Tender For Addition / Alteration To Building No 06 At Diber Field Station Auli
Tender Value
9.36 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
14 days left
EMD
18720
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chamoli → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition / Alteration To Building No 06 At Diber Field Station Auli
BOQ
| Sl. No. | Item Description |
| 1 | Contract Details |
| 2 | M&L demolition for brickwork or stone boulder masonry built in cement mortar or cement lime mortar inc all quoins, arches, pillars etc complete all as specified and directed. |
| 3 | M&L brick work with sub class B bricks straight or curved on plan exc 6m mean radius using old size bricks built in CM 1:4 complete all as specified and directed. |
| 4 | M&L for demolition of cement concrete in position and of any description complete all as specified and directed. |
| 5 | M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including necessary form work, set in cement mortar 1:4 complete all as specified and directed. (Reinforcement shall be measured and paid for separately under respective item of Schedule 'A'). |
| 6 | M&L for mild steel TMT bars 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 8 | M&L joint free non-skid coloured ceramic tiles 7 to 8 mm thick square (rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and joined in neat cement slurry, & pointed in white or coloured cement to match as specified and directed. |
| 9 | M&L coloured glazed ceramic tiles in vertical surface 450 x 350 x 7 mm thick set and pointed in neat cement slurry and pointed in white or coloured cement to match. |
| 10 | M&L joint free vitrified ceramic tiles light shade 10 mm thick square (rectangular) area of each tile not exceeding 0.36 sqm in floors etc, set in cement slurry and pointed in white or coloured cement to match as specified and directed. |
| 11 | M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick set in cement slurry with pigment to match as specified and directed. |
| 12 | M&L screed bed or bedding layer of mortar 15mm thick for laying floor finish and on surface of walls behind tiles in CM (1:6) as specified and directed. |
| 13 | M&L for backing coat 10mm thick for laying skirting, dados and on surface of walls behind tiles in CM (1:4) as specified and directed. |
| 14 | Taking down of cement or cement lime plaster/skirting/dado of any description from brick or stone wall etc including raking out of joints, hacking and scrubbing down with water etc. |
| 15 | M&L applying 15 mm thick rendering in CM 1:6 on brick concrete surfaces of lint walls finished even and complete all as specified and directed. |
| 16 | M&L for preparation of new plastered surface and applying two coats of oil bound distemper complete all as specified and directed. |
| 17 | M&L for complete removal of existing treatment from walls complete all as specified and directed. |
| 18 | M&L for applying two coats of cement based paint on walls complete all as specified and directed. |
| 19 | M&L for applying two coats of oil bound distemper complete all as specified and directed. |
| 20 | M&L for preparation of new plastered surface and applying two coats of cement based paint complete all as specified and directed. |
| 21 | M&L for preparation of old painted steel or iron surface inc steel gates, grills, trusses at any height, channels, girders, north light curves framing, welded mesh etc over 10cm in width or girth and applying one coat of synthetic enamel paint paint all as specified and directed by engg-in-charge. |
| 22 | M&L for preparation of old wooden surface of any description over 10cm width or girth and applying one coat of Synthetic enamel paint as directed by engg-in-charge. |
| 23 | M&L for framed 2nd class hard wood clean sawn as in framing to ceiling, supports, chowkhtas, windows etc as decided by engg-in-charge complete all as specified and directed. |
| 24 | S&F in repair plywood of thickness 6mm as in ceiling or at any location as directed by E-in-C, grade BWR type BB fixed with screws to framework complete all as specified and directed. |
| 25 | M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and directed by engg-in-charge. |
| 26 | Taking down chowkhat or frame without taking down shutter from the frame area not exceeding 1.50 sqm complete all as specified and directed. |
| 27 | M&L for aluminium frame for doors, windows, ventilators, aluminium flats & aluminium grill including all fitting accessories required as per site condition, with one or more rebates including joining cleats for fixing etc complete all as specified and directed by engg-in-charge. |
| 28 | M&L for powder coated aluminium door shutter aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges and sealed aluminium snap bead using MS screw etc complete all as specified and directed |
| 29 | S&F in repair for looking mirror of size 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup screws complete all as specified and directed. Make of mirror as specified. |
| 30 | S&F in repairs CP angle valve 15mm bore cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed as specified and directed. |
| 31 | S&F in repair for chromium plated shower rose with arms complete all as specified and directed. |
| 32 | S&F in repair rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tank of any description all as specified in SSR Part-I. 500 ltr capacity triple layer, including suitable brass float valve complete all as specified and directed. |
| 33 | S&F in repairs 15mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified. |
| 34 | S&F in repairs 20mm Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified. |
| 35 | Supply and fixed in repair PVC low level flushing cistern 10 Ltr capacity syphonic action type as approved, ball valve float valve and handle incl bracket complete. |
| 36 | S&F in repairs CP bib tap long body 15mm bore cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed as specified and directed. |
| 37 | S&F in repair PVC connection fibre reinforced 300mm long with brass check nuts and PVC washers at both ends. |
| 38 | S&F in repair grating of size 125mm complete all as specified and directed. |
| 39 | S&F in repair CP towel rail 600mm long of fixed with and including chromium plated screw and wooden/plastic cleats complete all as specified and directed. |
| 40 | S&F as per direction of engg-in-charge Aluminium (Extruded section) Door closer hydraulically regulated, designation No. 1 universal type suitable for any door shutters with and of weight not more than 35kg. |
| 41 | Hacking out old broken glass any size thickness from steel frame including removing MS cleats, punching or drilling out old glazing pins/springs etc all as specified. |
| 42 | S&F 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads in square not exceeding 0.50 sqm each pane. |
| 43 | S&F 4.8mm thick sheet glass fixed on aluminium door/frame/windows in square exceeding 0.50 sqm each pane, all as specified and directed by engg-in-charge. |
| 44 | S&F in repair mild steel wire cloth, 0.36mm nominal dia. of wire and avg width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples. |
| 45 | Taking up or down steel tubing and connection 15mm bore pipe. |
| 46 | S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15mm bore. |
| 47 | Taking up or down steel tubing and connection 20mm bore pipe. |
| 48 | S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 20mm bore. |
| 49 | S&F medium grade stainless steel kitchen sink 1mm thick with plugs, washers and waste including bedding in cement mortar over all size 495mm x 420mm, bowl size 410mm x 330mm x 160mm including waste coupling 40mm and waste pipe complete all as specified and directed. Nirali/Parryag ISI Marked. |
| 50 | S&F in repairs brass mortice lock of any size 4 levers complete all as specified and directed. |
| 51 | S&F in repair vitreous china wash hand basin, flat back, white size 550 x 400mm incl bracket, WHB mixture for hot and cold water, PVC waste pipe & waste coupling 32mm dia all as specified and directed by engg-in-charge. |
| 52 | S&F anodised aluminium snap grid framework for false ceiling suspension system size 600mm x 600mm complete all as specified and directed. |
| 53 | Supplied and fixed non-asbestos textured designer ceiling board 4mm thick of size 595 x 595mm fixing with screws/clips complete all as per manufacturer's instructions and as directed. |
| 54 | S&F in repair vitreous china wash down water closet pan (Pedestal pattern) white, including spray jet and seat cover all as specified and directed. |
| 55 | M&L for granite (any colour) 18-20mm thick machine cut, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. Note: Rate also includes making holes for gas pipe/counter washbasin fitting. |
| 56 | S&F in repairs PVC Bath cabinet with mirror 18\\" x 22\\" x 4.25\\". Make: Cat No MCB 253 of Pearl / equivalent in Commander, Prayag. |
| 57 | Taking down old unservicable point wiring,including fittings & fixtures and making good of the surface to match with the existing includinguding touch up of paint/white wash to the disturbed surface of the wall / ceiling,etc., all as specified and directed by Engineer- in-charge. |
| 58 | M&L for point wiring with 1.5 sqmm PVC insulated unsheathed copper conductor multistranded 1100 volts grade single core including one single core 1.5 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor (colour green)drawn through and includinguding PVC casing and capping with all accessories fixed to all type of electrical fittings and earth terminals /earth dolly, complete with PVC rectangular block and rawl plugs fixed to walls / ceilings/ roofs/concealed with & including. 3mm thick MS sheet fabricated terminal boxes, flush mounted for mounting of switches , switch socket combination , fan regulator etc as required withall as specified & as directed for the following :- (a) One light /Ceiling fan/Exhaust fan point controlled by one Switch. |
| 59 | (b) One 3/5 pin switch socket 5/6 Amps on same board. |
| 60 | (c) One 3/5 pin switch socket 5/6 Amps on Independent board. |
| 61 | All as per item No 2 above but with using 2.5 sqmm PVC insulated multi stranded copper conductor with 2.5 sq mm earth continuity conductor for independent switch socket out let 5 pin 5/15 Amps Points. |
| 62 | M & L for Sub main wiring, two single core PVC insulated Copper multistranded conductor size 4 Sqmm and one single core 4 sqmm size ( Green in Colour ) for earth continuty conductor in and includinguding PVC Casing Caping with accessories fixed on walls, Ceiling surfaces etc., including connections at both ends complete including taking down old u/s sub main wiring. |
| 63 | All as per item No 4 above but size of cable 2 runs of 6 Sqmm and one run of 6 Sqmm copper multi stranded PVC insulated unsheathed cables. |
| 64 | Supply and fixing switch piano flush type single pole one way 5 amps |
| 65 | Supply and fix switch socket cobination 2 in 1 5 amps flush type |
| 66 | Supply and fix switch socket cobination 5 in 1 6/16 amps flush type |
| 67 | Supply and fix Lamp holder PVC/Poly carbonate type with back plate |
| 68 | S&F ceiling rose three terminals, ISI Marked.includinguding taking down old u/s ceiling rose. |
| 69 | Supply and fix Sheet metel enclosure for DBs vertical Triple pole & neural double door 415 V with 200 amps rated bus bar 6 way suitable for mounting MCCB & MCBs. |
| 70 | Material and labour for taking out U/S FTL fitting and supply and fix LED light fittings 22W, 220V Ac decorative box type with driver, holder including LED tube light connecting up with three core flexible copper cnductor cable of suitable size from ceiling rose complete. |
| 71 | Supply and fix LED light fitting 1X9W/1X10W bulkhead lumminaires including LEDlight driverholder connecting up with three core flexible copper conductor cable of suitable size. |
| 72 | Supply and fix MCB TPN/FP pole 40 to 100 Amps. |
| 73 | Supply and fix MCB SP 6-32 amps including connecting up & taking down old MCBs complete. |
| 74 | Supply and fix MCB SPN 32 amps including connecting up & taking down old MCBs complete |
| 75 | M & L for earthing complete with GI earth plate electrode 600 x 600 x 6.5 mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron strip 32x6 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I and including necessary excavation and earth work in any type of soil, removal and refilling of soil and funnel with wire mesh and GI watering pipe 20mm dia, Chamber in PCC 1:3:6, type C1 using 20mm graded stone aggregate and 40mm thick cover in RCC 1:2:4, type B1 using 20mm graded stone aggregate and reinforced with 8mm dia TMT bars at 150mm c/c on both ways, handle with 16mm dia round bars and 15mm dia GI pipe upto 7.5m for protection and connected to earthing test point all as specified or indicated including testing on completion. Note:- (i) GI earth lead wire upto 7.5m shall be measured and paid. (ii) PCC chamber shall be provided 50cm away from tthe plinth of building. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender