Tender For Special Repairs To Bldg No T-10 Of 220 Transit C At Rms
Tender Value
41 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
16 days left
EMD
82000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wokha → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Bldg No T-10 Of 220 Transit C At Rms
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors laid over and including 15mm thick screed bed for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles including cement mortar bedding of any description and removing rubbish off the premises complete all as specified and as directed. |
| 2 | M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick backing coat in cement mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles including cement mortar bedding of any description and removing rubbish off the premises complete all as specified and as directed. |
| 3 | M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors laid over and including 15mm thick screed bed for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles including cement mortar bedding of any description and removing rubbish off the premises complete all as specified and as directed. |
| 4 | M&L for Glazed ceramic coloured tiles in vertical surface including high lighter/strips of tile size 450X 350X 7 mm,/350 x 250 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over and including backing coat of 10 mm thick in CM (1:4) including dismantling of old tiles including cement mortar bedding of any description and removing rubbish off the premises complete all as specified and as directed. |
| 5 | S&F in repairs for 4 mm thick of size 600x600mm HPSC (high pressure Steam Cured) pre-painted self embossed, textured designer board E-Board Classic to be fixed with and including GI grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 4mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size and finally applying two coats of oil bound distemper complete all as specified and as directed. |
| 6 | S&F in repairs Pre-painted galvalume aluminum zinc coating GI based corrugated trapezoidal steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed. |
| 7 | S&F in repairs Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed. |
| 8 | M&L for second class hardwood as in scantlings clean sawn timber fixed including dismantling of old unserviceable scantling from its positions complete all as specified and as directed. |
| 9 | Taking down chowkhat or frames not exceeding 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and as directed. |
| 10 | Taking down chowkhat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed. |
| 11 | Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 12 | M&L for factory made 35 mm thick flush shutter, solid core construction, with particle board core and plywood face panels, commercial type on both side fixed to chowkats complete all as specified and as directed. |
| 13 | M&L for factory made 30mm thick 2nd class hard wood Glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified and as directed. |
| 14 | S&F in repair mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 15 | S&F in repair mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender