Tender For Mtps I Mill Plant Ac Plant Unit Ii Aoh 2026 27 Air Washer System Epoxy Painting Of Blowers And Its Auxiliaries Fabrication Of Ms Tank For Cleaning Of W Type Eliminators Spray Nozzles Flushing Works Providing Handrails In Air Washer
Tender Overview
Project Description
Tender for Mtps I Mill Plant Ac Plant Unit Ii Aoh 2026 27 Air Washer System Epoxy Painting Of Blowers And Its Auxiliaries Fabrication Of Ms Tank For Cleaning Of W Type Eliminators Spray Nozzles Flushing Works Providing Handrails In Air Washer Circulating
BOQ
| Sl. No. | Item Description |
| 1 | Charges for dismantling the casing cover of blowers 2A & 2B for painting and reassembling after completion of painting works. |
| 2 | Charges for scratching and cleaning, painting with epoxy zinc Phosphate /Aromatic Polyurethane primer one coat and epoxy smoke grey paint two coat for structures, spray room tank pipes, eliminator frame, water strainer structure, AWS Blowers 2A & 2B, dampers and ducts. |
| 3 | Charges for dismantling the water spray nipples and nozzles from the pipe line and scratching & cleaning and then re-fixing in the pipe line. |
| 4 | Charges for flushing the spray system pipe line |
| 5 | Charges for Pump complete overhauling and changing the worn out spares parts if necessary. |
| 6 | Charges for Refitting the pump with both suction and discharge pipe flanges with new gasket, coupling the motor with pump, checking axial and radial misalignment between pump and motor and completing the alignment within the prescribed limits and commissioning satisfactory. |
| 7 | Charges for Dismantling the Valves from the pipe line and Overhauling and then refitting of 250 mm / 200 mm AWCW Pump suction and discharge side Gate valves and cleaning of seating surface and lapping of valve gate and seat for perfect matching |
| 8 | Charges for dismantling the existing ‘W’ Type PVC Eliminators from the support angle |
| 9 | Charges for cleaning the ‘W’ Type PVC Eliminators by wire Brush and water wash. |
| 10 | Charges for cleaning the ‘W’ Type PVC Eliminators by chemical solution ( Diluted HCl.) |
| 11 | Charges for fixing the PVC notch plate in the structure and re-assembling the cleaned ‘W’ Type PVC Eliminator in the structure. |
| 12 | Charges for welding joints for spray system vertical service water pipe line coupling and nipple welding work. |
| 13 | Erection of handrails in air washer circulating water pump room by using 40 NB MS pipes by marking, cutting the pipes to the required length, leading and lifting the pipes to the work spot and erection of the pipes |
| 14 | Charges for welding the MS Flat with I Beam and MS Flat with vertical support pipes and handrails in air washer circulating water pump room |
| 15 | Charges for cutting the MS Sheet 3.15mm to the required size to fabricate the tank of size 4000mm x 400mm x 400mm(MS Sheet will be supplied by TNPGCL) |
| 16 | Charges for welding the MS Sheet to fabricate the tank to size 4000mm x 400mm x 400mm and fixing drain pipe with valve |
| 17 | GI bolt (8 mm X 25 mm length) with nuts and GI washer |
| 18 | Cost of Zinc Phosphate /Aromatic Polyurethane Epoxy Primer |
| 19 | Cost of Epoxy paint smoke grey |
| 20 | Cost of Epoxy Thinner |
| 21 | Bearing 6308 |
| 22 | Bearing N 308 |
| 23 | Diluted Hydro chloro acid |
| 24 | Welding Electorde |
| 25 | Cutting Gas Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender