Tender For Repair Of Steel Furniture Under Bso Of Ge(S) Bathinda At Bathinda Mil Stn
Tender Value
45 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
14 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Steel Furniture Under Bso Of Ge(S) Bathinda At Bathinda Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | M&L to repair Almirah steel large/Almirah steel 1/2H 1/2shelf by replacing the following unserviceable parts with approved ones.Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-1031/ 67(M))/FD/E6/MAP/18) |
| 2 | MS lock 6 lever with duplicate key. |
| 3 | Chromium plated handle 150mm long. |
| 4 | Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer. |
| 5 | Rod made out of 1\\" round shape of stainless steel as per FD mentioned in Ser No 1.01 |
| 6 | Shelves made out of 1mm thick MS sheet duly painted with one coat of red oxide primer as per FD mentioned at Ser No 1.01 |
| 7 | Preparation of old painted iron & steel surface (externally and internally complete) of Almirah large steel (FD-1031/67(M)/FD/E6/MAP/18) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. |
| 8 | Note:- Pattern and shape of lock, handle and rod will be determined as per actual requirement at site. |
| 9 | M&L to repair Almirah medium/small steel by replacing the following unserviceable parts with approved ones.Rest all as per the drawings and directed by Engr-in-charge.(DRG NO. FD-1032/243/67M)) |
| 10 | MS lock 6 lever with duplicate key. |
| 11 | Chromium plated handle 150mm long. |
| 12 | Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer |
| 13 | Shelves made out of 1mm thick MS sheet duly painted with one coat of red oxide primer as per FD mentioned at Ser No 2.00 |
| 14 | Note:- Pattern and shape of lock and handle will be determined as per actual requirement at site. |
| 15 | Preparation of old painted iron & steel surface (externally and internally complete) of Almirah med steel (FD-1032/243/67(M)) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. |
| 16 | M&L to repair Locker steel by replecing the following parts with approved ones.Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-257/1029) |
| 17 | Chromium plated hasp and staple 75mm long. |
| 18 | Chromium plated handle 100mm long. |
| 19 | Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer |
| 20 | MS hinge 75mm long. |
| 21 | Preparation of old painted iron & steel surface (externally and internally complete) of Locker steel (FD-1029/257) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. |
| 22 | M&L to repair Table 900mm x 600 mm with drawer by replacing the following parts with approved ones as mentioned below and as per the drawing and directed by Engr-in-charge. (DRG NO. FD-1008 ) |
| 23 | MS lock of suitable size with duplicate key. |
| 24 | PVC handle of approved quality suitable for drawer. |
| 25 | Making the drawer functional by removing dents from MS sheet align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete. |
| 26 | Top (910mm x 610mm) made out of 18mm thick pre-laminated MDF board (exterior gde) one side classic walnut face and balancing white on other side duly teakwood beading 4x18/19mm all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge. |
| 27 | S&F PVC/hard rubber toe of approved quality and suitable size. |
| 28 | Preparation of old painted iron & steel surface (externally and internally complete) of Table 900x600x760mm with drawer steel (FD-1008) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of Table 900x600x760mm with drawer steel if any shall be melamine polished with high gloss finish. |
| 29 | M&L to repair Table 900mm x 600mm without drawer steel by replacing the top (910mm x 610mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of melamine polish. Rest all as per the drawing and directed by Engr-in-charge. (DRG NO. FD-1007 ) |
| 30 | S&F PVC/hard rubber toe of approved quality and suitable size. |
| 31 | Preparation of old painted iron & steel surface of Table 900x600x760mm w/o drawer steel (FD-1007) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of Table 900x600x760mm w/o drawer steel shall be lacquer polished with high gloss finish. |
| 32 | M&L to repair Table 900mm x 900mm steel by replacing the top (910mm x 910mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of melamine polish. Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-1009 ) |
| 33 | S&F PVC/hard rubber toe of approved quality and suitable size. |
| 34 | Preparation of old painted iron & steel surface of Table 900x900x760mm steel (FD-1009) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of Table 900x900x760mm steel shall be lacquer polished with high gloss finish. |
| 35 | M&L to repair Teapoy verandah by replacing the top (910mm x 460mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of lacquer polish. Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-255 /208/ 35 ) |
| 36 | S&F PVC toe for teapoy verandah of approved quality and suitable size. |
| 37 | Preparation of old painted iron & steel surface of Teapoy Verandah (FD-255 /208/ 35) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. |
| 38 | M&L to repair Teapoy verandah (MAP) by replacing the top (760mm x 460mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of lacquer polish. Rest all as per the drawing and directed by Engr-in-charge. (DRG NO.FD/E6/MAP/17 ) |
| 39 | S&F PVC/Hard rubber toe for teapoy verandah (MAP) of approved quality and suitable size. |
| 40 | Spot welding on various items of steel furniture FD/TP |
| 41 | Preparation of old painted iron & steel surface of Teapoy Verandah (FD/E6/MAP/17) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of Teapoy Verandah shall be melamine polished with high gloss finish. |
| 42 | M&L to repair Table clerk (steel) by replacing the following parts with approved ones.Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-1004/381/307/84(M)). |
| 43 | MS lock of suitable size with duplicate key. |
| 44 | S&F PVC handle of approved quality suitable for drawer. |
| 45 | Making the drawer functional by removing dents from MS sheet align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete. |
| 46 | Top (1220mm x 610mm) made out of 18mm thick pre-laminatedexterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners . Rest all as per the drawings and directed by Engr-in-charge. |
| 47 | S&F PVC/Hard rubber toe of suitable size. |
| 48 | Preparation of old painted iron & steel surface (externally and internally complete) of Table office clk steel (FD-1004/381/307/84(M)) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of Table office clk steel shall be lacquer polished with high gloss finish. |
| 49 | M&L to repair Table officer (steel) by replacing the following parts with approved ones.Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-1003/84(M)). |
| 50 | MS lock of suitable size with duplicate key. |
| 51 | S&F PVC handle of approved quality suitable for drawer. |
| 52 | Making the drawer functional by removing dents from MS sheet align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete. |
| 53 | Top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge. |
| 54 | S&F PVC/Hard rubber toe of suitable size. |
| 55 | Preparation of old painted iron & steel surface (externally and internally complete) of Table office offrs steel (FD-1002/1003/84(M)) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of Table office offrs steel shall be melamine polished with high gloss finish. |
| 56 | M&L to repair Table bed side (MAP) by replacing the following parts with prelaminated MDF board(exterior gde)/plywood BWR gde. Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD/E6/MAP/15, FD/E6/MAP/15(R)) |
| 57 | Top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side duly provided with teakwood beading of suitable size. |
| 58 | Side made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Naina teak/ Classic walnut face and balancing white on other side complete. |
| 59 | Back made out of plywood 6mm thick BWR Gde. |
| 60 | Upper drawer complete excluding handle. |
| 61 | Lower drawer complete excluding handle. |
| 62 | CP handle 100mm long of approved quality. |
| 63 | S&F PVC/Hard rubber toe of suitable size. |
| 64 | Preparation of old painted iron & steel surface of Table bed Side MAP (FD/E6/MAP/15(R) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. Note :- Wooden portion of Teapoy Verandah shall be lacquer polished with high gloss finish. |
| 65 | M&L to repair Table computer by replcing the following parts with prelaminated exterior gde MDF board OSL (Designation PLMDF-12).Rest all as per the drawings and as directed by Engr-in-charge. (DRG NO.FD/E6/MAP/03,TP) |
| 66 | Top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side duly provided with teak wood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. |
| 67 | Side made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side naina teak/Classic walnut face and balancing white on other side complete. |
| 68 | All as per item no 12.01 but Key board tray complete excluding telescopic channel |
| 69 | All as per item no 12.01but pull out tray complete excluding telescopic channel. |
| 70 | All as per item no 12.01 but drawer complete excluding knob. |
| 71 | All as per item no 12.01 but middle shelf including vertical portion complete. |
| 72 | All as per item no 12.01 but bottom shelf complete. |
| 73 | Telescopic channel of suitable size and approved quality. |
| 74 | Note:- Sample and shade of materials will be determined as per actual requirement at site. |
| 75 | Preparation of old painted iron & steel surface of Table computer (FD/E6/MAP/03,TP) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. |
| 76 | M&L to repair Table dining OR Steel by replacing the top (size 1900x685mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of lacquer polish. Rest all as per the drawing and directed by Engr-in-charge. (DRG NO. FD-165(M) ) Please Enable Macros to View BoQ information |
| 77 | M&L to repair Table dining OR Steel by replacing the top (size 1900x685mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of lacquer polish. Rest all as per the drawing and directed by Engr-in-charge. (DRG NO. FD-165(M) ) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender