Tender For Upgradation Work Of Health Sub Centre Mallahan Singh Chilhariya
Tender Value
10.39 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
6 days left
EMD
10400
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bahraich → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Work Of Health Sub Centre Mallahan Singh Chilhariya
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Oct-2026 | DATE EXTEND | Date | 02-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismentling cement concrete of brick or granolithic floors including stacking of dismmantied material as directed by the engineer-in-charges with in a distance of 60 mtr. (200ft.) |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, hold fasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below. |
| 3 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer in-Charge. |
| 4 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 5 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm. |
| 6 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm. |
| 7 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc.complete : 125mm. |
| 8 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes. |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 10 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm. |
| 11 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc complete. Size of Tile 600x600 mm. |
| 12 | Supply & Fixing Stainless steel Mosquito Mesh Window Etc All Complete. |
| 13 | Repairing Of Window. |
| 14 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources). |
| 15 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 16 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including waterthinnable priming coat with cement primer. |
| 17 | Varnishing with varnish of approved brand and manufacture : Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish. |
| 18 | 1HP Single Phase Heavy Duty Self Priming Monoblock Water With Boring etc All Fitting Complete. |
| 19 | Other Hidden & Miscelenious Work. |
| 20 | Electrification Work. |
| 21 | Providing and fixing white Vitreous water closet squating pan (Indian type W.C.pan) of size 580x440 mm with intergral type foot resrts with 100 mm sand cast Iron P or S trap,10 litre low level white P.V.C.flushing cistern,including flush pipe,with manually controlled device (handle lever) conformin to IS:7231,with all fittings and floors complete,including cutting and making good the walls and floors wherever required. |
| 22 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.4.1 One urinal basin with 5 litre white P.V.C.automatic flushing cistern. |
| 23 | Providing and fixing wash basin with C.I.brackets,15mm C.P.brass pillar taps.32mm C.P.brass waste of standard pattern,including painting of fitting and brackets,cutting and making good the walls wherever require.White Viterous China flat back wash basin size 550x400mm with single 15mm C.P.brass pillar tap. |
| 24 | Providing and fixing P.V.C.waste pipe 32 mm for sink or wash basin including P.V.C.waste fittings complete. |
| 25 | Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete. |
| 26 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 27 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms |
| 28 | Providing and fixing soil, waste and vent pipes Centrifugally cast (spun) iron socket &spigot (S&S) pipe |
| 29 | 100mm dia cast (spun) iron socket & (S&S) pipe |
| 30 | 75mm dia (spun) iron socketed pipe |
| 31 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter |
| 32 | 100 mm |
| 33 | 75 mm |
| 34 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. |
| 35 | 100 mm dia pipe |
| 36 | 75 mm dia pipe |
| 37 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors |
| 38 | 100 mm inlet and 75 mm outlet, Sand cast iron S&S as per IS:3989 |
| 39 | Providing and fixing collar : |
| 40 | 100 mm dia |
| 41 | 75mm dia |
| 42 | Providing and fixing plain bend of required degree |
| 43 | 100mm dia |
| 44 | 75mm dia |
| 45 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 46 | 100mm dia |
| 47 | 75mm dia |
| 48 | Providing and fixing single equal plain junction of required degree |
| 49 | 100x100x100mm |
| 50 | 75x75x75mm |
| 51 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 52 | 110mm dia |
| 53 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc.complete. |
| 54 | 110mm dia |
| 55 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 56 | 110mm dia |
| 57 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 58 | Coupler : 110mm |
| 59 | Bend : 110 mm |
| 60 | Single tee without door : 110x110x110mm |
| 61 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.25 mm nominal dia Pipes |
| 62 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 63 | 15 mm nominal dia Pipes |
| 64 | 20 mm nominal dia Pipes |
| 65 | 25 mm nominal dia Pipes |
| 66 | Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length |
| 67 | 15 mm nominal bore |
| 68 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 69 | 15 mm nominal bore |
| 70 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 71 | 15mm nominal bore |
| 72 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 73 | 25 mm nominal bore |
| 74 | Providing & Placing On Terrace (at all floor levels) polyethylene water storage tank, IS : 120701 marked, cover and suitable locking aggrement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base supports for tank capacity 1000 litters. |
| 75 | Providing and fixing brass stop cock of approved quality : 20 mm nominal bore |
| 76 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 77 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc.complete : |
| 78 | 100mm dia |
| 79 | 150mm dia |
| 80 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : |
| 81 | 100mm dia |
| 82 | 150mm dia |
| 83 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: |
| 84 | 150 x 100 mm size P type : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 85 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : |
| 86 | Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : |
| 87 | With common burnt clay F.P.S. (non modular)bricks of class designation 7.5 |
| 88 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 89 | 15mm nominal bore |
| 90 | Providing And Fixing PTMT Grating (circular) Of aproved quality and colour |
| 91 | 100mm Circular type |
| 92 | Earth Work In Surface Excavation Not Exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and didposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge: |
| 93 | P/L in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1:1½:3 ( 1 cement : 1½ coarse sand (zone - III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 94 | Providing and laying in position cement concrete of specifed grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 ( 1 cement : 2 coarse sand (zone - III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 95 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in : Cement Mortar 1:6 (1 Cement : 6 Coarse Sand). |
| 96 | 12mm Cement Plaster Finished With a floting coat of neat cement of mix :1:3 (1 cement : 3 fine sand). |
| 97 | Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 98 | Steel Reainforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing in Position And Binding All Complete Upto Plinth Level.Themo-Mechanically Treated Bars Of Grade Fe- 500D or more. |
| 99 | Providing M.S. Foot Rests Including Fixing in Main Hole With 20X20X10 cm cement concrete blocks 1:3:6 With 20X20 mm Square Bar |
| 100 | Providing And Fixing Of Soil, West And Vent Pipes:75 mm diameter Centrifugally cast (spun) iron socketed pipe as per IS: 3989 |
| 101 | Providing And Fixing Terminal Guard: 75mm Sand Cost iron S&S as per IS - 1729 |
| 102 | Providing And Fixing in position pre-cast R.C.C. Manhole cover And frame of required shape and approved quailty H D - 20 CircularShape 560 mm internal diameter. |
| 103 | S/F Of Granite Stone Sign Board Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 02, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender