Tender For Addition/Alteration To Bldg No P-81 , Provn Of Flame Proof Ac And Certain Sanctioned Works At Af Stn Kanheri Hills Under Ge(Af)Thane
Tender Value
30.97 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
4 days left
EMD
61940
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thane → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Bldg No P-81 , Provn Of Flame Proof Ac And Certain Sanctioned Works At Af Stn Kanheri Hills Under Ge(Af)Thane
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Oct-2026 | REVISED BOQ | BOQ | 27-Oct-2026 |
| 2 | 27-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling boarding, any description,, fixed in any position with screws complete all as specified and as directed by Engineer in charge |
| 2 | S&F factory made PVC cupboard shutters of 18mm thick wood grain (Prelam Rigidlam rainbow colour- Single Side) perfect finish to the shutters and jointed together with solvent cement adhesive incl 18mm x1mm PVC edge lipping is done on all side of shutters using PVC solvent cement adhesive etc complete all as diected by Engr-in-Charge and as per manufecturers specification and instruction. |
| 3 | S&F factory made PVC cupboard Shelfs of 25mm thick wood grain (Prelam Rigidlam rainbow colour- Single Side) perfect finish to the Shelfs and jointed together with solvent cement adhesive incl 25mm x1mm PVC edge lipping is done on all side of shutters using PVC solvent cement adhesive etc complete all as diected by Engr-in-Charge and as per manufecturers specification and instruction. |
| 4 | S&F 100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified and directed |
| 5 | S & F Continuous (piano) hinges, mild steel, bright finish or electro galvanised Width of flaps (when open) in 15-18 mm complete all as specified and directed |
| 6 | S&F extruded aluninum alloy handles, fabricated type anodized 100mm long fixed all as directed |
| 7 | Material & labour for Glazed ceramic coloured tiles in vertical surfaces 350x250X7/ 350x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 10 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces complete all as specified and directed |
| 8 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified. |
| 9 | Dismentling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engineer-in-Charge. |
| 10 | S&F roof trusses (framed), trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed. |
| 11 | Excavating in post holes (or similar holes) each n exc 0.5 Cum, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface. (soft/loose soil) complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L for cement concrete type C-2 1:3:6 using 40mm graded stone aggergate as in foundations filling and mass concrete complete all as specified and directed. |
| 13 | M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified and directed by Engineer-in-Charge. |
| 14 | M&L for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 15 | M&L for Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 16 | M&L for preparation of new steel surfaces of any description over 10 cm in width or girth not otherwise described and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 17 | Dismantling floor tiles, or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and staking and reuse for similar works all as specified and directed. |
| 18 | M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed in CM 1:4 for laying floor finishes complete all as specified and directed |
| 19 | Material and labour for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in vertical position as dado/skirting. set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thck in CM 1:4 as backing coat to receive tiles in vertical positioncomplete all as specified and directed. |
| 20 | S&F in repair vitreous china wash hand basin white flat back size 550 X 400 mm excluding taps waste chain and plug and porcelain stopper but including brackets, waste coupling and waste pipe complete all as specified and directed. |
| 21 | S&F in repair 15mm dia long neck pillar tap chromium plated cast copper alloy with capstan head, fancy type screwed down high pressure with or with out letters Hot or cold with long screwed for iron pipe all as specified. |
| 22 | S&F PVC connections 15mm size with PTMT nuts of length 450 mm etc suitable for 15mm bore of pipe complete all as specified. |
| 23 | S&F 600x450 mm beveled edge looking mirror of selected quality glass and backing with 6mm thick AC building board and fixed to wall with PVC rawl plugs with chromium plated brass screws and cup washers as in repair complete all as specified. |
| 24 | S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified. |
| 25 | S&F in repair Bib tap of CP brass, 15mm bore, fency type screwed down, screwed for iron pipe or for brass ferrule complete all as specified. . |
| 26 | Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified |
| 27 | Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified |
| 28 | S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified. |
| 29 | S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified. |
| 30 | S&F in repair Viterous China wash down water closet pan (pedestal pattern), white incl. Seat and cover (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed |
| 31 | S&F in Repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 32 | Taking down chowkhats or frames exc 1.50 Sqm but n .exc 4 Sqm each, removing to or from store, including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts,or otherwise as directed complete all as specified and directed |
| 33 | Refixing wooden shutters of any description in same opening exc 1.00 Sqm but n.exc 2.00 Sqm each, complete all as specified and directed |
| 34 | S&F IInd class hard wood plain, solid, straight chowkat and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified. |
| 35 | S&F for 30 mm thick IInd class HW rail and style plain framed panelled shutter (Two panel) with lock rail and panel of 9mm BWP,commercial ply or 12mm veneered particle beard with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln and chemically pressure treated complete all as diected by Engr-in-Charge. |
| 36 | S&F butt hinges100 mm long, medium weight, cold rolled mild steel, and fixed all as directed. |
| 37 | S&F aluminium anodized barrel tower bolt extruded section and fixed 150 mm long all as directed |
| 38 | S&F extruded aluninum alloy handles, fabricated type anodized 150mm long fixed all as directed |
| 39 | M&L for preparation of old wooden surfaces of any description over 10cm width & girth not otherwise described and applying a coat of synthetic enamel paint complele all as specified |
| 40 | M&L for Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 41 | M&L mild steel bars 10 mm dia and over cut to length bent to shape as required including cranking bending spirally for hooping for columns hooking ends cbinding and including mild steel wire not les then .9 mm dia or securing with clips all as specified and directed. |
| 42 | Ditto as per item above but 6 mm to 8 mm dia as in stirrups, etc. complete all as diected by Engr-in-Charge |
| 43 | M&L formwork to sides of concrete foundations, footings, bases of columns, and similar work; vertical or to batter complete all as diected by Engr-in-Charge |
| 44 | M&L Reinforced cement concrete nomonal mix type B-1 (1:2:4) using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 metre span and chajjas complete all as specified. |
| 45 | Surface excavation n. exc 30 cm depth and averaging 15 cm deep getting out in hard dence soil complete all as diected by Engr-in-Charge. |
| 46 | M&L for hardcore broken stone boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as diected by Engr-in-Charge |
| 47 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as diected by Engr-in-Charge |
| 48 | M&L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling as mass concrete or in sub base of floors complete all as specified. |
| 49 | M&L for chequered cement concrete tiles (reflective type) with mixture of white and grey cement in equal proportion and no pigments of size 30cmx30cmx25 mm thick, set, jointed and pointed in neat cement surry in floors including 20 mm thick screed bed in CM 1:6 for laying floor tiles complete all as specified and diected. |
| 50 | M&L for 100 mm thick Cement concrete Type B-1, 1:2:4 (20 mm graded Stone Agg) complete all as diected by Engr-in-Charge |
| 51 | M&L for Pre-cast cement concrete block masonry with solid blocks type C1, 1:3:6, (using 20mm graded stone aggregate) exc 10 cm width and set in CM (1:4) all as specified and as directed by Engr-in-Charge. |
| 52 | M&L rendering/plastering, 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified. |
| 53 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as specified and directed. |
| 54 | Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed. |
| 55 | Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed |
| 56 | M&L Cement Concrete 1:3:6 (20mm graded stone aggregate) as in Copping of Electric Poles, etc. including weathering slightly rounded or chamfered angle and throating, finishing all exposed faces of Concrete with necessary Formwork including dismantling PCC Copping and/or removing damaged PCC Copping, complete all as specified and as directed. |
| 57 | Supply and cross arm, bracing, supports, clamps and back plate fabricated from structural steel section including nuts, bolts, washers,welding, bending, drillingholes for bolts in any shape and any size inclusive of one primer coat, two coats of aluminium paints as indicateed complete all as specified and as directed by Engineer in charge |
| 58 | Supply,install, testing and commisioning of split type air conditioner 1.5 TR capacity of minimum 3 star rating with standard accessories alonwith cordless remote control, single phase, 240 volts complete with all accessories such as indoor and outdoor units and refrigerant tubing of adequate length as required at site, indoor mounting plate, drain pipe of suitable size brought to ground level from any height including making cable connection by providing three core 2.5 sqmm copper conductor cable PVC insulated, sheathed of adequate length as required at site and initial filling of refrigerant gas including making round hole on existing any type of wall (core cutting if required) for taking up refrigerant tubing, drain pipe and cables etc and making good the disturbed surface by matching with existing adjoining surfaces complete all as specified and directed . |
| 59 | Material and labour for sub main wiring complete with 2 run of 4 sqmm, single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC casing and caping of size 25mm width or above as required at site and accessories such as tee, corners,overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 4 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly including removing old unserviceable item complete all as specified and directed. |
| 60 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 A \\"C\\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. |
| 61 | Supply, install, flameproof AC hi wall split units indoor/outdoor complete with cordless remote control unit and complete indoor and outdoor units and standard accessories of 2 TR capacity complete all as specified and directed. |
| 62 | Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 volts to 250 volts with out voltage stabilized at 20 volts with accuracy of +2.5% and of capacity 5KVA complete all as specified and directed. |
| 63 | S & F Air Conditioner timer switch for auto transfer, 220 volts, indoor type for 2 tone Air Conditioner complete all as specified and directed. |
| 64 | Supply and fix Voltage stabilizer for automatic operation,single phase naturally air cooled indoor type & designed for input variation between 170 volts to 250 volts with out voltage stabilized at 20 volts with accuracy of± 2.5% and of capacity 4 KVA complete all as diected by Engr-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 27, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Nov 03, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender