Tender For Annual Maintenance Of electrical installation Works In The Nonresidential Government Office Buildings Under The Jurisdiction Of Ie Subdivision No I Gurkhabasti Agartala For The Fy2026 27
Tender Value
8.02 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
0 days left
EMD
16058
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Maintenance Of electrical installation Works In The Nonresidential Government Office Buildings Under The Jurisdiction Of Ie Subdivision No I Gurkhabasti Agartala For The Fy2026 27
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with wooden switch board with bakelite cover and piano type switch including connection etc as required:- |
| 2 | Short Point :- |
| 3 | Medium Point :- |
| 4 | Long Point :- |
| 5 | Providing and fixing of 3 pin 5/6 amps plug point with piano type 5/6 amps switch and socket including connection with 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) on switch board, earthing the 3rd pin etc. as required:- |
| 6 | Providing and fixing of 3/6 pin15/16 amps plug point with piano type 15/16 amps switch and socket including connection with 2x2.5 sq. mm PVC insulated Copper conductor cable (FR) on switch board, earthing the 3rd pin etc. as required:- |
| 7 | Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with 6/10 amps modular type switch, cover plate, surface modular switch board including connection etc as required:- |
| 8 | Short Point :- |
| 9 | Medium Point :- |
| 10 | Long Point :- |
| 11 | Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) on surface modular switch board, earthing the 3rd pin etc. as required:- |
| 12 | Providing and fixing of 3/6 pin 16/20 amps plug point with modular type 16/20 amps switch and socket including connection with 2x2.5 sq. mm PVC insulated Copper conductor cable(FR) on surface modular switch board, earthing the 3rd pin etc. as required:- |
| 13 | Wiring for Circuit/Sub-main wiring with the following sizes PVC insulatedcopper conductor cable (FR) in PVC casing capping etc. as required:- |
| 14 | 2 x 1.5sq.mm:- |
| 15 | 2 x 2.5 sq.mm:- |
| 16 | 2 x 4 sq.mm:- |
| 17 | 4 x 4 sq.mm:- |
| 18 | 4 x 6 sq.mm:- |
| 19 | 4 x 10 sq.mm:- |
| 20 | 4 x 16 sq.mm:- |
| 21 | 4 x 25 sq.mm:- |
| 22 | Wiring for Circuit/Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping/ conduit in recess/surface including connection etc. as required:- |
| 23 | 1 X 1.5 sq mm |
| 24 | 1 X 2.5 sq mm |
| 25 | 1 X 4 sq mm |
| 26 | 4 x 50 sq.mm:- |
| 27 | 4 x 120 sq.mm:- |
| 28 | Supplying and fixing of the following PVC casing capping with all accessories etc. as required. |
| 29 | 25mm x 12mm |
| 30 | Supplying and fixing of the following sizes PVC conduit (medium gauge) on surface with all accessories etc. as required. |
| 31 | 19/20 mm dia |
| 32 | Supplying and fixing of the following electrical accessories including necessary connection etc. as required. |
| 33 | 5/6 amps piano type switch |
| 34 | 16/20 amps piano type switch |
| 35 | 5/6 amps piano type call bell push |
| 36 | 3 pin 5/6 amps piano type socket |
| 37 | 3/6 pin 16/20 amps piano type socket |
| 38 | Electronic 5 step fan regulator |
| 39 | Angle/batten holder |
| 40 | Ceiling rose |
| 41 | Ding dong call bell |
| 42 | Musical call bell |
| 43 | 2.5 mfd fan capacitor |
| 44 | 5 amps power top:- |
| 45 | 15 amps power top:- |
| 46 | 32 amps DP kit kat switch:- |
| 47 | Supplying and fixing of the following sizes wooden switch boards with 3mm thick bakelite cover etc. as required. |
| 48 | 102mm x 178mm (4\\" X 7\\") :- |
| 49 | 152mm x 203mm (6\\" X 8\\") :- |
| 50 | 203mm x 254mm (8\\" X 10\\") :- |
| 51 | 203mm x 300mm (8\\" X 12\\") : |
| 52 | Supplying and fixing of the following sizes PVC switch boards with cover etc. as required. |
| 53 | 75mm x 75mm (3\\" X 3\\") :- |
| 54 | Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required. |
| 55 | 1-2 module plastic switch board:- |
| 56 | 3 module plastic switch board:- |
| 57 | 6 module plastic switch board:- |
| 58 | 8 module plastic switch board:- |
| 59 | 12 module plastic switch board:- |
| 60 | Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required. |
| 61 | 1-2 module :- |
| 62 | 3 module :- |
| 63 | 6 module :- |
| 64 | 8 module :- |
| 65 | 12 module :- |
| 66 | Supplying and fixing of the following modular accessories including necessary connection etc. as required. |
| 67 | 6/10 amps one way SP switch (1M) :- |
| 68 | 16/20 amps one way SP switch (1M) :- |
| 69 | Bell push SP (1M) :- |
| 70 | 3 pin 6/10 amps socket outlet (2M):- |
| 71 | 3/6 pin 16/20 amps socket outlet (2M):- |
| 72 | 5 step fan regulator (2M):- |
| 73 | Blank plate (1M):- |
| 74 | 20/25 amps single phase motor starter switch (2M):- |
| 75 | Earthing with 40 mm dia G.I. Earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top CI cover plate size 12\\"x 12\\" having locking arrangement including CC work, holes on earth pipe etc. as required. |
| 76 | Extra for using salt (5 kg) and charcoal (46kg) for pipe earth electrode as required. |
| 77 | Proving and fixing / drawing of 4.06 mm dia (8 SWG) G.I. wire on surface or in existing G.I/ PVC/ Polythene pipe for loop earthing as required. |
| 78 | Providng and laying 15mm dia(medium gauge) G.I. pipe for drawing of 4.06mm (8SWG) dia G.I./ Copper wire for earth connection from earth electrodes etc as required. |
| 79 | Supplying of 1200 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades (Without regulator) (ISI marked, BEE 1 star/minimum service value 4.0m3/min/W) : - |
| 80 | Installation, testing and commissioning of ceiling fan including wiring the down rod of standard length (up to 30 cm) by 2 x 1.5 Sq.mm PVC insulated copper conductor cable(FR) etc as required. |
| 81 | Supplying & installation of 400 mm sweep AC padestal fan with plastic blade including connection etc as required:- |
| 82 | Supplying & installation of 400 mm sweep AC padestal fan with metal blade including connection etc as required:- |
| 83 | Supplying & installation of 400 mm sweep AC wall mounting fan with plastic blade including connection etc as required:- |
| 84 | Supplying & installation of 225/230 mm sweep metalic body exhaust fan including connection etc as required:- |
| 85 | Supplying & installation of 300 mm sweep metalic body exhaust fan including connection etc as required:- |
| 86 | Supplying & installation of shutter for 225/230/300 mm sweep metalic body exhaust fan in the existing hole as required:- |
| 87 | Dismantling the existing ceiling fan and making winding by (34/35/36 S.W.G) Copper wire, varnish, oiling, greasing and re-fixing the same including wiring the down rod of standard length ( up to 30 cm ) etc. as required :- |
| 88 | Making different sizes of hole in the wall for fixing of exhaust fan including finishing the same with cement plastering and painting etc as required: |
| 89 | Supplying and fixing of following room heater complete with 15 amps top including necessary connection etc as required. |
| 90 | 1000/1500/2000/2500 watt blower type room heater:- |
| 91 | Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):- |
| 92 | Recessed round/Square shaped 6 watt LED downlight with integral driver and high quality polycarbonate diffuser:- |
| 93 | Recessed round/Square shaped 12 watt LED downlight with integral driver and high quality polycarbonate diffuser:- |
| 94 | Recessed round/Square shaped 18 watt LED downlight with integral driver and high quality polycarbonate diffuser:- |
| 95 | Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:- |
| 96 | 12 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :- |
| 97 | 18/20 watt LED tube with integral driver and polycarbonate diffuser (50000 burning hours and minimum lumen output of 100lm/watt):- |
| 98 | Supplying and installation of Bus bar chamber of the following ratings and sizes made of steel sheet enclosure with all accessories including necessary connection etc. as required:- |
| 99 | 63 amps 415 volts four strip Copper busbar chamber 6 ways of size (455mmx330mmx120mm):- |
| 100 | 100 amps 415 volts four strip Copper busbar chamber 6 ways of size (610mmx410mmx120mm):- |
| 101 | Supplying and installation of Switch disconnector fuse unit (main switch) of the following ratings with all accessories including necessary connection etc. as required:- |
| 102 | 32 amps 415 volts TPN main switch (rewireable):- |
| 103 | 63 amps 415 volts TPN main switch (rewireable):- |
| 104 | 100 amps 415 volts TPN main switch (rewireable):- |
| 105 | Supplying and installation of fuse unit kitkat/HRC/HBC of the following ratings in existing main switch/panel board including necessary connection etc as required:- |
| 106 | 32 amps kitkat porcelain fuse unit with base(rewireable):- |
| 107 | 63 amps kitkat porcelain fuse unit with base(rewireable):- |
| 108 | 100 amps kitkat porcelain fuse unit with base(rewireable):- |
| 109 | Supplying and installation of change over switch of following ratings with enclosure including necessary connection etc. as required:- |
| 110 | 32 amps FP on load change over switch (Side handle with enclosure):- |
| 111 | 63 amps FP on load change over switch (Front handle with enclosu |
| 112 | 100 amps FP on load change over switch (Front handle with enclosure):- |
| 113 | Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required. |
| 114 | 2 way SPN MCB DB (single door):- |
| 115 | 4 way SPN MCB DB (double door):- |
| 116 | (2+6) / 8 way SPN MCB DB (double door):- |
| 117 | (2+10) / 12 way SPN MCB DB (double door):- |
| 118 | 4 way horizontal TPN MCB DB (Double door):- |
| 119 | 6 way horizontal TPN MCB DB (Double door):- |
| 120 | Supplying and installation of powder coated steel sheet enclosure for 415 volts MCCB (TP/FP) complete with necessary connection etc as required:- |
| 121 | Enclosure suitable for MCCB above 100 amps upto 250 amps:- |
| 122 | Supplying & fixing of following ratings MCB B/C curve having breaking capacity 10 KA in the existing MCB DB including connection as required:- |
| 123 | 6 to 32 amps SP MCB:- |
| 124 | 6 to 32 amps DP MCB:- |
| 125 | 40/50/63 amps TP MCB:- |
| 126 | Supplying & installation of isolators of following ratings in the existing MCB DB including connection etc as required:- |
| 127 | 40 amps DP isolator:- |
| 128 | 40 amps FP isolator:- |
| 129 | 63 amps FP isolator:- |
| 130 | Supplying & installation of TP/FP MCCB of following ratings in the existing MCCB enclosure/ panel board including connection etc as required (Ics=100% of Icu with adjustable settings):- |
| 131 | 16 to 100 amps TP MCCB, Breaking capacity 16/18KA (Thermal Magnetic):- |
| 132 | 125 amps TP MCCB, Breaking capacity 25KA (Thermal Magnetic):- |
| 133 | 160 amps TP MCCB, Breaking capacity 25KA (Thermal Magnetic) :- |
| 134 | 200 amps TP MCCB, Breaking capacity 25KA (Thermal Magnetic) :- |
| 135 | Supplying and laying of the following sizes XLPE insulated PVC sheathed aluminium conductor armoured cable with necessary connection etc as required |
| 136 | 3 core 4 Sq mm |
| 137 | 3 core 10 Sq mm |
| 138 | 3.5 core 25 Sq mm |
| 139 | 3 .5 core 35 Sq mm |
| 140 | Supplying and fixing of Copper terminal ends (LUGS) - long barrel of following sizes: - |
| 141 | 4 sq mm |
| 142 | 10 sq mm |
| 143 | 16 sq mm |
| 144 | 50 sq mm |
| 145 | Supplying and fixing of aluminium terminal ends (LUGS) - long barrel of following sizes : - |
| 146 | 4 sq mm |
| 147 | 10 sq mm |
| 148 | 25 sq mm |
| 149 | 35 sq mm |
| 150 | Supplying and fixing of thermoplastic cable junction box with connectors suitable for following sizes cable : - |
| 151 | 1.5 sqmm - 4 sqmm Cable:- |
| 152 | Supplying & fixing of G.I. pipe (medium gauge) bracket fabricated at suitable angle for fixing of outdoor light on wall/ RCC base with necessary MS clamp, nut, bolt etc as required:- |
| 153 | 25 mm dia |
| 154 | 40 mm dia |
| 155 | Supplying and fixing of MS frame made of (25mm x 25mm x 5mm) MS angle with necessary support by (40mm x 6mm) MS flat and 12 mm thick marine plywood on top, grouted on wall with 4 nos legs (25mmx25mmx5mm MS angle 20 cm long) finished with red oxide and 2 coat synthetic enamel paint including necessary cc work, mending the damages & painting etc as required:- |
| 156 | Supplying & fixing of 40 mm dia G.I pipe (medium gauge) cross bar for fixing of ceiling fan/luminaries including painting & necessary accessories etc as required. |
| 157 | Drawing of armoured/un-armoured cable with proper saddeling etc as required:- |
| 158 | Supplying, installation, testing and commissioning of following ratings inverter with Square/ sine wave technology, noiseless operation, inbuilt advance PCB programming, microprocessorwith all accessories including necessary connections etc. as required:- |
| 159 | 1100 VA, 12V DC, 1 Ph input/1 Ph output inverter(Square wave technology):- |
| 160 | Supplying, installation, testing and commissioning of following ratings Valve regulated lead acid(VRLA) battery with all accessories including necessary connections etc. as required:- |
| 161 | 12 V/ 180AH tall tubular/ flat plate Battery:- |
| 162 | Supplying and fixing of following outdoor LED luminaries in powder coated Aluminium die cast housing complete with precise street Optic Lens with heat resistant tempered glass/diffuser protection with IP66 and IK 08/10 impact resistance including necessary connection etc. as required (with 50000 burning hours, THD ≤10% and minimum lumen output of 120lm/watt with LM79 report from NABL accrediated lab):- |
| 163 | 60 watt LED street light fixture with integral driver and secondary lens:- |
| 164 | 80 watt LED street light fixture with integral driver and secondary lens, (10kV External & 6kV internal SPD):- :- |
| 165 | 120 watt LED street light fixture with integral driver and secondary lens, (10kV External & 6kV internal SPD):- (IP 66):- |
| 166 | Supplying and fixing of following surface/recess mounted round/square shaped die cast Aluminium housing with white powder coated polycarbonate diffuser having minimum IP20 protection complete with electronic LED driver mounting clamp including necessary connection etc. as required (with 50000 burning hours,THD ≤10% and minimum lumen output of 100lm/watt with LM79 report from NABL accrediated lab):- |
| 167 | Surface mounted round/Square shaped 12 watt LED downlight with,Internal SPD-2.5 KV. |
| 168 | Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with precise street Optic Lens with heat resistant tempered glass/diffuser protection with IP66 and IK08 impact resistance including necessary connection etc. as required (with 50000 burning hours, THD less then or equel 10% and minimum lumen output of 120 lm/watt with LM79 report from NABL accrediated lab):- |
| 169 | 200 watt LED flood light fixture with integral driver and secondary lens, 10 KV extranal & 6 KV internal SPD:- |
| 170 | Supply and fixing of surface mounted batten with powder coated finished 0.5 mm thick CRCA steel sheet housing suitable for 1 no 18/20 watt LED tube including necessary connection etc as required (with LM79 report from NABL accredited lab):-(Make:-Havells/ Phillips/ Bajaj). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender