Tender For Cutting Of Grass, Pruning Of Trees, Shrub, Bushes Upto Boundary Including Clearing The Dry Grass Outside Md Land And Filling Of Earth In Both Side Of Low Lying Area Of Runway At Shibpur Under (S) Diglipur.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
5 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
North and Middle Andaman → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Cutting Of Grass, Pruning Of Trees, Shrub, Bushes Upto Boundary Including Clearing The Dry Grass Outside Md Land And Filling Of Earth In Both Side Of Low Lying Area Of Runway At Shibpur Under (S) Diglipur.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Oct-2026 | Corri No 01 | Date | 06-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for periodic cutting of Grass, Bushes,Small Plants using Hand held Grass cutting Machine of reputed Make with One Machine operator and one helper for Cutting and sweeeping Grass after cutting of Grass, Bushes,Small Plants of any type along the sides of Dispersal Area, Taxi Track,Runway,shoulders and Airfield areas throughout the year,including supply of Fuel,lubricants,spares,renewal of blades as required including maintenance and repairs to Machine and trade insurance and license fees including removing of debris to a distance exceeding 250m but not exceeding 500m from the site complete all as specified and as directed. |
| 2 | Note for Serial item No 1: The rate quoted shall be deemed to be considering following provisions and nothing shall be paid extra on this account.(a) Area of Grass cutting ahall be as decided by the Engineer-in-Charge and representative of users as and when required basis(b) Periodicity of grass cutting,will be as directed by the Engineer-in-Charge in consultation with users.For this purpose, the tendered shall maintain a register indicating the details (c) At least One No. of Hand held Grass cutting Machine shall be made available at all times at site and the same may be increased to required numbers as per site requirement.(d) MInimum numbers of Labour and grass cutting machines required shall be decided by the Engineeer-in-charge in consultation with users depending upon the required area of grass cutting. In case of any dispute , decision of GE shall be final and binding.(e) The grass shall be cut so that the protruding grass shall not be more than 15mm above ground level and disposal as directed.(f) The work is required to be executed in highly restricted area along Main Runway. Therefore , the work shall be executed during non-flying hours either during Day or Night without causing any disturbance for flying . proper safety arrangement,equipment shall be provided by the contractor for workmen. Please Enable Macros to View BoQ information |
| 3 | Note for Serial item No 1: The rate quoted shall be deemed to be considering following provisions and nothing shall be paid extra on this account.(a) Area of Grass cutting ahall be as decided by the Engineer-in-Charge and representative of users as and when required basis(b) Periodicity of grass cutting,will be as directed by the Engineer-in-Charge in consultation with users.For this purpose, the tendered shall maintain a register indicating the details (c) At least One No. of Hand held Grass cutting Machine shall be made available at all times at site and the same may be increased to required numbers as per site requirement.(d) MInimum numbers of Labour and grass cutting machines required shall be decided by the Engineeer-in-charge in consultation with users depending upon the required area of grass cutting. In case of any dispute , decision of GE shall be final and binding.(e) The grass shall be cut so that the protruding grass shall not be more than 15mm above ground level and disposal as directed.(f) The work is required to be executed in highly restricted area along Main Runway. Therefore , the work shall be executed during non-flying hours either during Day or Night without causing any disturbance for flying . proper safety arrangement,equipment shall be provided by the contractor for workmen. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 06, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender