Tender For Repair/Maintenance Of Flooring, Dado, Wall/Ceiling Plastering Including Of Area D, E & Das At Naval Dockyard Visakhapatnam Under Ge(I) Dm Visakhapatnam
Tender Value
85 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
13 days left
EMD
1.52 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance Of Flooring, Dado, Wall/Ceiling Plastering Including Of Area D, E & Das At Naval Dockyard Visakhapatnam Under Ge(I) Dm Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises and removing debris out side Dockyard all as specified and directed. |
| 2 | M&L for coloured non skid ceramic tiles area of each tiles exceeding 0.06 but not exceeding 0.11 sqm, in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including cement screed 15 mm thick in 1:6 complete all as specified and directed. |
| 3 | M&L for coloured glazed ceramic tiles (300 x 450) x 7-8 mm thick in dado set and jointed in neat cement slurry and pointed in coloured cement to match fixed over incl rendering in CM 1:4, 10 mm thick complete all as specified and directed. |
| 4 | M&L for light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick 1:6 cement morter including roughning surface of old concrete floor by picking sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed. |
| 5 | M&L for light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick 1:6 cement morter including roughning surface of old concrete floor by picking sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed. |
| 6 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 7 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed |
| 8 | M&L for rounding to edges of granite stone slabs one edge such as in steps, cooking plateform or any location etc., complete all as specified and as directed. |
| 9 | Material & labour for chipping (30mm to 75mm) of existing damaged, crakced, spalled & loose portion of concrete of the RCC members completely till the reinforcement is exposed and sound concrete is observed by using mechanical means and manual chisels and further the surface is cleaned with water jet, again clean the surface with blower to remove all loose fine particles present in the surfaces and for removal of dust and loose particles including hoisting assembling and fixing of double layer steel scaffolding complete all as specified and as directed. Note:- (a) Removing rubbish off the premises and disposting at outside ND land no seprate paid. (b) Work shall be carried out at any location or height i.e. Hills etc cost of the work deemed to be included in items. |
| 10 | M&L for preparation of exposed surafaces of rusted steel reinforcement with metal wire brush , cleaning the rusted surfaces free from loose rust and application of rust remover cum passivator painted with brush to the rusted reinforcement , and removing rust with flex after 24 hours of application of rust remover with the help of wire brush, sand paper and thoroughly washed with water with the help of pressure jet and allowing it to dry complete all as specified and directed.( Length of cleaned reinforcement steel bar shall be measured for payment.) |
| 11 | M&L for preparation of surfaces of steel of reinforcement by cleaning thruoghly and providing, mixing and applying zinc anti-rust agent as per manufacturers method of application to rebar corrosion protection system to reinforcement Fosroc or equivalent in M/S Sika India Pvt. Ltd. / M / S Choksey Chemicals Pvt. Ltd. / M/S Mapei Const Product India Pvt Ltd. / M/S THermax Ltd / M/S STP / M/S Dr Sunanada / M/S BASFor any other approved manufacturer of E-in-C's branch @3.75Kg/Sqm surface of steel reinforcement in two coats complete all as specified and directed. |
| 12 | M&L for introducing new reinforcement bars of 12mm dia and above for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameter in RCC to a minimum depth 150mm and upto 200mm, including power drilling, fixing the reinforcement in position using, cleaning of loose dust by blowing air, sealing with epoxy cartridges etc all as specified and directed. |
| 13 | Material & labour applying a coat of Polymer modified cementious bonding coat on the concrete surfaces with one part of Styrene Butadiene Rubber latex emulsion (SBR latex) manufactured by M/s Fosroc chemicals or equivalent in M/S Sika India Pvt. Ltd. / M / S Choksey Chemicals Pvt. Ltd. / M/S Mapei Const Product India Pvt Ltd. / M/S THermax Ltd / M/S STP / M/S Dr Sunanada / M/S BASFor any other approved manufacturer of E-in-C's branch with four parts of water and six parts of cement by weight. Coverage of SBR latex-0.25Ltr / sqm for one coat complete all as specified and directed. |
| 14 | Material & labour for providing Shear connectors and Anchoring by drilling 16 mm dia holes up to depth of 100mm in concrete surfaces and fixing 10 mm dia TMT bars L shaped anchor rods as shear connectors by using Fosroc Lokfix chemical (Mix of base and hardener of the polyester resin) in defective concrete area of the slab / column / beams / chajjas / lintel etc or any other structural member as per site requirement after cleaning the drilled hole by using water jet and after drying clean the surface with blower to remove all loose fine particles present in the hole. The Mix of base and hardener of the polyester resin shall be prepared by thorough mixing of base & hardener by the help of spatula. After preparing the mix the holes shall be filled to a minimum depth of 1/3rd of the hole with the prepared polyester resin and the reinforced bar shall be inserted to full depth of hole and extra length of the reinforcement bar shall be bent into the concrete to maintain proper cover to the reinforcement complete all as specified and directed. |
| 15 | M&L for supply, mixing and placement of micro-concrete cement base prepacked single component chloride free, sulphate free, non-shrink flow self compacting,ready to use after mixing in proportion of sika Rep Microconcrete or renderoc-RG of fosroc in required thickness as per manufacture's instruction and all as direction. (Renderoc-RG of Fosroc Makeor equivalent in M/S Sika India Pvt. Ltd. / M / S Choksey Chemicals Pvt. Ltd. / M/S Mapei Const Product India Pvt Ltd. / M/S THermax Ltd / M/S STP / M/S Dr Sunanada / M/S BASFor any other approved manufacturer of E-in-C's branch having a compressive strength of 50 MPA strength for reparing of RCC members like columns, beams etc., complete all as specified and directed. |
| 16 | Material & laobur for application of polymer modified reinstatement mortar in isolated places of repair works of RCC members with Rendroc S2 of M/s Fosroc make or equivalent in M/S Sika India Pvt. Ltd. / M / S Choksey Chemicals Pvt. Ltd. / M/S Mapei Const Product India Pvt Ltd. / M/S THermax Ltd / M/S STP / M/S Dr Sunanada / M/S BASFor any other approved manufacturer of E-in-C's branch having a compressive strength of 40 MPa complete all as specified and directed. |
| 17 | M&L for applying of high efficiency polymeric base film forming curing agent/compound over concrete surface and maximum covarage area 5.0 sqm per litre as per manufactures instruction complete all as specified and directed. |
| 18 | M&F for fixing injection grouting nozzle of suitable size and for Injection grouting for structural cracks with low viscous epoxy resin Conbextra EP10M manufactured by M/s Fosroc chemicals and grouting by injecting the same using an electrically operated pressure grouting Machines until the nipple refuses the grout or the grout come out of a nearby nipples. (The base and the hardener of the epoxy resin come in pre weighed and pre-packed forms and hence should not be part mixed. The entire base and hardener shall be poured in a suitable container and mixed mechanically using a slow speed heavy duty drilling machine fixed with mixing paddles). After grouting, all the nipples shall be cut and the surface shall be finished to match the nearly surface. All the Procedures to be carried out by Manufacturer detailed specifications Note : Conbextra EP 10 M chemical can be measured and paid separately. |
| 19 | Supply only injecting grouting material ,low viscosity epoxy based grouting material Conbextra EP10 complete all as specified and directed. |
| 20 | Supply Liquid water proofing compound all as specified and directed. |
| 21 | Taking down cement plaster on brick or concrete wall etc including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 22 | M&L for 15 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 23 | M&L for rendering 10 mm thick in CM 1:4 on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 24 | M&L for 5 mm thick plastering in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces fair and even without using extra cement all as specified and directed. |
| 25 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of distemper oil emulsion over a coat of primer with 3mm thick putty complete all as specified and directed. |
| 26 | M&L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer with 3mm thick wall care putty on wall on the surface complete all as specified and directed. |
| 27 | M & L for preparation of newly plastered surfaces of walls and applying two or more coats of 100% premium acrylic paint having VOC less than 50 gm/litre and UV resistance a per IS 15489:2004, Alkali & fungal resistance, dirt resistance ecterior paint of required shade company depot tinted with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior promer applied @ 0.9 litre/10 sqm over new surfaces complete all as specified and directed. |
| 28 | Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for and directed and removing debries out side to Dockyard premesis complete all as specified and directed. |
| 29 | M&L for Hardcore (broken stone or boulders) of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 30 | M&L for 75 mm thick cement concrete 1:3:6 Type C2 (using 40 mm graded crushed stone aggregate) in floors (plinth protection) finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 31 | M&L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:3 complete all as specified and directed. |
| 32 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 33 | M&L for pre-cast cement concrete 1:3:6 type C1(using 20 mm graded crushed stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar (1:6) complete all as specified and directed. |
| 34 | M&L for Complete removal of existing treatment on walls old surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces by using Airless spray technology machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be from reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and acccessories for applying paint in hard to reach areas and penetration of paint on the surface complete all as specified and directed. |
| 35 | M&L for paint on walls old surface and applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces by using Airless spray technology machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be from reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and acccessories for applying paint in hard to reach areas and penetration of paint on the surface complete all as specified and directed. |
| 36 | M&L for preparation of old surfaces of wall and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 37 | M&L for preparation of old surfaces of wall and applying one coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 38 | M&L for complete removal of existing treatment on ceiling of old surface and applying two coats of distemper oil emulsion by using Airless spray technology machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be from reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and acccessories for applying paint in hard to reach areas and penetration of paint on the surface complete all as specified and directed. |
| 39 | M&L for preparation of old ceiling surface and applying one coats of distemper oil emulsion by using Airless spray technology machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be from reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and acccessories for applying paint in hard to reach areas and penetration of paint on the surface complete all as specified and directed. |
| 40 | M&L for wall care puty of 2mm thick complete all as specified and directed. |
| 41 | M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying a coat of synthetic enamel paint complete all as specified an directed. |
| 42 | M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying a coat of aluminium paint complete all specified and directed. |
| 43 | Dismantling mild steel work of any description complete all as specified and directed. |
| 44 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channel, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc ., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 45 | M&L MS rolled section of grade Fe-290 Gde -E (beam, tee, angle channel or flat sections) as in framed bracket (framed), including bending welding as neessary including distance pieces, cleats etc. complete all as specified and directed. |
| 46 | M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 47 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling existing one complete all as specified and directed. |
| 48 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifiedd including dismantling existing one complete all as specified and directed. |
| 49 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 50 | S&F anodised aluminium snap grid frame work of size 605x605mm using main runner of dimension 32mm x24mm x0.40mm thick and cross tee of size 26mm x 24mm x 0.4mm ( weight not less than 0.12 kg / Rm) and wall angle of size 22mm x 22mm x 0.35mm ( weight not less than 0.10 kg / Rm) and 12mm thick high performance gyproc mineral fibre ceiling board fixed or laid/ inserted to timber/GI/Aluminium framework with screws, in ceiling with hanger 2mm dia GI (up to 1200mm length) adjusting level fixed to roof slab including cover fillets complete all as specified and directed. |
| 51 | Refixing ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets including taking down the same complete all as specified and directed. |
| 52 | Note: The above quoted items are to be executed with proper safety gears and necessary double scaffolding arrangements to carry out the repair works. The rates quoted shall be accordingly considered for all the safety measure, scaffolding, height, lead and lift in the items. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender