Tender For Development & Repair Of Road (I) Srishti Club Connectivity & Its Extension (Ii) Pec Batta Road & Its Allied Extension Under annual maintenance contract Ward No. 35 /Sh:- Patch Soling, cement concrete Road, Drainage Work , Toe Wall, & Other
Tender Overview
Project Description
Tender for Development & Repair Of Road (I) Srishti Club Connectivity & Its Extension (Ii) Pec Batta Road & Its Allied Extension Under annual maintenance contract Ward No. 35 /Sh:- Patch Soling, cement concrete Road, Drainage Work , Toe Wall, & Other Allied Works Etc.
BOQ
| Sl. No. | Item Description |
| 1 | Flat Brick solingProviding and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 KN as per MoRD Technical Specification Clause 412. |
| 2 | Brick on edge solingProviding and laying brick on edge soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with sand, watering and rolling the same with three wheeled road roller 80-100 KN as per MoRD Technical Specification Clause 412. |
| 3 | Brick edging laid length wiseProviding and laying brick edging laid lengthwise on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 KN as per MoRD Technical Specification Clause 412. |
| 4 | Maintenance of Earthen shoulder (Stripping of excess soil) Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at OMC as per drawing and MoRD technical specification Clause 1903. |
| 5 | Excavation for Structures B)With dewateringEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, dewatering, construction of shoring, shuttering & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material.I) Ordinary Soili) Upto 3 m depth |
| 6 | Sand fillingFilling in foundation trenches as per drawing & MoRD technical specification Clause 305.3.9, 1200I. Sand filling |
| 7 | PCC M-10 in open foundationProviding concrete for plain/reinforced concrete in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900,1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement).I) P.C.C grade M 10(i) Nominal mix 1:3:6 |
| 8 | PCC M-20 in open foundationProviding concrete for plain/reinforced concrete in open foundations complete including formwork as per drawings& MoRD technical specifications Clauses 802, 803, 900,1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement).III) P.C.C grade M 20(i) Nominal mix (1:2:4) |
| 9 | Brick masonry workBrick masonry work in cement mortar in foundation completed excluding pointing & plastering as per drawing & MoRD technical specifications Clauses 600, 1202 & 1203.i) Brick masonry in 1:4 cement mortar |
| 10 | 12 mm Plastering in substructurePlastering with cement mortar (1:4) 12 mm thick on brickwork/ C.C. work including a finishing coat of neat cement punning with 2.75 kg of cement per sqm in substructure as per MoRD technical specification Clauses 613.4 & 1204. |
| 11 | RCC M-20 in foundationProviding concrete for plain/reinforced concrete in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement).IV) R.C.C grade M 20 |
| 12 | TMT bar in open foundationSupplying, fitting & placing Thermo Mechanically treated bar/ Cold twisted deformed steel bar reinforcement in foundation complete as per drawings & MoRD technical specifications Clauses 1000 & 1202. |
| 13 | Weep holesProviding weep holes in brick masonry/ stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe or uPVC pipe (110 mm OD of 6.0 kg/cm2 pressure) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and MoRD technical specification clauses 614, 709, 1204.3.7. |
| 14 | Filter media with jhama brick aggregateProviding & laying filter media with jhama brick aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil & bigger size towards the wall & providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and MoRD technical specification clause 1204.3.8. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender