), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 90 | Painting Steel work with Deluxe Multi Surface Paint of Asian/Nerolac/Burger or its equivalent to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (Zero point ninty liter per ten square meter) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (Zero point eighty liter per ten square meter)of approved brand and manufacture, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 91 | Applying priming coat of Asian/Nerolac/Burger or its equivalent over new wood and wood based surfaces with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 92 | Painting wood work with Deluxe Multi Surface Paint of Asian/Nerolac/Burger or its equivalent of required shade. Two or more coat applied @ 0.90 ltr/10 sqm (Zero point ninty liter per ten square meter) over an under coat of primer applied @0.75 ltr/10 sqm (Zero point seventy five liter per ten square meter) of approved brand and manufacture, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 93 | Polishing required coats with french polish of Asian/Nerolac/Burger or its equivalent on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt,dust,and sand papered smooth and including a coat of wood filler, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 94 | Applying priming coat on new concrete / plastered surfaces of Asian/Nerolac/Burger or its equivalent after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand tapering as required with ready mixed primer, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 95 | 6mm (Six milimeter) cement plaster to ceiling in cement mortar 1:3 (1 cement : 3 sand) including carriage of materials within all leads and lifts in all floor levels including carriage of materials within allleads and lifts :- 1:3 (1 cement : 3 fine sand) , including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 96 | 15mm (Fifteen milimeter)cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and sand opapered smooth including carriage of materials within allleads and lifts.. 1:6 (1 cement: 6 fine sand) , including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 97 | 15 mm (Fifteen milimeter)cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and sand opapered smooth including carriage of materials within allleads and lifts.. 1:6 (1 cement: 6 fine sand) , including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 98 | Providing and applying 12mm (Twelve millimeter )thick plaster in approved pattern, over prepared surface, including preparation of background, cement mortar, scaffolding, finishing, curing, necessary labour, materials and all incidental charges, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 99 | Wall painting with premium acrylic emulsion paint of of Asian/Nerolac/Burger or its equivalent interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats, , including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 100 | Painting with Satin enamel paint of of Asian/Nerolac/Burger or its equivalent approved brand and manufacture to give an even shade, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 101 | Providing and applying white cement based putty two coats of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 102 | Finishing walls with 100% Premium acrylic emulsion paint of Asian/Nerolac/Burger or its equivalent having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm (One point fourty three liter per ten square meter). Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm, ( Zero point ninety liter per ten square meter) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 103 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 andIS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing,paneling and dash fasteners to be paid for separately) : :Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 104 | Providing aluminium work for shutters of doors, windows & ventilators as per approved architectural drawings and specifications including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 105 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, of Green compact laminates of Merino Lam/Green Lam or its equivalent in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings including carriage of materials in all leads and lift as per direction of Engineer in Charge:-Pre-laminated particle board with decorative lamination on both sides including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 106 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): etc.With float glass panes of 5.00 mm thickness weight not less than 12.50 kg / sqm including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 107 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete asWith brass cover plate minimum 1.25 mm thickness including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 108 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 109 | Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete.205 X 19 mm including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 110 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. Anodized (AC 15 ) aluminium tubular handle bar including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 111 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 112 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. (Only weight of grill to be measured for payment) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 113 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. For Windows shutter of Aluminum Work including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 114 | Providing and fixing GRC cladding of unistone/NTC Stone /Garsa stone slab 12.5mm (twelve point five millimeter) thick cladding on R.C.C. ( reinforcement cement concrete) surface side as on faces of arch masonry walls etc. on 12mm thick cement plaster 1:3 ( 1cement : 3 sand ) and jointed with cement slurry i/c scaffolding etc complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 115 | Providing and laying 23cm dia half round stone ware pipe in cement concrete 1:6 complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 116 | Providing and fixing cyclorama screen of Elcor / Grandview or equivalent approved make, comprising 50 × 25 mm MS pipe framework with suitable bracing, duly treated with one coat of red oxide primer and finished with two coats of black paint, including fixing of approved perforated plastic screen, complete with necessary clamps, fasteners, supports, cutting, fitting, labour and all incidental charges, complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 117 | Providing and fixing cloth wings made of approved fire-resistant fabric of Moshi/Florada make or equivalent, in approved shade, stretched over 12 mm thick approved foam and securely fixed over the backing/framework, including necessary approved adhesive, staples, clips, screws and other fixing accessories, cutting, fitting, stretching, alignment, jointing, edge finishing, wastage, labour, tools and tackles, carriage of all materials to site including all leads and lifts, and all other incidental charges, complete in all respects as per approved drawings, specifications and directions of Engineer-in-Charge.(Note: Framework and 12 mm thick commercial plywood backing shall be measured and paid for separately.) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 118 | Providing and fixing stage curtain of approved fire-resistant cloth of Moshi/Florada make or equivalent, in approved shade and colour, complete with suitable curtain track/pipe, hooks, carriers, stitching, hemming, pleats, eyelets and necessary fixing accessories, including cutting, fabrication, installation, labour and all incidental charges, complete as per approved drawings including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 119 | Providing and fixing of expansion joint system related with floor location of approved makas per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover width and thickness required to satisfy projects movement and loadingplate shall be designed of requirements and secured to base members by utilizing manufacturer’s pre-engineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in- Charge. (Material shall confirm to ASTM 6063) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 120 | Providing and fixing white vitreous china water closet Single Piece of Jaguar or its equivalent \\" double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge a)\\"SLS-WHT-6851S300PP\\" of size 360*730*740 MM double traps syphonic water closet of approved brand/make, shape, size including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 121 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) of Jaguar/CERA/Hindware or its equivalent approved make with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size type foot rests 580x440 mm with integral including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 122 | Providing and fixing wash basin Table Top Basin of Jaguar/CERA/Hindware or its equivalent approved make Size 530*420*140 mm of Jaguar \\"JDS-WHT-25907N\\" with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 123 | Providing and fixing wash basin of Jaguar/CERA/Hindware or its equivalent approved makewith C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 124 | Providing and fixing white vitreous china pedestal Jaguar/CERA/Hindware or its equivalent approved make for wash basin completely recessed at the back for the reception of pipes and fittings including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 125 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of Jaguar/CERA/Hindware or its equivalent approved make approx. size 355*340*535 mm \\"URS WHT-13261H\\" having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 126 | Providing and fixing C.P. brass long nose bib cock of Jaguar/CERA/Hindware or its equivalent approved makeconforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 127 | Providing and fixing C.P. brass angle valve Jaguar/CERA/Hindware or its equivalent for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 128 | Providing and fixing toilet paper holder C.P. brass of Jaguar/CERA/Hindware or its equivalent including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 129 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 130 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 131 | Providing and fixing PTMT towel rail of Jaguar or its equivalent complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm (Six hundred milimeter) long towel rail with total length of 645 mm (Six hundred fourty five millimeter), width 78 mm (seventy eight millimeter) and effective height of 88 mm (Eighty eight millimeter) , weighing not less than 190 gms, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 132 | Providing and fixing of CP brass Health faucet with 8mm dia 1mtr (One meter). Long PVC tube and wall hook fixed to wall with rawl plug and CP brass screws complete. (Make: Jaquar Cat. No.(ALD-CHR-573) or equivalent make, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Chargeincluding entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 133 | Prividing and Fixing 1.5 (One point five) feet long connecting hose with nuts at both ends complete.(Make: Jaquar Cat.No.(ALD- CHR-805B) or equivalent make as approved by Engineer- in-Charge) for health faucet, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 134 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040mm (Five hundred ten into one one thousand fourty millimeter) bowl depth 250 mm (Two hundred fifty millimeter) ,including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 135 | Providing and fixing J shaped Sink Cock (Make: Jaquar Cat.No.(5347N) or equivalent make as approved by Engineer-in-Charge), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 136 | Providing and fixing CP Brass Single lever telephonic wall/Wash basin mixer of Jaguar or its equivalent quality & make, 15mm (Fifteen millimeter) nominal dia, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 137 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40mm dia (Fourty millimeter diameter) ., including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 138 | Providing and fixing 600x120x5mm (Six hundred into one hundred twenty into five millimeter) glass shelf with edges round off of Jaguar or its equivalent, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (FOurty millimeter) long screws, rawl plugs etc., complete, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 139 | Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( one cement : three coarse sand :six graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (one cement : four coarse sand) : 150mm dia (One hundred fifty millimeter diameter). including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 140 | Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & Concealed work, including cutting chases and making good the wall etc, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 141 | 1216 (16 mm (Sixteen millimeter) OD) pipe |
| 142 | 1620 (20 mm (Twenty millimeter) OD) pipe |
| 143 | 2532 (32 mm (Thirty two millimeter) OD) pipe |
| 144 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 145 | 15 mm dia (Fifteen millimeter diameter) nominal bore |
| 146 | 20 mm dia (Twenty millimeter diameter) nominal bore |
| 147 | Making coneection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: 25 to 40mm (twenty five millimeter to fourty millimeter) nominal bore, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 148 | Fixing water meter and stop cock of Jaguar or its equivalent in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete ( cost of water meter and stop stop cock to be paid seprately). a) 200 mm (Two hundred millimeter) nominal bore, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 149 | Providing and fixing gun metal gate valve 25 mm (Twenty five millimeter) nominal bore.with C.I. wheel of approved quality (screwed end),including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 150 | Constructing masonry Chamber 30x30x50 cm (Thirty into thirty into fifty centimeter) inside, in brick work in cement mortar 1:4 (one cement :four coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (One hundred into one hundred into seventy five millimeter) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( one cement : five fine sand : ten graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12mm thick, finished with a floating coat of With common burnt clay F.P.S.(non modular) bricks of class designation 7.5, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 151 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. In all floors , including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 152 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete150mm dia (One hundred fifty millimeter) , including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 153 | Providing and fixing PVC Clamps ISI marked of adhesive design with steel screws and rawl plugs etc. complete. 150 mm dia (One hundred fifty millimeter diameter) , including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 154 | Providing and fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm (Three millimeter) tick bolts and nuts complete 150 mm (One hundred fifty millimeter) , including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 155 | Providing and fixing PVC plain double equal branch ISI marked complete including fixing with approved adhesive etc. complete 150 mm (One hundred fifty millimeter), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 156 | Providing and fixing PVC door bend with ovalaccess door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete 150 mm (One hundred fifty millimeter), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 157 | Providing and fixing PVC collars ISI marked including fixing with aprooved adhesive etc complete 150 mm (One hundred fifty millimeter), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 158 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 150 mm x 75 mm (One hundred fifty into seventy five millimeter), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 159 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design , including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 160 | Inside size 90x80 cm (Ninety into eighty centimeter) and 45 cm (FOurty five centimeter) deep including C.I. cover with frame (light duty) 455x610 mm (Four hundred fifty five into six hundred ten millimeter) internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. |
| 161 | Inside size 120x90 cm and 90 cm (One hundred twenty into ninety centimeter) deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With Sewer bricks conforming to IS : 4885. |
| 162 | Providing and fixing stainless steel (S.S. 304 grade) grab bar of 32 mm nominal diameter and 1.5 mm thick, of approved make and quality, for Divyang/PwD toilet, including S.S. wall flanges, brackets, escutcheons, supports and necessary S.S. screws, anchors, rawl plugs and other fixing accessories, securely fixed to the wall, including drilling, cutting, fitting, levelling, alignment, labour, tools and tackles, , including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 163 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas including getting out the excavated soil and disposal of surplus excavated soil as directed, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 164 | Providing and laying Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement : six coarse sand : twelve graded stone aggregate 20 mm (Twenty millimeter) nominal size) upto plinth level with :Cement mortar 1:6 (one cement : six coarse sand), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 165 | Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. |
| 166 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 60 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes but excluding GST imposed by the Government. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender