Tender For Special Repairs To Lt/ Ug Cables At Caw And Bolton Road At Caw (Tender Id No. 2026_Mes_790760_1)
Tender Value
24 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
14 days left
EMD
48000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Lt/ Ug Cables At Caw And Bolton Road At Caw (Tender Id No. 2026_Mes_790760_1)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5 m in wide and not exceeding 1.5m in depth for laying of cables / GI pipe and getting out in the Hard/Dense soil of soil complete all as specified and as directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms complete all as specified and as directed. |
| 3 | Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and as directed. |
| 4 | Supply and spreading clean, fine, dry river sand in trenches for cushioning of under ground cable / inside substn yard complete all as specified and directed by Engineer-in-Charge. |
| 5 | Supply and lay Ditto, but Class LV, Type I, flat, size 250 mm x 150mm x 40mm laid in trenches as protection to cables complete all as specified and as directed. |
| 6 | M & L for Road cutting / hard standing for laying of LT UG cable upto a depth of 15 cm, and repair the excavated portion of road as existing or by providing suitable mixture of PCC all as specified and as directed. |
| 7 | Taking down unsv GI tubing and M&L for new galvanized steel tubing, light grade, with all fittings for protection of cable complete all as specified for the following sizes :- |
| 8 | (a) 50mm bore |
| 9 | (b) 40 mm bore |
| 10 | Taking down UNSV LT UG cables of following sizes (Note :- Earth work Excavation measured and paid seperately). |
| 11 | (a) From 10Sqmm, 2 Core upto and incl 70 Sqmm 3.5 Core |
| 12 | (b) From 95 Sqmm, 3.5 Core upto and incl 300 Sqmm |
| 13 | Supply &Laying LT UG Cables , XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volts grade, of following cross-sectional area complete all as specified and as directed. |
| 14 | 10Sqmm, 4 Core |
| 15 | 16 Sqmm 4 Core |
| 16 | 25Sqmm, 4 Core |
| 17 | 35Sqmm, 3.5 Core |
| 18 | 50 Sqmm, 3.5 Core |
| 19 | 70 Sqmm, 3.5 Core |
| 20 | 95 Sqmm, 3.5 Core |
| 21 | 300 Sqmm, 3.5 core |
| 22 | Cable route indicators made out of PCC fixed vertically in gound alongwith span of line with mentioning letters indicating type of cable grade on exposed portion including excavation and refilling etc all as specified |
| 23 | Repairs and Maint of LT Feeder pillar Boxes , replacing the unserviceable door hinges, locks , cutting the burnt portion of cable / lugs and crimping with new lugs of suitable size and connecting . Painting the Feeder Pillar Box with approved colour |
| 24 | Taking down old unsv MCCBs and S&F MCCBs, 4 pole, 415 volts, Adj thermal and Adj magnetic type of capacity 250 Amps with breaking capacity of 36KA ICS=100% ICU complete all as specified and as directed including modification to the panel as required. |
| 25 | Taking down old unsv MCCBs and S&F MCCBs, 4 pole, 415 volts, Adj thermal and Adj magnetic type of capacity 160 Amps with breaking capacity of 25KA ICS=100% ICU complete all as specified and as directed including modification to the panel as required. |
| 26 | Taking down old unsv MCCBs and S&F MCCBs, 4 pole, 415 volts of capacity 40 Amps to 100 Amps with breaking capacity of 25 KA Adj thermal and Adj magnetic ICS=100% ICU complete all as specified and as directed including modification to the panel as required. |
| 27 | Supply, install test and commission LT Panel board, TPN 415 Volts, 50 Hz, 300 Amps capacity aluminium busbar 04 Nos, out door cubical type floor mounted, factory made fabricated from CPRI validated certifyed panel manufacturers, totally enclosed, double door at front & rear side inclusive of necessary locking arrangement, dust and vermin proof, suitable opening for vent and cable entry,fabricated out of CRCA sheet 3mm thick duly powder coated fixed on angle iron pedestal of size 50x50x3 mm thick with cable chamber for incoming and outgoing connections with suitable glands and lugs comprising for the following accessories including necessary PCC foundation and grouted with suitable nut, bolts, washers etc to the MC pedestal and connecting all incoming and out going cables all as specified and directed :- (Loc: MES IB)(a) INCOMING:- (i) MCCB 4 Pole, 160 Amps, Adj thermal and Adj magnetic ICS=100% ICU breaking capacity of 36 KA (ATFM) , - 1 No(b) OUTGOINGS:-(i) MCCB, 3 pole 63 Amps, breaking capacity of 16 KA, - 6 No(ii) MCB SPN 32 Amps - 01 No(iv) spare for MCCB - 01 No(c) Aluminium busbar for phase and neutral duly insulated with PVC sleeves RYB, mounted on heavy duty epoxy insulators in separate compartment - 01 Set(d) Digital dispaly VAF panel meter - 1 Nos(e) LED type Indication lamp 240 Volts Set of three - 1 Set |
| 28 | Supply, install test and commission LT Panel board, TPN 415 Volts, 50 Hz, 300 Amps capacity aluminium busbar 04 Nos, out door cubical type floor mounted,CPRI approved, factory made,totally enclosed, double door at front & rear side inclusive of necessary locking arrangement, dust and vermin proof, suitable opening for vent and cable entry,fabricated out of CRCA sheet 3mm thick duly powder coated fixed on angle iron pedestal of size 50x50x3 mm thick with cable chamber for incoming and outgoing connections with suitable glands and lugs comprising for the following accessories including necessary PCC foundation and grouted with suitable nut, bolts, washers etc to the MC pedestal and connecting all incoming and out going cables all as specified and directed :- (Loc: P-1 at BR)(a) INCOMING:- (i) MCCB 4 Pole, 160 Amps, breaking capacity of 36 KA (ATFM) , - 1 No(b) OUTGOINGS:-(i) MCCB, 3 pole 100 Amps, breaking capacity of 16 KA, - 3 No(ii) MCCB, 3 pole 63 Amps, breaking capacity of 16 KA, - 2 No(iii) MCB SPN 32 Amps - 01 No(c) Aluminium busbar for phase and neutral duly insulated with PVC sleeves RYB, mounted on heavy duty epoxy insulators in separate compartment - 01 Set(d) Digital dispaly VAF panel meter - 1 Nos(e) LED type Indication lamp 240 Volts Set of three - 1 Set |
| 29 | Supply, install test and commission LT Panel board, TPN 415 Volts, 50 Hz, 300 Amps capacity aluminium busbar 04 Nos, out door cubical type floor mounted,CPRI approved, factory made,totally enclosed, double door at front & rear side inclusive of necessary locking arrangement, dust and vermin proof, suitable opening for vent and cable entry,fabricated out of CRCA sheet 3mm thick duly powder coated fixed on angle iron pedestal of size 50x50x3 mm thick with cable chamber for incoming and outgoing connections with suitable glands and lugs comprising for the following accessories including necessary PCC foundation and grouted with suitable nut, bolts, washers etc to the MC pedestal and connecting all incoming and out going cables all as specified and directed :- (Loc: Near BR Transformer)(a) INCOMING:- (i) MCCB 4 Pole, 400 Amps, breaking capacity of 36 KA (ATFM) , - 1 No(b) OUTGOINGS:-(i) MCCB, 4 pole 250 Amps, breaking capacity of 27 KA, - 2 No(ii) MCCB, 4 pole 200 Amps, breaking capacity of 27 KA, - 1 No(iii) MCCB, 4 pole 160 Amps, breaking capacity of 25 KA, - 2 No(iv) MCCB, 3 pole 100 Amps, breaking capacity of 16 KA, - 1 No(v) MCCB, 3 pole 63 Amps, breaking capacity of 16 KA, - 2 No(vi) Spare for MCCB - 01 No(Vi) MCB SPN 32 Amps - 01 No(c) Aluminium busbar for phase and neutral duly insulated with PVC sleeves RYB, mounted on heavy duty epoxy insulators in separate compartment - 01 Set(d) Digital dispaly VAF panel meter - 1 Nos(e) LED type Indication lamp 240 Volts Set of three - 1 Set Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender