Tender For Addition/Alteration Of Asbestos Sheet With Galvalume Sheet And False Ceiling In Bldg No Ht-71 (Cook House) Under Ge (South) Ambala Cantt.
Tender Value
9.20 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
20 days left
EMD
18400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/Alteration Of Asbestos Sheet With Galvalume Sheet And False Ceiling In Bldg No Ht-71 (Cook House) Under Ge (South) Ambala Cantt.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar including all quoins arches and pillars etc complete all as specified and directed by Engineer-in-Charge. |
| 2 | Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6), with necessary scaffolding etc complete all as specified and directed by Engineer-in-Charge. |
| 3 | Taking down cement plaster from brick or concrete surfaces including raking out joints,hacking for keys, scrubbing down with water etc. complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material and labour for 15 mm thick rendering on brick or concrete surfaces in Cement mortar 1:4 with , finishing the surface even and fair without using extra cement. complete all as specified and directed by Engineer-in-Charge. |
| 5 | Material and labour for two coats of cement base paint over a coat of alkali resistant primer including preperation of new surfaces of walls complete all as specified and directed by Engineer-in-Charge. |
| 6 | Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge. |
| 7 | Supply and fixing for prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridge, valley gutter etc fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 8 | Supply and fixing for prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridge, valley gutter etc fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 9 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engineer-in-Charge. |
| 10 | Material and labour for Roof Trusses (framed) , trussed , rafter,purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. FE 410-w(GdeE-250) quality A complete all as specified by Engineer-in-Charge. |
| 11 | Material and labour for two coat of synthetic enemal paint over a coat of zinc choome primer on new steel surfaces of any description, over 10cm in width or girth,not otherwise described including preparation of surfaces complete all as specified and directed by Engineer-in-Charge. |
| 12 | Supply and fixing of metal false ceiling at all heights of perforated with fleece 595 mm x 595 mm x 0.5 mm TEGULAR EDGE TILES in global white powder quoted with 60-70 micron front coating and including regular 24 mm wide T-section flange colour white having rotary stitching on the main runner with web height 26 mm, exposed grid system including frame work comprises of main runner spaced at 1200 mm max (centre to centre), hangers with GI wire to be fixed by hiliti consisting of HLS sleeve anchor fastencer of thread size 6.5 mm x 25/5 with soffit cleat made of galvinised steel of size 27 mm x 37mm x 25mm x 1.6mm and level clip in dimensions of 85mmx30mm 0.8mm at 600x1200 intervals. The last hanger at the end of each main runner shoud not be greater than 450 mm from the adjacent wall. Flush fitting 1200 mm long cross tees (with double stiching) to be interlocked between main runner at 600 mm shall be 'T'shape section with single rotary stitching made of GS sheet and of size 15 mmx32mm and 3000mm long, crosssed runner shall be 'T' shaped with double rotary stiching made of GS sheet and size 15 mmx 32mm x 1200 mm long and perimeter wall angle shall be made from GS sheet and of size 19mm x 19mm and 3000mm long, colour white, centre to form 600 mm x 600 mm modules, cut cross tees longer than 600 mm to be supported independently, 600mm x 600mm modules to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.Perimeter trim to be wall angles of size 3000x22x22mm, secured to walls at 450mm max (centre to centre), complete including taking down existing ceiling boards (fibre, pulp, insulation etc) or insulation boards/slab etc ant thickness including cover fillets of any description complete all as specified by Engineer-in-Charge.NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed. |
| 13 | Dismantling floor, hearth or wall tiling/stone including cement mortar bedding (but not backing) removing debris out side defence area complete all as specified and directed by Engineer-in-Charge. |
| 14 | Material and Labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick light shade/colour tile (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed 15mm thick in screed bed (1:6) base, complete all as specified and directed by Engineer-in-Charge. |
| 15 | Material and Labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick light shade (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting/dado etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade selected quality laid over and including 10mm thick screed bedding layer in CM (1:3) make and sample as approved by GE/Engr-in-charge, complete all as specified and directed by Engineer-in-charge. |
| 16 | NOTE:- Amount of credit of Rs. 37,505.00 for retrieved materials is mentioned in Schedule of Credit Page No 19 of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender