Tender For Repair, Replacement Of Ht Poles, Acsr Conductors, Ht Oh Lines, Ht Ug Cables Transformers, God, Vcb, Acb, Lt Ug Cables, Lt Oh Lines, Mccb, Earthing Pit, Lt Panel Boards, Lt Poles And Misc E/M Works At Mil Stn Bhusawal Under Ge (S) Ahilyanag
Tender Value
34.87 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
1 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmednagar → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair, Replacement Of Ht Poles, Acsr Conductors, Ht Oh Lines, Ht Ug Cables Transformers, God, Vcb, Acb, Lt Ug Cables, Lt Oh Lines, Mccb, Earthing Pit, Lt Panel Boards, Lt Poles And Misc E/M Works At Mil Stn Bhusawal Under Ge (S) Ahilyanagar
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge. |
| 2 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge. |
| 3 | Removal of excavated material [soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed by the Engineer - in - Charge. |
| 4 | Dismantling existing cross arms of MS channel or angle sections, nuts, bolts and washer etc from HT/LT pole of any size complete all as specified and as directed. |
| 5 | S & F cross arms, ISMC 100 bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding in any shape or size as indicated or directed and including two coats of aluminium paint over a coat of red oxide primer and anti climbing device comprising 2.24 mm dia galvanised steel 2 strand barbed wire with 2 mm dia barbs wrapped spirally round poles complete all as specified and as directed. |
| 6 | Supply and laying in trenches or fixing or passing through pipe, 1100 Volts grade heavy duty HT UG cable of size 95 sqmm, 3 core with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall sheathed including cable gland, lugs, jointing material etc and jointing, connecting, testing and commissioning including taking out existing cable alongwith protection covers complete all as specified and as directed. |
| 7 | Dismantling steel tubular swaged pole with accessories complete all as specified and directed. |
| 8 | Supply Installation and erection in vertical position steel tubular swaged poles, type 410 SP-55 (11.0 metres long) with 300mm x 300 mm X 6 mm Size steel base plate continuously welded to pole, MS steel plate of 3 mm thick final taper plug bolt, nuts and screws all as specified including factory painted with two coats of black bituminous paint internally through out and externally for embedded portion and applying two coats of aluminium paint over a coat of red oxide primer on remaining exposed surfaces after eretion complete all as spedified Zebra painting with black and white paint upto 1.5 mtr height from ground level and pole marking complete all as specified and as directed. |
| 9 | Dismantling Air break gang operated switches including insulators and operating mechanism accessories etc. |
| 10 | S & F HT 11 KV out door type gang operated gang operated air break switch triple pole mechanically operated, suitable for horizontal or vertical mounted on insulators and steel frame, with drop out fuse unit having 12 insulators and operating mechanism worked from ground level for current rating 200 Amps complete all as specified and as directed. |
| 11 | S & F Lighting arrester expulsion type complete with all fittings, transmission class, discharge capacity 65 kilo Amp, accessories with fixing arrangment including old unserviceable one complete all as specified and as directed. |
| 12 | M&L for HT Cable end termination joint suitable for 11000 Volts grade 95 Sqmm 3 Core XLPE 11KV cable, outdoor, heat shrinkable type with all accessories complete all as specified and directed. |
| 13 | M&L for HT Cable straight through head shrikable type joint suitable for 11000 Volts grade 95 Sqmm 3 Core XLPE 11KV cable, outdoor, heat shrinkable type with all accessories complete all as specified and directed. |
| 14 | S&F HT cable route indicator cast iron of suitable size with hight of 1.5 metre alongwith HT cable trench including planting in ground with PCC complete all as specified and directed by Engr-in-Charge. |
| 15 | Supply and fixing danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for HT, 25x20 cm size all as specified and directed. |
| 16 | Supply & laying DWC Cable duct pipe of size 110 mm bore confirming to IS :16205 Part 24 for laying of LT cables etc complete with all accessories all as specified and directed. |
| 17 | Supply & laying DWC Cable duct pipe of size 50 mm bore confirming to IS :16205 Part 24 for laying of LT cables etc complete with all accessories all as specified and directed. |
| 18 | Supply & laying DWC Cable duct pipe of size 63 mm bore confirming to IS :16205 Part 24 for laying of LT cables etc complete with all accessories all as specified and directed. |
| 19 | Supply & laying DWC Cable duct pipe of size 77 mm bore confirming to IS :16205 Part 24 for laying of LT cables etc complete with all accessories all as specified and directed. |
| 20 | Supply & laying DWC Cable duct pipe of size 40 mm bore confirming to IS :16205 Part 24 for laying of LT cables etc complete with all accessories all as specified and directed. |
| 21 | Supply and laying in trenches or fixing or passing through pipe, 1100 Volts grade heavy duty LT UG cable of size 300 sqmm, 3.5 core with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall sheathed including cable gland, lugs, jointing material etc and jointing, connecting, testing and commissioning including taking out existing cable alongwith protection covers complete all as specified and as directed. |
| 22 | All as per serial item No 21, but 95 Sqmm 3.5 core |
| 23 | All as per serial item No 21, but 70 Sqmm 3.5 core |
| 24 | All as per serial item No 21, but 50 Sqmm 3.5 core |
| 25 | All as per serial item No 21, but 35 Sqmm 3.5 core |
| 26 | All as per serial item No 21, but 25 Sqmm 3.5 core |
| 27 | All as per serial item No 21, but 16 Sqmm 4 core |
| 28 | All as per serial item No 21, but 10 Sqmm 4 core |
| 29 | S&F in repairs galvanised steel tube light grade for protection of cable for the following sizes complete all as directed by Engineer-in-Charge. (a) 80 mm dia |
| 30 | All as per serial item No 29, but 50 mm dia |
| 31 | All as per serial item No 29, but 40 mm dia |
| 32 | Supply & Fixing in replacement GI strip of size 32 x 6 mm buried in ground/fixed to pole, wall including fixing clamp made out of 40x5 mm MSFI nut, bolt and washers complete including taking out old GI strip all as specified and directed by Engr -in -Charge. |
| 33 | S & F in replacement Air termination, single pointed aluminium rod 12mm dia and 300mm long all as specified & directed by Engg-in-charge. |
| 34 | S & F in replacement Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw all as specified & directed by Engg-in-charge. |
| 35 | S & F in replacement Aluminium strip 25 x 3 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground all as specified & directed by Engg-in-charge. |
| 36 | M & L for Preparing surfaces of LT pole by scrapping old paints and applying one coat red oxide primer and two coats of aluminium paint and writing \\"T\\" and Pole No in black paint etc complete all as specified and directed by Engr- in -Charge. |
| 37 | M & L for replacement of jump connection of two/four pole structure by using ACSR conductor weasel, alkathine pipe ,aluminium lugs, nuts, bolts etc. all as directed by Engineer-in-charge.Note : Rates includes Conductor, Pipes, Lugs, Nutbolts etc. |
| 38 | Dismantling stay assembly complete.(demolition of concrete, etc. and excavation measured separately) |
| 39 | S&F Stay assembly complete with accessories as shown in electrical plate No-1 (loop type insulator, stay clamps, excavation and concrete measured separately) with stay rod 16mm dia, MS plate 6mm thick size 230x230mm, complete, all as specified and directed by Engr-in-Charge. |
| 40 | M & L in replacement Earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.0 mm thick buried directly in ground in any type of strata (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the GI strip 32 x 6mm, by means nut bolt, nuts, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 40 mm incl provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregated with 40 mm thick cover with RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2020 and connection to earth test point all as specified incl testing on completion”.Note:The unit Rate includes earth strip and protection pipe up to (max 7.5 metre) from earth plate/earth point/test point. |
| 41 | Material and Labour for dehyderation, filtration and cleaning of transformer oil, both indoor/outdoor/ pole mounted/plinth mounted 400/200 KVA, HT switch gear etc at different locations by suitable dehgydration plant testing of oil sample before and after dehydration for each transformer/equipment and results of transformer oil dielectric strength minimum upto 42 KV , recorded jointly by contractor and Engineer-in-Charge complete including all necessary tools, plants, transportation etc all as specified/directed by Engineer-in-Charge.Note : Oil for topping up/fresh fill shall be measured and paid seperately under relevant item. |
| 42 | Supply & filling of transformer oil in transformer in situ/ at site for toping up the level of oil having dielectric strength 40-60 KV during filling after initial filtration conforming to IS-335 of make POWER/INSOLE/UNIVERSAL (Transformer oil shall be supplied in sealed container and empty barrel of transformer oil will be deposited by contractor in E/M store yard) |
| 43 | M&L for repair to transformer pole mounted/plinth mounted of any capacity to stop the leakage of transformer by lifiting core assembley with the help of chain pully block/crane, removing transformer oil, replacing cork sheet gasket 5mm thick, reassembling, the transformer completely refilling transformer oil, connecting HT/LT connection,and required for replacement of unserviceable nuts/bolts/washer all as directed by Engineer-in-charge (Note : Spares required shall be measured and paid separately ) |
| 44 | M&L for replacement of breather assembley with silica gel. |
| 45 | S & F in replacement of HV rod brass, 12mm dia with brass nut 2 Nos and rubber bush 300mm long all as directed by Engineer-in-Charge. |
| 46 | S & F in replacement of LV rod brass 15mm/20mm dia, 300mm long with rubber bushing and brass nuts 2 Nos all as directed by Engineer-in-Charge. |
| 47 | S & F in replacement MCCB 400 Amp 4 pole 36 KA complete all as specified and directed. |
| 48 | S & F in replacement MCCB 250 Amp 4 pole 36 KA complete all as specified and directed. |
| 49 | S & F in replacement MCCB 160 Amp 4 pole 36 KAcomplete all as specified and directed. |
| 50 | S & F in replacement MCCB 25-100 Amp 4 pole 16 KA complete all as specified and directed. |
| 51 | Supply and fixing 415V MCB TPN 100 Amps 10 KA1 'C' Curve complete with connection testing and commissioning. |
| 52 | Supply and fixing LT cable route indicator cast iron of suitable size with height of 0.6 metre along with LT cable trench including planting in ground with PCC complete all as specified and directed.by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 53 | Supply and fixing LT cable route indicator cast iron of suitable size with height of 0.6 metre along with LT cable trench including planting in ground with PCC complete all as specified and directed.by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender