Tender For Supplying And Installation Of 28 Numbers Of Led Street Lights With Poles Including Laying Of Cable, Earthing Pit, Distribution Board, Lights Junction Boxes With Mcb Along The Boundary Wall (Adjacent To Pwd Main Road And Footpath) At Amd Of
Tender Overview
Project Description
Tender for Supplying And Installation Of 28 Numbers Of Led Street Lights With Poles Including Laying Of Cable, Earthing Pit, Distribution Board, Lights Junction Boxes With Mcb Along The Boundary Wall (Adjacent To Pwd Main Road And Footpath) At Amd Office Complex, Shillong
BOQ
| Sl. No. | Item Description |
| 1 | Supply and Erection of size 65 mm diameter metalic Pole appx. upto 7 metre length (as per site condition) in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 Graded stone aggregate 20mm Nominal Size ) PCC foudation of size 45cm legth x 45 cm width x 60 cm depth including street light bracket , GI guard net for street light fabricated from 20 x20x3 mm MS angle frame and 1\\" x1\\" mesh of size 12 SWG , excavation and refilling etc. as required.The pole should have hole for cable antry and nut-bolt set for earthing |
| 2 | Supply & installation of 90 Watt street light with lead wire and connector |
| 3 | Supply & installation of Street Light Junction Box with Connector and 6A to 32 A MCB with termination of cables and wiring for street light |
| 4 | 12mm Cement Plaster in fine sand of mix 1:4 (1 cement : 4 fine sand) |
| 5 | Finishing walls with Acrylic Smooth exterior paint of required shade: on New work (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). |
| 6 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade in two or more coats on new work on circular hollow MS pipes or GI surfaces : 65mm diameter |
| 7 | Supplying, Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size 16 sqmm 4 Core aluminium armoured cable on wall surface as required clamped with 1mm thick saddle |
| 8 | Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 9 | Supplying, Installation, Testing and Commissioning of PVC insulated PVC sheathed copper conductor submersible flat cable 3 Core 1.5 Sqmm Flat Cable ISI Marked in existing metal/ HDPE / PVC/ pipe/ in bore well/ in sump including fixing the cable to GI/HDPE pipe with suitable |
| 10 | Supplying and fixing of 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator ) |
| 11 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of Triple pole and neutral poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 12 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of Single Pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 13 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including all materials , exavation, back filling, accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required |
| 14 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 Eachs of G.I. nut bolt & spring washer spaced at 50mm) |
| 15 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV 4 core 16 sqmm Armoured cable |
| 16 | Cutting of road and making good the same including supply of extra quantities of materials i.e. aggregate , moorum screening , red bajri and labour required : Bituminus portion |
| 17 | Note-1: General Notes 1.For their own interest, contractors are advised to inspect the site with prior permission before quoting their rates. 2. All the dismantled /demolished materials shall be dumped at one place as decided by the department within 150mtr lead. 3. All the samples of materials which are to be used shall be approved by the department in advance. 4. The contractor shall comply with the provision of the Payment of Wages act 5. Rates quoted shall be inclusive of all cost of materials, labour, carriage, taxes, GST, labourcess, water charges, elctricity charges, signorage charges, wastages etc.. 6. Rates quoted shall be excluding the amount of EPFO and ESIC contributions. EPFO and ESIC contributions are reimbursable on production of valid proof of payment made by the contractor as per CPWD norms. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender