Defence Statutory Bodies & Commissions/Committees Closing in 15 days TDR #57942191

Tender For Provn Of Asv Shed And Certain B/R And E/M Works In A Sqn And Construction Of Reinforced Cement Concrete Wall In Tech Area At Af Stn Gwalior

Issued by Statutory Bodies & Commissions/Committees · Gwalior, Madhya Pradesh
Tender Value
46.10 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
15 days left
EMD
92200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provn Of Asv Shed And Certain B/R And E/M Works In A Sqn And Construction Of Reinforced Cement Concrete Wall In Tech Area At Af Stn Gwalior

BOQ

Name of Work:- PROVN OF ASV SHED AND CERTAIN B/R AND E/M WORKS IN A SQN AND CONSTRUCTION OF RCC WALL IN TECH AREA AT AF STN GWALIOR
Sl. No. Item Description
1Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil all as specified and directed.
2Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in any type of soil all as specified and directed.
3Ditto all as per item No 2 but depth exceeding 1.5 m and not exceeding 3 m all as specified and directed.
4M&L for PCC 1:4:8 type D2 using 40mm graded aggregate as in foundation, filling and mass concrete all as specified and directed.
5Use and waste of formwork to sides of concrete foundations, footings, bases of columns raft and raft beams sides and soffits of foundation and plinth beam and similar work vertical or to batter all as specified and directed.
6Use and waste of formwork to sides of pillars, posts, struts, piers, column and stanchions for rough finished surfaces of concrete square, Circular rectangular on plan or polygonal all as specified and directed.
7Use and waste of formwork to sides of sides and soffits of floor or roof beams, beam hauncheing, girders, bressmmers, lintels cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc all as specified and directed.
8Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) all as specified and directed.
9M&L for Reinforced cement concrete M25 (Design Mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete all as specified and directed.
10M&L for Reinforced cement concrete M25 (Design Mix) using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts all as specified and directed.
11M&L for Reinforced cement concrete M25 (Design Mix) using 20 mm graded stone aggregate as Slab supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck salb and in shelves and the like all as specified and directed.
12M&L for Reinforced cement concrete M25 (Design Mix) using 20 mm graded stone aggregate as beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed.
13M&L for Mild steel TMT reinforcement Bars of 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clip all as specified and directed.
14M&L for Mild steel TMT reinforcement bars of 5 mm dia and over up to 10 mm dia in stirrups, spacers and binders, cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire annealed not less than 0.9 mm dia or securing with clip all as specified and directed.
15Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and directed.
16Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed.
17M&L for brick work with sub class 'B' bricks , straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed.
18M&L for Hard core of gauge n.exc 63 mm , with broken stone or boulders , deposited, spread and levelled in layers n.exc 15 cm thick, watered and well rammed to a true surface all as specified and as directed.
19M&L for 100 mm thick PCC 1:4:8 type D-2, (using 40 mm graded aggregate) as sub base finished even and smooth with using extra cement complete as specified and directed. complete all as specified and directed.
20Roughning of surface of concrete floor by picking, sweeping clean and washing down with water to remove dust, etc, Brushing neat cement slurry with 3.0kg of cement per sq. metre and providing 40 mm thick providing Cement concrete type B-1, 1:2:4 (20 mm graded aggregate) in sub-base, sub floors, paving etc Finishing cement concrete surface even and smooth without using extra cementall as specified and directed.
21M&L for 75m mm thick plain cement concrete type C-2, 1:3:6 mix using 20mm graded stone aggregate as in plinth protection, pavings, path etc. surface finished even and smooth without using extra cement complete as specified and directed.
22M&L cement concrete 1:4:8 Type D-2 (40mm graded Stone aggregate) as in foundation filling and mass concrete all as specified and directed.
23M&L for Rendering 10 mm thick in cement plaster 1:6 on fair faces of concrete surfaces finished even and smooth without using extra cement all as specified and directed.
24M&L for preparation of new plastered surfaces on walls and applying two coats of distemper oil emulsion with roller over one coat of primer white or tinted as approved complete all as specified and directed.
25M & L 15 mm thick rendering in CM 1:4 on fair faces of bricks/concrete, finished even & smooth without using extra cement and mixed with water proofing compound (liquid type) @ 200 ml per 50 Kg of cement complete all as specified and directed by Engineer-in-Charge. (Note : WPC (liquid type) shall be measured and paid separately as supply only)
26M&L for Preparation of newly plastered surface and applying two coat of weather coat exterior emulsion white or tinted by the use of rollers over a coat of primer as approved complete all as specified and directed.
27Supply only Liquid water proofing compound.
28M&L for Rendering 5 mm thick in cement plaster 1:3 on ceiling surface finished even and smooth without using extra cement all as specified and directed.
29M & L preperation of surfaces and applying three coats of white wash as in ceiling surface complete all as specified and directed.
30M & L for 10 mm thick screed bed in cement mortar 1:4 mixed with using liquid water proofing compound as per manufacturers instructions (Note:Water proofing compound shall be measured and paid seprerately under respective item of \\"BoQ\\")
31M&L for hybrid (acrylic+ polyurethene) based waterproofing flexible liquid applied membrane single component, three coat system reinforced with fibre mesh having crack bridging upto 2mm and elongation upto 200% and dry film thickness(DFT) 1000 microns with Heat reflective system for all types of exposed roof slabs (new and old) terraces (sloped and flat) complete all as specified and directed.
32M&L for demolition of cement concrete of any description and in any position not otherwise specifically provided all as specified and directed.
33M&L for Reinforced cement concrete M25 (Design Mix) using 20 mm graded stone aggregate as Walls, retaining walls,basement walls, ballast walls and the like; anythickness; above top of footings; including attached pilasters and buttresses all as specified and directed.(
34M&L for Rendering 10 mm thick in cement plaster 1:4 on fair faces of concrete surfaces finished even and smooth without using extra cement all as specified and directed.
35M & L preperation of surfaces and applying three coats of white wash as in wall surface complete all as specified and directed.
36Use and waste of formwork to faces of walls,retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters, buttresses,etc.; vertical or to batter fair finished surface complete all as specified and directed.
37M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
38Supplying ,Laying, jointing and testing XLPE insulated, armoured, heavy duty, aluminum conductor cable 10 sqmm 4 core 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.:
39M&L for point wiring with stranded copper conductor 1.5. Sqmm 1100 Volts grade FRLS PVC insulated and unsheathed including 20mm dia medium grade PVC conduit including all accessories, copper conductor cable 1.5 Sqmm insulated and unsheathed PVC cables as earth wire, modular terminal boxes closed recessed type.PVC modular shhet and board complete all as specified and directed for the following :-
40(a) One light/ Fan point controlled by one way switch.
41(b ) One 5 Amps switch socket combination on independent board.
42(c) One 5 Amps socket on same board with other switches.
43All as per item here in above but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point as directed.
44S&F Modular switch 1 way 6A, 1 module single pole 230 V.
45S&F Modular type switch socket out let 3 pin 6 Amps flush type 230 Volts multipurpose,
46All as per item here-in-before above but 6 Amps and 16 Amps multipurpose( 3 Pin 16 Amps and one pin 6 Amps controlled by one switch)
47Supply, fixing, connecting & testing of sheet metal enclosures single door (IP-42 Protection), single pole and neutral, 8 way DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating complete all as specified and directed.
48Supplying and fixing 40 to 63 A rating, 240 V,10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load fixed in MCB DB complete all as specified and directed.
49Supplying and fixing 6 A to 32 A rating, 240 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive loadfixed in MCB DB complete all as specified and directed.
50Supply& Fixing LED Batten fittings 1x20 Watt complete with round block etc, incl PVC gutties and flexible wire and connecting to ceiling rose complete all as specified and directed by Engineer-in-Charge.
51Supply and fixing of LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed by Engr-in-charge.
52Supply and fixing of LED building security/street light light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engineer-in-Charge.
53S&F ceiling rose surface backelet ISI marked , 2 to 3 terminal all as specified and directed. Please Enable Macros to View BoQ information
54S&F ceiling rose surface backelet ISI marked , 2 to 3 terminal all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57942191
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 46.10 Lakhs
LAST DATE 30-10-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provn Of Asv Shed And Certain B/R And E/M Works In A Sqn And Construction Of Reinforced Cement Concrete Wall In Tech Area At Af Stn Gwalior
Basic Detail
Tender No 8900/1707/GWL/E8
Bidding Type Tender
Location
City Gwalior
State Madhya Pradesh
Key Dates
Publish Date 09 Oct 2026
Submission Date 30 Oct 2026
Open Date 06 Nov 2026
Finance
Tender Value 46.10 Lakhs
Tender Fee 500
EMD 92200
Exemption Available
Document List
af57d7e3-0818-4a22-8959-585f3fab3eb8.html
BOQ_889234.xls
tender1707.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 09, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 15 days
Nov 06, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 22 days

Tender Documents

Download All (ZIP) ↓
html

af57d7e3-0818-4a22-8959-585f3fab3eb8.html

xls

BOQ_889234.xls

pdf

tender1707.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender