Tender For Periodical Services Including All Civil Work Such As Path,Fencing,Gate,Door,Window,Plinth,Tiling Work Etc For E/M Installation Under Ge Ima Dehradun.
Tender Value
45 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services Including All Civil Work Such As Path,Fencing,Gate,Door,Window,Plinth,Tiling Work Etc For E/M Installation Under Ge Ima Dehradun.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Oct-2026 | Revised BOQ | BOQ | 29-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for 300x300x25mm thick (M-35) glossy finish polished red color Chequered cement concrete tile of any pattern as decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed in cement mortar 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed & PCC of any description and in any position complete all as specified and directed. |
| 2 | S&F Rubber moulded precast coloured concrete Interlocking paver blocks any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with & including 30 mm thick sand cushioning layer including dismantling of existing interlocking tiles & PCC etc complete, all as specified and directed. |
| 3 | M&L for dismantling precast coloured concrete Interlocking paver blocks any shape and size and refixing over & including 30 mm thick sand cushioning layer complete, all as specified and directed. |
| 4 | M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in , coping, benching, bed block, etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed. |
| 5 | PCC 1:4:8 type D-2, (using 40 mm graded crushed stone aggregate) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed |
| 6 | M&L for Glazed ceramic coloured tiles of size 450 mm x 350 mm x 7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding and removing rubbish off the premises complete all as directed. |
| 7 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.6 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed. |
| 8 | M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed aggregate )as in flooring surface finished even and smooth without using extra cement to receive the topping layer complete all as specified and directed |
| 9 | M&L, for PCC 1:2:4 , type B0 ( using 12.5mm graded crushed stone aggregates) as in roof padding, laid in proper slope and finished fair and even, complete all as specified and directed. |
| 10 | Providing 20mm thick plaster in ready mix plastering over roof mixed with (Water proofing compound) (Liquid) as per manufacturers instructions including brushing neat cement slurry @ 3 Kg/Sqm over Old RCC roof including taking down existing plaster on roof complete all as specified and as directed. Note : Water proofing compound (liquid) shall be measured and paid seperately. |
| 11 | M&L, for roof treatment through manufacturer /authorized applicator of the manufacturer as approved by GE by applying a coat of Cold applied bituminous oil based primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen VG- 30 grade @ 1.00 Kg/Sqm after a interval of minimum 8 hours of priming and layilg of APP modified five layer polymeric membrane 3mm thick, minimum weight 3.60 kg/sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) with torch application method after a interval of minimum 8 hoursof hot bitumen coating by authorised applicator of manufacturer of IWL/STP/Texas India/ Hydrotech Ltd/Sikka, laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm etc complete including taking down existing roof treatment of the RCC slab, cleaning off all foreign matter by wire brushing, cleaning off surface with water and removal of spoil etc including removal of debris from site beyond defence land,complete all as specified nand directed. Note :- 1. Work shall be carried out as per manufacturer's instructions by authorised applicator as approved. 2. Work shall be executed upto triple storied building. |
| 12 | Taking down existing broken portion of upward, downward / inverted RCC facia or roof slab or visible concrete reinforcement of any thickness and shape and surface repaired by providing cement concrete 1:2:4 type B1 (using 12.5 mm graded stone aggregate) mixed with quick setting adhesive inclusive of all necessary reinforcement / chicken wire mesh and other material including finishing the surface by rendering 10 mm thick plaster in CM 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering slightely rounded or chamfered angles and throating over and including priming newly surface with application of one coat of primer, 2 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified (work to be carried out upto a height of 7.5 m height and rate shall be inclusive of all necessary scaffOlding and shuttering) . Note: Reinforcement /mesh (if required) shall be measured and paid separately under respective items of this BOQ) |
| 13 | Mild steel TMT bars 8mm dia and over, bent to shape required including cranking bending and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as directed. |
| 14 | M&L, for cutting out cracks to V-section, 15mm X 15mm on existing roofs or terracing, cleaning out, wetting etc and filled solidly with Sika cracksil or Dr Fixit 201 Crack X paste or, Asian paint Smart care crack seal as per manufacturers instructions, finished the roof suface properly, all complete as specified and directed. |
| 15 | Supply and fix wire netting of galvanised steel wire 0.71 mm dia and size of mesh is 12mm fixed in properly with suitable nails for repair of cracks at various locations in wall, beam, chajja, facis, slab, lintel etc including taking down plaster of cracked portion and making good the area by rendering in CM 1:3 complete all as specified and directed. |
| 16 | Brick work with sub class 'B' bricks (Old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) incl demolition of existing brick work complete all as specified and directed |
| 17 | M&L Brick work with sub class 'B' bricks (Old size), straight or curved on plan to any radius in half brick thick wall built in CM (1:4) complete all as specified and directed. |
| 18 | Taking down cement or cement lime plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 19 | Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed. Note-water proofing compound shall be measured and paid separately. |
| 20 | Rendering 15mm thick plaster on other than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 21 | M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, complete, all as specified. |
| 22 | Supply only liquid water proofing compound complete all as specified & directed |
| 23 | M&L for prepolished Machine cut kota stone slab flooring mirror finished 20-25 mm thick (each slab not less than 0.25 Sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 20 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete incl dismantling of Old kota stone all as specified and directed. |
| 24 | Cutting and grinding of existing Granite/kota/terrazo stone floor surface(2cut) on horizontal and vertical surface and finally finishing the surfaces uniformally by applying floor polish complete all as specified and directed |
| 25 | S&F Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete all as directed including dismantling existing AC sheet complete all as specified and as directed. |
| 26 | Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed. |
| 27 | S&F Pre- painted colour galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet complete all as specified and directed. |
| 28 | S & F Mild steel sheet eaves gutters 1.25mm thick 150mm dia, galvanised class 3, half round with rounded edges etc complete all as specified and directed. |
| 29 | S&F rolled mild steel section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connected plates of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed |
| 30 | M&L for for Factory made Precast heavy duty RCC drain cover 80mm thick with using 10mm dia reinforcement TMT bar including 1.00mm thick MS black sheet frame on edges with two coats of antecorresive paint over primer all complete, as specified and directed. |
| 31 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails braces etc complete drilled for fixing of steel sheeting or other covering doors etc with including either hooks and hinges or steel hanging doors dittings also fastening and fixing conforming to Fe 410W Gde E 250 complete all as specified. |
| 32 | S & F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed. |
| 33 | PVC lid for PVC water tank of any capacity upto 1000 Ltr with hinging device and locking arrangement with necessary nuts, bolts and washer etc fixed in repair complete all as directed. |
| 34 | S&Fin repairs Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms complete all as directed. |
| 35 | S&F MS Plates (plain or chequered), square cut or notched (ordinary and countersunk) forming holes with riveted, bolted or welded attachment Fe-290 Gde E-165 complete all as specified and as directed. |
| 36 | S&F, 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed. |
| 37 | S&F, 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed. |
| 38 | S&F in repairs 20 mm bore gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed, all as specified. |
| 39 | S&F in repairs CP angle valve, fancy type long body for 15 mm bore pipe with capstan head long screwed shank including cp cover plate complete all as specified & directed. |
| 40 | S&F in repairs long body 15mm bore bib tap, fancy type, chromium plated, cast copper alloy, with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed. |
| 41 | S&F in repair PVC 10 litres capacity valveless ,syphonic action type low level flushing cistern ,white including flush pipe, cantilever brackets ,inlet, ball valve, float and handle, PVC connection 15mm dia etc complete all as specified and directed. |
| 42 | S&F in repairs brass CP pillar taps 15mm bore with capstan head, screwed down high pressure with orwithout lettered hot or cOld with long screwed shanks and fly nuts, screwed to iron pipe |
| 43 | S & F in repair brass chrominium plated tubular towel rail 20mm dia ,D type, 60cm long between flanges complete all as specified and directed. |
| 44 | S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 45 | S & F for looking mirror of selected quality glass,5.5 mm thick and fixed to wooden /PVC plugs with chromium plated brass screws and cup washers |
| 46 | Supply and fixed in repair of vitreous china squatting pan 'Orissa pattern' size 580 x 440 mm white with integral foot rest including replacement of 'P' or 'S' CI trap, PVC connector concrete bedding and making good floor complete all as specified and directed. |
| 47 | S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, and incl 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange incl PVC waste pipe end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete, all as specified and directed. |
| 48 | Supply and fixing in repair Vitreous China urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe,with bottle trap, CP grating and Union for discharge pipe, complete all as specified and directed. |
| 49 | Supply and fixing 15 mm bore CP Urinal spreader for urinals, complete all as specified and directed. |
| 50 | S&F MS work as in fencing posts and struts in fencing including cutting tops to shape as directed,drilling holes,notching for wire etc,flat iron fillets(for securing wire mesh etc) including all necessary drilling,bolting or riveting etc and similar work confirming Fe-290 Gde E-165 to including embedding in concrete complete all as specified and directed. |
| 51 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion & making good disturbed ground embedded in Normal ground |
| 52 | Dismantling fencing wire mesh, any type |
| 53 | S & F 4mm dia PVC Coated chain link Fencing of weight not less than 3.5 Kg/ Sqm made up into matresses or cages,lapped, wired and laid in position, including closing after filling complete all as specified and directed.Note ;- Mesh Size to be approved by Engr-in Charge as per site requirement. |
| 54 | S/F mild steel screw bolts (machine made) with hexagonal or square heads at one end and 'scraved the other to be fitted with washers and one hexagonal or square nut n.exc 5 cm long and dia 5 to 10 mm |
| 55 | M&L, MS round bars 10 mm dia and over cut to length, bent to shape reqd incl cranking bending etc and binding with MS wire (annealed) not less than 0.9 mm dia as in chain link fencing fixing |
| 56 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below and above ground level, complete all as specified and directed. |
| 57 | M&L for 100 mm thick Cement concrete typeB-2, 1:2:4 using 40 mm graded crushed stone aggreates as in flooring even & smooth complete all as specified and directed complete all as specified and directed. |
| 58 | M&L 75mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork etc complete all as specified and directed |
| 59 | M&L PCC 1:2:4 type B2 ( with 40 mm graded agrregate) in Surface channel or drains including necessary form works , stops ,moulds etc complete all as specified and as directed. |
| 60 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including necessary forms mould mitred /stopped ends etc |
| 61 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed |
| 62 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area .exc 1.50 Sqm and n exc 4.00 sqm each complete all as specified and directed |
| 63 | Taking down shutter of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed |
| 64 | S&F Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 088 Sheet 1/17 to 17/17. |
| 65 | S&F Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with out glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 088 Sheet 1/17 to 17/17. |
| 66 | S&F Steel ventilator factory made with top hung shutter including hinges and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 088 Sheet 1/17 to 17/17. |
| 67 | Hacking out old broken glass (any thickness size and quality and description) from wooden/steel frames glazed with putty or fixed with beads etc complete all as specified and directed |
| 68 | S&F Pressed steel frame of 105x60 mm section for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plates etc including PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate as in back filling complete all as directed. |
| 69 | S&F Pressed steel frame of 125 x 60mm section for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plates etc including PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate as in back filling complete all as directed. |
| 70 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing in SSR complete all as specified and directed |
| 71 | S&F Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC \\"C\\" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2020 etc complete all as specified and directed |
| 72 | 35mm thick flush shutter solid core construciton with partical board core and plywood face panels commercial type on both sides complete all as directed. |
| 73 | 35mm thick IInd class hard wood factory made glazed and skeleton shutter open rebated and prepared to receive glass gauge/(with sash bar) edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass or gauge etc size of members of shutters as specified in SSR Part I section 8 clause 8.24(a) completed all as directed. |
| 74 | S&F PVC cabinet shutter as in Cup board, wardrobe etc with frame of min size 60mm x 44mm including shelves in required sizes at site made out of 18 mm thick one side decorative lamination & other side balancing lamination sheet & provision of shutter made out of 18 mm thick one side decorative laminated PVC sheet all required brackets stainless steel screw etc the panels shell be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bend finish including all necessary fitting as per site requirement and as per make and specification mentioned complete all as specified and directed. Note:- Density of PVC solid sheet should not be less than 575 kg/M3. |
| 75 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks, or galvanished wire staples |
| 76 | S&F 3mm thick sheet glass ordinary quality & glazing with oil putty or wooden beads in square area not exc 0.5 Sqm in each pane, complete, all as specified and directed. |
| 77 | S&F stainless steel butt hinges, 100mm long, medium weight, complete all as specified and directed. |
| 78 | S&F 300 mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as directed. |
| 79 | S&F 150mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed. |
| 80 | S&F 300 mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed |
| 81 | S&F 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/mild steel chowkhat complete all as specified and directed. |
| 82 | S&F 150mm size stainless steel fancy type handle, complete all as specified and directed. |
| 83 | S&F 100 mm long Hasp & staple, safety type, Stainless steel with mild steel hinges pin including bolt to hinges plate & fixed with screw, complete all as specified and directed. |
| 84 | S & F Continuous (piano) hinges, 30 mm width mild steel, bright finish or electrogalvanised complete all as specified. |
| 85 | S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, and similar work complete all as specified and directed |
| 86 | Welding in repair in n.exc 2.5cm in length thickness of metal to be welded exc 6mm not exc 9mm in different location complete all as specified and directed. |
| 87 | S & F, in repair , 110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints laid in floors or trenches, complete all as specified and directed by Engineer-in-charge. |
| 88 | S & F, in repair , 75mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints laid in floors or trenches, complete all as specified and directed by Engineer-in-charge. |
| 89 | S&F in repair 110mm dia PVC (SWR) WC connector with lip ring for WC outlet, complete all as specified and directed . |
| 90 | S&F in repairs PVC (SWR) bend 110 mm any radius complete all as specified and directed. |
| 91 | S&F in repairs PVC (SWR) bend 110 mm any radius with access door, complete all as specified and directed. |
| 92 | S&F in repairs PVC (SWR) bend 75mm any radius complete all as specified and directed. |
| 93 | S&F in repairs PVC (SWR) bend 75mm any radius with access door, complete all as specified and directed. |
| 94 | S&F in repairs, PVC (SWR) floor trap of outlet diameter 75mm, plain with grating including jointing with solvent cement , complete all as specified and directed. |
| 95 | S&F, Steel rolling shutter with 1.25mm thick laths, gear operated type with bevel gear box and crank handle including top cover, anchoring rod, hasp and stable and one shop coat primer, errected in position as indicated, including dismantling of Old unserviceable rolling shutter, all complete as specified. |
| 96 | Taking down carefully unservicable steel rolling shutter of any size and any type including top cover, anchoring rod, hasp and stable, gear box and re-errection in same position after replacement of unsevicable components like ball bearing, safety lever lock, bevel gear box, laths etc including oiling, greasing as indicated to make the rolling shutter smooth functional, all complete as specified and directed. |
| 97 | M&L for complete removal of exisiting finish/preparing newly plastered surface (with mechanical sander machine) on walls and applying exterior grade water proof putty of min 1 mm thickness to prepare the surface even and smooth and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as speciifed. Note:- Paint to be applied with airless spray machine . |
| 98 | Preparation of Old plastered surfaces of wall and applying one coat of weather exterior emulsion paint (Apex paint of Asian Paint / Weather proof of berger) on walls complete all as directed. |
| 99 | M&L for complete removal of exisiting finish/preparing newly plastered surface (with mechanical sander machine) on walls and applying putty care putty of min 1 mm thickness to prepare the surface even and smooth and applying two or more coats of OBD |
| 100 | M&L for preparation of Old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil emulsion distemper (OBD) of approved shade/tint complete, all as specified & directed. |
| 101 | M&L for preparation of Old decorated surfaces of ceiling by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil emulsion distemper (OBD) of approved shade/tint complete, all as specified & directed. |
| 102 | Material and labour for preparation of newly plastered surface on wall and applying two coats of distemper oil emulsion over a coat of primer over one coat of wall care putty of not less than 2.0 mm thick including preparation of surfaces complete all as specified and directed. |
| 103 | Material and Labour for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including preparation of surfaces complete all as specified and directed Note:- Painting to be executed by mechanical means through authorized applicator of approved make. |
| 104 | Material and labour for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer, over a coat of wall care putty complete all as specified and directed.Note:- Painting to be executed by mechanical means through authorized applicator of approved make. |
| 105 | Writing letters or figures (Block, Italic or vIndian n exc 30CM high) on vertical wall with synthetic enemeal paint |
| 106 | Desluding/ cleaning of rin water drain , culvert nd removal of sludged out side of defence land |
| 107 | Preparation of Old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed. |
| 108 | Preparation of Old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed. |
| 109 | Preparation of new wooden surface of any description over 10 cm width and girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 110 | Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 111 | Material and labour for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry @ 2 Kg per SQM, mixed with pigment to match the shade of the slab incl rubbing and polishing, laid over and including 10mm thick screed in cement mortar 1:4, complete all as specified and directed |
| 112 | Material and labour for cutting grooves in brick wall, 75mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and directed. |
| 113 | Material and labour for rendering dubbing coat over damaged irregular surface of chajjas roof projections/ ceiling/ facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even and smooth including making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water all as specified. Note : Rate for form work incl in the rate quoted by the contractor. |
| 114 | Supply, installation,commissioning and testing factory made LT panel board suitable for 3 phase, 4 wire, 440 Volts AC supply, indoor cubical type, dust and vermin proof powder coated, made out of 3.15 mm thick CRCA sheet (not less than 2 m x 1.5 m x .7 m) with angle iron frame made out of MS angle 50 x 50 x 6 mm both side openable double door type with proper locking arrangements duly finished with using powder coated paint of approved colour over a coat of red oxide primer all over steel surfaces with 75 cm high angle iron legs welded on four corners of frame embedded in PCC 1:2:4 using 20 mm graded stone aggregate upto 30 cm foundation and proper glanding, lugs and nuts bolts etc for all cables and comprising of following accessories including disconnecting and dismantling existing panel etc complete all as directed with sufficient working space with and including to accomodate the following accessories: -(a) Aluminium bus bar 2000 Amps rating 3 phase 4 wire system. (b) Digital voltmeter 0-500 V - 01 Nos. (c) Digital ammeter 0-400 Amps with CTs - 01 Set of three (d) LED type indicator 230 volts for RYB - 01 Set. (e) ACB 4 Pole, 415 V, with Thermal Magnetic Release (Manual Drawout type) of capacity 1250 Amps with breaking capacity 50 KA-01 Nos (Incoming).Outgoing:-(a MCCB 4 Pole, 415 V, Adjustable type,400 Amps with breaking capacity 36 KA- 01 Nos (b) MCCB 4 Pole, 415 V, Adjustable type,315 Amps with breaking capacity 36 KA - 3 Nos (c) MCCB 4 Pole, 415 V, Adjustable type,250 Amps with breaking capacity 36 KA - 1 Nos (d) MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 16 KA - 1 Nos (e) MCCB 4 Pole, 415 V, Adjustable type 63 Amps with breaking capacity 16 KA - 1 Nos (f) MCCB 315 Amp 4 Pole, 415 V (spare) Note: (a) MCCBs shall be installed in separate compartments.(b) Before procurement, contractor shall submit the single line diagram of LT panel board and get it approved by GE. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender