Tender For Repair/Maintenance And Polishing To Wooden Furtiuture For Otm And Md Accn Under Ge (South) Ambala Cantt.
Tender Value
28 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
14 days left
EMD
56000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance And Polishing To Wooden Furtiuture For Otm And Md Accn Under Ge (South) Ambala Cantt.
BOQ
| Sl. No. | Item Description |
| 1 | SOFA SET FIVE AND FOUR SEATER (FD-85, 258 & 281) |
| 2 | Taking out unserviceable foam cushion seat & back from sofa set to seat five FD-281 and Supply & fixing of new foam cushion seat & back of size 530x560x100mm thick 32 density, duly covered with tapestry cloth, colour, quality and shade as approved by GE, matching with existing shape and size all as shown in Drawing complete all as specified and as directed by Engineer-in-Charge. NOTE : - Cushion and cloth will be supplied/dumped in advance before commencement of work alongwith purchase voucher. |
| 3 | Taking out unserviceable foam cushion seat & back from sofa set to seat Four FD-281and supply & fix new foam cushion seat & back of size 530x560x100mm thick 32 density, colour, quality and shade as approved by GE/Engr-in-Charge. matching with existing shape and size all as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. Note: Cushion and cloth will be supplied/dumped in advance before commencement of work alongwith purchase voucher. |
| 4 | Taking out unserviceable tapestry cloth from old sofa cushion of size 530x560x100mm and Supply & fixing of new tapestry cloth colour, quality and shade as approved by GE on good quality cushion, matching with existing shape and size all as shown in Drawing complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Taking out unserviceable front rail from sofa set to seat five and supply and fixing of new front rails of three seater sofa made out of 1st class hard wood (Seasoned wood) matching with existing shape and size all as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 6 | Taking out unserviceable back rail from sofa set to seat five and supply and fixing new back rails of three seater sofa made out of 1st class hard wood (Seasoned wood) matching with existing shape and size all as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 7 | Taking out unserviceable Arms from sofa set to seat four & five and supply and fixing new Arms made out of 1st class hard wood (Seasoned wood) matching with existing shape and size all as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 8 | Taking out unserviceable side,front and back rail from sofa set to seat four & five and supply and fixing newside,front and back rail made out of 1st class hard wood (Seasoned wood) matching with existing shape and size all as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 9 | BED WITH PLYWOOD TOP (FD-246 & 247) |
| 10 | Taking out unserviceable long rail from bed with plywood top and Supply & fixing of new long rail made out of well seasoned first class hard wood of size 1980x90x35mm, matching with the existing shape & size, all as shown in Drawing complete all as specified and as directed. |
| 11 | Taking out unserviceable head board from bed with plywood top and Supply & fixing of new head board made of well seasoned first class hard wood and plywood commercial 3.5mm thick one side teak face exterior grade BWR as per IS code 303, duly covered with 4 mm thick teak wood beading all around, matching with the existing shape & size, all as shown in Drawing complete all as specified and as directed by Engineer-in-Charge. |
| 12 | All as per Item ser No 2.02 but foot board, complete all as specified and directed by Engineer-in-Charge. |
| 13 | Taking out unserviceable plywood & stiffener from bed with ply top Supply & fixing of new stiffner made of well seasoned first class hard wood alongwith plywood 12mm thick exterior grade BWR as per IS code 303 ,Matching with the existing shape & Size, all as shown in Drawing complete all as specified and as directed by the Engineer-in-Charge. Note: (i) plywood will be dumped in advance before commencement of work along with purchase voucher. (ii)Payment will be processed after fulfilling following condition:-(a) Verification of purchase voucher of plywood.(b) Certification of plywood supplied on ground that plywood supplied is complying CA all as per specifications by manufacturers.(c) Submission of test certificate of plywood from contractor. |
| 14 | TABLE 900 X 600 X 760 MM WITH / WITHOUT DRAWER (FD-223, 284, 224 & 283) |
| 15 | Taking out unserviceable top from Table 900x600x760mm with/without drawer and Supply and fixing new top made of pre-laminated particle board 18 mm thick exterior grade BWR one side teak face as per IS CodeNo-12823 duly covered with 4mm thick teak wood beading all around the top, matching with the existing shape and size, all as shown in drawing complete all as specified and as directed by Engineer-in-Charge. |
| 16 | Taking out unserviceable leg of table and Supply and fixing new leg of table 900x600mm made out of well seasoned first class hard wood and shape size as per drawing complete all as specified and as directed by Engineer-in-Charge. |
| 17 | Taking out unserviceable front/back rail of table and Supply and fixing new front/back and side rail of table 900x600mm without drawer made out of well seasoned first class hard wood and shape size as per drawing complete all as specified and as directed by Engineer-in-Charge. |
| 18 | Taking out unserviceable Drawer of table 900x600mm with Drawer and S/F new Drawer of same shape size as per drawing complete all as specified and as directed by the Engr-in-Charge. |
| 19 | TABLE CENTRE AND TABLE CENTRE TWO TIER(FD-29 (M), 235 & 274) FD/MAP/08 |
| 20 | Taking out unserviceable Top from Table centre and tavke centre two tier and Supply and fixing new Top made of 18mm thick exterior grade BWR as per IS code 12823 pre-laminated /artical board duly covered with 4mm thick teak wood beading all around the top,matching with the existing shape and size, all as shown in drawing complete all as specified and as directed by the Engr-in-Charge. |
| 21 | Taking out unserviceable Leg of Table Center and table center two tier and supply and fixing new Leg of same shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 22 | Taking out unserviceable front, back and side rails of Table Center and table center two tier and supply and fixing new front, back and side rails of same shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 23 | Taking out unserviceable bottom stiffner of Table Center and table center two tier and supply and fixing new bottom stiffnerof same shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 24 | TABLE DINNING 6 AND 8 person (FD-239, 273 & 30), FD/MAP/09 |
| 25 | Taking out unserviceable top of Table Dinning 6 personon and Supply & fixing of new top made of plywood thick exterior grade of 18mm BWR grade with sunmica (1mm thick) as per IS 303. duly covered with 4mm thick teak wood beading all around the top, matching with the existing shape and size, all as shown in Drawing complete all as specified and as directed by Engineer-in-Charge. |
| 26 | Taking out unserviceable top of Table Dinning 8 person and Supply & fixing of new top made of plywood thick exterior grade 18mm BWR grade with sunmica (1mm thick) as per IS 303. duly covered with 4mm thick teak wood beading all around the top, matching with the existing shape and size, all as shown in Drawing complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Taking out unserviceable legs of table dinning 6 & 8 person and supply and fixing new Legs of same shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 28 | Taking out unserviceable front, back & side rail of table dinning 6 & 8 person and supply and fixing new front, back & side rail of same shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 29 | Supply and fixing corner of size 75x75x25mm for tighten the frame of table dinning 6 & 8 person as per Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 30 | TABLE WRITING (FD-249, 275 & 33) |
| 31 | Taking out unserviceable Top from Table Writing and supply and fixing new Top made of pre-laminated pratical board18mm plywood thick exterior grade BWR ISI marked as per IS code 12823 Plylam with sunmica (01mm thick) duly covered with 4mm thick teak wood beading all around the top,matching with the existing shape and size, all as shown in drawing complete all as specified and as directed by the Engr-in-Charge. |
| 32 | Taking out unserviceable legs of table writing and supply and fixing new Leg of same shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 33 | Taking out unserviceable front, back & side rail of table writing and supply and fixing new front, back & side of same shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 34 | Taking out unserviceable drawer and side cabin door front of table writing and supply and fixing new front, back & side of same shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 35 | Taking out unserviceable foot stiffner table writing and supply and fixing new foot stiffner of same shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 36 | TEAPOY WOODEN (FD-232, 278 & 34(M) |
| 37 | Taking out unserviceable Top from Teapoy wooden and Supply and fixing new top made of pre-laminated particle board 18 mm thick exterior grade BWR one side teak face as per IS CodeNo-12823 duly covered with 4mm thick teak wood beading all around the top,matching with the existing shape and size, all as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 38 | Taking out unserviceable legs of teapoy and supply and fixing new Legs of same shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 39 | Taking out unserviceable front/back and side rail of teapoy and S/F new front/back and side rail of same shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge |
| 40 | TABLE PEG (FD-236, 277 & 25), FD/MAP/11 |
| 41 | Taking out unserviceable Top from Table peg and Supply and fixing new top made of pre-laminated particle board 18 mm thick exterior grade BWR one side teak face as per IS CodeNo-12823 duly covered with 4mm thick teak wood beading all around the top,matching with the existing shape and size, all as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 42 | Taking out unserviceable legs of Table Peg and supply and fixing new Legs of same shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 43 | Taking out unserviceable front/back and side rail of Table Peg and supply and fixing new front/back and side rail of same shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge |
| 44 | SIDE BOARD (FD-241) |
| 45 | Material and labour in replacement for top of side board with 18/19mm thick pre laminated particle board one side hard wood including 6mm thick teak wood edging all-round , as per drawing complete, all as specified and directed by Engineer-in-Charge. |
| 46 | Material and labour in replacement for bottom of side board with 18/19mm thick particle board commercial type including 6mm thick teak wood edging all-round , as per drawing complete, all as specified and directed by Engineer-in-Charge. |
| 47 | Material and labour in replacement for door shutter of side board with 18/19 mm thick one side hard wood pre-laminated particle board including CP knob, lock, hinges fixed to each shutter and 6 mm thick teak wood beading all around as per drawing complete all as specified and directed by Engineer-in-Charge. |
| 48 | Material and labour in replacement for drawer of side board including CP knob fixed to each drawer as per drawing complete all as specified and directed by Engineer-in-Charge. |
| 49 | Material and labour in replacement for back side of side board with 9 mm thick commercial ply wood, as per drawing complete, all as specified and directed by Engineer-in-Charge. |
| 50 | Material and labour in replacement for shelf of side board with 18/19 mm thick particle as per drawing board complete, all as specified and directed by Engineer-in-Charge. |
| 51 | Material and labour in replacement for leg of side board of required size made out of well seasoned 1st class Teak wood, as per drawing complete all as specified and directed by Engineer-in-Charge . |
| 52 | BOOK CASE (FD-237) |
| 53 | Material and labour in replacement top/bottom of book case and shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge |
| 54 | Material and labour in replacement back of book case and shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge |
| 55 | Material and labour in replacement side of book case and shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge |
| 56 | Material and labour in replacement of shutter of book case and shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 57 | TABLE DRESSING GENTS WITH MIRROR (FD-230, 379 AND 31, FD/E6/MAP/16) |
| 58 | Taking out unserviceable drawers from table dressing gents and Supply and fixing new drawers made of 12mm thick teak wood except bottom of drawers which shall be of 6mm thick ply wood commercial exterior grade BWR & front of drawers shall be made of 12mm thick pre-laminated particle board one side teak face exterior grade BWR including knob etc. All as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 59 | Taking out unserviceable top from table dressing gents and Supply and fixing new top made of 12mm thick pre-laminated particle board one side teak face exterior grade BWR duly covered with 4mm thick teak wood beading all around the top. All as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 60 | Taking out unserviceable bottom from table dressing gents and Supply and fixing new bottom made of 12mm thick pre-laminated particle board one side teak face exterior grade BWR duly covered with 4mm thick teak wood beading all around the top. All as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 61 | Taking out unserviceable side from table dressing gents and Supply and fixing new side made of 12mm thick pre-laminated particle board one side teak face exterior grade BWR duly covered with 4mm thick teak wood beading all around the top matching with the existing shape & size. All as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 62 | Taking out unserviceable looking mirror from table dressing gents and Supply and fixing new looking mirror 5.5mm thick of size 2'-6\\"x1'-3\\" Goldenfish free from distortion and other defect duly framed with backing plywood, teak wood beading & vertical support etc. All as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 63 | TABLE DRESSING LADIES WITH MIRROR (FD-251,FD-378 AND 32), FD/MAP-II/07 AND FD/MAP/10 |
| 64 | Taking out unserviceable drawers from table dressing ladies and Supply and fixing new drawers made of 12mm thick teak wood except bottom of drawers which shall be of 6mm thick ply wood commercial exterior grade BWR & front of drawers shall be made of 18mm thick pre-laminated particle board one side teak face exterior grade BWR including knob etc. All as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 65 | Taking out unserviceable top from table dressing ladies and Supply and fixing new top made of 18mm thick pre-laminated particle board one side teak face exterior grade BWR duly covered with 4mm thick teak wood beading all around the top. All as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 66 | Taking out unserviceable bottom from table dressing ladies and Supply and fixing new bottom made of 18mm thick pre-laminated particle board one side teak face exterior grade BWR duly covered with 4mm thick teak wood beading all around the top. All as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 67 | Taking out unserviceable side from table dressing ladies and Supply and fixing new side made of 18mm thick pre-laminated particle board one side teak face exterior grade BWR duly covered with 4mm thick teak wood beading all around the top matching with the existing shape & size. All as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 68 | Taking out unserviceable looking mirror from table dressing ladies and Supply and fixing new looking mirror 5.5mm thick 355mmx1220mm free from distortion and other defect duly framed with backing plywood, teak wood beading & vertical support etc. All as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 69 | Taking out unserviceable plain glass pane and Supply and fixing new plain glass pane 4mm thick & standard aluminium channel having two 'U' shaped channel for sliding matching with the existing shape & size. All as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 70 | TABLE BED SIDE (MAP) (FD-248, FD/E6/MAP/15, FD/MAP/07 |
| 71 | Material and labour in replacement for back side of table bed side with 6 mm thick plywood top , commercial type, BWR grade, of required size as per drawing complete all as specified and as directed by the Engr-in-Charge. |
| 72 | Material and labour in replacement for shelf of table bed side with18/19mm thick one side teak faced pre laminated particle board, as as per drawing complete all as specified and as directed by the Engr-in-Charge. |
| 73 | Material and labour in replacement for top of table bed side with18/19mm thick of prelaminated particle board including hard wood beeding as per drawing complete all as specified and as directed by the Engr-in-Charge. |
| 74 | Material and labour in replacement for side of table bed side with18/19mm thick one side teak faced pre laminated particle board as as per drawing complete all as specified and as directed by the Engr-in-Charge. |
| 75 | HAT STAND WITH MIRROR (FD-23 AND FD-261) |
| 76 | Material and labour in replacement for Looking Mirror of size 440mm x300mm x 5.5mm of approved quality duly fixed with beading of size 35mm x 6mm made out of well seasoned teak wood duly finished all as per drawing complete all as specified and as directed by the Engr-in-Charge. |
| 77 | Material and labour in replacement for Aluminium peg 100mm long as per sample shall be fixed with screw wood steel 25mm long all as per drawing complete all as specified and as directed by the Engr-in-Charge. |
| 78 | Material and labour in replacement for MS plate for hanging of Hat stand as per approved sample shall be fixed to the back of the hat stand as shown on the drawing complete all as specified and as directed by the Engr-in-Charge. |
| 79 | Material and labour in replacement for teak wood beading made out of well seaonsed teak wood of size 35mm x 6mm all around shall be provided to the frame of hat stand as shown on drawing complete all as specified and as directed by the Engr-in-Charge. |
| 80 | Material and labour in replacement for Plywood 6mm thick commercial confirming to IS duly approved shall be provided whenever required to be fixed with head less nails at the back side of hat stand all as shown on drawing complete all as specified and as directed by the Engr-in-Charge. |
| 81 | Material and labour in replacement for plywood one side teak face 4mm thick commerical confirming to IS duly approved shall be provided wherever required to be fixed with head less nails at the front side of hat stand as shown on drawing complete all as specified and as directed by the Engr-in-Charge. |
| 82 | CHAIR DINING WITH CUSHION (FD-375, FD/E6/MAP-II/10 |
| 83 | Material and labour in replacement for seat of chair dining with cushion, Seat shall be 12 mm thick BWR grade phenol bonded plywood, commercial veneered both sides, fixed to rails with 12 Nos. steel screws of suitable size. The seat ply shall be covered with removeable 75 mm thick 32 density foam cushion with approved upholstery fabric of best quality as approved by the GE of rate Rs.200/- per meter. All as per drawing complete all as specified and as directed by the Engr-in-Charge. |
| 84 | Material and labour in replacement of undermention old, unserviceable,damage & decayed part of Chair Dinning and Supply and fixing new part made out of well seasoned 1st class teak wood of same shape & size made out of well seasoned 1st class teak wood as per Drawing complete all as specified and as directed by the Engr-in-Charge. (b) Front Leg |
| 85 | Rear leg |
| 86 | Back rest |
| 87 | Front/ Back and side rail |
| 88 | Stiffener |
| 89 | BIN SOLIED LINEN (FD-70M, 244 & 212) |
| 90 | Material and labour in replacement for New top of Bin soiled made out of 18/19mm thick wooden plank of seasoned hard wood to the the existing teak wood frame all as per drawing complete all as specified and as directed by the Engr-in-Charge. |
| 91 | Material and labour in replacement for New sides of bin soiled (front or back) on existing old wooden frame made to shape and size with 18/19mm thick wooden plank all of seasoned hard wood as per drawing complete all as specified and as directed by the Engr-in-Charge. |
| 92 | Material and labour in replacement for New legs to bin soiled (front or back) made to shape and size with 18/19mm thick wooden plank of seasoned hard wood all as per drawing complete all as specified and as directed by the Engr-in-Charge. |
| 93 | Material and labour in replacement for mild steel butt hinges of size 75mm, Medium weight, cold rolled all as per drawing complete all as specified and as directed by the Engr-in-Charge. |
| 94 | STOOL DRESSING CB AND CUSHION (FD-252) |
| 95 | Material and labour in replacement of undermention old, unserviceable,damage & decayed part of Stool dressing CB & Cushion and Supply and fixing new part of same shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge. (a) Legs |
| 96 | Front/back & side rail |
| 97 | Taking out unserviceable foam cushion seat from old stool dressing cushion and supply & fixing new foam cushion seat shall be of 75mm thick cushion of 32 density of size 530mm x560mm duly covered with tapestry cloth , colour, quality and shade as approved by GE/Engr-in-Charge. (Rate not less than 280/- Rs per mtr) matching with existing shape and size all as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 98 | TABLE OFFICE CLERK WOODEN (DB-4118) |
| 99 | Taking out unserviceable Top from Table office Clerk wooden and Supply and fixing new Top made of 18mm plywood thick exterior grade BWR as per IS code 303 Plylam with sunmica (01mm thick) duly covered with 4mm thick teak wood beading all around the top,matching with the existing shape and size, all as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 100 | Material and labour in replacement of undermention old, unserviceable ,damage & decayed part of Table Office Officer Wooden and Supply and fixing new part made out of well seasoned 1st class teak wood of same shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge. (b) Legs |
| 101 | Front/ Back & side rail. |
| 102 | Stiffener |
| 103 | TABLE OFFICE OFFICER WOODEN (DB-4119) |
| 104 | Taking out unserviceable Top from Table office officer wooden and Supply and fixing new Top made of 18mm plywood thick exterior grade BWR as per IS code 303 Plylam with sunmica (01mm thick) duly covered with 4mm thick teak wood beading all around the top,matching with the existing shape and size, all as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 105 | Material and labour in replacement of undermention old, unserviceable, damage & decayed part of Table Office Officer Wooden and Supply and fixing new part made out of well seasoned 1st class teak wood of same shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge. (b) Legs |
| 106 | Front/ Back & side rail. |
| 107 | Stiffener |
| 108 | CHAIR DINING (FD-279, FD-228) |
| 109 | Material and labour in replacement of undermention old, unserviceable, damage & decayed part of Chair Dinning and Supply and fixing new part made out of well seasoned 1st class teak wood of same shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge. (a) Rear Leg |
| 110 | Front leg |
| 111 | Front/back & side rail |
| 112 | Centre & side stiffner |
| 113 | CHAIR WIRITING (FD-280 AND FD-250) |
| 114 | Material and labour in replacement of undermention old, unserviceable, damage & decayed part of Chair Writing and Supply and fixing new part made out of well seasoned 1st class teak wood of same shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge. (a) Rear Leg |
| 115 | Front leg |
| 116 | Front/back & side rail |
| 117 | Centre & side stiffner |
| 118 | CHAIR EASY (FD-229 AND FD-281) |
| 119 | Material and labour in replacement of undermention old, unserviceable,damage & decayed part of Chair Easy and Supply and fixing new part of same shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge. (a) Rear Leg |
| 120 | Front leg |
| 121 | Front/back & side rail |
| 122 | CHAIR WOODEN BOTTOM (FD-225 AND FD-285) |
| 123 | Material and labour in replacement of undermention old, unserviceable,damage & decayed part of Chair Wooden Bottom without Arm and Supply and fixing new part made out of well seasoned 1st class teak wood of same shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge. (a) Rear Leg |
| 124 | Front leg |
| 125 | Seat plywood 6mm |
| 126 | CHAIR EASY CUSHIONED (FD-358) |
| 127 | Taking out unserviceable seat & back frame from chair easy cushioned and Supply and fixing new seat & back frame made out of 3mm thick plywood commercial exterior grade BWR as per IS code No 303. over which to be fixed 75mm thick foam cushion 32 density alongwith upholster leatherised of approved shade and texture by GE . Rate not less than 250/- Rs per mtr. Matching with the existing shape & size All as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 128 | Material and labour in replacement of undermention old, unserviceable, damage & decayed part of Chair Easy Coushion and Supply and fixing new part made out of well seasoned 1st class teak wood of same shape & size as per Drawing complete all as specified and as directed by the Engr-in-Charge. (a) Front leg |
| 129 | Rear leg |
| 130 | Front/back & side rail |
| 131 | TABLE 600 X 600 MM (FD-293) TABLE 900 X 900 MM (FD-291) |
| 132 | Taking out unserviceable top from table 600x600mm, 900x900 mm and Supply and fixing new top made of pre-laminated particle board one side teak face exterior grade BWR 18mm thick duly covered with 4mm thick teak wood beading all around the top. All as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 133 | Taking out unserviceable leg from table 600x600mm, 900x900mm and Supply and fixing new leg made of seasoned teak wood including rubber shoe at the bottom of leg matching with the existing shape & size. All as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 134 | Taking out unserviceable front/ back/ side rail from table 600x600mm, 900x900mm and Supply and fixing new front/ back/ side rail made of seasoned teak wood matching with existing shape & size all as shown in drawing complete all as specified and as directed by the Engr-in-Charge. |
| 135 | TABLE 1520 X 860 X 760MM (FD-139) |
| 136 | Taking out unserviceable top from table 1520x860x760mm and Supply and fixing new top made of pre-laminated particle board one side teak face exterior grade BWR 18mm thick duly covered with 4mm thick teak wood beading all around the top. All as shown in Drawing complete all as specified and as directed by the Engr-in-Charge. |
| 137 | Taking out unserviceable leg from table 1520x860x760mm and Supply and fixing new leg made of seasoned teak wood including rubber shoe at the bottom of leg matching with the existing shape & size all as shown in drawing complete all as specified and as directed by the Engr-in-Charge. |
| 138 | Taking out unserviceable front/ back rail from table 1520x860x760mm and Supply and fixing new front/ back rail made of seasoned teak wood matching with the existing shape & size all as shown in drawing complete all as specified and as directed by the Engr-in-Charge. |
| 139 | Taking out unserviceable side rail from table 1520x860x760mm and Supply and fixing new side rail made of seasoned teak wood matching with the existing shape & size all as shown in drawing complete all as specified and as directed by the Engr-in-Charge. |
| 140 | POLISHING |
| 141 | Scratching existing polish, filling the cracks, making the surface smooth and Material and labour for polishing the undermention wooden furniture with lakhdana & spirit mixture/franch polish complete all as specified and as directed by the Engr-in-Charge Sofa Set 5 seater (FD- 85, 258, 281) |
| 142 | Sofa set 4 seater (FD- 85, 258, 281) |
| 143 | Bed with plywood top (FD- 246, 247) |
| 144 | Table 3'x2' with and without drawer (FD- 223, 284, 224, 283) |
| 145 | Table centre & Table Center 2 tier (FD- 29(M), 235, 274 & FD/MAP/08) |
| 146 | TEAPOY WOODEN (FD-232, 278 & 34(M) |
| 147 | Table peg SMT/MAP (FD-2336, 279, 25 & FD/MAP/11) |
| 148 | Table dinning 6/8 person (FD- 239, 273, 30 & FD/MAP/09) |
| 149 | Table writing (FD-249, 275, 33) |
| 150 | Chair dinning Coushion (FD- 375, FD/E6/MAP-II/10) & Chair Dinning CB (FD-178, 228) |
| 151 | Chair writing (FD- 237) |
| 152 | Chair easy coushion & Chair Easy CB (FD-358) |
| 153 | Book case (FD-237) |
| 154 | Table dressing gents with mirror (FD & MAP) |
| 155 | Table dressing ladies with mirror (FD & MAP) |
| 156 | Hat stand with Mirror (FD-23 & 261) |
| 157 | Bin soiled linen (FD - 70 M, FD-244, FD-212) |
| 158 | Side Board (FD – 241 ) |
| 159 | Table Bed Side ( FD-248 ) & Table Bed side MAP (FD/E6/MAP/15, FB/MAP/07) |
| 160 | Chair wooden bottom with out arms (FD-225 & 285) |
| 161 | Stool dressing CB and cushion (FD- 252 x FD/E6/MAP/14) |
| 162 | Sofa Set Single Seater (FD-281) |
| 163 | Table Office clk wooden (DB-4118 ) |
| 164 | Table Office Officer wooden:-(DB-4119) |
| 165 | Table 600x600mm/ 900x900mm (FD-293, 291) |
| 166 | Table 1520x860x760mm (FD- 139)NOTE FOR ITEM NO 27.00- (i) Work to be executed at Unit/OTM location or in furniture yard. (ii) Proper staging and layout repaired furniture inside the store if required in furniture yard as directed by Engineer-in-Charge. |
| 167 | NOTE:- Amount of credit of Rs. 37,104.00 for retrieved materials is mentioned in Schedule of Credit Page No 19 & 20 of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender