Tender For Provn Of Inside Road At Gta And special Repair To Roads In Arty Bde At Naa Under Ge (N) Tezpur
Tender Value
52.50 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
18 days left
EMD
1.03 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Inside Road At Gta And special Repair To Roads In Arty Bde At Naa Under Ge (N) Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil, all as specified and directed. |
| 2 | M&L for forming embankment with approved earth obtained from outside of MoD land, including raising (or lowering) earth, spreading in layers n. exc. 30 cm thick, watering, ramming/rolling and finishing to required size, shape, etc. n. exc. 1.5m high from base complete in all respect as specified and directed. |
| 3 | Removing excavated material exceeding 500 m but n. exc. 1.5 km and depositing where directed. |
| 4 | Rolling and consolidating formation surfaces in cutting using power roller 8–12 tonne power road roller complete in all respect as specified and directed.. |
| 5 | Laying and compacting 150 mm thick (compacted thickness) Granular Sub Base Course (GSB), grading as per Grade IV, as specified Table 400-1 of MORTH Specifications for Road and Bridge Works, 2013, in a single layer over compacted subgrade with natural sand, crushed gravel , crushed stone, crushed slag or combination thereof as per the grading required. The materials are mechanically mixed, spread and levelling on the subgrade by using motor grader of adequate capacity and rolling with vibratory roller of capacity 80-1 00 KN static weight for achieving required compaction density of atleast 98% of the Maximum Dry Density. Consolidating to required gradient and camber complete all as specified and directed with finished surface tolerances as per Table 900-1 of MORTH sppecifications for Road and Bridge works 2013. |
| 6 | Laying and compacting 150 mm thick (compacted thickness) Wet Mix Macadam (WMM), grading as per Table 400-13 of MORTH Specifications for Road and Bridge Works, 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with waste to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-1 OOKN static weight and consolidating to required gradient and camber complete all as specified and directed. The finished surface tolerances to be as per Table 900-1 of MORTH specifications for Road and Bridge works, 2013 |
| 7 | Preparing unsurfaced WMM by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed. |
| 8 | M&L for applying evenly a priming/tack coat with catonic bitumen emulsion RS-1 confirm to IS:8887 @ 7.5 Kg per 10 Sqm on surface of WBM as specified in table 500-3 of MORTH using mechanical sprayer on WBM surfaces and black top surfaces complete all as specified and directed Please Enable Macros to View BoQ information |
| 9 | M&L for applying evenly a priming/tack coat with catonic bitumen emulsion RS-1 confirm to IS:8887 @ 7.5 Kg per 10 Sqm on surface of WBM as specified in table 500-3 of MORTH using mechanical sprayer on WBM surfaces and black top surfaces complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender