Tender For special Reapir To Bldg No. P-82 Shed Of At Coy And Provn Of Animal Inspection Treatment Shed At At Coy Under Ge (North) Binnaguri
Tender Value
38.62 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
24 days left
EMD
77250
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Reapir To Bldg No. P-82 Shed Of At Coy And Provn Of Animal Inspection Treatment Shed At At Coy Under Ge (North) Binnaguri
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Oct-2026 | Date corrigendum | Date | 12-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing n.exc 15cm deep and averaging 15cm deep in soft/loose soil complete all as specified and as directed |
| 2 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, UG cable, Pipe laying etc and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 3 | M&L for plain cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed. |
| 4 | M & L PCC 1:2:4 type B-I ,(using 20 mm graded stone aggregate) as. in coping /benching to sides of foot path finishing fair and even complete all as specified and as directed. |
| 5 | M&L for 75mm thick PCC (1:4:8) type D-2 with using 40mm graded stone aggregates as in sub base finished the concrete surfaces fair and even complete as specified and as directed. |
| 6 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 7 | M&L for hardcore of gauge n. exc 63mm, deposited, broken stone or boulder spread and levelled in layers n. exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 8 | M&L 25 mm thick PCC (1:2:4) type B1 20 mm graded stone aggregate levelling course for bath , WC floor below tiles finishing the surface even & fair complete all as apecified and directed. |
| 9 | M&L 75mm thick cement concrete (1:3:6) type C-2( using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed. |
| 10 | M&L rolled mild steel tube as in vertical post fixed independently etc.confirming to Fe-410W (Gde E-250 quality A) complete all as specified and directed. |
| 11 | S&F Roof trusses (framed), trussed, purlins,rafter, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, tubular or flat sections) including distance pieces, cleats, plate etc.confirming to Fe-410W(Gde E-250, quality A) complete all as specified and as directed. |
| 12 | M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square but (dia of neck 10mm and 10cm long) complete all as specified and as directed. |
| 13 | S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed |
| 14 | M&L for preparation of new of previously untreated steel and iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 15 | Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. |
| 16 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose complete all as specified and as directed. |
| 17 | M&L RCC (nominal mix) type B1 (1:2:4) using 20 mm graded aggregate in Fins, fascias, louvres, parapets, chajja/sunshade, shelves and railings , newels, balustrade & the like complete all as specified and directed. |
| 18 | M&L Formwork to Fins, fascias, louvres, parapets, chajja/sunshade, shelves and railings , newels, balustrade & the like flat, Fair finished surfaces of concrete flat complete all as specified and as directed. |
| 19 | M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 20 | M&L Glazed ceramic coloured tiles/digital elevation tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed white or colour cement to match including screed bed or beded layer 10mm thick in cement moratr 1:4 complete all as specified and directed. |
| 21 | M & L for 16 to 18 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf,Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20 mm thick screed bed (1:6) including rounding the exposed surfaces of granite complete all as specified and as directed. |
| 22 | M&L machine cut Kota stone slab as in flooring, 20-22 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over & including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 23 | Ditto as above but as skerting and riser of steps & including screed bed of 15mm thik in cement mortar 1:4 |
| 24 | M&L cutting grinding, rubbing and polishing for old kota stone flooring with gap filling with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and as directed. |
| 25 | M&L CI floor trap 100 mm plain with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed. |
| 26 | S&F 15 mm bore Stop valves/ angle cock, chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 27 | S & F grating doom 125mm dia with waste hole of PTMT (min wt 40 gms) complete all as specified and as directed. |
| 28 | S&F vitreous china wash basin Table top, white oval shape size 600x400x160mm including waste chain and plug and porcelain stopper but including brackets, waste pipe & CP waste coupling, PVC connection 450 mm long with PTMT nuts complete all as specified and as directed. |
| 29 | S&F 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 30 | S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chomium plated bracket guard and railing 60 cm long complete all as specified and driected. |
| 31 | S&F CP towel ring complete all as specified and directed. |
| 32 | S&F 600mm x 450 mm beveled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 33 | S&F 20 mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed. |
| 34 | S&F 15 mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed. |
| 35 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and as directed. |
| 36 | S&F 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and as directed. |
| 37 | S&F 110mm dia PVC SWR bends of any radius with out access door complete all as specified and as directed. |
| 38 | M&L rendering 15mm thick plastering in cement mortar (1:6) on on fair faces of brick work and finished the plastered surface fair and even without using extra cement.complete all as specified and as directed. |
| 39 | M&L preparation of new plastered surfaces of wall and applying and applying two coat of white wash complete all as specified and as directed. |
| 40 | M&L brick works with fly ash bricks straight or curved on plain exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed |
| 41 | Taking down Chowkats or frame exc 1.5 SqM but n.exe 4 Sqm each without taking off shutters from the frame complete all as specified and as directed. |
| 42 | S&F 1.25mm thick pressed steel framed for door with one or more rebates including necessary fixing lugs, hinges, lock strike plates, size of frame 105 X 60 mm including 100 mm size hinges, with one shop coat of zinc chromate primer complete all as specified and as directed. |
| 43 | M&L PCC type C-0, 1:3:6 using 12.5mm graded aggregate as in bed block for fixing of hold fast, filling concrete in back of pressed steel frame filling,gaps in between glazed & fly proof steel window, cills, railling up to 60 cm in height etc including necessary form work as required all complete all as specified |
| 44 | S&F 30mm thick second class hard wood factory made flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 45 | S&F 150mm aluminium handles cast type anodised complete all as specified and as directed. |
| 46 | S & F 150 mm long Mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and as directed. |
| 47 | S&F 250mm long Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed. |
| 48 | S&F in repair factory made pressed steel windows and ventilators of standard size and section as shown on HQ CE Siliguri Zone Drg No CESZ/2018/TD-07, Sheet 1/3 to 3/3 with double shutter i.e. glazed & wire gauged shutter including all fittings like MS hold fast, box hinges, Handles, MS Tower Bolts, Stoppers, hinges, MS stay with long screw, MS spring latch, MS Guard Bar/ grill etc complete with glazing bars including one shop coat of zinc chrome primer complete all as specified and as directed.Note:- (i) Rate quoted shall be deemed to be including of all fittings fixtures.(ii) Glass, wire mesh and painting only shall be measured and paid separately under relevant items of Sch.(iii) The Drawings referred above are available in the office of Engr-in-Charge and can be refereed in the office working hours if required. |
| 49 | Description all as per Item No. 48 above but without glazing bars complete all as specified and as directed. |
| 50 | S&F steel ventilator top hung shutter including hinges, steel peg stay, fixing lugs etc complete with or without glazing bars incl taking down of old steel ventilators of any size complete all as specified and as directed. |
| 51 | M&L for preparation of new or previously undecorated wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of Pink primer complete all as specified and as directed. |
| 52 | M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as Specified and as directed. |
| 53 | S&F in repair 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed. |
| 54 | S&F stainles steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 55 | Demolition of brick work built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed. |
| 56 | All as per item 40 here-in-before but expect bricks complete all as specified and as directed.Note: Seviceable bricks obtained from item No 55 here-in-before shall be reused. |
| 57 | Taking down cement plaster on brick work of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed. |
| 58 | M&L rendering 15mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm & 5mm) mixed with liquid water proofing compound in top layer as per manufacturer's instructions, finishing the surface even and smooth without using extra cement complete all as specified and as directed. Note: WPC shall be measured & paid separtely under appropriate items. |
| 59 | Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed |
| 60 | M&L preparation of newly plastered surfaces on wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 Ltre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces as per the manufacturer instruction complete all as specified and as directed. |
| 61 | M&L prepartion of newly plastered surfaces of walls and applying two coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50gm/ltr of approved manufacturer rquired shade and colour over a coat of primer after applying 1mm thick wall care putty including complete removal of existing treatment all as specified and as directed. |
| 62 | M&L complete removal of existing finishes, prepartion of old surfaces of walls and applying two coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50gm/ltr of approved manufacturer rquired shade and colour over a coat of primer after applying 1mm thick wall care putty including complete removal of existing treatment all as specified and as directed. |
| 63 | M&L complete removal of existing treatment from old surfaces of wall and applying two or more coats 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 64 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and as directed. |
| 65 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but n. exc. 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including cement screed bed / backing layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed.Note:- Design and pattern shall be approved by GE at the time of execution of work. |
| 66 | S&F coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm as in vertical surface such as skirting, dadoo etc but not exceeding 0.38 Sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick seved bed or beddy layer in cement mortar 1:4 as in floor complete all as specified and as directed |
| 67 | M&L for 10 mm thick rendering in CM (1:4) as in vertical surfaces of skirting/ dadoo of staircase/ steps finished even & smooth without using extra cement complete all as specified and directed. |
| 68 | S&F in repair, 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 69 | S&F in repair, 600mm x 450 mm beveled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 70 | S&F in repair, 15 mm bore Stop valves/ angle cock, chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 71 | Demolition of cement concrete (un-reinforced ) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 72 | M&L cement concrete using type C1 1:3:6 with 20 mm graded stone aggregate as in cills steps, string courses parapets and railings upto 60cm in height, coping including weathering, slighhtly rounded or chamfered and throating complete all as specified and as directed. |
| 73 | M&L Cement concrete using type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in channel and drain complete all as specified and as directed. |
| 74 | Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 75 | Taking up or down steel tubing and connections, 15 mm bore complete all as specified and as directed. |
| 76 | Taking up or down steel tubing and connections, 20 mm bore complete all as specified and as directed. |
| 77 | S&F in repairs 15 mm dia Bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 78 | S&F in repairs 15mm bore PVC connections with PTMT nuts of length 450mm complete all as specified and as directed. |
| 79 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 80 | Dismantling of plan or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering complete all as specified and as directed. |
| 81 | S&F Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed |
| 82 | M&L concealed point wiring One light point controlled by one way switch 5/6 amps complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LSH (ISI marked) as earth continuity conductor connected to common earth dolly, modular sheet steel sunken terminal box of appropriate size (minimum thickness of sheet not less than 0.8mm) suitable for modular switch/ fittings fixed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. complete all as specified and as directed. complete all as specified and as directed Note:- (i) Connections of cable with MCBs or bus bar shall be sone through proper size of copper/brass thimbles. (ii) Where concealing of conduit is not feasible ie on surface of RCC roof/ceiling etc, conduit shall be fixed on surface with necessary saddles at no extra cost (a) one light point controlled by one way switch 5/6 amps. |
| 83 | All as per item no 82 above, but for one ceiling fan/ exhaust fan point controlled by one, one ways switch and regulator |
| 84 | All as per item no 82 above, but for one 3 point 5/6 Amps switch socket outlet point controlled by one switch on the same board |
| 85 | All as per item no 82 above, but for one 3 pin 5/6 Amps switch socket outlet point controlled by one swtich on independent board. |
| 86 | All as per item no 82 above, but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including ruining of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly, complete all as specified and as directed. |
| 87 | S&F modular switch 6 amp of one module complete all as specified and as directed. |
| 88 | S&F modular switch 16 amp of one module complete all as specified and as directed. |
| 89 | S&F modular socket 16 amp 2/3 pin combined 2 module 230 volt flush type complete all as specified and as directed. |
| 90 | S&F modular socket 6 amp 2/3 pin combined 2 module 230 volt flush type complete all as specified and as directed. |
| 91 | S&F modular fan regulator 120W 230 volts AC 50 Hz 2 modules complete all as specified and as directed. |
| 92 | S&F ceiling rose, bakelite, surface type 220/240 volts, three terminals complete all as specified and as directed |
| 93 | S&F IP 20, class I LED tube light 1 X 18 W (or nearest next higher wattage) (4feet), 5700K, wall surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more. luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete with all accessories internally prewired and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose with connector block. including necessary taking down the old unserviceable fitting complete all as specified and as directed. |
| 94 | S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as specified and as directed. |
| 95 | S&F Sheet metal enclosure for 8 way Distribution Boards (DB's), double door, single pole & neutral with 200 amps rated bus bar, 415Volt IP-20 protection suitable for fixing MCB S/Isolators with and including taking down old one complete all as specified and directed. |
| 96 | S&F MCB SPN 230 volts suitable for fixing on MCB DB of capacity 6 to 30 Amps complete all as specified and as directed. |
| 97 | S&F MCB, Single pole & neutral, 5 to 32 amps, 240 volts, 'C' curve, 10KA all complete all as specified and as directed |
| 98 | S&F of ceiling fan with all accessories 230 volts 1200 mm sweep BEE 5 Star Rated conforming to IS-374 :1979 complete pre-wired with three core cable all as specified and as directed by Engr-in-charge. |
| 99 | M&L for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick buried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised iron strip 25mm x 4mm by means of nuts, bolts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No-3 of SSR Part-I including necessary excavation and earth work, PCC 1:2:4 type C-1 with 50mm thick pre-cast RCC cover 1:2:4 type B-1 cover slab reinforced with 8 mm dia TMT bar @ 15cm C/C both ways with suitable handle of 10mm dia MS rod including providing charcoal or coke & common salt in alternate layer of 15cm compacted thickness all around the earth electrode with funnel and 10mm bore (light grade GI watering pipe wire mesh, aluminium lugs complete in all respect GI earth wire protected by 40mm bore GI pipe and other end connected with main switch/ earth test pont, including dismantling old unserviceable earth pit complete all as specified and as directed. |
| 100 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed. |
| 101 | Taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at the the site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed. |
| 102 | S&F exhaust fan, steel body AC single Phase. 230V of size 450m sweep with, blades, and frame and louvers, 900 rpm. Heavy duty with and including Cutting of hole in brick wall for fixing of exhaust fan,necessary plastering and make good the disturbed surface & finishing the same with existing finishes complete all as specified and directed. |
| 103 | Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated PVC bedded,galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 10 sqmm 2.0 core with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. ( NOTE: Earthwork & Excavation, Gl pipe, bricks for protection etc shall be measured and paid separately under relevant items of this schedule 'A'). |
| 104 | M&L providing sand cushioning for protection of UG cable (8 cm deep before laying & 15 cm above the top edge of cable after laying) in trenches with dry (coarse) sand approved quality including filling, spreading and punning down to desired thickness complete all as specified & as directed. (NOTE : Punned thickness of 18 cm only shall be considered for payment purpose) |
| 105 | Supply and laying sub class B bricks available best quality brick in trenches for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed. |
| 106 | M&L horizontal boring of holes, under road/ pavement / hard standing etc. not exceeding 10 Meters in length, in any type of soil, suitable for passing through up to 40 mm bore, galvanised steel tubing complete all as specified and as directed.Notes :- (a) Pipe shall be measured and paid separately under relevant item of this schedule.(b) Removal of surplus soil shall be deemed to be included in the Unit Rate. |
| 107 | S&F Galvanised mild steel pipe/tubing, light grade complete with all fittings of 32 mm bore dia, laid in trenches / under roads, fixed to poles/ walls with Mild steel clamps, bolts, nuts and washers as in cable protection complete all as specified and as directed. |
| 108 | Taking out old unserviceable cable of any size carefully from trenches ofter disconnecting electric connection, Gi pipe protection, with and including separating serviceable bricks & set aside and removing un-serviceable bricks from site complete all as specified and as directed. Note: The Excavation and earth work shall be mesured and paid separately under relevant item of Schedule. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 12, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 24 daysNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender