Tender For E8 Tender Id-2026_Mes_Name Of Work: Provision Of Covered Drainage And Interlocking Path Near Building No P-133 (Sangam) And Covered Sentry Shed At Ramanthali Gate At Ina Ezhimala
Tender Value
37.43 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
14 days left
EMD
75000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kannur → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for E8 Tender Id-2026_Mes_Name Of Work: Provision Of Covered Drainage And Interlocking Path Near Building No P-133 (Sangam) And Covered Sentry Shed At Ramanthali Gate At Ina Ezhimala
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth for foundation etc or for shaft, wells, manholes, pier holes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed. |
| 2 | Material and labour for PCC (1:4:8) Type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified and as directed. |
| 3 | Material and labour for pre cast cement concrete block masonry Type C1 (1:3:6) (20 mm graded agrregate) solid blocks exc 10cm in width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar (1:6) complete all as specified and as directed. |
| 4 | Returning, filling in, including spreading levelling and well ramming of soil in layers not exc 25 cm in hard soil all as specified and as directed. |
| 5 | Removing excavated material (soils) not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point,all as specified and as directed. |
| 6 | Material and labour for Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in coping and edging of paver blocks and like including weathering slightly rounded or chamfered angles and throating and including necessary use and waste of form work.,all as specified and as directed. |
| 7 | Material and labour for Cement Concrete 1:2:4 type B1 (20mm graded stone aggregate) as in surface channel and drain complete all as specified and as directed. |
| 8 | Material & labour for rendering 15 mm thick on fair face of brick work or concrete surface in CM 1:6 for wall finished even & smooth without using extra cement all as specified and as directed. |
| 9 | Extra for forming fair finished drain or channel 45cm inner girth on cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and as directed. |
| 10 | Material and labour for precast reinforced concrete Type B-1 1:2:4 (20mm graded aggregate) set in cement mortar 1:6 as in cover slabs,all as specified and as directed. |
| 11 | Material and labour for TMT bars 6mm to 8 mm dia cut to length bent to shape required including cranking bending and binding with MS wire not less than 0.90mm dia,all as specified and as directed. |
| 12 | Material and labour for TMT bars 10mm dia and over cut to length bent to shape required including cranking bending and binding with MS wire not less than 0.90mm dia,all as specified and as directed. |
| 13 | Surface excavation n exc 30cm deep and avg 15cm deep and getting out in hard/dense soil,all as specified and as directed. |
| 14 | Material and labour for preperation newly plastered surfaces of wall and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior weather proof paint of required shed (company Depot tinted) with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm on walls, pillasters, cornices, drops, chajjas etc., complete all as specified and as directed. |
| 15 | Material and labour broken stone or boulder hardcore of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface all as specified and as directed. |
| 16 | Material and labour for 100mm thick PCC 1: 4:8 Type D2 using 40mm graded stone aggregate as in sub base of flooring,all as specified and as directed. |
| 17 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drives ways or light traffic parking etc., of required strength thickness and size/shape, made by table vibratory method using over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of interlocking paver blocks in to the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 18 | Material and labour for machine cut mirror polishing kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beeswax polish over and including 20mm screed bed in cement mortar (1:4), all as specified and as directed. |
| 19 | Material and labour for Excavation over areas n exc 1.5m deep and getting out in hard/dense soil,all as specified and as directed. |
| 20 | Material and labour for 75 mm moorum/red bajri, (using earth obtained from Excavation) spread, rolled & consolidated to graident and camber required in berms all as specified and as directed. |
| 21 | Material and labour Precast cement concrete designer tiles, bullnosed, rubber moulded, 25 mm thick set, jointed and pointed in neat cement slurry with white cement & pigment to match the colour of tiles all as specified and as directed. |
| 22 | Material and labour 15 mm thick cement mortar screed bed in CM (1:6) all as specified and as directed. |
| 23 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified and as directed. |
| 24 | Material and labour for cement concrete Type B2, 1:2:4 (40mm graded aggregates) in foundation filling and mass concrete complete all as specified and as directed.. |
| 25 | Material and labour for steel work in tubular trusses, posts including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st - 240 complete all as specified and as directed. |
| 26 | Material and labour for MS plates (plain or chequred) channel, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 W (Gde-E-250) Quality - B including fixing with riveting, bolting or welding all as specified and as directed. |
| 27 | Supply & fix rolled mild steel as in main and cross beam, hip and jack rafters, purlins where connected to common rafters fixed with angle cleats of Fe 410-W (Gde E-250) quality-B all as specified and as directed. |
| 28 | Material and labour for Mild steel work for wind ties for roof including securing bolts including all necessary drilling, bolting or riveting etc., and similar work conforming to Fe-290 Gde E-165 etc., complete all as specified and as directed. |
| 29 | Supply & fix pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and as directed. (Note :- The length of self tapping screw may vary for wooden and steel truss. Contractor to quote rate accordingly.) |
| 30 | Material and labour for painting steel and iron work of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide (Zinc chrome) primer,all as specified and as directed. |
| 31 | Material and labour 3mm thick ACP Cladding in wall / faces of cloumn laid over frame work complete all as specified and as directed. |
| 32 | Surface excavation n exc 30cm deep and avg 27cm deep and getting out in hard/dense soil,all as specified and as directed. |
| 33 | Material and labour for 100mm thick PCC 1: 4:8 Type D2 using 40mm graded stone aggregate as in sub base of flooring,all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender