Tender For Comprehensive Maintenance To B/R Services In Certain Buildings In Zone B At Technical Area At Af Station Suratgarh
Tender Value
50 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
3 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance To B/R Services In Certain Buildings In Zone B At Technical Area At Af Station Suratgarh
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-Oct-2026 | Corrigendum_01 | Date | 06-Nov-2026 |
| 2 | 06-Nov-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | BOQ (COMPREHENSIVE MAINTENANCE TO B/R SERVICES IN CERTAIN BUILDINGS IN ZONE ‘B’ AT TECHNICAL AREA AT AF STATION SURATGARH ) |
| 2 | Demolition of brick masonry built in cement mortar including all quoins, arches and removing rubbish from site etc. complete all as specified and directed. |
| 3 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cm 1 : 6 complete all as specified and as directed by Engr-in-Charge. |
| 4 | All as per Ser item No 2 here in before but using old bricks |
| 5 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish from the premises. complete all as specified and as directed. |
| 6 | M&L Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors all as specified by Engineer-in-charge. |
| 7 | M&L Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified by Engineer-in-charge. |
| 8 | Post construction treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.50 ltr / hole by drilling 6mm dia. Hole at a down ward angle of 45 degree at 150mm centre to centre snd sealing the same complete all as specified and directed by Engr-In-Charge. |
| 9 | Demolition of cement concrete (un-reinforced ) of any description in ground floors and paving not exceeding 15 cm thick (below or above the ground level) and removing rubbish from the premises. complete all as specified and directed. |
| 10 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each and removing from site complete all as specified and direcetd. |
| 11 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each and removing from site complete all as specified and direcetd. |
| 12 | Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each and removing from site complete all as specified |
| 13 | M&L for factory made Pressed steel frames of size 105mmx60mm made of 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified. |
| 14 | M&L for PCC 1:3:6 type C0 (using 12.5mm graded stone aggregate) as in hold fast iron fixing and back filing of pressed steel door frame including necessary form work all as specified. |
| 15 | S&F factory made 35 mm thick 2nd class Hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated completely all specified and directed. |
| 16 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified. |
| 17 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification. |
| 18 | S&F butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked), complete all as specified. |
| 19 | All as per Srl Item No 16 here in before but 75 mm long. complete all as specified. |
| 20 | S&F as in replacement Stainless Steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed. |
| 21 | S&F Aluminum handles, 150 mm size cast type complete all as specified and directed. |
| 22 | S&F stainless steel 20 mm dia curtain rod thickness of pipe not less than 1.0 mm including stainless steel brackets and stainless steel end knobs fixed with plugs & screws, complete all as specified and directed. |
| 23 | S&F of 35 mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type back side and one face is covered with decorative face veneer with lipping/frame to match, fitted to chowkats complete all as specified and directed by Engr-in-Charge. |
| 24 | M&L in replacement 12mm thick Block boards, ISI marked, interior grade, commercial type, fixed with Glue /screws to timber/wall with 50mm SS Screws with plastic plugs, as battens, cupboars,shelevs etc ,including covering borders/thickness with PVC tape of approved colour and design, complete all as specifed and as directed. |
| 25 | M&L for 18 mm thick plywood (13 no. of ply ) ISI marked fixed with Glue /screws to timber/wall with 50mm SS Screws with plastic plugs, as battens, cupboars,shelevs including covering borders/thickness with PVC tape of apprpved colour and design, etc ,fixed in repairs , complete all as specifed and as directed. |
| 26 | S&F in replacement stainless steel Cup and Saucer basket of size(370x485x100mm) ,any Description and fitted to a telescopic drawer channel and board for smooth movement and sample approved by the Engr-in-Charge/GE |
| 27 | S&F in replacement stainless steel Perforated Cutlery basket of size(370x485x100mm) any Description and fitted to a telescopic drawer channel and board with smooth movement, complete all as specified and as directed. |
| 28 | S&F in replacement stainless steel Perforated plate basket of size(370x485x200mm) any Description and fitted to a telescopic drawer channel and board with smooth movement, complete all as specified and as directed. |
| 29 | M&L for 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium frame work ,complete all as specified and as directed. |
| 30 | S&F in replacement 18 mm thick HDHMR Board (Scratch and strain free) (density over 850 kG/sqm) in Door, Shelves for Kitchen Cabinets, jointed to form cabinet by means of PVC Adhesive Solvent and fixed using Self-tapping Steel Screws, etc., including covering borders/thickness with PVC tape of approved colour and design,complete all as specified and as directed. |
| 31 | M&L for 1.0 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions® pasted on wooden surfaces complet all as specified and as directed. |
| 32 | M&L for 0.82 mm thick Plain laminates type I, pattern as approved pasted on wooden surfaces complet all as specified and as directed. |
| 33 | S& F in replacement factory made box type glazed and gauged steel window/ventilator made out of ERW hollow P&T section of size 50 x 25 mm. Both window to be welded together with flat iron 25x3mm to outer frames on both sides complete all as specified including MS grill complete and including shop coat redoxide primer with following fittings welded to frame/shutter:-(a) Hold fast 150mm long 25mmx6mm iron made to shape-02 Nos in each window (both sides)(b) Handle of 'Z' section 20mmx25mm Each leaf(c) 100mm stopper-01 No per leaf.(d) MS tower bolt 150mm long - 02 Nos in each leaf.(e) Cleat 55mm long of hollow square 15mm x 15mm x 24mm welded to hinges gauze wall thickness welded to hinges of 50mm size-01 No per leaf.(f) MS box type hinges of size 75x12mm-03 Nos per leaf(g) Fabrication & fixing complete(h) Flat iron for fixing.Note:- (i) Glass panes, wire gauze and painting shall be measured & paid Separately under respective items. |
| 34 | S&F 300mm long aluminium alloy, anodised, sliding door bolt and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium and fixed. |
| 35 | S&F, Aluminium anodised barrel tower bolts, 150 mm long , of extruded section and fixed . complete all as specified. |
| 36 | All as per srl item No 34 here in before but 200 mm tower bolts. Complete all as specified. |
| 37 | S&F in replacement brass 4 Lever mortice lock, vertical type,size 100mm complete all as specified . |
| 38 | S & F for Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as specified and directed by Engineer-in-Charge. |
| 39 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fastenersof required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snapbeading for glazing/ paneling, C.P. brass/ stainless steel screws all complete and the directions of Engineer-in-charge. Note :- Glass/ wire gauge shall be measured and paid separately. |
| 40 | M & L for anodised Aluminium frame works such as grills with frames and frame guard bars and similar works. Complete all as specified and directed |
| 41 | S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, holdfast and concrete bed block complete with outer side glazing bars shutter and inner side wire mesh shutter including glass panes, dovetailed or welded complete all as specified and directed. |
| 42 | M&L sheet glass 5.5mm thick, ordinary quality and glazing with, rubber packing exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge |
| 43 | S & F as in replacement Aluminium die cast body door closer hydraulically regulated designation No. 3, universal type suitable for door shutter 851 to 1000 mm in width and 61 to 80 Kg in weight complete all as specified and directed. |
| 44 | S&F as in replacement Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and complete all as specified and directed. |
| 45 | S&F in replacement Heavy duty 500 mm telescopic drawer channel fitted to HDHMR Board with screws and stainless steel basket for smooth movement, complete all as specified and as directed and approved by Engr-in-Charge. |
| 46 | S&F in replacement Magnetic Door Catcher to hold approx 1000 mm opening cabinet door complete all as specified and as directed and sample approved by the Engr-in-Charge/GE. |
| 47 | S&F in replacement Frog hinges/slip on cabinet hinges by making adequate hole in 18 mm board from inside and fixed to cupoard shutter and frame by screw, complete all as specified and as directed and sample approved by the Engr-in-Charge. |
| 48 | S&F in replacement Stainless Steel Silver chrome Door handle 100mm long, screwed from inside the Shutter complete all as specified and as directed and sample approved by the Engr-in-Charge. |
| 49 | S&F in replacement New Horizontal venetian Blinds of special collection self adjusting of louvers size 100 mm wide with aluminium top rail (Powder coated dark shade / wood finish) and bottom , weight attached with 100 mm strip complete all as specified and as directed. |
| 50 | Supply & fixing Aluminium powder coated glazed three track sliding window of frame 92 x 38x 1.5 mm thick and sliding shutter of section 40 x 18 mm x 1.5 mm including 4 mm thick sheet glass ordinary quality in two track shutters and in one track stainless steel wire cloth, .56 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainless steel staples including all fitting such as aluminium handle of size 100 mm and locking arrangements with each moving leaf aluminium jali, MS Grill with 30 mm x 5 mm flat iron Square bar @ 10 cm c/c complete all as specified and directed by the engineer in charge. |
| 51 | M&L for 1st class hard wood (Teak) Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed. |
| 52 | S&F 35 mm thick plain framed designer Pannelled shutter made of first class hard wood teak as stiles made out of single wood piece, timber piece tougned and glued to each other at joints, rendering door surface level to smooth and even, fixed to wooden frame with & including polishing of door as approved by Egnrs -in-charge complete all as specified and directed by Engr-in-Charge. |
| 53 | S&F Brass handles cast type Polished bright of 150 mm size. complete all as specified and directed by Engineer-in-Charge. |
| 54 | S&F Brass barrel tower bolts of extruded section of 200 mm length. complete all as specified and directed by Engineer-in-Charge |
| 55 | S&FBrass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixedlength of bolt 250 mm, bolts not less than 16mm dia with and including a minimum of 6 bolts not,four on bolt plate and two on staple plate complete (ISI marked ) , complete all as specified and directed by Engineer-in-Charge |
| 56 | M&L for 75mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) in sub base,flooring, pavings etc complete all as specified and as directed. |
| 57 | M&L for PCC 1:2:4, type B-0 using 12.5mm graded crushed stone aggregate as in coping, benching, complete all as specified & directed. |
| 58 | M&L RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in landings or in shelves and the like,complete all as specified and as directed. |
| 59 | M & L for formwork to soffits of suspended slabs such as shelves,landings ,cooking slabs and similar work; not exceeding 200mm thick (Horizontal or sloping) flat in fair finished surfaces on concrete ,complete all as specified and as directed. |
| 60 | M & L TMT bars 10 mm dia and cut to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 61 | M&L for providing and laying 60mm thick factorymade chamfered edge cement concrete paver block of M-35 grade conforming to IS: 15658:2006 with all amendments with approved colour design & pattern as in footparth, hape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper blocks into the sand bedding layer hrough vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all a specified and directed |
| 62 | Mirror polishing on marble/ Kota stone where ever required to give high gloss finish complete all as specified and directed. |
| 63 | M&L for 75 mm thick plain cement concrete 1:3:6 type C-2 , using 40 mm graded crushed stone aggregate as in floor, laid in slope of 1:12 and surface finished even and smooth without using extra cement including making joint at 2.5 m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand). Complete all as specified and directed. |
| 64 | Demolition fo stone slabs/ tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar and removing rubbish from the premises. Complete all as specified and directed. |
| 65 | M&L for 18-20 mm thick Granite stone slab machine cut( table rubbed and polished) in steps ,jambs,pillars,window cills ,cooking platform, laid over 10mm thick screed bed in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone including polishing complete all as specified. |
| 66 | M&L for First quality glazed ceramic coloured tiles of (450x350mm) x 7 mm thick, laid on vertical surfaces of wall such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles with & including dismantling of existing tiles of any description ,complete all as specified and directed by the Engineer in Charge. |
| 67 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing ),and removing rubbish off the premises , complete all as specified and directed by Engineer-in-Charge |
| 68 | M&L for First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles,with & including dismantling of existing tiles of any descriptioncomplete all as specified and directed by the Engineer in charge. |
| 69 | M&L for First quality, vitrified coloured tiles, 8 to 9 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sq.m but not exceeding 0.38 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles,with & including dismantling of existing tiles of any descriptioncomplete all as specified and directed by the Engineer in charge. |
| 70 | M&L Coloured Glazed Ceramic Tiles of size not less than 0.42 Sqm and thickness 8 to 9 mm thick in Vertical Surfaces i.e. Dado, set and jointed in Neat Cement Slurry and adhesive as approved pointed in white cement, laid over and including Screed 10mm thick in CM 1:4, complete all as specified and as directed. |
| 71 | M&L for machine cut polished kota stone slab flooring of size of Kotastone not less than 550 mm x 550 mm and 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 20mm thick screed bed in cement mortar 1:6, rubbing, grinding and polishing to achieve mirror finish, complete all as specified and directed. Note : Kota stone shall be laid in one piece for treads and risers for step, window cills and moulding/rounding of edge properly. |
| 72 | M&L for polished kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 10mm thick rendering in cement mortar 1:4, rubbing, grinding, rounding of edges and polishing to achieve mirror finish, complete all as specified and directed.Note : Kota stone shall be laid in one piesce for treads and risers for step, window cills and moulding/rounding of edge properly. |
| 73 | M&L for First quality, vitrified coloured tiles, 8 to 9 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sq.m but not exceeding 0.36]Sq.m, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles ,with & including dismantling of existing tiles of any descriptioncomplete all as specified and directed by the Engineer in Charge. |
| 74 | Taking down cement plaster on brick or concrete wall surfaces etc including raking out joints, hacking for key, scrubbing down with water and removing rubbish from the premises etc. complete all as specified and directed. |
| 75 | M&L for 12 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as on wall complete all as specified and directed. |
| 76 | Material and labour for 15 mm thick rendering in cement mortar 1:4 mixed with approved water proofing compound on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement all as specified and directed.Note: Water proofing compound shall be measured and paid separately. |
| 77 | M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of roof projection/ ceiling and surface finished even and smooth without using extra cement, complete all as specified and directed. |
| 78 | M&L for rough cast plaster with a mixture consisting of crushed stone or fine gravel aggregate of size 6mm to 8mm as directed, mixed with coarse sand, fine sand and cement in the ratio of 1:1:1, finished even rendereing with under coat 15mm thick cement and sand mortar 1:3 complete all as specified and directed |
| 79 | M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of oil emulsion distemper over 1.5 mm thick JK/Birla wall care putty to achieve smooth finish surface, complete all as specified and directed. |
| 80 | M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed. |
| 81 | M&L for prepration of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 82 | M&L for preparation of old plastered wall surfaces and applying two coats of oil emulsion distemper, complete all as specified and directed. |
| 83 | M&L for preparing old decorated walls and applying with textured interior paint of required shade (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of primer applied @ 2.20kg/10 sq), complete all as specified and as directed. |
| 84 | M&L for preparing old surfaces of walls by complete removal of existing treatment by sanding and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance interior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm with rollers.complete all as specified and as directed. |
| 85 | M&L for Preparation of old painted wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge. |
| 86 | M&L for Preparation of old painted steel surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge. |
| 87 | M&L for prepration of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. |
| 88 | M&L for Applying two coats of exterior acrylic emulsion (weather proof treatment ), in camouflaging pattern, over newly plastered surfaces over a coat of primer and 1.5 mm thick wall putty including preparation newly surfaces , complete all as specified and directed by Engineer-in-Charge. |
| 89 | M&L for preparation of old plastered surfaces of ceiling and applying one coat of white wash all as specified & directed by Engineer-in- Charge. |
| 90 | All as per srl item No 88 here in before but one coat on walls all as specified & directed by Engineer-in- Charge. |
| 91 | M&L Preparing New rough cast Plastered Surfaces of Walls applying Two Coats of Exterior Emulsion Paint (in Camouflage pattern) with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed by Engineer-in-Charge. NOTE: Rates quoted by the tenderer shall be deemed to be included with following application as under :-(a) The surfaces shall be cleaned to remove loose dirt or dust,lichen, algae, fungi or any organic growth by use of stiff brush, washed well and allow water to dry.(b) All cracks, voids and minor damages shall be patched/repaired prior to application of paint with white cement putty or with Plaster of Paris. |
| 92 | M&L for Complete Removal of existing Surfaces Treatment and applying Two Coats of Exterior Emulsion Paint (in Plain/New Camouflage pattern) with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed by Engineer-in-Charge.NOTE: Rates quoted by the tenderer are included with following apllication as under :- (a) The surfaces shall be cleaned to remove loose dirt or dust, lichen, algae, fungi or any organic growth by use of stiff brush, washed well and allow water to dry. (b) All cracks, voids and minor damages shall be patched/repaired prior to application of paint with white cement putty or with Plaster of Paris. |
| 93 | S&F in replacement vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and lush pipe). Complete all as specified and directed. |
| 94 | S&F in replacement, PVC valveless, dual type, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float , 32 mm dia PVC long bend flush pipe 90cm long, complete all as specified and directed. |
| 95 | Supply and fixing in replacement, wash hand basin vitreous china flat back 600 x 450 mm size white, first quality, with and including PVC waste coupling 32mm size, PVC waste pipe 32mm bore, brackets of Mild Steel angle iron (35mmx35mmx5mm) of suitable size including two coat of synthetic enamel paint over a coat of primer over angle iron brackets to walls complete all as specified and as directed. |
| 96 | S&F in replacement stainless steel sink with drainage board made of 1.00 mm thick sheet for kitchen or with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm with bowl size 410mm x330mmx200mm, with and including PVC waste pipe and CP waste coupling 32mm and making good to disturbed surfaces, complete all as specified and directed. |
| 97 | S&F in replacement Gun-metal, globe or gate valves of 20mm dia, with iron wheel head, screwed both ends for iron pipe, complete all as specified. |
| 98 | S&F in replacement PVC connection 15mm dia, 600mm long, hot water grade with brass chromium plated nuts and washers at both ends, complete all as specified. |
| 99 | S&F in replacement Brass chromium plated shower rose of 125mm size with or without swivel joints with arms suitable for 15mm bore pipe, complete all as specified. |
| 100 | S&F in replacement, 15mm bore, WHB/Sink mixer, fancy type, chromium plated, cast copper alloy, with capstan heads, screwed down, high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified. |
| 101 | S&F in replacement towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 102 | S&F in replacement fancy type Looking Mirror 5.0mm thick of size 1400x1200mm, fixed with Chromium Plated Brass Spacers 25mm to 30mm in size, complete all as specified and as directed. |
| 103 | S&F in replacement 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 104 | S&F in replacement Towel Rack 600mm long, Chromium Plated, without Lower Hangers but with 3 No. Hooks, complete all as specified and as directed. |
| 105 | S&F in replacement Stainless Steel Plate Rack 75x75x25 Cm in size, made out of Stainless Steel l.0mm thick with all Internal Fittings and fixing with Brass Chomium Plated Mild Steel Screws, complete all as specified and as directed. |
| 106 | Taking up or down PVC (SWR) Pipes any dia and bore (dia) with bends/ Connections, complete all as specified and as directed. |
| 107 | S&F PVC (SWR) pipes of 110 mm dia, single socket laid in floor fixed to wall with clamps. Complete all as specified and directed by Engr in Charge. |
| 108 | S&F PVC (SWR) pipes of 75 mm dia, single socket laid in floors fixed to wall with clamps . Complete all as specified and directed by Engr in Charge. |
| 109 | S&F PVC (SWR) Bend 110mm bore, any radius with Access Door, etc. jointing with Solvent Cement, complete all as specified and as directed. |
| 110 | S&F PVC (SWR) Bend 75mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement, complete all as specified and as directed. |
| 111 | S&F in replacement Stop Cock 15mm bore, Cast Copper alloy, Chromium Plated, Fancy type with long Shank and Cup (Concealed type), screwed down, high pressure, with Crutch, screwed both Ends for Iron Pipe or for Unions , complete all as specified and as directed. |
| 112 | S&F in replacement bib taps 15mm bore cast copper alloy chromium plated fancy type with round head, screwed down, screwed for iron pipe or for brass ferrule and Complete all as specified and directed by Engr in Charge. |
| 113 | S&F in replacement bib taps15mm bore , 2-in- 1 cast copper alloy chromium plated fancy type with round head, screwed down, screwed for iron pipe or for brass ferrule and Complete all as specified and directed by Engr in Charge. |
| 114 | S&F in replacement 15mm bore cast copper alloy, fancy type,chromium plated, two way angle valve cock (concealed type) ,complete all as specified and as direcetd. |
| 115 | S&F in replacement Angle Valve (concealed type) 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, screwed both Ends for Iron Pipe , complete all as specified and as directed. |
| 116 | S&F in replacement CP Fancy type Pillar cock 15mm bore cast copper alloy with capstan heads rocket type with areator fixed in repair. Complete all as specified and directed by Engr in Charge. |
| 117 | S&F in replacement Jet Spray with Connection Pipe 15mm bore (dia), Brass Chromium Plated and suitable for wash Down Water Closet Pan (Pedestal Pattern) , complete all as specified and as directed. |
| 118 | S&F in replacement vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union (fixing to trap and waste pipe) fixed, including urinal spreader , complete all as specified and as directed. |
| 119 | S&F in replacement vitreous China Urinal, Half stall type (White) , including providingand fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush/waste pipe, grating and Union for discharge pipe. (inclusive of fixing supply pipe to trap, waste pipe and urinal spreader) , complete all as specified and as directed. |
| 120 | S&F in replacement for fancy type ceramic counter sunk wash hand basin bowl shape of size 24 x 16 x 6 inch incuding 32 mm dia waste coupling , waste pipe ,wall flanges and connection pipes etc all necessary accessories, complete all as directed |
| 121 | S&F in replacement for European ceramic one piece water closet with soft close seat cover(floor mounted), size 680 x 365 x 705 mm, including dual flush siphon and all necessary accessories to make fully functional,complete all asspecified and as directed by engr in charge. |
| 122 | S&F in replacement viterous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern) and inlcuding flush pipe set of CP jet with PVC pipe of superior quality complete all as specified and directed. |
| 123 | S&F in replacement for vitreous china urinal partition white of size 310x700 mm.complete all as specified and as directed. |
| 124 | S&F as in replacement Health faucet mild steel chromimum plated auitale for 15mm dia pipe with 1.25m long long flexible tube ABS wall hook including making connections and fixed and complete all as specified. |
| 125 | S&F in replacement plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinging device, fixed in repairs all as specified and directed Engr-in-Charge. |
| 126 | S&F as in replacement Rotational moulded plythelene white water storage tank tripple layered white coloured, 1000 litres capacity (cylinderical vertical with cxlosed top) hoisted with thread tank cover and fixed in position including GI tank nipple & with union(two nos each), including 20mm for ball valve brass high pressure, with polythene float and fly nut complete all as specified and directed. |
| 127 | All as per srl item No 125 here in before but tank of capacity 500 Lt. complete all as specified and directed. |
| 128 | M&L for Galvanised iron tubing 15mm bore,medium grade,with all fittings fixed to walls or ceiling or laid in floors, in concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe,incuding taking down of old rusted/u/s GI pipe removal from site. complete all as specified and directed.(Rates for cutting of chases is included in respective items of taking down).complete all as specified and directed |
| 129 | M&L for Galvanised iron tubing 20mm bore,medium grade,with all fittings fixed to walls or ceiling or laid in floors, in concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe,incuding taking down of old rusted/u/s GI pipe removal from site, complete all as specified and directed.(Rates for cutting of chases is included in respective items of taking down).complete all as specified and directed |
| 130 | Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipe etc for any capacity ltrs capacity of tanks and removing rubbish from the premises as directed by eningeer -in-charge. (Note: Date of cleaning to be written on the tank after cleaning) |
| 131 | Dismantling for Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified. |
| 132 | S&F Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in roof covering/cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructionscomplete all as specified and directed. |
| 133 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness with grid of any type and pattern including cover fillets and removing from site complete all as specified and directed by engr-in Charge. |
| 134 | Dismantling mild steel work of any driscription and any position complete all as specified. |
| 135 | M&L rolled mild steel for as in framing fro cladding, glazing and the like fixed with angle cleats and connecting plates conforming to Fe410-W (Gde-E-250) quality-A all as specified and directed by Engr-in- charge |
| 136 | M&L 12 mm thick suspended Gypsum cove coffered false ceiling (as in ceiling/lining )fixed with counter sunk screws on & including GI channels frame work of standard section and wire mesh as per manufacturers instruction , fixed @ 1.2m in one direction and 45cm in C/C in other direction with necessary fixing arrangement at their junction point at desired heights below roof slab and including two coats of plastic emulsion paint over a coat of primer on exposed surfaces, the frame work shall be fixed with the help of GI suspenders of suitable size with the help dash fasteners and along wall, making good disturbed surfaces smoothening the gypsum board, POP lining at joints panning as required ,complete all as specified and as directed. |
| 137 | S&F for 1.5 mm thick wood grain finish colour PVC sheet fixed on walls with nails/screws/pasting at site as per specification including covering cross sectional surface/ thickness with borders ,complete all as specified and directed. |
| 138 | Supply only Integral waterproofing compound.complete all as specified and directed |
| 139 | Hacking out old broken glass of any thickness , size and description n exc 0.50 sqm in each pan metal frame glazing with oil putty or fixed with beadings etc.complete all as specified and directed . |
| 140 | S & F as in replacement 12 mm toughned glass as in hinged doors/ partitions/ automatic doors and similar works including cutting to shape drilling holes required complete all as specified and directed. |
| 141 | M & L as in replacement 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each panes as specified |
| 142 | M&L Solar control film 25 micron reflective type (gareware sun control or equivalent complete all as specified. |
| 143 | M&L for cement concrete 1:2:4 type B2 by using 40 mm graded cushed stone aggregate in surface channels and drains etc, complete all as specified and directed. |
| 144 | M&L Cement Concrete 1:2:4 (20mm graded stone aggregate), 75mm thick in Path/ Hardstanding in alternate Bay/Panel, finishing Cement Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed. |
| 145 | M&L PU polished/Glazed finished Chequered cement concrete coloured (terracota Red or yellow ) tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors and pointed in grey cement, laid over and including 20mm thick Screed Bed in CM 1:4, complete all as specified and directed by Engineer-in-Charge. |
| 146 | S&F in replacement Shower Rose 200X200mm in size, Brass Chromium Plated, Fancy type with Swivel Joints including Flange and suitable for fixing Steel Pipe 15mm bore (dia) or Union, complete all as specified and as directed. |
| 147 | Providing and fixing factory made uPVC any colour fixed window casement (openable) area exc 1.00 sqm but not exce 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass, including taking down of the same ,complete all as specified as as directed. Note: (i) The unit rate quoted by contractor includes cost of glass and all other connected accessories, nothing shall be paid extra (ii) For measurement purpose Net opening will be measured for payment purpose.) |
| 148 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge |
| 149 | Supply and fixing factory made uPVC any colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality ,including taking down of the same, complete all as specified and directed by Engineer-in Charge. |
| 150 | Note: (i) The unit rate quoted by contractor includes cost of glass and all other connected accessories, nothing shall be paid extra (ii) For measurement purpose Net opening will be measured for payment purpose.) |
| 151 | S&F 100mm long Butt hinges, extruded brass, with mild steel hinge pin, bright polishedand fixed, type B-11 , complete all as specified and as directed. |
| 152 | Preparing wood surafces for french polishing on surfaces of any description, width or girth including grinding & Buffing with sand paper, cleaning after and before primer ,a coat of wood filler ,applying a coat of primer and one or more coats of polish on new wood surfaces rendering the surface shining & smooth , complete all as specified and as directed. |
| 153 | Factory made single extruded WPC (Wood Polymer omposite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 154 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt inges and necessary S S screws shall be paid separately) |
| 155 | M&L 4-5 mm thick designer/plain PVC sheet ceiling tiles on GI powder coated channel/Tee/Grid (sillhouette type ) frame work with the following specification, cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type BO/Cement mortar 1:3 complete all as specified and directed with following:-(a) M&L Plugging to wall around the rooms & supplying & fixing GI powder coated angle ,Main T and cross T of size 25x40 ,25x 25 & 25X 25 mm and of thickess 0.30 mm atleast. (b) S&F of 2.00 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling including dash free fasteners.(c) S&F GI powder coated tee as in main & cross members at 595mm centre to centre to centre supported suspenders along with adjustable clamp to maintain level.(d) S&F ceiling board (Make-Rajshree or equivalent) ceiling tiles of size 595mmx595mm and 4-5 mm thickness, confirming to relevant IS codes in squares of GI powder coated tee with clips made to shape, shade and pattern of PVC board shall be as approved by GE. |
| 156 | S&F for soffit/Louver boarding wood grain finish (thickness 8-10) mm colour PvC sheet fixed on walls with nails/screws/pasting at site as per specification including covering cross sectional surface/ thickness with borders ,complete all as specified and directed. |
| 157 | M&L for wood finish solid charcoal louver for wall pannels of thickness 10-12 mm , decorative type inclusive of solvent cement and fixing at site as per specifications complete all as specified and directed. |
| 158 | Supply and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 159 | Resecuring,easing or adjusting without/with taking down door/ windows shutters for easy operation, tightning hinges, adjusting position of hinges,tower bolts opening out joints, taking out glass or panels of any description, replacing the corner piece wherever required, joining and assembling again, refixing the glass pane and panels by provision of new rubber neoprene packing etc including provision of necessary screws complete all as specified and directed |
| 160 | Supply and fixed as in replacement of 40 mm thick PUF (Polyurethane Foam) insulated sandwich panel, having FRP (Fibre Reinforced Plastic) sheet facings on both sides (fixed on roof or wall) , including all necessary cutting, fitting, jointing and fixing with suitable screws/fasteners, washers, sealant and all required accessories, complete in all respects as required and directed by the Engineer-in-Charge. |
| 161 | Supply and fixed as in replacement of 50 mm thick PUF (Polyurethane Foam) insulated sandwich panel, having pr painted galvalume sheet facings on both sides (fixed on wall or roof), including all necessary cutting, fitting, jointing and fixing with suitable screws/fasteners, washers, sealant and all required accessories, complete in all respects as required and directed by the Engineer-in-Charge. |
| 162 | Dismantling old MS/Steel rolling shutter of any size any position complete all as specified and directed by Engg-in-Chrage. |
| 163 | M&L steel rolling shutters thickness of lath 1.25 mm, with out ball bearing, including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, push pull or manual type , Including all parts as per IS code 6248-1979 , complete all as specified and directed by Engineer-in Charge. |
| 164 | S&F steel rolling shutters,thickness of leath 1.25 mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, gear operated type with bevel gear box and crankhandle , Including all parts as per IS code 6248-1979 , complete all as specified and directed by Engineer-in Charge. |
| 165 | S&F as in replacement Safety levers lock Mild Steel with 4 levers for Rolling Shutters complete all as specified and directede by Engr-in-Chrage. |
| 166 | S&F as in repacement Ball bearing for rolling shutters complete all as specified and directede by Engr-in-Chrage. |
| 167 | S&F as in replacement for curtain built up of interlocking lath section of thickness not less than 1 mm formed from cold-rolled steel: strips. securely riveted at either end, thus locking the lath ‘section at both ends and preventing lateral movement of the individual lath sections. The clips shall be so designed as to fit the contour of the lath sections,complete all as specified and as directed. |
| 168 | S&F as in replacement springs size 600mm x 125 mm used in the roller for counter balancing the rolling shutter made either from high tensile spring steel wire or flat spring steel strip. Complete all as specified and directed. |
| 169 | S&F as in replacement for springs of size 450x 125 mm' used in the roller for counter balancing the rolling shutter made either from high tensile spring steel wire or flat spring steel strip. Complete all as specified and directed. |
| 170 | S&F as in replacement springs of size 400mm x 125 mm' used in the roller for counter balancing the rolling shutter made either from high tensile spring steel wire or flat spring steel strip. Complete all as specified and directed. |
| 171 | Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of neck of bolt 12 mm but not exceeding 20 mm and length of bolts exc. 5 cm but not exc. 15 cm, fixed complete all as specified and directed by Engineer-in-Charge. |
| 172 | M&L for Plain MS plates(Fe 410-W(Gde-E- 250)quality-A including necceassry fixing, welding and bevelling & drilling of edges as required cutting as per the existing shape / design as per sample, complete all as specified and directed by Engineer-in-Charge. |
| 173 | M&L Running Welding Thickness of Metal to be welded exc. 6.0mm but not exc. 9mm and not exc. 2.5 Cm in Length for Steel Gate, Windows, Fencing Post, etc. complete all as specified and as directed. |
| 174 | M&L for greasing/oiling,easing adjusting and servicing as required to make the sliding for Rolling shutter hand operated/gear operated any size and any type ,complete all as specified and directed by Engineer-in-Charge. |
| 175 | Supply & fixing as in replacement vitreous china premium/1st quality wash down water closet wall hung EWC of colour as directed (closed pattern incl all necessary accessories like rag bolts/gel gasket etc with & including WC seat cover closed pattern syphonic action type twin flush flushing cistern of 10 litre capacity with lid , incl CP jet spray and Health faucets of made of stainless steel connected for EWC necessary fitting and also incl Angle Stop valves 15 mm bore fancy type, CP, cast copper alloy. |
| 176 | \\"M&L as in replacement brass chromium plated bottle trap with 32mm dia discharge pipe having minimum water seal or 25mm for wash basin with inlet and outlet screwed for pipe or connections including necessary packing , union and cap complete all as specified & directed by Engineer-in-charge. |
| 177 | Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary of tender documents. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 06, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Nov 13, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender