Tender For Providing Of 02 X Qm Stores Shed Alongwith Toilet At Klp Loc, Wadgoan Sheri, Pune Of Hq 41 Arty Div
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Nov 2026
6 days left
EMD
83500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of 02 X Qm Stores Shed Alongwith Toilet At Klp Loc, Wadgoan Sheri, Pune Of Hq 41 Arty Div
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Oct-2026 | Corrigendum | BOQ | 29-Oct-2026 |
| 2 | 29-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface Excavation n.exc 15cm deep in soft/loose soil all as specified and directed |
| 2 | M & L for Earthwork in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), in all kinds of soil including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m., as directed by Engineer-in-charge. |
| 3 | M & L for Plain Cement concrete 1:4:8 Type D2 (40mm graded aggregates) in foundations, filling and mass concreteall as specified and directed |
| 4 | M&L for RCC M-25 (design mix) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete all as specified and directed |
| 5 | M&L for RCC M-25(design mix) as in Columns, pillars, piers, posts and struts all as specified and directed |
| 6 | M&L for RCC M-25 grade (design mix) in Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed. |
| 7 | M&L for Reinforced cement concrete (design mix) in M-25 20mm graded stone aggregates in roof Slab supported in walls beams and columns in roof ,Landing, balconies, deck slabs and in shelves and similar work complete all as specified and as directed. |
| 8 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batterall as specified and directed |
| 9 | Formwork to sides of pillars, posts, struts, piers, columns, and stanchions all as specified and directed |
| 10 | Formwork to sides and soffits of floor or roof beams, lintels, etc for fair finished, flat surfaces of concrete complete all as specified and directed |
| 11 | M&L for Formwork to soffits of suspedded slabs such as roof slabs, floor slabs landings and similar work ,vertical or to batter for rough finished flat surfaces of concrete complete. |
| 12 | M&L for TMT bars 8mm dia as in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,beams etc hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 13 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, slabs, beams ,footing etc hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed |
| 14 | M&L for Returning filling in including spreading, levelling watering and well ramming in layers not exc 25 cm all as specified and directed |
| 15 | M&L for Removing excavated soil not exceeding 50 m and depositing where directed at a level n exc. 1.5 m all as specified and directed |
| 16 | M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in c.m 1:6 all as specified and directed by engineer-in-charge. |
| 17 | M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, in half brick thick walls built in c.m 1:4 all as specified and directed by engineer-in-charge. |
| 18 | M&L preparation of new plastered surfaces of wall applying two coats of Acrylic washable distember(Asian Tractor UNO or equivalent) over one coat of acrylic wall care putty of 1 mm thickness over one coat of trucare internal wall primer complete all as specified and as directed. |
| 19 | M&L preperation of new plastered surfaces and applying two coats of weather proof exterior emulsion paint (apex Ultima or equivalent) with approved colour and pattern over a coat of primer as on walls of Bldgs of any height including necessary scaffolding and safety measures and procedure complete all as specified and directed. |
| 20 | Supply only Integrated water proofing compound. |
| 21 | M&L machine cut mirror polished kota stone slab flooring 20-25mm thick in flooring but one piece as in treads of straircase etc over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing moulding complete, over 15 mm thick screed bed or bedding in CM 1:4 for laying floor finishes, all as specified and directed. |
| 22 | M&L for thick Hard Core of broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface all as specified and directed . |
| 23 | M&L for PCC 1:4:8 Type D2 using 40mm graded stone aggregates as in sub base of the floor of 75mm thick all as specified and directed. |
| 24 | M&L for 75 mm thick PCC 1:3:6, type C1 as in Plinth Protection surfaces finished even and smooth withoput using extra cement incl necessarey form work. |
| 25 | M&L for forming Contraction (Dummy) joints 50mm deep x 10mm wide, filled with sealing compound Grade 'B'. |
| 26 | S&F 30mm thick Plain, framed, Factory made panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats all as specified and directed |
| 27 | S & F 35mm thick factory made IInd class hard wood glazed and skelton door shutters ( two pannel) open rebated and prepared to receive glass/wire gauze etc, (without sash bars) edges offraming plain chamfered or rounded fitted with cut and mitred beads for receving glass etc sizes of members ofshutters as specified in SSR Part -Isection 8, clause 8.20 (a) supplied and fitted to chowkats all as specified and directed. |
| 28 | S &F Pressed steel frame for doors of size 125x 60mm made out of 1.25mm steel sheet, with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed. |
| 29 | M&L for cement concrete 1:3:6 type C-0 using 20mm graded aggregate for filling in pressed steel door frames. |
| 30 | S&F Butt hinges, 100mm size medium weight cold rolled mild steel Etc., |
| 31 | S&F Aluminium anodised barrel tower bolts of extruded section 150mm long all as specified. |
| 32 | S&F aluminium handles cast type anodised 125 mm size. |
| 33 | S& F aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified and as directed. |
| 34 | S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded |
| 35 | S&F in stainless steel wire cloth , 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples. |
| 36 | S&F sheet glass 4mm thick plain ordinary quality and glazing with oil putty/wooden beads as directed in squares n.exc 0.50 sqm each pane. |
| 37 | M&L for applying two coats of Synthetic enamel paint for wooden surfaces over a coat of pink primer including necessary preparation of new wooden surfaces of any description exc. 10cm width or girth. |
| 38 | M&L for applying roof treatment as under :- (i) Providing 10mm thick (average) rendering in cement mortar 1:3 mixed with WPC as per manufacturer's instruction (to be measured separately as supply only) for levelling to a true surface and to receive new roof treatment complete. (ii) Providing a coat of bitumen primer @ 0.40 Litre/Sqm over plastered surfaces of roof including parapet surfaces. (iii) Providing one layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm, reinforced with polyester non woven fabric (weighing not less than 150 Gms/Sqm). Polymeric membrane shall be taken to a height 60cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (Note:(a) Laying of APP based polymeric membrane shall be done by torch application method or as per manufacturar's instruction. (b) Side overlaps shall be minimum 75mm and end laps shall be minimum 100mm and sealing all overlaps and joints as manufacturer's instructions. (c) The make of polymeric membrane shall be as per PS Specification of CA. (iv) Applying two coats of bituminous aluminium paint on top of APP membrane. |
| 39 | M&L applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer including preparation of new steel or iron surfaces nexc 10 cm width or girth, complete all as specified and directed. |
| 40 | M&L rendering 15 mm thick (10mm + 5mm) plaster on fair face of brick work in CM 1:4 mixed with water proofing compound and finished even and smooth all as directed. (Note :-WPC shall be measured & paid seprately) |
| 41 | M & L for 10 mm thick plastering on fair faces of brickwork,or concrete surface in CM 1:6 with finishing the surface even and smooth(without using extra cement) complete all as specified and directed by Engr-in-Charge. |
| 42 | M&L for rendering 5mm thick in cement mortar 1:3 on ceiling surface, finished even and smooth without using extra cement complete. |
| 43 | M & L Precast cement concrete block masonry type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10cm in width and, setting in cement mortar 1:6 complete all as Specified. |
| 44 | M & L for PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate), as in lintels upto 1.5 m clear span, cills, steps,seismic and other similar bands, plinth course, string courses, lacinng courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 45 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering |
| 46 | M & L for Non Skid Ceramic tiles, Coloured, of size exceeding 0.06 Sqm and not exceeding 0.11 Sqm,7 to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed. |
| 47 | M & L for Glazed Ceramic Coloured tiles of size 300mmX600mmX7mm as in Vertical Surfaces such as Skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat of 10mm thick in cement mortar 1:4 in complete all as specified and as directed. |
| 48 | S&F aluminium louvered ventilators of section size 100mmx25mmx1.50mm including frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. including taking down existing steel ventilator incl taking down ol ventilator all as directed by Engr-in-Charge. |
| 49 | M&L for Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER - WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M.S. frame shall have a coat of steel primers. The inner panel shall consist of 25m thick EPS of Density 23 Kg / Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC sheet manufactured by an ISO-9001-2015 certified company, with 2,4,6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and / or prelam PVC sheet on other side of EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton (made by sticking 2mm rigid foam PVC sheets of 5mm (+0.25) thickness using PVC solvent cement) and stile sides 25mm (5mm x 5Nos) thick and 30mm width PVC sheet fitted along M.S tube for hardware provision & for lock 25mm thick (5mm x 5Nos). PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc complete all as per specification & drawing and as directed by Engineer-in-Charge. |
| 50 | S & F Aluminium anodised barrel tower Bolt of size 150 mm size of extruded section complete all as specified and as directed. |
| 51 | S & F Aluminium cast type anodised Handle, size 150mm long complete all as specified and as directed. |
| 52 | S & F 100 mm size, heavy weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed. |
| 53 | S & F Aluminum aodised sliding door bolts, bearing ISI mark, 300mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 54 | S&F 20mm bore GI tubes, medium grade, galvanised , with all fitting & fixed complete to walls & ceilings or laid in floors all as specified and as directed |
| 55 | S & F 15 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors, all as specified and as directed [The rate is deemed to be included for concealing of GI tubes wherever required and directed]. |
| 56 | S&F for looking mirror of any size n.exc 2.00 sqm & 5mm thick mirror of selected quality glass,,mounted on 6mm thick commercial plywood and bevelled edge fixed on wall with six nos. stainless steel studs decorative type complete all as specified and as directed by the Engineer-in-Charge (make Modi Guard/Saint Globin and eql. ) |
| 57 | S&F fancy type two way Bib cock 15mm dia , fancy type, chromium plated with capstan or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and suitable for 15 bore of pipe fixed all as specified and directed (Make :Jaquar/Hindware/Cera/Prayag or equivalent). |
| 58 | S & F for fancy type CP brass angular stop cock 15 mm dia all as per directed (Make :Jaquar/Hindware/Cera/Prayag or equivalent). |
| 59 | S & F PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts, complete all as specified and directed. |
| 60 | S&F fancy type heavy duty health faucet chromium plated (ABS Body) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook fixing to 15 mm bore of pipe all as specified and directed.(Make :Jaquar/Hindware/Cera/Prayag or equivalent). |
| 61 | S&F CP grating ring or frame square or round 100mm size complete all as specified and directed. |
| 62 | S&F of EWC of size 62.5x36x76 cm of one piece,including trap ,flush tank, seat cover & other necessary items, fixed in repairs, complete all as specified. |
| 63 | S&F Vitreous china wash hand basin (550X400mm) white with pedestal , flat back excluding taps but including brackets & CP waste coupling 32mm, LDPE waste pipe 32mm upto floor complete all as specifed and directed. |
| 64 | S&F Vitreous china Urinal half stall type white, with grating and union for discharge pipe fixed icluding all reqd necessary fittings as instructions of manufacturers, bottal trap , fixing to existing wall complete all as specified.Make : Jaquar/ Cera/Hindware/ Parryware or equivalent. |
| 65 | S&F PVC (SWR) pipes 75mm dia ,single socketed in any length with rubber ring joints laid in trenches or floor & wall complete all as directed. |
| 66 | S&F PVC (SWR) pipes 110 mm dia ,single socketed in any length with rubber ring joints fixed and laid in trenches or floor/ceiling and wall all as directed. |
| 67 | S&F 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified. |
| 68 | S&F PVC (SWR) bends any radius, 75mm dia pipe. |
| 69 | S&F PVC (SWR) branch piece 110 mm bore, single Y equal or unequal all as specified and directed. |
| 70 | S&F PVC (SWR) junction 110mm bore single T equal or unequal all as specified and directed. |
| 71 | S&F for towel ring chromium plated brass fancy type complete all as specified and as directed by the Engineer-in-Charge. (Make :Jaquar/Hindware/Cera/Prayag or equivalent). |
| 72 | S/F for sheet glass shelf assembly consisting of 5.5 mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long all as specified and directed. |
| 73 | S & F Rotational moulded Polythene [HDPE] Water Tanks, Cylindrical & Vertical Type 500 Liters Capacity double layered 'ISI' marked, hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes complete icomplete all as specified and as directed. |
| 74 | S&F 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) |
| 75 | Excavation in trenches not exceeding 1.50m wide and 1.50m depth for foundation, etc., for Shaft wells, Manholes etc not exceeding 10sqm on plan and not exceeding 1.50m in depth and getting out in soft / loose soil all as specified and directed. |
| 76 | Returning filling in including spreading leveling watering well ramming in layers not exceeding 25cm thick with soil obtained from excavation all as directed. |
| 77 | Removing excavated surplus soil not exceeding 50m and depositing where directed at a level exceeding 1.5m above the starting point all as directed. |
| 78 | M&L for PCC M-7.5 grade nominal mix using 40 mm graded stone aggregate as in concrete bed to drain pipes including packing under and haunching against sides of pipes with concrete after they are laid and bedded dia of pipe 150mm all as specified and directed. |
| 79 | M&L for 150mm dia RCC drain pipes class NP2 laid in trenches and jointed with in cement mortar all as specified. |
| 80 | Excavation in trenches in soft/ loose soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cables etc and getting out all as specified and directed at site. |
| 81 | Supply, laying in trenches and jointing Galvanised steel water tubings,medium grade ISI Marked conforming to IS -1239, in any length with screwed and socket joints,together with and including galvanised steel fittings such as socket ,elbow bends, Tees reducers, unions caps plugs nipples, Short pieces etc for 25 mm Dia bore Pipe all as specified and Directed. |
| 82 | Supply and Fix stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for iron pipe dia 25 mm as per requirement of the site complete all as specified and directed. |
| 83 | Cutting, Drilling and tapping existing CI/ GI pipe of 63/ 90 mm dia for insertion of elbow, bend, socket, tees, reducers, branch connection bore in pipes of 40 mm as per requirement of the site complete all as specified and directed. |
| 84 | Excavation in trenches in Hard/ Dense soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cables etc and getting out all as specified and directed at site. |
| 85 | Material and labour riddle earth cushning for underground cable in trenches including spreading, levelling and well ramming complete all as specified and directed. |
| 86 | Supply and laying un-rinforced precast concrete cable cover ,class LV,Type 1,flat of size 250 mm x150 mm x40 mm all as specified and directed. |
| 87 | Supply & lay pipes galvanised \\"Light grade\\" size 50 mm bore supplied and laid complete including fitting complete all as specified and directed |
| 88 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 core |
| 89 | M& L for road cutting / foot path and making good with PCC 1:3:6 TYPE C-2 (using 40 mm graded stone aggregate ) of 150 mm all as specified and directed. |
| 90 | M & L for point wiring complete with and including 1.5 sqmm (nominal area) single core multi stranded copper conductor PVC insulated but unsheathed FRLS cable 1100 Volts drawn into PVC concealed conduit medium grade including its accessories such as tees, bends ,elbows, socket and chisselling on wall complete and also making good the disturbed surfaces of wall/ ceiling by cement mortar 1:4 including painting to existing surfaces and also including 1.5 sqmm PVC insulated and PVC unsheathed single core multistranded copper conductor FRLS cable 1100 V grade as earth wire including concealed GI box of suitable size with modular cover plate for housing switch ,socket,regulators etc complete for the following:- |
| 91 | One light point controlled by one switch |
| 92 | One Exhaust Fan/ Ceiling fan point controlled by one switch |
| 93 | One socket outlet 3 pin 5 amps same board |
| 94 | One socket outlet 3 pin 5 amps Independent board |
| 95 | All as per item No 1 here-in-before but wiring with 2.5 sqmm single core multi stranded copper conductor,FRLS 1100 V grade PVC insulated but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm cable as earthwire complete all as specified and directed. |
| 96 | S & F for Modular Switch, 1 module single pole one way, and 6 amp complete ISI mark complete all as specified and directed by Engr-in-Charge. |
| 97 | S & F Switch 16 Amps Modular one Way all as specified and directed by engr- in- charge. |
| 98 | S & F socket 6A/16 Amps Modular Flush type, all as specified and directed by engr- in- charge. |
| 99 | S & F for Modular Socket, 2 module single pole one way, and 6 amp complete ISI mark complete all as specified and directed by Engr-in-Charge. |
| 100 | S & F stepped type modular fan regulator, capacity 120 w - 2 module suitable for 1200/1400 mm ceiling fan all as specified and directed by Engr-in-Charge. |
| 101 | Supply and fix ceiling rose surface bakelite with three terminals 2 Amp,240 Volt AC complete all as specified and directed. |
| 102 | S & F for sheet metal enclosure MCB SPN DB 8 Way with 200 Amps rated copper bus bar 240 volts 50 Hz AC Supply Double door with magnetic locking system complete all as specified and as directed. |
| 103 | Supply and fixing miniature circuit breaker (MCB) of single poles, current carrying capacity 5 to 32 Amps,AC, 240V, 10 KA 'B' curve in the MCB DB Complete with connection testing and commissioning. |
| 104 | Ditto same as item no 12 but SPN 32 Amps . |
| 105 | Ditto same as item no 12 but TPN 40-63 Amps . |
| 106 | M&L for sub main wiring with two single core multistranded PVC insulated copper conductor FRLS Cable of size 2.5 sqmm 1100 volt grade drawn into PVC conduit of size 20 mm dia including 2.5 sqmm PVC multi standard copper conductor FRLS cable in green colour for continious earthing complete all as specified and directed by Engr-in-Charge..Note: Two core cable and earth wire and conduit shall be measured one length as one running mtr. |
| 107 | Supply and fixing LED lights fitting 1x 22 W, 220V,AC, decorative box type with driver, holder incl LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.Make :- Jaquar/Halonix/Philips or equevalent. |
| 108 | S&F fix high efficent LEDbuilding security light 45 watt , 230 V , lumen 2000 -3000, PF> 0.9, THD less 10%, made of pressutre cast aluminuim housing with high power LEDs, lens and touughned glass IP 66 connecting with three core flexible copper wire from connected to ceiling rose MAke Halonix ,Bajaj,Havells or equivalent make, |
| 109 | Supply & fixing ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). |
| 110 | Supply and fix Exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, frame and louvers complete with ISI mark all as specified and directed by Engr-in-Charge. |
| 111 | Supply and fix Exhaust fan, steel body AC single Phase. 230V of size 380 mm sweep with, blades, frame and louvers complete with ISI mark all as specified and directed by Engr-in-Charge. |
| 112 | Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Nov 05, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender