Tender For Improvement/Augumentation Of Water Pumps & Submersible Pump Sets For Water Distribution Installed At Kasturba Hospital.
Tender Value
11.40 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
5 days left
EMD
22813
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement/Augumentation Of Water Pumps & Submersible Pump Sets For Water Distribution Installed At Kasturba Hospital.
BOQ
| Sl. No. | Item Description |
| 1 | Supply & Drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required. |
| 2 | 6x6 sq.mm. |
| 3 | P & F of 6 SWG dia.G.I. wire on surface or in recess for loop earthing along with existing surface/recessed conduit/submain wiring/cable as reqd. |
| 4 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 5 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 6 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : |
| 7 | 50mm dia |
| 8 | 65 mm dia |
| 9 | 80 mm dia |
| 10 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : |
| 11 | 50mm dia |
| 12 | 65mm dia |
| 13 | 80mm dia |
| 14 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 15 | 8 Way, Double Door |
| 16 | Supplying and fixing 5 A to 32 A rating, 240/415V,10 KA, \\"C\\" curve miniature circuit breaker suitable for inductive load of following pole in the existing MCB DB complete with connection testing and commissioning etc, as required. |
| 17 | Single Pole |
| 18 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 19 | 63 Amp. |
| 20 | Supply and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connection, testing and commissioning etc, as required. |
| 21 | 63 Amp. |
| 22 | 100 Amp. |
| 23 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminalspreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 24 | 100 Amp.16 KA,TPMCCB |
| 25 | 200 Amp.16 KA,TPMCCB |
| 26 | 250 Amp.25 KA,TPMCCB |
| 27 | Lifting the existing submersible accessories pump set with its all accessories from well and lowering the same along with all for the depth up to 50 to 100 meter complete as reqd. |
| 28 | Rewinding of single / three phase A.C. motors of vertical type multi stage submersible pump set of following ratings:- |
| 29 | Three phase 5 HP, |
| 30 | Repairing of the Pumping unit of 5/7.5/10 HP vertical type, multistage, submersible pump set by replacement of following accessories/ parts etc compete as reqd. |
| 31 | Gun Metal Bush /Bearing |
| 32 | Pump Shaft |
| 33 | Impeller |
| 34 | Supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd |
| 35 | Three Phase 5.0 HP having discharge of 300 LPM Approx. at 39 M Head. |
| 36 | Supply, Installation, testing and commissioning of cubical type control panel board for single phase & Three Phase submersible pumping set of following rating complete with contactor, relay , MCB ,condenser ,voltmeter, ammeter and indication lamp etc including connections etc as reqd. |
| 37 | 5 HP (Three Phase) |
| 38 | S & F MS clamp made up of iron flat of size 50X6 mm with 4 nut bolt for holding the GI pipe pipe as reqd. |
| 39 | 50 mm |
| 40 | P&F following sizes of PVC insulated & PVC sheathed copper conductor 3 core submersible cable confirming to IS.694/1990 etc. as reqd. |
| 41 | 3x 6 sq.mm |
| 42 | Supplying and fixing following sizes of insulated steel flexible safety rope for holding submersible pump set i/c clips etc complete as reqd. |
| 43 | 10 mm |
| 44 | Development of tube well with suitable capacity of air compressor i/c lowering of the necessary induction pipe or line i/c cost of fuel, hire charges of compressor etc as reqd. The development shall be considered complete when Gravel stop sinking, Discharge ceased to improve and the sand contents are not more than 10 PPM after 20 minutes of starting the pump complete as reqd. |
| 45 | SITC of Pillar box size 900 mm x 450mm x 250mm suitable for mounting incomer of 250 A MCCB/Main switch 4 Pole and energy meter 3 phase complete with eleethoypic grade Aluminium bus bar of size 25mm x 19 mm mounted on galvanized M. S. body power quoted pilferage proof SMC door duly welded with S.S. with rain cover size 40mm x 40mm x 5mm x 600mm height in cutting 300 mm height below ground and covered with shode proof SMC sheet of 3 mm as required. |
| 46 | Supplying, lowering and lifting, testing and commissioning of following size of mono submersible pump set motor including as required. (b) 15 HP three phase having discharge of 500-3600 LPM Approx. at 30-56 M Head. |
| 47 | S/I/T/C of cubical type control panel board for three phase star delta starter, three position selection with auto switch for Mono submersible pumping set of following rating complete with single phasing preventer in auto, contactor (25Amp), O/L relay TP, MCB, Voltmeter, ammeter, VSS and indication lamp etc. including lamp etc. including connection etc. as required. (b) 15 H.P. rating Submersible Pump Set Over Load relay (range30-32 Amp) & Contactor (range 32 Amp) |
| 48 | Supply, lowering and fixing following size of G.I. Pipe (M-Class) i/c cutting threading on both sides etc. ISI marked etc as reqd. |
| 49 | 50mm(Nominal Bore) |
| 50 | 65mm(Nominal Bore) |
| 51 | 80mm(Nominal Bore) |
| 52 | S & F following size of G.I. Socket. as reqd. |
| 53 | S & F following size of G.I. Union. as reqd. |
| 54 | S & F following size of G.I. Elbow. as reqd.. |
| 55 | Supply of CI foot valve 75 mm complete as required |
| 56 | Supply of CI nipple 75 mm complete as required |
| 57 | Supply,Installation, testing and commissioning of power distribution board made out of 1.6 mm sheet steel, epoxy powder coated , specially designed Al bus bar 400A to 630A with heat shrinkcable colour coated sleeves suitable for accommodating MCCBs/MCBs /Isolators as incoming and outgoing as required (without MCCBs/MCBs/Isolators ) complete with digital meter module, including Voltmeter Ammeter with selector switch, CTs control fuse and indicating lights including connections etc. as required ( Conforms to IS:8623) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender