Tender For Repair To Flooring, Joinery, Roof Sheets, False Ceiling Including Connected B/R Including Connected Internal Works To Certain Otm And Md Accn At Mil Station Dagshai Under Ge Kasauli
Tender Value
35 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
17 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Flooring, Joinery, Roof Sheets, False Ceiling Including Connected B/R Including Connected Internal Works To Certain Otm And Md Accn At Mil Station Dagshai Under Ge Kasauli
BOQ
| Sl. No. | Item Description |
| 1 | SCH 'A' |
| 2 | Supply and fixing 0.60mm thick Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in any position or slope upto 12 mtr of height including Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern as in roof coverings complete all as specified and as directed. complete all as specified and directed.Note- The sheets shall have (150 gm/Square metre total on both sides) with super durable polyester quality paint of approved colour, suitable for exterior application conforming to IS-15965. |
| 3 | Supply and fixing 0.60mm thick Pre-painted galvalume aluminium zinc coating GI based plain steel sheet of approved colour having tensile strength of 550 Mpa as in ridges, valley gutters etc ,fixed with self tapping screws in any position or slope upto 12 mtr of height including dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern as in roof coverings complete all as specified and as directed. complete all as specified and directed.Note- The sheets shall have (150 gm/Square metre total on both sides) with super durable polyester quality paint of approved colour, suitable for exterior application conforming to IS-15965. |
| 4 | Supply and fixing0.63mm thick Galvanised corrugated mild steel sheeting with two corrugations side lap as in roof covering/cladding to wall, fixed with coach screws and washers or with self tapping screws in any position or slope upto 12mtr height as in patches including dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar patter as in roof coverings complete all as specified and directed. |
| 5 | Material and labour for cement concrete 1:2:4 type B1 (using 20mm graded aggregate) as in copings to retaining walls, walls before fixing of roof sheets, roof kerbs or mud stops, rounded or chamfered on edges, cills, steps, fixing MS hold fast, filing gaps/spaces between wooden/ mild steel member embedded in stone / brick masonry wall etc including use and waste of form work in any position or slope upto 12mtr height complete all as specified and directed. |
| 6 | Supply and fixing 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap as in roof covering/ cladding to wall, fixed with coach screw and washers or with self tapping screws in any position or slope upto 12mtr height as in patches including dismantling plain or corrugated fibre sheeting, any gauge, thickness complete all as specified and directed. |
| 7 | Supply and fixing 2mm thick plain/textured flexible crystal clear/frosted polycarbonate plain sheets, including cutting to required shape and size as in openings of terraces, balconies, verandahs, windows and similar work fixed on timber frame or MS frames with self driving screws etc including dismantling of old plain or corrugated fibre, polycarbonate sheeting any gauge, thickness etc complete all as specified and directed |
| 8 | Taking down eaves gutters, rain water pipes (any size or pattern) including flashing (wooden or mild steel sheeting, all fitting heads shoes bends swan necks etc, measured overall as fixed along the centre line over fitting and accessories complete all as specifed and directed. |
| 9 | Supply and fixing plain mild steel sheeting 0.80mm thick as in rain water gutters, drip and straight flashings (length and girth as fixed ), ridges, hips, and similar work etc fixed as welded or soldered joints, reveting are provided etc in any position or slope upto 12mtr height incuding painting two coats of synthetic enamel paint over a coat of primer after fixing complete all as specified and directed.Note : Rates are included for providing nozzles, stop ends, drop ends made of mild steel sheeting 0.80mm thick with necessary fixing arrangement/ jointing with rubber/silicon sealant for PVC downwater pipes and supplying and fixing of 15mm thick 2nd class hard wood planks for support to MS flashings (length and width as per MS flashing) fixed with nails or self tapping screws to MS or wooden members. |
| 10 | Supply and fixing 160mm dia PVC (SWR) Pipes for rain water gutters, single or double socketed, in any length with rubber ring joints fixed to stone/ brick walls with heavy duty MS clamps, nuts & bolts etc complete all as specified and as directed. |
| 11 | Supply and fixing 160mm dia PVC (SWR ) bends for rain water gutters (with or without door), elbow etc with rubber ring joints fixed to walls complete all as specified and as directed. |
| 12 | Material and labour for mild steel works for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, hook and pintle hinges, clamps, hold fasts, wall ties, wind ties, plain angle cleats for securing purlins to wood trusses or rafters knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 at any position or slope upto 12mtr height incuding painting two coats of synthetic enamel paint over a coat of primer after fixing complete all as specified and directed. |
| 13 | Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal/ square nut or Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised of any size and length as per site requirment etc complete all as specified and directed. |
| 14 | Material and labour for 6 mm thick plywood, 5 No of ply, grade BWR, type BB fixed with screws over timber frame work including painting with two coats of synthetic enamel paint over a coat of primer on one side after fixing complete including dismantling of old false ceiling other than AC board any description any type fixed in any position with nails or screws etc including fillets complete all as specified and directed. |
| 15 | Material and labour for 2nd class hard wood plain fillets sectional area exc 13 & n.exc 25 sq.cm, square, rectangular or triangular in section, clean sawn, fixed straight or curved, secured with nails or brads etc including Dismantling timber scantling 40 sq.cm and under in section in any position in framed work as in fillets, rails, posts, rafters, purlins, etc. complete all as specified and as directed.complete all as specified and as directed. |
| 16 | Material and labour for 2nd class hard wood plain fillets sectional area exc 06 & n.exc 13 sq.cm, square, rectangular or triangular in section, clean sawn, fixed straight or curved, secured with nails or brads etc including Dismantling timber scantling 40 sq.cm and under in section in any position in framed work as in fillets, rails, posts, rafters, purlins, etc. complete all as specified and as directed. complete all as specified and as directed. |
| 17 | Supply and fixing for 2nd class hard wood over 40 sqcm as in roof trusses, members, scantling etc clean sawn timber framed and fixed in any position upto 10mtr height including dismantling timber scantling 40 sq.cm and over in section in any position in framed or unframed work etc complete all as specified and as directed.complete all as specified and as directed. |
| 18 | Supply and fixing GI Clip in Metal Ceiling plain Globel white colour tiles of size 600 x 600 mm, 0.5 mm thick with 25 mm height, made of GI sheet having galvanizing of 100 gsm/Square metre (both side inclusive) , factory painted, 20 % perforation area with 1.8mm dia holes and having NRC of 0.5 module, which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm centre to centre, suspending the main C carrier of size 10x38x10mm made of GI steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6mm, rawl plugs of size 38x12 mm and C carrier suspension clip and mair carrier bracket at 1000 mm c/c. Inverted triangle shaped spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centres with help of suspension brackets. Wherever the main C carrier and T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/Square metre (both side inclusive), fixing with clip in into spring T , The grid is suspended from the roof with min 6mm GI rods for quick adjustment at max 5000mm length or as per manufacturer instructions etc including dismantling of old metal false ceiling of any description any thickness complete all as specifie and directedNote : Work shall be done by authorised applicator of the manufacturer. |
| 19 | Supply and fixing in repairs PVC sheets 1.50 mm thick laminated homogeneous, coloured, marbled mosaic or mottled finish, laid with approved rubber based /synthetic adhesive or as per manufacturer's instructions etc complete all as specified and as directed. |
| 20 | Supply and fixing in repairs 40mm thick 2nd class hardwood planks as in floors, planed one side, with butt joints and fixed with screws etc to existing floors in patches, including cutting out, piecing, heading joints etc complete all as specified and as directed. |
| 21 | Dismantling posts or struts (Wood, steel or RCC) any section including taking out embedded portion in concrete, brick work, masonary etc, and making good disturbed ground complete all as specified and directed |
| 22 | Dismantling wrought iron or mild steel work of any description any position not otherwise provided complete all as specified |
| 23 | Supply and fixing for mild steel section framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, window guard bars, plain, let in and fixed independently in wooden frames including MS screws, L or T section supports for shelves, sinks etc and similar work conforming to Fe.290.Gde-E-165 complete incuding painting two coats of synthetic enamel paint over a coat of primer after fixing complete all as specified and directed. |
| 24 | Supply and fixing Hard drawn steel wire fabric weight n.exc 4 kg/Square metre cut to lengths, bent to shape required and fixed/shouldered on wooden/MS frame work etc incuding painting two coats of synthetic enamel paint over a coat of primer after fixing complete all as specified and directed. |
| 25 | Material and labour for non skid ceramic joint less coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.18 Square metre but n exc 0.38 Square metre in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles laid over 15mm thick screed bed in cement mortar 1:6 including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing debris/ rubbish etc out of MoD land complete all as specified and as directed.complete all as specified and as directed. |
| 26 | Material and labour for 8-9 mm thick Vitrified ceramic tiles light shade (square/ rectangular) polished, area of each tile not exceeding 0.36 Square metre in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over 15 mm thick screed bed 1:6 including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing debris/ rubbish etc out of MoD land complete all as specified and as directed. complete all as specified and as directed. |
| 27 | Material and labour for 8-9 mm thick Vitrified ceramic tiles light shade (square/ rectangular) polished, area of each tile not exceeding 0.36 Square metre as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over 15 mm thick screed bed 1:6 including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing debris/ rubbish etc out of MoD land complete all as specified and as directed. complete all as specified and as directed. |
| 28 | Taking down chowkhats or frames with shutters(without taking off shutters from the frames) of any description n.exe 1.5 Square metre each including iron mongries complete all as specified and as directed. |
| 29 | Taking down chowkhats or frames with shutters(without taking off shutters from the frames) of any description exe 1.5 Square metre but n exc 4 Square metre each including iron mongries complete all as specified and as directed. |
| 30 | Taking down shutter of any description exc 1 Square metre and n exc 2 Square metre each including iron mongries complete all as specified and directed |
| 31 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and directed.(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 32 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directedNote : Rates are included for M.S. hold fast/ lugs or SS dash fasteners. |
| 33 | Supply and fixing 35mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated including two coats of synthetic enamel paint over a coat of primer after fixing complete all as specified and directed. |
| 34 | Supply and fixing 35 mm thick factory made 2nd class hard wood partly or fully glazed and skelton shutter (Single or double leaf) open rebated and prepared to receive glass ,gauge etc divided into squares with plain, chamfered or rounded, mitred beads, rebated sash bars any numbers for securing glass, etc or partly with panels of 9mm BWP commercial ply etc with size of members of shutters as specified in SSR Part-I, section 8 clause 8.24(a) including painting two coats of synthetic enamel paint over a coat of primer after fixing to chowkats etc complete all as specified and as directed. |
| 35 | Supply and fixing mild steel Framed work as in doors or gates of angle, steel sheeting or other section with gusset plates, rails, braces, etc.by shouldering, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (inclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc conforming to Fe 410-W (Gde E -250) Quality A including painting two coats of synthetic enamel paint over a coat of primer after fixing complete all as specified and directed. |
| 36 | Supply and fixing Pressed steel frames for doors of size 125 x 60mm as per site requirement with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including painting two coats of synthetic enamel paint over a coat of priming complete as specified and directed. |
| 37 | Material and labour 2nd class hardwood as in plain, solid straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints including painting two coats of synthetic enamel paint over a coat of primer after fixing complete all as specified and as directedNote : Rates are included for M.S. hold fast/ lugs or SS dash fasteners. |
| 38 | Supply and fixing aluminium power coating of approved colour (Thickness or powder coating not less than 50 micron) frame for doors, windows, ventilators, partitions incl necessary joining cleats, rubber packing, snap beading, glazing clips for fixing glass etc with one or more rebates or double/ triple track channels for sliding shutter windows including joining cleat and steel screw for fixing frame to walls/jambs etc. complete all as specified and directed. |
| 39 | Supply and fixing aluminium power coating of approved colour (Thickness or powder coating not less than 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21,100mm long (2 no.) suitable handle (1 no.) etc or sliding shutters with all necessary fittings such as roller, rubber beading locking arrangement clit etc. complete all as specified and directed (Glass or wiremesh shall be paid separately) |
| 40 | Supply and fixing aluminium power coating of approved colour (Thickness or powder coating not less than 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws etc. complete all as specified |
| 41 | S &F powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. |
| 42 | Supply and fixing aluminium power coated (Thickness or powder coating not less than 50 micron of approved colour) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, aluminum snap beading screws etc. complete all as specified and directed. |
| 43 | Supply and fixing 9mm thick pre-laminated particle board exterior grade, both side laminations of approved colour and pattern fixed to wooden / aluminium frame work as in partitions, doors etc including necssary fittings etc complete all as specified and as directed. |
| 44 | Supply and fixing in repairs fancy type decorated stainless steel curtain hanging rails/rods of 25mm dia inlcuding adjustable SS brackets and SS decorative end caps or finials for each window and door etc complete all as specified and directed |
| 45 | Supply and fixing stainless steel 100 mm long butt hinges medium weight and fixed with stainless steel screws complete all as specified and directed. |
| 46 | Supply and fixing stainless steel 200mm long barrel tower bolt and fixed with stainless steel screws complete all as specified and as directed. |
| 47 | Supply and fixing stainless steel 150mm long barrel tower bolt and fixed with stainless steel screws complete all as specified and as directed. |
| 48 | Supply and fixing stainless steel 150mm long handles'D' type (Heavy duty) glossy finish and fixed with stainless steel screws complete all as specified and as directed. |
| 49 | Supply and fixing stainless steel 200mm long sliding door bolts, plate type, with bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed |
| 50 | Supply and fixing stainless steel 300mm long sliding door bolts, plate type, with bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed |
| 51 | Supply and fixing in repairs stainless steel 200mm long barrel tower bolt and fixed with stainless steel screws complete all as specified and as directed. |
| 52 | Supply and fixing in repairs stainless steel 150mm long handles'D' type (Heavy duty) glossy finish and fixed with stainless steel screws complete all as specified and as directed. |
| 53 | Supply and fixing in repairs stainless steel 300mm long sliding door bolts, plate type, with bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed |
| 54 | Supply and fixing for floor door stopper of aluminium alloy body and tongue , anodised with hard drawn steel spring over all length of cover plate 150mm complete all as specified and directed. |
| 55 | Supply and fixing in repairs mild steel 375mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 56 | Supply and fixing 4.80 mm thick Sheet glass, ordinary quality and glazing with oil putty or fixing in aluminium shutters/frames in any shape and size complete all as specified and as directed. |
| 57 | Supply and fixing 4.80 mm thick obscured or frosted glass, ordinary quality and glazing with oil putty or fixing in aluminium shutters/frames in any shape and size complete all as specified and as directed. |
| 58 | Supply and fixing 4.80 mm thick Sheet glass, ordinary quality and glazing with oil putty, fixing in aluminium shutters/frames or with 2nd class hardwood fillets/ Beads, straight (any size) for glazed joinery in any shape and size including hacking out old broken glass (any thickness, size, quality or description) complete all as specified and as directed. |
| 59 | Supply and fixing 4.80 mm thick obscured or frosted glass, ordinary quality and glazing with oil putty, fixing in aluminium shutters/frames or with 2nd class hardwood fillets/ Beads, straight (any size) for glazed joinery in any shape and size including hacking out old broken glass (any thickness, size, quality or description) complete all as specified and as directed. |
| 60 | Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or nails including 2nd class hardwood fillets/ Beads, straight (any size) for gauzed joinery complete all as specified and directed. |
| 61 | Supply and fixing in repairs for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or nails including 2nd class hardwood fillets/ Beads, straight (any size) for gauzed joinery, renewed, including mitres including fixing with nails etc and removing old beads complete all as specified and directed. |
| 62 | Demolition of cement concrete (unreinforced) as in roofs, floors (other than ground floors) at any position upto 15mtr height complete and removing debris/ rubbish etc out of MoD land complete all as specified and as directed. |
| 63 | Material and labour for 25mm thick cement concrete type B-0. 1:2:4 (12.5mm graded aggregate) as in sub base/levelling course on roof surfaces at any position upto 15mtr height complete all as specified and directed. Please Enable Macros to View BoQ information |
| 64 | Material and labour for 25mm thick cement concrete type B-0. 1:2:4 (12.5mm graded aggregate) as in sub base/levelling course on roof surfaces at any position upto 15mtr height complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender