Bids Are Invited For Sr80-001-00001 2 Precracking Of Fracture Toughness (Ft) Testing Sample As Per Astm E399 (Ct Specimen), Test Temperature: Room Temperature Size: 7.8Mm, 12.5Mm, 20Mm, 25Mm Thick Specimens Sample Drawing As Per Annexure-1(D). 1 Sr80-001-

Sharing tender

Bids Are Invited For Sr80-001-00001 2 Precracking Of Fracture Toughness (Ft) Testing Sample As Per Astm E399 (Ct Specimen), Test Temperature: Room Temperature Size: 7.8Mm, 12.5Mm, 20Mm, 25Mm Thick Specimens Sample Drawing As Per Annexure-1(D). 1 Sr80-001-00001 Pulling Of Fracture Toughness Testing Samples As Per Astm E 399 (Ct Specimen), Test Temperature: Room Temperature, Size: 7.8Mm, 12.5Mm, 20Mm, 25Mm Thick Specimens Ft Shall Be Reported Along With Validity / Invalidity Criteria. Sample Drawing As Per Annexure-1(D). Sr80-001-00001 J-Integral Fracture Toughness Test As Per Astm E1820 Test Temperature: Room Temperature Sample Drawing As Per Annexure-1(D). 3 4 Sr80-001-00001 5 Axial High Cycle Fatigue Testing, With R Ratio 0.1, Frequency: 20Hz Or 30Hz (Max Frequency Of Machine Is Desired, However Required Frequency Will Be In The Route Card), Test Temperature: Room Temperature, Testing Standard: Astm E466. No Of Cycles: 107 Or Till Failure Whichever Is Earlier. Sample Dra 5 Sr80-001-00001 Axial High Cycle Fatigue Testing At Temperatures Upto 950°C As Per Astm E466 No Of Cycles: 107 Or Till Failure Whichever Is Earlier. Sample Drawing As Per Annexure-1(E). 6 7 8 Sr80-001-00001 (Testing Machine Shall Have A Capacity From Okn To 1000Kn) Tensile Testing At Room Temperature As Per Astm E8/E8M/A370 Etc, Sample Drawing As Per Annexure-1(F). Sr80-001-00001 High Temperature Tensile Testing Upto 500°C As Per Astm E21, (Testing Machine Shall Have A Capacity From Okn To 180Kn. Sample Drawing As Per Annexure-1(F). Sr80-001-00001 High Temperature Tensile Testing From 501°C To 1000°C As Per Astm E21, (Testing Machine Shall Have A Capacity From Okn To 100Kn. Sample Drawing As Per Annexure-1(F). 9 Sr80-001-00001 Tensile Testing Upto (-70°C), As Per Iso 6892-3 Sample Drawing As Per Annexure-1(F). Etc.