Tender For General-Rehabilitation Of Li Scheme- Replacing Of Old Pump And Motor Of Kanjirathumkadavu Li Station In Sooranadu North Panchayath - Contract Termination - Balance Work Estimate-Balance Work-General Mechanical Work
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Oct 2026
7 days left
EMD
9364
Bank guarantee accepted
Document Fee
830
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathanamthitta → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Rehabilitation Of Li Scheme- Replacing Of Old Pump And Motor Of Kanjirathumkadavu Li Station In Sooranadu North Panchayath - Contract Termination - Balance Work Estimate-Balance Work-General Mechanical Work
BOQ
| Sl. No. | Item Description |
| 1 | Balance Work- Supply and laying of suction pipe dia 250 mm and delivery pipe of dia 200 mm |
| 2 | OD17644/2024-2025::Supply of Rubber Insertion sheet to prevent the leakage through the joints inbetween two flanges and cutting to size, drilling and fitting in correct position etc including cost of material,labour charge etc are completed by the departmental officers at site. |
| 3 | OD17718/2024-2025:Supply of M16 bolt & nut for fixing the flange connections including cost ofmaterials, labour charges and conveyance etc completed by the departmental officers at site. |
| 4 | 85.102:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges |
| 5 | OD17719/2024-2025:Painting Synthetic enamel paint two coats on new iron work and iron fittings usingapproved quality paint over the priming coat already done, including cost of materials, hire and labour,conveyance etc. complete as per the directions of the departmental officers at sitePainting Area250mm pipe 6m=4.98 m2250mm bend 2 nos= 4.65 m2300mm pipe 15m= 14.7 m2300mm bend 3nos= .942 m2U clamps 4 nos= 0.3 m2Total= 25.57 say 26 m2 |
| 6 | OD17720/2024-2025:Supply of GI pipes and fittings for 3HP vacuum pump conections as per sitecondition including cost of all materials,labour ,conveyance etc complete as per the direction ofdepartmental officers at site |
| 7 | 18.72.18:Providing and laying S & S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329:250 mm dia Ductile Iron Class K - 9 pipes |
| 8 | 18.72.17:Providing and laying S & S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329:200m dia Ductile Iron Class K - 9 pipes |
| 9 | OD17721/2024-2025::Providing and fixing eccentric reducer of standard specifications for suction anddelivery line, cost includes cost of materials,gasket,nut and bolt,labour charges for fitting and conveyanceetc, complete but excluding cost of flange |
| 10 | OD17722/2024-2025::Providing 250NB DI suitable angle including cost of materials gasket,nut andbolt,labour for fitting charge,conveyance etc,complete but excluding cost of flange. |
| 11 | OD17723/2024-2025:Providing 200NB DI suitable angle including cost of material, gasket, nut andbolt ,labour for fitting charge, conveyance etc, complete but excluding cost of flange |
| 12 | OD17724/2024-2025::Providing MS flange for 250NB pipe line including cost of all material,labour,conveyance etc complete as per the direction of departmental officers at siteFor 1No Flange(cut from MS plate of 440mm X440mmX16mm=24.31 Kg plate) |
| 13 | OD17725/2024-2025:Providing MS Flange for 200NB pipe line including cost of all material,labour,conveyance etc complete as per the direction of departmental officers at siteFor 1 No flange(cut from MS plate of 352mmX352mmX16mm=15.56Kg plate) data for fabrication and fitting for 1 set. |
| 14 | OD17875/2024-2025:Providing 250 NB DI Bend of suitable angle including cost of material, gasket nutand bolt labour for fitting charges, conveyance etc complete but excluding cost of flange |
| 15 | OD17876/2024-2025:Providing 200 NB DI Bend of suitable angleincluding cost of material,gasket,nutandbolt,labour for fitting charges,conveyance etc complete but excluding cost of flange. |
| 16 | OD17878/2024-2025:Joining 250mm DI Tyton pipe already laid using rubber gasket after cleaning end ofpipes,inserting the rubber gasket inside the groove and making the joint water tight with out causing anydamages to the rubber gasket including the cost of all labour hire charge for winch and other appliancecomplete,but excluding cost of rubber gasket.Code Description Unit Quantity Rate Amoun |
| 17 | OD17879/2024-2025::Cutting 200 mm DI pipe diametrically,the cut beaing perpendicular to the axis ofpipe and smoothing the cut end etc complete as per the direction of departmental officers at site |
| 18 | OD17880/2024-2025:Joining 200 mm DI Tyton pipe already laid using rubber gasket after cleaning end of pipes,insertingrubber gasket inside the groove and making the joint water tight without causing any damage to therubber gasket including the cost of all labours, hire charge for winch and other appliances complete, butexcluding cost of rubber gasket |
| 19 | OD17889/2024-2025:Testing DI pipe line with water to the required test pressure as per the direction ofdepartmental officers at site |
| 20 | OD17894/2024-2025:Providing and fitting U clamp for pipes cost includes cost of all materials,labourcharges and conveyance complete.1.5 m long 40X10 MS flat (weight includes 5 % wastage)Foundation bolt and nut M12X300-2 Nos. |
| 21 | OD17901/2024-2025:Supply and fitting strainer and accessories as per the direction of departmentalofficers at site |
| 22 | OD17903/2024-2025:Supply and fixing cast Iron gate valve of approved quality 200 mm nominal dia asper the direction of departmental officers at site |
| 23 | OD17904/2024-2025:Supply and fitting Cast Iron non return valve of approved quality of 250 mm nominal dia as per thedirection of departmental officers at site |
| 24 | OD17927/2024-2025:Providing and fixing MS support for the pipe by using ISA 100x100x10mm as per thedirection of departmental officers at site. But excluding the cost of materials already supplied |
| 25 | OD23933/2024-2025: Cutting 250mm DI pipe diametrically, the cut being perpendicular to the axis of pipe and smoothing of the cut end etc complete as per the direction of departmental officers at site Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender