Tender For Certain Special Repairs To Certain Bldgs T-60, T-100, T-78C, T-79B And T-270 At Mil Stn Beas Under Ge Kapurthala
Tender Value
48.10 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
5 days left
EMD
96200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kapurthala → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Special Repairs To Certain Bldgs T-60, T-100, T-78C, T-79B And T-270 At Mil Stn Beas Under Ge Kapurthala
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala 2nd Call Name of Work : Certain special repairs to certain bldgs T-60, T-100, T-78C, T-79B and T-270 at Mil Stn Beas under GE Kapurthala Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed |
| 3 | Dismantling of asbestos cement (corrugated, semi-corrugated, etc;) sheets in roof coverings including ridges, complete all as specified and directed. |
| 4 | Dismantling taking down framed trusses of span not exceeding 10m, complete all as specified and directed. |
| 5 | Taking down chowkats or frames with shutters not exceeding 1.5 sqm each (without taking off shutters from the frames), complete all as specified and directed. |
| 6 | Taking down chowkats or frames with shutters exceeding 1.5 sqm but not exceeding 4 sqm each (without taking off shutters from the frames) complete all as specified and directed. |
| 7 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 8 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 9 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 10 | Demolition reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 11 | Demolition cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 12 | Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving not exceeding 15cm thickness (below or above ground level) etc. complete all as specified and directed. |
| 13 | Dismantling of wall panneling and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thicknness, including cover fillets, complete all as specified and directed. |
| 14 | S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 15 | S&F of pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 16 | Erection and fixing only steel tubular work as in purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 17 | Erection and fixing only steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 18 | SS&F of mild steel work in tubular trusses including spcial shaped washer, vertical Post, including bracket, tee, distance pieces,cleat etc, complete using ERW or induction butt welded tubes, conforming to IS 1161-1979 grade St-240 complete all as specified and directed. |
| 19 | S&F of steel tubular work as in purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240. complete all as specified and directed. |
| 20 | M&L for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed. |
| 21 | M&L for preparation of New steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed. |
| 22 | M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 23 | M&L for cement concrete Type B1, 1:2:4 (20mm graded aggregate)in lintels upto 1.5m clear span, cill, bands, plinth courses, coping etc and similar work, including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 24 | M&L for form work to sides and sofits of floor or roof beam, girders,lintel, cantilever, shelves including supports overhangs, opening of concrete walls, side of RCC/PCC band and lintel in walls, horizontal or slopin and similar work complete all as specified and directed. |
| 25 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to, complete all as specified and directed. |
| 26 | - ditto - all as per item No 24 above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders complete all as specified and directed. |
| 27 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls finished even and fair, complete all as specified and directed. |
| 28 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls finished even and fair, complete all as specified and directed. |
| 29 | M&L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls finished even and fair, complete all as specified and directed. |
| 30 | M&L for preparation of newly plastered surfaces of walls including cornices (plastered or unplastered) and applying three coats of white wash all as specified and as directed. |
| 31 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint over and including a coat of chalk whiting/priming on plastered surfaces of walls, complete all as specified and directed. |
| 32 | M&L for preparation of new plastered surfaces and distempering walls with two coats of distemper oil emulsion, white or tinted over and including 1mm thick wall care putty including primer, complete all as specified and directed. |
| 33 | M&L for preparation of new plastered surfaces and applying two coats of water proof apex over and including a coat of primer on plastered surfaces of walls, complete all as specified and directed. |
| 34 | M&L for preparation of plastered surfaces and applying plaster of paris putty of 2mm thick over old and new plaster surface to prepare the surface even and smooth complete all as specified. |
| 35 | M&L for applying two coats of plastic emulsion paints complete all as specified and directed. |
| 36 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as specified and directed. |
| 37 | M&L for 16-18mm thick zed black granite machine cut in any position bull nosed on front face, laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 20 mm thick screed bed in cement and sand mortar 1:4 complete all as specified and directed. |
| 38 | M&L for machine cut kota stone slab flooring 16-18 mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed. |
| 39 | M&L for machine cut kota stone slab flooring 16-18 mm thick over and incl 10 mm thick rendering in cement and sand mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in riser of steps/ pillars/ skirting/ dado including rubbing and polishing complete all as specified and directed. |
| 40 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed .. |
| 41 | M&L for joint free non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 42 | M&L for coloured glazed ceramic tiles in vertical surface 450x300x7 mm thick laid over 10mm thick plaster in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed. |
| 43 | M&L for vitrified ceramic tiles 8-9 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.42sqm but not exceeding 1.00 Sqm, in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match. incl 15mm thick screed bed/bedding layers in cement mortar 1:4 complete all as specified and directed. |
| 44 | S&F of non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sq.m. but not exceeding 0.18sq.m, in floors etc, set and jointed in neat cement slurry and pointed in white or colours cement to match with tiles and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 45 | M&L for HD digital glossy finish wall tiles coloured of size 300x600x10 mm thick, jointed in neat cement slurry and poiting in colour cement to match inlcuding 10mm thick plaster in cm 1:4 complete all as specified and directed |
| 46 | M&L for precast cement concrete type B-1, 1:2:4 as in cover slabs over drain/manholes etc. including necessary formwork, complete all as specified and directed . |
| 47 | M&L for 100mm thick cement concrete type C2 1:3:6 (40mm graded stone aggregate) in sub base, complete all as specified and directed. |
| 48 | M&L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in sunb base of flooring finished even and smooth (without using extra cement), complete all as specified and directed. |
| 49 | M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in plinth protection finished even and smooth (without using extra cement), complete all as specified and directed. |
| 50 | M&L for RCC 1:11/2:3 , type A-0, using 12.5 mm nominal size graded crushed stone aggregate as in chajjas, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including 5mm thick rendering in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed. |
| 51 | Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal/sloping), fair finished surfaces concrete flat, complete all as specified and directed .. |
| 52 | M&L for ceiling using 8-9mm thick gypsum based ceiling tiles with wheather resistance face on back side and vinyl finish including framework on the front fixed in 24mm GI armstrong frame work of grid 600x600 mm size, the members of snap grid frame work of GI/Steel section of 24mm wide with T-flanges, channels etc of white colour having rotary stiching on all members, i.e main runner, 1200x600mm cross tee galvanised with minimum thickness of 120 gms per/sqm passed through 500 hrs test and hanging the same with existing roof members such as rafters, pulins or other wooden members particularly provided for hanging pupose using 8mm dia mild steel bar of required length fixed with nut bolt of 50mm long and 10mm dia of neck with washer flat iron 50x6mm thick clamps etc to steel members, complete all as specified and directed. |
| 53 | S&F of 6mm thick PVC hollow wall paneling plain/coloured/printed fixed with screws to wall and corner, edges of panels be sealed with appropriate arrangement, colour and pattern as approved complete all as specified and as directed. |
| 54 | S&F for box type steel windows/ventilators comprised of tubular frame and shutters made out of 1.25mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos. tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg welded to F I frame work, including other fittings; hinges, handles, tarred hold fasts, PCC blocks etc complete all as specified and directed. |
| 55 | S&F of steel ventilator 1.25mm thick box type fixed type prepared for fixing of gauzed and glass (primer coated) ERW hollow P secton of size 60mmx25mm including cutting holes and making good dismantled portion in PCC (1:3:6) type C-1 four Nos for each vent) including following fitting welded to frame shutter: (a) shape-04 Nos per vent (b) Handles of Z Sec 20mm x 100mm long (c) Stay (d) Cleat 55mm long of hollow square 15mm x20mmx63mm welded to hinges - 01 No per leaf (e) Mild steel Pintal hinges of size 75mm x 75mm x 12mm - 02 Nos (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Wire mesh/glass pane and painting shall be masure and paid separately under appropriate item etc. complete all as specified and directed . |
| 56 | S&F of solid PVC door frame of size 50mm x47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube and edges will be painted to match with printed sheets, suppyling & fixing in opening as per specification & drawing, complete all as specified and directed |
| 57 | S&F of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; & 5mm thick x 15mm wide PVC sheet beading use inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree)used. Panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed |
| 58 | All as per item No no above but wire gauzed i.e panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrappd on an additional square 8mm MS solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed . |
| 59 | Supply only 4mm thick figured glass, pinhead type in squares not exceeding 0.5 sqm each pane. complete all as specified and directed . |
| 60 | M&L for framed work as in doors or gates and chowkhats of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165), complete all as specified and directed. |
| 61 | S&F of factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed. |
| 62 | S&F of 4mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sq. m in each pane complete all as specified and directed. |
| 63 | S & F, 150 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed complete all as specified and as directed. |
| 64 | S&F, 150mm size aluminium handles, cast type, anodized and fixed complete all as specified & as directed. |
| 65 | S&F of mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed. |
| 66 | S&F of mild steel barrel tower bolts 200mm long, stove enamelled black, with bright bolt and fixed, complete all as specified and directed. |
| 67 | S&F of mild steel pressed handles of size 150mm, oval type, stove enamelled black, complete all as specified and directed. |
| 68 | S&F of butt hinges 100mm size, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed. |
| 69 | S&F in repair anodised aluminium alloy curtain rail chromium plated with fixing brackets, stops, roller etc complete all as specified |
| 70 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide primer, complete all as specified and directed. |
| 71 | S&F of galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wodden beads to steel windows/wodden doors complete all as specified and directed. |
| 72 | S&F powder coated anodised aluminium frame (thickness of powder coating not less than 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc; complete all as specified and directed. |
| 73 | M&L for aluminium anodised doors standard jindal or equivalent section size 64x38x1.4mm for frame and section size 47x25x2mm for vertical style section size 46.72x44.45x1.4mm for top and central rail section size95x44.45x2mm for bottomrail,section size 19x17.3x0.80mm for glazing clip for shutter including fabrication to required size and fixed with 5mm thick sheet glass ordinary quality in top pannel and 12mm thick pre laminated particle board exterior grade pre laminated both sides with decorative choice lamination includind fitting etc with door closer,handle,mortise lock heavy duty and door spring heavy duty complete all as specified. |
| 74 | S&F of powder coated anodised aluminium window sliding triple track bottom track 130x48x1.4mm Side and top frame 130x48x1.4mm shutter of Top & middle rail 39x17x1.40 mm, Outer style 39x17x1.4 mm, Interlock style 39x27x1.4 mm, including necessary 5 mm thick glass, spring cather Glazing clip 19x17.3x.8 mm joining cleats, , rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as locking arrangements and handles on each shutter complete all as specified and directed. |
| 75 | S&F of aluminium diamond grill security window with flyscreens, average width of aperture 75mm, premium quality security window with 20mm frame(thickness) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and directed. |
| 76 | S&F of aluminium alloy wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified & directed. |
| 77 | S&F of zebra roller blinds curtains fabric (minimum weight of the fabric 270g/sqm) wraps with roller on the top of the doors and window with complete all fittings and fixtures as specified and directed. |
| 78 | S&F of 25mm dia steel curtain rod, powder coated having wall thickness 1mm with aluminium powder coated brackets, stops, rollers,ebd caps, curtain rings etc complete all as specified and directed. |
| 79 | S&F of floor door stopper 140mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor all as specified and directed. |
| 80 | S&F in repairs vitreous china urinal, half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement (excluding flushing cistern with brackets, flush pipe, grating and union for discharge pipe) complete all as specified and directed . |
| 81 | S&F of urinal spreader of PTMT any colour for fixing with 15mm dia pipe (min weight 60gms) complete all as specified and as directed. |
| 82 | S&F in repair vitreous china wash down water closet pan (one piece floor mount)\\"with seamless style with soft close lid complete all as specified and directed |
| 83 | S&F of vitreous china counter top wash hand basin oval type, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc with pedestal complete all as specified and directed. |
| 84 | S&F of 32mm waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60 gms) with PVC waste pipe for wash hand basin fixed in repair complete all as specified and as directed. |
| 85 | S&F in repair frameless bevelled mirror for bathrooms wall and office, 18x24 Inch (Silver) and 5mm thick looking mirror and bevelled edge of mirror for 0.75 Inch, edge thickness shall be 4mm, fitted to wooden plug with CP screws. complete all as specified and as directed. |
| 86 | S&F of toilet paper holder with flat recessed type stainless steel , chromium plated fixed with brass screws complete all as specified and as directed. |
| 87 | S&F of health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 88 | S&F of sheet glass shelf PTMT assembly consisting of 5.5mm thick sheet glass shelf 12cm wide fixed with including chromium plated screw, bracket guard and railing 60cm long complete all as specified and directed. |
| 89 | S&F of tubular towel rail brass chromium plated, D type, 60cm long between flange complete all as specified and directed. |
| 90 | S&F of 15mm bore bib tap long body, cast copper alloy with crutch , chromium plated, fancy type, screwed down, screwed for iron pipe and fixed, complete all as specified and directed. |
| 91 | S&F of 15mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 92 | Supply and fix in repair, 15mm bore Stop Valve/angle valve , cast copper alloy with crutch , chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or fpr unions and fixed, complete all as specified and directed. |
| 93 | S&F of floor grating 100mm dia of PTMT.(Minimum weight 25gms) |
| 94 | S&F in repairs brass chromium plated shower rose with or without swivel joints, 125mm size with arm including fixing to steel pipe or union complete all as specified and directed . |
| 95 | S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern, low level with inlet ball valve float, handle, aluminium brackets for bottom support, including flush pipe 32mm bore fixing in position complete all as specified and directed. |
| 96 | S&F of PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 97 | S&F of PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 98 | S&F in repairs fancy type swan neck pillar tap, cast copper alloy, with capstan heads, 15mm bore dia of pipe chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 99 | Taking up or down, steel tubing 15mm bore and connections including cleaning for refixing and removal from site complete all as specified and as directed. |
| 100 | S&F 15mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall, ceiling or laid in floors complete all as specified and directed. |
| 101 | Taking up or down, steel tubing 20mm bore and connections including cleaning for refixing and removal from site complete all as specified and as directed. |
| 102 | S&F of 20mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall, ceiling or laid in floorscomplete all as specified and directed. |
| 103 | Demolition and breaking up 200mm bore drain pipes (salt glazed ware or AC pipe) set in cement mortar and taking out from trenches complete all as specified. |
| 104 | Supply & lay 200mm bore reinforced concrete pipes, class NP3, laid and jointed complete with collars, ccomplete all as specified and directed . |
| 105 | M&L for cement concrete 1:3:6 type C-2 as in concrete bed to drain pipes for bore dia of 200mm including packing under, and haunching against the sides of pipes after they are laid and tested; in, complete all as specified and directed . |
| 106 | M&L for RCC NP2 pipe 150mm dia bore and jointed complete with collars as in culvert complete all as specified and directed. |
| 107 | M&L for cement concrete ( 1:3:6, type C2) bed to drain pipes of 150mm bore dia including packing under and haunching against the sides of pipes after they are laid and tested all as specified and directed. |
| 108 | Excavation in trenches, n.exc 1.5 mtr wide & n.exc 1.5 mtr depth for foundation, etc, or for shafts, wells, casspits, manholes, pierholes etc; n.exc 10 sqm on plan & n.exc 1.50m in depth and getting out in soft and loose soil complete all as specified & directed. |
| 109 | Returning, filling in, including spreading, leveling, watering and well ramming the approved soil/earth in layers n.exc 25 cm thick in any type of soil complete all as specified and directed. |
| 110 | Removing excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified & directed. |
| 111 | M&L for pre-construction antitermite treatment by treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed by Engineer-in-chagre. |
| 112 | M&L for cast Iron floor trap 75mm, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 113 | S&F of PVC (SWR) gully Trap 125/110mm, setting and jointing with solvent cement,complete all as specified and directed. |
| 114 | S&F of rotational moulded polyethylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including 20mm dia ball brass valve, complete all as specified and directed. |
| 115 | S&F of gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to steel pipe or union, 20mm bore dia of pipe. complete all as specified and directed. |
| 116 | S&F of 25 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0mm-210gms./25mm-55gms/ 40mm - 690 gms) etc, all as specified and directed. . |
| 117 | M&L for soakage wells excavation in any type of soil, foundation in PCC 1:3:6 walls of honeycombed masonry with top ring of m-25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M-25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4 m dia x 4.50 m effective depth. |
| 118 | Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all asspecified. |
| 119 | Supplying and filling sand under floors or in foundations including watering and consolidation, complete all as specified and directed. |
| 120 | M&L for machine pressed precast concrete interlocking paver block, 80mm thick, any shape and size, confirming to IS-15658-2006, M-40 Grade, with grey cement and no pigment complete all as specified and directed. |
| 121 | Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed. |
| 122 | S&F of 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints laidin trenches or in floors complete all as specified and directed. |
| 123 | S&F of 75 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints laidin trenches or in floors complete all as specified and directed. |
| 124 | S&F of 110 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 125 | S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal . complete all as specified and directed. |
| 126 | S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal. complete all as specified and directed. |
| 127 | S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal. complete all as specified and directed. |
| 128 | S&F of PVC cowl 75mm bore fixed, with pipe complete all asspecified. |
| 129 | S&F of 18mm thick prelaminated WPC, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in any situation as in cup board shelves/shutter, kithen cabinet shutter or similar work inclding dismantling of old board in any position, complete all as specified and directed.Note:- Timber frame work for fixing of prelaminated board as in shelves is included in this item. |
| 130 | M&L for 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed. |
| 131 | S&F of ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 132 | S&F of mild steel tee hinges 150 mm, stove enamelled black, medium type, and fixed complete all as specified and directed. |
| 133 | Taking down carefully aluminium / copper point wiring (light, fan, socket, powerpoint) including batten, conduit and fittings such as switches, ceiling rose, sockets, brackets, light fittings, switch board etc, making good distrubed surfaces of wall, floar, ceiling etc; complete all as directed. |
| 134 | M&L for point wiring for one light / fan / bell point with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor ( FRLS ) 1100 Volts grade cable ( red colour cable to be used for live connection and black colour cable to be used for neutral connection ) controlled by one way switch drown through and including PVC concealed conduit ( modular Fitting) with all accessories including 1.5 sqmm copper multistrand conductor (FRLS ) 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel metal flush mounting box for mounting of fittings like switch , socket and fan regulator and cover plat of suitable modules capacity and make of swich socket complete all as specified and as directed. |
| 135 | One light point controlled by one, one way switch |
| 136 | One fan point controlled by one, one way switch |
| 137 | One socket outlet 3 Pin, 5 Amp on independent board |
| 138 | One socket outlet 3 Pin, 5 Amp on same board. |
| 139 | One bell point controlled by one bell push |
| 140 | - ditto - all as per item No 133 here in before but 2.5 Sqmm PVC insulated un sheathed cable with stranded copper conductor for 6 pin 6/16 Amp switch socket combination on independent board. |
| 141 | - ditto - all as per item No 133 here in before but 4.0 Sqmm PVC insulated un sheathed cable with stranded copper conductor for 6 pin 6/16 Amp switch socket combination on independent board complete all as specified and directed. |
| 142 | M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked) |
| 143 | S&F in repair bell push flush type 5 amp complete all as specified and directed. |
| 144 | S&F in repair buzzer/ding dong, A C , 230 volt single pole complete all as specified and directed. |
| 145 | S&F of PVC/polycarbonate lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings type with back plate suitable for batten fittings complete all as specified and as directed. |
| 146 | S&F of modular switch 6 Amp 250 V AC one way one module complete all as specified and directed. |
| 147 | S&F of modular switch 16 Amp 250 V AC one way with indicator one module complete all as specified and directed. |
| 148 | S&F of modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. |
| 149 | S&F of modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 150 | S&F in repair modular fan regulator step type, 120W - 2 module complete all as specified and directed. |
| 151 | Taking doun old unsv sub main and M&L for sub main wiring with five runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 10.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size not less thgan 25 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 10.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engineer-in-Charge. Note : Two run of 10.00 Sqmm cable one run of 6.00 Sqmm cable as earth continuity conductor and one run of PVC Conduit shall be measured & paid as one unit.) |
| 152 | Supply, installation, testing and commissioning of 20 watt 4 ft long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000 K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 all as specified and directed. |
| 153 | S&F of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete |
| 154 | S&F of LED Security light fitting 35 watt Pressure die cast aluminium housing, heat resistant toughened glass with frame IP 66 Protection cat Part No LSTN-30-CDL complete fitting including 1.5 mtr long 40/50 mm (Suitable size for fixing of LED light fitting) bore GI pipe mounting bracket/Clamp made to shape for fixing on pole with 40 mm x 6 mm flat iron clamp 02 numbers with 16 mm dia bolts, nuts and washers all as specified and directed by Engineer-in-Charge. |
| 155 | S&F in repair sheet metal enclosure for MCB DB double door single pole and neutral 8 way with 200 Amps rated bus bar. |
| 156 | S&F in repair sheet metal enclosure for MCB DB double door single pole and neutral 12 way with 200 Amps rated bus bar. |
| 157 | S&F in repair sheet metal enclosure for MCB DB double door triple pole and neutral 6 way with 200 Amps rated bus bar. |
| 158 | S&F in repair SP 6 To 32 AMP amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 159 | - ditto - all as per above item No. 152 but SPN 40 to 63 AMP complete all as specified and directed. |
| 160 | - ditto - all as per above item No. 152 but TPN 40 to 100 AMP complete all as specified and directed. |
| 161 | S&F in repair ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with brushless direct current motor ( BLDC) complete all as specified and directed. |
| 162 | S&F in repair exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, copper winding of sweep 250mm complete all as specified and directed. |
| 163 | S&F in repair water heater storage type electric, capacity 25 litres BEE 5 star BEE rating AC 230 volts, 50 Hz vertical type including material and labour for grouting four Nos rack bolt for holding of water heater on wall including making good and match existing surfaces and complete all as specified and as directed. |
| 164 | Supply, laying, jointing and testing XLPE PVC insulated & PVC sheathed LT cable, 1100 volts grade (heavy duty )with stranded aluminium conductor, cross sectional area 35 Sqmm 3.5 core fixed along the poles or passing through pipes or laid under floors or through walls complete all as specified.Note:- Earthwork, sand cushioning, brick protection and GI pipe to be measured and paid for separately under respective items. |
| 165 | Supply, laying, jointing and testing XLPE PVC insulated & PVC sheathed LT cable, 1100 volts grade (heavy duty )with stranded aluminium conductor, cross sectional area 25 Sqmm 2 core fixed along the poles or passing through pipes or laid under floors or through walls complete all as specified.Note:- Earthwork, sand cushioning, brick protection and GI pipe to be measured and paid for separately under respective items. |
| 166 | Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and getting out including trimming of sides complete all as specified and directed. |
| 167 | Returing, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer compete all as specified and directed. |
| 168 | Removal of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 169 | M&L for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified. |
| 170 | Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed. |
| 171 | M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender