Tender For Repair & Maintenance Of Rural Roads/Cds/Bridges Of Kujjer Tengbal To Gandbal, Package No: Jk01-75, Length:2.50 Km Under Pmgsy Division Kulgam For Incentive Fund Scheme F.Y.2026-27
Tender Value
97.16 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
0 days left
EMD
1.94 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kulgam → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Maintenance Of Rural Roads/Cds/Bridges Of Kujjer Tengbal To Gandbal, Package No: Jk01-75, Length:2.50 Km Under Pmgsy Division Kulgam For Incentive Fund Scheme F.Y.2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Part A |
| 2 | Repair & Maintenance of Rural Road and CDs/Bridges under Package No. JK01-75 as per detailed BOQ attached in Annex-A JKRRDA , PIU KULGAM Bill of Quantity Name of Road: Kujjer Tengbal to Gandbal District: Kulgam Package No. : JK0175 Block: Kulgam Length: 2.5 km S.No. Description UNIT QTY RATE (₹)Excluding GST AMOUNT (₹) PART-I (Initial Rehabilitation) |
| 3 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom ordinary soil. upto 3 m depth |
| 4 | Type B (First Class) Bedding: Laying (First Class) bedding of well compacted sand, moorum or approved granular material as per Clause 1105 |
| 5 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (P.C.C Grade M-10 Nominal mix 1:3:6) |
| 6 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (P.C.C Grade M-15 Nominal mix 1:2.5:5). |
| 7 | Backfilling behind walls as per the drawing and technical specification clause 1103 granular material using nallah muck |
| 8 | site clearance |
| 9 | Stripping of excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor t/s clause 1903 |
| 10 | Scarifying Existing Bituminous surface to a depth of 150 mm by mechanical means including disposal of scarified material with lift upto 3 m and lead upto 1000m as per techanical specification clause 301.4 ( 5% of total Surface area.) |
| 11 | Road Furniture |
| 12 | Citizen infarmative board :- Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 1.5 mm thick supported on RCC Post 100 mm x 100 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing Clause 1701 |
| 13 | Kilometer Stone:-Reinforced cement concrete M-15 grade KM stone /local stone of standard design as per IRC -8, fixing in position including painting and printing etc. as per drawing and technical specification clause 1703. |
| 14 | Retro relectorised Trafic signs : Providing and fixing of retro reflected cautionay, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixied over aluminium sheeting 1.50mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450mm x 450mm x 600 mm, 600mm below gournd level as per drawings and technical specification clause 801 (Curve, School, Left turn, Right turn, speed limit, busbays, merge traffic, diverge trafficc, give way , stop etc) |
| 15 | Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702 |
| 16 | TOTAL |
| 17 | PART-III (Renewal Coat) |
| 18 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. |
| 19 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desireddensity including lighting, barricading and maintenance of diversion, etc as perTables 400.11 & 400.12 and Technical Specification Clause 406. |
| 20 | Providing and laying 50mm thick bituminius macadam with hot mix plant using crushed aggregate of grading as per table 500.4 premixed with bituminious binder, transported to site of work upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per technical specificaion clause 504 including cost and carriage of all materials from approved source to site of work withe all leads lifts, loading, unloading and Octori (finished work to be measured) complete job |
| 21 | Tack Coat: Providng and applying tack coat with Bitumen Emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 Kg/ per sqm on the prepared bituminious surface cleaned with hydraulic broom as per technical specification clause 503 including cost and carriage of all materials from approved source to site of work withe all leads lifts, loading, unloading and Octori (finished work to be measured) complete job |
| 22 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as perTechnical Specification Clause 502 |
| 23 | OGPC: Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. |
| 24 | Providing and laying seal coat sealing the voids in a bituminious surface laid to the specified levels, grade and cross fall using Type B by mechanical means as per techanical specification caluse 510 including cost and carriage of all materials from approved source to site of work withe all leads lifts, loading, unloading and Octori (finished work to be measured) complete job |
| 25 | Construction of Hard Shoulders with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. TOTAL 6154796.1 Part-I (Initial Rehabilitation) 1258880.4 Part-II (Routine maintenance) 819492.0 Part-III (Renewal Coat) 6154796.1 Total PAC for package (Excluding GST) 8233168.5 After Renewal Maintenance (Cost in Rs. Per Year Per Km) Road Name 1st Year 2nd Year 3rd Year 4th Year 5th Year Kujjer Tengbal to Gandbal, Package No: Jk01-75 42717.0 64075.0 85434.0 106791.93 128150.0 Before Renewal Maintenance (Cost in Rs. Per Year Per Km) Kujjer Tengbal to Gandbal, Package No: Jk01-75 1st Year 2nd Year 3rd Year 4th Year 5th Year 106182.0 112081.0 117980.0 123879.0 129778.0 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender