Tender For Provision Of Plain Cement Concrete Flooring At Laxmipur, Construction Of Perimeter Wall At Shibpur And special Rep Of Toilets In P-468 And P-469 At Durgapur And Under Ge(S) Diglipur.
Tender Value
29 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
5 days left
EMD
58000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
North and Middle Andaman → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Plain Cement Concrete Flooring At Laxmipur, Construction Of Perimeter Wall At Shibpur And special Rep Of Toilets In P-468 And P-469 At Durgapur And Under Ge(S) Diglipur.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches, n. exc.1.5m wide and n.exc. 1.5m deep; for foundation etc n.exc.10 Sqm on plan and getting out any type of soil complete all as specified and directed. |
| 2 | M&L for PCC (1:4:8) type-D2, (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 3 | M&L for PCC (1:2:4), type-B1, (using 20mm graded stone aggregate) as in foundations incl rafts, footings, foundation beam etc complete all as specified and directed. |
| 4 | M&L for PCC (1:2:4), type-B1, (using 20mm graded stone aggregate) as in columns, pillars, piers posts and struts etc complete all as specified and directed. |
| 5 | Use and Waste for Form work to sides concrete foundations, Plinth beams etc on flat surfaces complete all as specified and directed. |
| 6 | Use and Waste for Form work to sides columns, pillers etc on flat surfaces complete all as specified and directed. |
| 7 | M&L for Precast Cement Concrete block masonry with hollow blocks, exc. 10 cm in width and setting in CM (1:4), (1:3:6) type-C1 (using 20mm graded aggregates) complete all as specified and as directed. |
| 8 | M&L for Precast Cement Concrete block masonry with solid blocks, exc. 10 cm in width and setting in CM (1:4), (1:3:6) type-C1 (using 20mm graded aggregates) complete all as specified and as directed. |
| 9 | M&L for 15mm thick for rendering fair faces of brick work or Concrete surface in CM (1:4) as finishing mixed with integral water proofing compound as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compund shall be measured and paied seperately |
| 10 | M&L for preparation of new plastered surface of wall, and applying two or more coats of premium acrylic exterior emulsion paint of required shade includling priming coat of exterior primer applied @ 0.90 ltr/10 Sqm complete all as spd and directed. |
| 11 | Supply only liquid water poofing compound complete all as specified and as directed. |
| 12 | Forming square grooves in plaster n.exc. 12mm deep and n.exc. 15mm on face complete all as specified and as directed. |
| 13 | M&L for mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 14 | M&L for mild steel TMT bars, 5mm dia and over up to including 10mm dia in stirrups, cut to length, bent to shape required, including bending for columns, beams hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 15 | M&L for Steel work in tubular trusses, Purlin,Post etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and as directed. |
| 16 | M&L for framed work in grills / gates work of FE-290 (Gde E-165) also fastening and fixing complete all as specified and as directed. |
| 17 | M&L for preparation of newly steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and as directed. |
| 18 | Returning filling including spreding, leveling, watering and well ramming in layout n.exc. 25cm in soft and loose soil complete all as specified and as directed. |
| 19 | Removal of excavated material n.exc.50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and as directed. |
| 20 | Dismantling ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 21 | S&F Non AC plain building board 6mm thick ceiling fixed with size of grid 605x605mm, anodised aluminium snap grid (main/cross tee section) shall be supported at ends all along the wall with aluminium angle of size 40mm x 25mm x 2mm and the main and cross tees shall be joined at junction/crossings with anodized aluminium angle bracket of size 15mm 15mm x1.5mm frame work for false ceiling with hangers 6mm dia G.I. complete all as specified and as directed. |
| 22 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 23 | M&L for 25 mm thick cement concrete (1:2:4) type-B0 (using 12.5mm graded stone aggregate) as sub base of flooring complete all as specified and as directed. |
| 24 | M&L for Non-skid coloured Ceramic tiles 7 to 8 mm thick (square rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screeding 15mm thick on floor surfaces, in cement and sand mortar (1:6) complete all as specified and as directed. |
| 25 | M&L for Glazed coloured Ceramic tiles in vertical surface 450 x 300 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screeding 10mm thick on floor surfaces, in cement and sand mortar (1:4) complete all as specified and as directed. |
| 26 | Taking down at any description at any position chowkat or frames with shutters (without taking off shutters from the frames exc. 1.5 Sqm and n.exc. 4.0 Sqm each) complete all as specified and as directed. |
| 27 | Taking down at any description at any position chowkat or frames with shutters (without taking off shutters from the frames n.exc. 1.5 Sqm each) complete all as specified and as directed. |
| 28 | S&F Powder coated anodised aluminium frame for doors, windows, ventilators with or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 29 | S&F Powder Coated anodised Anodised aluminium window and ventilator shutters, with 4.8 mm thick tinted/frosted glass side hung type/fixed without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed. |
| 30 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window Cestory windows & other Frames/Chowkat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. |
| 31 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed.Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) complete all as specified and as directed. |
| 32 | S&F for 200mm long, Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 33 | S&F for 125mm Butt hinges, stainless steel type B-21 complete all as specified and as directed. |
| 34 | S&F for aluminium anodised, 150mm long barrel tower bolts of extruded section complete all as specified and as directed. |
| 35 | S&F aluminium alloy anodised handle, fabricated type 150mm long complete all as specified and as directed. |
| 36 | S&F Aluminium (Extruded section) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed. |
| 37 | S&F 150mm Aluminium floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 38 | S&F vitreous china wash down water closet pan EWC white with seat and cover (excluding flushing cistern & Pipe) including connection to trap and flushing pipe complete all as specified and as directed. |
| 39 | S&F PVC low level flushing cistern of 10 ltr capacity fixed including syphonic action type ball valve, float and handle including brackets etc complete all as specified and as directed. |
| 40 | S&F PVC connections 15mm size with PTM nuts and washers for 600mm long pipe complete all as specified and as directed. |
| 41 | S&F for Wash basins, vitreous china white counter top type of size 630 x 450mm, including fixing necessary work, CP waste coupling of 32mm dia half or full threaded with 600mm long PVC waste pipe and Grating doom 125 mm dia with waste hole of stainless steel CP, PVC connections 15mm size with PTMT nuts , 15mm bore CP pillar tap cast copper alloy fancy type swan neck screwed down high pressure, with long screwed shank and fancy type stop valves 15mm bore CP cast copper alloy, screwed down, high pressure with crutch or butterfly handle complete all as specified and as directed. |
| 42 | Ditto all as per item no 41 above but counter top (oval shape) type fixing above counter including cutting hole for drain pipe making it suitable for retrofitting Ditto |
| 43 | M&L for Granite (of any type) 18-20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms wash basin area, partition for urinal and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite complete all as specified and as directed. |
| 44 | S&F Vitreous China Urinal, full stall type, white with 600mm long PVC waste pipe and Grating doom 125 mm dia with waste hole of stainless steel CP and waste coupling including fixing plugs, PVC connection with push cock, bedding urinal against wall in CM (1:2) securing urinals to plugs including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed. |
| 45 | S&F Bib taps of 15mm dia chromium plated cast copper alloy of fancy type screwed down for iron pipe complete all as specified and directed. |
| 46 | S&F 2 in 1 Bib taps of 15mm dia chromium plated cast copper alloy of fancy type screwed down for iron pipe including Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook complete all as specified and as directed. |
| 47 | S&F of 5 mm thick selected quality glass bevelled edge bathroom mirror of size 600mm x 450mm, including edges cut and polished at a specific angle to create decorative, frameless design, fitted with stainless steel flat head mirror stud including all necessary work like drilling, fixing etc complete all as specified and as directed. |
| 48 | S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and as directed. |
| 49 | M&L for Cast iron floor trap, (100 mm) with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed. |
| 50 | S&F Soap dish holder, approximate size 160 x 160 x 90mm, any type, fixed to plugs with chrome plated brass screws complete all as specified and as directed. |
| 51 | S&F PVC (SWR) pipes 75 mm dia, single socketed, in any length with rubber rings joints, laid in trenches or in floors complete all as specified and as directed. |
| 52 | Ditto all as per item no 51 above but PVC (SWR) pipes 110 mm dia ditto |
| 53 | S&F 75 mm PVC (SWR) bends any radius complete all as specified and as directed. |
| 54 | Ditto all as per item no 53 above but PVC (SWR) bends 110 mm dia ditto |
| 55 | Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in walls and ceiling or laid in floors including brass elbow and Brass 'T' with accessories suitable for CPVC pipes and including taking down as per existing complete all as specified and as directed. |
| 56 | Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in walls and ceiling or laid in floors including brass elbow and Brass 'T' with accessories suitable for CPVC pipes and including taking down as per existing complete all as specified and as directed. |
| 57 | Taking down at any description at any position for cement plaster on brick or PCC block or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed. |
| 58 | M&L for rendering 10mm thick in Cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 59 | M&L for preparing plastered surfaces of walls and applying two coats of distemper oil emulsion on walls over a coat of primer complete all as specified and as directed. |
| 60 | M&L for Preparing plastered or unplastered old decorated surfaces of walls and applying one coat of distemper oil emulsion on walls complete all as specified and as directed. |
| 61 | M&L for Preparing plastered or unplastered old decorated surfaces of ceiling and applying one coat of distemper oil emulsion on Ceiling complete all as specified and as directed. |
| 62 | Taking down at any description and at any position for carefully copper/aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling rose, pendants, regulators socket etc to be measured separately) removing material and credit of schedule and making good disturbed surface of wall, floor etc. and credit of schedule complete all as specified and as directed. |
| 63 | M&L for point wiring with 1.5 sqmm (nominal area) single core PVC insulated unsheathed FRLS cable, multistranded, copper conductor, in universal color code with & including suitable size of rigid concealed in PVC Conduit and its all accessories complete in wall/roof and including with modular metal box with sheet suitable for mounting switches, socket, regulator etc and including earth wire of PVC insulated FRLS copper conductor multistranded of 1.5 Sqmm size in green color for one light/fan/bell point controlled by one switch complete all as specified and as directed. |
| 64 | All as per item No.63 but one 3 pin 5/6 Amps socket point controlled by one switch on independent board. |
| 65 | All as per item No.63 but one 3 pin 5/6 Amps socket point controlled by one switch on Same board. |
| 66 | Ditto all as per item no 63 above but with 2.5 sqmm (nominal area) Ditto |
| 67 | Ditto all as per item no 63 above but with 4.0 sqmm (nominal area) Ditto |
| 68 | S&F for switch modular type, single pole one module 6 Amps 230 volts complete all as specified and as directed. |
| 69 | S&F for socket modular type, single pole two module 2-in-1, 5 pin, 6 Amps 230 Volt complete all as specified and as directed. |
| 70 | S&F for switch modular type, single pole one module 16 Amps 230 volts complete all as specified and as directed. |
| 71 | S&F for socket modular type, 2-in-1, 5 pin, 6/16 Amps 2 module 230 volts complete all as specified and as directed. |
| 72 | S&F for ceiling rose, bakelite, surface type 230/240 volts three terminal PVC/polycarbonate, isolated body complete all as specified and as directed. |
| 73 | Supply and fix Exhaust fan, steel body AC single phase, 230V of size 300mm sweep with blades, and frame and louvers including taking down removing Exhaust fan deposit to MES store complete all as specified and directed. |
| 74 | S&F for LED light fitting 4 feet, 1X20 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 75 | Ditto all as per item no 74 above but LED light fitting 2 feet Ditto |
| 76 | S&F for LED light fitting, mirror type with high output diffuser 2 feet, 1X10 Watts, 220 volts, AC decorative type with driver, holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 77 | S&F for modular surface box 4 module with MCB SP 25 Amps in plastic enclosure & unbreakable heavy duty ISI plug top all as specified and as directed. |
| 78 | S&F for MCB SP 6 to 32 amp rating 240V, 10KA, miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection and commissioning complete all as specified and as directed. |
| 79 | Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out soft / loose soil complete all as specified and as directed. |
| 80 | Rolling and consolidating formation surfaces in cutting including watering as necessary, filling in the depressions with approved earth which occur during the process, with 8 to 12 tonne power roller, consolidating to required gradient and camber complete all as specified and as directed. |
| 81 | M&L for Soling (or sub base) 200mm thick (spread thickness), in two layers of 100mm thickness each, with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated with 8 to 10 tonne power roller to required gradient and camber complete all as specified and as directed. |
| 82 | M&L for 150mm thick WMM in two layer of 75mm (compacted thickness), with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and as directed. |
| 83 | Preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed. |
| 84 | M&L for 100mm thick cement concrete (1:2:4) type-B2 (using 40 mm graded stone aggregate) as Sub base of flooring including finishing concrete roads, pavements by brooming complete all as specified and as directed. |
| 85 | Use and Waste for Forming 20mm thick expansion joints for full depth filled with perforated bituminous filler and top 30mm primed and sealed with sealing compound grade A complete all as specified and as directed. |
| 86 | Use and Waste for Forming construction (Dummy) joints 65mm deep x 10mm wide filled with perforated bituminous filler and top 30mm primed and sealed with sealing compound grade A complete all as specified and as directed. |
| 87 | M&L for Road Marking Strips, Lines, Dashes, Arrows, Letters etc of 2.5mm thick [Reflective Type] of colour white or Golden Yellow on roads, pavements and the like exceeding 10 cm wide complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender