Tender For Construction Of 33Kv Line From Baruwari Point To Traffic Colony, Station Road, Panbazar, Guwahati-01Along With Associated Works In Favour Of The Sr. Divisional Electrical Engineer/G&Chg/Lmg, Nf Railway Under Deposit Work Scheme Under Palta
Tender Value
1.30 Crore
Estimated cost
Bid Submission
23 Oct 2026
5 days left
EMD
2.61 Lakhs
Bank guarantee accepted
Document Fee
2607
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 33Kv Line From Baruwari Point To Traffic Colony, Station Road, Panbazar, Guwahati-01Along With Associated Works In Favour Of The Sr. Divisional Electrical Engineer/G&Chg/Lmg, Nf Railway Under Deposit Work Scheme Under Paltanbazar Electrical Sub-Division On Full Turnkey Mode .
BOQ
| Sl. No. | Item Description |
| 1 | Construction of 33KV line from Baruwari point to Traffic colony, Station Road, Panbazar, Guwahati-01along with associated works in favour of The Sr. Divisional Electrical Engineer/G&CHG/LMG, NF Railway under deposit work scheme under Paltanbazar Electrical Sub-Division on Full Turnkey Mode .(refer Annexure-1)Itemwise price should be filled in strictly as per the detailed Bill of Quantities at respective referred Annexure. |
| 2 | GI Steel Tubular Pole SP-66 (12.00 Mtr) |
| 3 | GI Steel Tubular Pole SP-80 (16Mtr) |
| 4 | Tubler Pole Clamp(Galvenized)50X6mm |
| 5 | GI channel Cross Arm(100X50X6X3200mm) |
| 6 | GI channel Cross Arm(100X50X6X2200mm) |
| 7 | 33 KV 1C X 241 Sq MM AAAC triple extruded Covered Conductor |
| 8 | 11KV Pin Insulator (Polymer) 5KN (FRP 24mm) |
| 9 | 11KV Disc Insulator (Polymer) 45 KN (T&C Type) |
| 10 | 11KV H/W fitting for Disc Insulator T&C 45kN tension type |
| 11 | 33KV Polymeric Pin insulator |
| 12 | 33KV Post Insulator (Porcelain) |
| 13 | Tension insulator 33 KV 1C X 241 Sq MM AAAC Covered Conductor |
| 14 | Tension Hardware 33 KV 1C X 241 Sq MM AAAC Covered Conductor |
| 15 | GI earthing Pipe 50mm dia 3m length 3.15 mm thickness with perforated holes of 15mm dia at 30 cm interval along length of the pipe |
| 16 | GI Angle (50x50x6)mm |
| 17 | 33KV 10KA Lighting Arrestor without Surge Counter & GI Mounting Structure (Station Type) |
| 18 | ASA Disbribution box with pre-fitted lug for 250A 3 Ph 10 connectors with spring loaded Busbar system for service connection. |
| 19 | Anchor Clamp Wedge Type LT ABC as per NFC Standard |
| 20 | Suspension clamp ABC as per NFC standard |
| 21 | Eye Hook for Anchor and Suspension Clamp |
| 22 | Insulating piercing connector IPC P2x95 for DB charging as per NFC |
| 23 | Shackle Insulator Porcelain |
| 24 | Hot Dip GI Wire 6 SWG |
| 25 | GI Nuts & bolt with GI washer(assorted) |
| 26 | PG Clamp for ACSR Wolf |
| 27 | PG Clamp for ACSR Raccon |
| 28 | 11KV GOAB 400Amp switch |
| 29 | 33KV 3Ph 4w combined CTPT set 400/5Amp |
| 30 | 33KV 3Ph 4w combined CTPT set 25/5Amp |
| 31 | 33KV Grade XLPE armoured cable 1C X400sqmm |
| 32 | 33KV XLPE Cable jointing kit1C x 400 sq.mm. |
| 33 | Control cable 1.1KV copper 2C x 2.5 sqmm |
| 34 | Control cable 1.1KV copper 4C x 2.5 sqmm |
| 35 | Control cable 1.1KV copper 10C x 2.5 sqmm |
| 36 | Aluminium pipe bus -2.5\\" Dia -5.16 mm Thickness |
| 37 | 33KV C&R Panel for Feeder (with IEC 61850 compliant numerical relay & static TVM) |
| 38 | GI strip 50x6mm for earthing |
| 39 | GI Strip 25x3mm for earthing |
| 40 | 33KV DO Fuse 150A Assembly |
| 41 | 33KV VCB 800A with GI Mounting Structure |
| 42 | TPGO-DBCR without Earth switch but with GI mounting Structure 630 Amps |
| 43 | 0.5 Class 1ph Outdoor CT with GI mounting structure & marshaling Box (Set comprising of three units) 200-100/5-5A, 25kA for 3 sec |
| 44 | HDPE pipe PE100 grade 315mm outer dia |
| 45 | 33KV Danger Plate |
| 46 | Aluminium Lugs-240Sq mm |
| 47 | Metering Cabinet |
| 48 | Grouting & mufflering of steel tubular pole of type SP-66 and SP-76 as per specification and drawing with minimum planting depth of 2.15 m (using PCC) |
| 49 | Grouting & mufflering of steel tubular pole of type SP-80 as per specification and drawing with minimum planting depth of 2.45 m (using PCC) |
| 50 | Dismantling of RS Joist pole (10mtr) 175x85mm |
| 51 | Dismantling of PSC Pole 8.5m |
| 52 | Dismantling of GI channel Cross Arm(100X50X6X2200mm) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender