Tender For Maintenance / Repair / Polshing / Painting Of Chair Verandah Officers, Chair Dining With Cushion And Revolving Chair Under Bso Of Ge(S) Bathinda At Bathinda Mil Stn
Tender Value
45 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
12 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance / Repair / Polshing / Painting Of Chair Verandah Officers, Chair Dining With Cushion And Revolving Chair Under Bso Of Ge(S) Bathinda At Bathinda Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparation of old steel surface of chair verandah and welding loose joints, if any including de-rusting the surface and painting with one coat of synthetic enamelled paint white colour (1st Grade Quality) and recaning with 4-5 mm half round 0.6 thick plastic cane made out of virgin plastic, in existing pattern complete.Rest all as specified and directed by engr-in-charge. (Drg No. FD-359/256/19 ) |
| 2 | Re-caning seat / back. |
| 3 | S&F PVC shoe suitable for chair verandah of approved quality. |
| 4 | M&L for preparation of old steel surface of chair verandah (MAP) and welding loose joints, if any including de-rusting the surface and painting with one coat of synthetic enamelled paint white colour (1st Grade Quality) and fixing PVC seat and back 4mm thick with wt not less than 1.85 kg and grooves 90x10mm 10 Nos on seat and back of approved quality.Rest all as specified and directed by engr-in-charge. ( Drg No. FD/MAP-II/06) |
| 5 | S & F of flat iron stiffener of size 25mmx5mm thick beneath the seat of chair Verandha (MAP) of suitable length to support to seat of chair Verandah (MAP) duly painted with two coat of synthetic enamel paint white colour (Ist Gde quality) over a coat of Red oxide primer complete all as specified and directed. |
| 6 | S&F PVC shoe suitable for chair verandah of approved quality. |
| 7 | M&L for taking out u/s iron strips from Chair Verandah Offrs and S & F new strip of size 60mm wide x3mm thickness of appropriate length to chair verandha complete all as specified and directed by Engr -in - Charge. (Drg No.FD/E6/MAP/11) duly painted with two coat of synthetic enamel paint black colour (Ist Gde quality) over a coat of Red oxide primer complete |
| 8 | M&L repairs to Chair computer/chair revolving (made out of tapestry cloth) by replacing unserviceable parts as per drawings/TP. Rest all as directed by engr-in-charge. (Drg No.FD/E6/MAP/01,TP) |
| 9 | Only tapestry cloth of seat and back complete. |
| 10 | Tapestry cloth and foam of seat/ back complete. |
| 11 | Only Plywood of seat /back. |
| 12 | Hydraulic of suitable size. |
| 13 | Push back plate complete all as specified and directed |
| 14 | Base PVC/Iron of suitable size and pattern. |
| 15 | Wheel of suitable size and pattern. |
| 16 | Arms as requred by size and design. |
| 17 | Note:- sample and shade of materials will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 250/-per meter. |
| 18 | M&L to repairs Chair dining by replacing the following unserviceable parts with first class teak wood/approved ones. Rest all as per drawing & as directed.(DRG NO. FD-1105/279/270/262/228/203) |
| 19 | Front leg. |
| 20 | Rear leg. |
| 21 | Stiffener. |
| 22 | back rest. |
| 23 | rail. |
| 24 | S&F PVC shoe 15mm dia of approved quality. |
| 25 | M&L to repair Chair dining by replacing old plastic cane with new cane of 2 to 2.5 mm width and 0.4mm thick of approved quality. Border of chair shall be caned with 4mm wide and 0.6mm thick cane. |
| 26 | Removing of old wooden polish from complete surfaces of Chair dinning (FD-203/228/262/270/279/1105), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till high gloss finish is achieved complete all as specified and directed. |
| 27 | M&L to repair Chair easy by replacing the following unserviceable parts with first class teakwood.Rest all as per drawing and as directed by engr-in-charge.(DRG NO. FD-229/201) |
| 28 | Frame front/back of seat |
| 29 | Frame side of seat. |
| 30 | Frame top/bottom of back. |
| 31 | Frame side of back. |
| 32 | Rail. |
| 33 | S&F PVC shoe 15mm dia of approved quality. |
| 34 | M&L to repair Chair easy by replacing old plastic cane with new cane of 2 to 2.5 mm width and 0.4mm thick of approved quality. Border of chair shall be caned with 4mm wide and 0.6mm thick cane. |
| 35 | Removing of old wooden polish from complete surfaces of Chair Easy (FD-17/201/229/1108), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till high gloss finish is achieved complete all as specified and directed. |
| 36 | M&L to repair Chair writing by replacing the following unserviceable parts with first class teak wood. Rest all as per drawing & as directed by engr-in-charge.(DRG NO. FD-280/250) |
| 37 | Front leg. |
| 38 | Rear leg. |
| 39 | Stiffener. |
| 40 | Back rest. |
| 41 | Rail. |
| 42 | S&F PVC shoe 15mm dia of approved quality. |
| 43 | M&L to repair Chair writing by replacing old plastic cane with new cane of 2 to 2.5 mm width and 0.4mm thick of approved quality. Border of chair shall be caned with 4mm wide and 0.6mm thick cane. |
| 44 | Removing of old wooden polish from complete surfaces of Chair writing (FD-280/250), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till high gloss finish is achieved, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender