Tender For Special Repair (Sr) Work Over The Damage Surface In Stretches Between Km 317.00 To Km 320.00 Of Nh-14 (Nh-60) Under P.W. (Roads) Dte. In The District Of Birbhum, West Bengal. During The Year 2026-27 (Job No. Nh-419/Wb/2026-27/Sr-02)
Tender Value
38.69 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
0 days left
EMD
77000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Birbhum → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair (Sr) Work Over The Damage Surface In Stretches Between Km 317.00 To Km 320.00 Of Nh-14 (Nh-60) Under P.W. (Roads) Dte. In The District Of Birbhum, West Bengal. During The Year 2026-27 (Job No. Nh-419/Wb/2026-27/Sr-02)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Oct-2026 | 1st Corrigendum | Technical Bid | 29-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate conforming to the grading of table 400- 13 revised vide table 2 of IRC : 109 (2015) to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density .The thickness of a single compacted layer shall not be less than 75 mm.(Reference to MoRT&H's specification 406. |
| 2 | Prime Coat:- Providing and applying primer coat with cationic bitumen emulsion SS grade conforming to IS:8887 on prepared porous granular surface including clearing of road surface and spraying primer using mechanical means (Reference to MORT&H's specification clause 502). On WMM/WBM surface @ 0.70-1.0kg /sqm. |
| 3 | Tack Coat:- Providing and applying tack coat with Cationic bitumen emulsion (RS) complying with IS:8887 using emulsion pressure distributoron the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (ReferencetoMORT&H'sspecification clause 503). i) On bituminous surface @ 0.20kg-0.3kg /sqm. |
| 4 | Dense Graded Bituminous MacadamProviding and laying dense graded bituminous macadam with 100-120 TPH batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder of approved grade @ 4.0% (min) for Grading-1 and 4.5% (min) for Grading-2 by weight of total mix and filler (Cement /hydrated lime /Rockdust)as per table 500-10 and mix design done as per table 500-1 1 and job mix formula as per clause 505.3.3 transporting the hot mix to work site,laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory tandem roller and with pneumatic tyre roller of 12 to 15 tonne weight with a pressure at least 0.56MPa as directed by E-I-C, and to achieve the desired compaction as per MORT&H specification clause No.505.3.5 complete in all respects(Reference to MORT&H's specification clause 505).(ii) For Grading 2 (26.5 mm nominal maximum aggregate size ) Layer Thickness 50-75mm |
| 5 | Bituminous Concrete Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of approved grade@ 5.2% (min) for Gr.-1 & @ 5.4% (min) for Gr.-2 , as per table 500-17, and mix design done as per table 500-10 and job mix formula as per cl. 505.3.3 and filler(Cement /hydrated lime / Rock dust ), transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory tandem roller and with pneumatic tyre roller of 12 to 15 tonne weight with a pressure at least 0.56 MPa as directed by E-I-C to achieve the desired compaction as per clause no 507.3.5 complete in all respects ref. to MORTH specification clause No.507. for Grading-2 (13.2 mm nominal maximum aggregate size), Layer thickness:30mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender