Tender For Repair/Replacements Of External Water Supply Pipe Lines, Control Valves, Valve Chamber, Pump Sets Starter Panels, Cleaning Of Overhead Tanks And Underground Sumps, Fire Sumps And Connected Works At Technical Area Of Npol Kochi
Tender Value
13 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
17 days left
EMD
26000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacements Of External Water Supply Pipe Lines, Control Valves, Valve Chamber, Pump Sets Starter Panels, Cleaning Of Overhead Tanks And Underground Sumps, Fire Sumps And Connected Works At Technical Area Of Npol Kochi
BOQ
| Sl. No. | Item Description |
| 1 | Labour only for disconnecting and removing Centrifugal pumps of any type coupled with motor upto 15 HP capacity from its foundations/ base frame located at different pump houses, by disconnecting suction, delivery pipes, pump couplers and electrical connections, taking it to workshop for repair and refixing the pump back to its original position after getting repair and making all connections, carry out alignment, testing for satisfactory function all as specified and as directed:- Note: Repairing of pumps/motors shall be measured and paid separately under relevant items. |
| 2 | Dismantling and opening up of PUMP assembly of following capacities complete, removing worn out Gland bush, Housing for bearing, Gland Packing, Balancing, Pin locking set, nuts and bolts, Machining work etc., and replacing with new parts of same make/model/type including necessary machining works, replacement of worn out bearings both DE/NDE, assembling and testing for smooth operation at workshop as required, all as specified and as directed |
| 3 | Centrifugal pumpset of any make /model coupled with 12.5/15 HP motor |
| 4 | Monoblock centrifugal pumpset of make kirloskar pumpset of any make /model coupled with 5 HP motor |
| 5 | Dismantling and opening up of MOTOR AC, Three phase, 415 Volts, 50 Hz , of following capacities, removing burnt out winding wires complete, cleaning stator and rotor assembly, rewinding the stator with same guage and type of insulation copper conductor winding wires and insulation sheets , applying insulating varnish over the complete winding , drying up by heating , assembling back the stator and rotor including replacement of terminal blocks and terminal bolts and nuts, both end bearings with same size / make complete all as specified and as directed |
| 6 | Squirrel cage 3 ph Induction motor of capacity 12.5/15 HP |
| 7 | Squirrel cage 3 ph Induction motor of capacity 5 HP |
| 8 | M&L for painting pumpset including preparation old surfaces and painting with two coats of synthetic enamel paint over a coat of red oxide primer including marking the signs, letters, Nos on the pumpset all as specified and as directed. |
| 9 | Upto 5 HP 3 Phase. |
| 10 | Above 7.5 HP up to 15 HP 3 Phase |
| 11 | M&L for painting of old painted GI pipe of any size on the external surfaces after preparation, located in and out of Pump House, by scrapping and cleaning of external surfaces and applying two coats of Sky Blue paint over a coat of red oxide primer complete all as specified and directed. |
| 12 | M & L for removing the dirt, sediments, silt, alge, fungi etc, from the bottom and walls of the inside of the RCC over head tank of following capacity by dewatering the over head tank by any means and cleaning the complete inner surfces by rubbing / scrapping by wire brush to remove the sludge, washing with bleaching powder solution and then with water and draining out sludge, water completely including applying one coat of white wash to all the inner surfaces, one coat of black bituminous paint(suitable for drinking water application) to metal ladder inside the tank and details of tanks like date of cleaning ,capacity of tanks etc shall be written on the out side of the tank with synthetic enamel paint with letter size 20 cm high in white colour , over a black background of size 100x60 cm all as specified and directed |
| 13 | 1 lakh gallon capacity on 18 mtr staging |
| 14 | 0.5 lakh gallon capacity on 18 mtr staging Please Enable Macros to View BoQ information |
| 15 | 0.5 lakh gallon capacity on 18 mtr staging Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender