Tender For Repair To B/R And E/M Assets At Various Locations Of Khanabal At Sector -12 Under Age B/R (P) Of Ge 861 Ews
Tender Value
33 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
14 days left
EMD
66000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To B/R And E/M Assets At Various Locations Of Khanabal At Sector -12 Under Age B/R (P) Of Ge 861 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Demolition cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level with and including removing rubbish material from building and thrown in low lying empty area complete all as specified and as directed by Engineer-in-charge. |
| 2 | Material & Labour for 25 mm thick PCC 1:2:4 Type B-0 (using 12.5 mm graded stone aggregate) as in sub base of floor complete all as specified and directed by Engineer-in-Charge. |
| 3 | Material & Labour for Non skid ceramic coloured joint free tiles , thickness 7mm to 8mm thick (square/ rectangular), colour as approved by Engineer-in-charge area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour / shade of tiles , laid over with and including 15mm thick screed bed in cement mortar 1:6 with and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) with and including removing rubbish material from building and thrown in low lying empty area complete all as specified and as directed by Engineer-in-charge. |
| 4 | Material & Labour for Non skid ceramic coloured joint free tiles , thickness 7mm to 8mm thick (square/ rectangular), colour as approved by Engineer-in-charge area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in vertical surfaces such as skirting / Dado , set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour / shade of tiles , laid over with and including 10mm thick rendering in cement mortar 1:4 with and including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) with and including removing rubbish material from building and thrown in low lying empty area complete all as specified and as directed by Engineer-in-charge. |
| 5 | Material & Labour for Virified Ceramic tiles10mm thick (square/rectangular) polished, (shade as approved by Engineer-in-charge ) , area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured/ shade cement to match the colour / shade of tiles , laid over with and including 15mm thick screed bed in cement mortar 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) with and including removing rubbish material from building and thrown in low lying empty area complete all as specified and as directed by Engineer-in-charge. |
| 6 | Material & Labour for Virified Ceramic tiles10mm thick (square/rectangular) polished, (shade as approved by Engineer-in-charge ) , area of each tiles not exceeding 0.36 sqm , as in vertical surfaces such as skirting / Dado , set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour / shade of tiles , laid over with and including 10mm thick rendering in cement mortar 1:4 with and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) with and including removing rubbish material from building and thrown in low lying empty area complete all as specified and as directed by Engineer-in-charge. |
| 7 | Supply & Fixing in replacement of Bib tap fency type, 20 mm dia with wall flange made of cast copper alloy, chromium plated, butterfly handle screwed for iron pipe or brass ferrule fixed complete all as specified and directed by Engineer-in-Charge. |
| 8 | Supply & Fixing in replacement of Bib tap fency type,15 mm dia with wall flange made of cast copper alloy, chromium plated, butterfly handle screwed for iron pipe or brass ferrule fixed complete all as specified and directed by Engineer-in-Charge. |
| 9 | Supply & Fixing in replacement water closet vitreous china squatting pan, Orissa pattern size 580mm x 440mm white with integral foot rests with and including provision of lime concrete bedding with and including 110mm bore PVC (SWR)'P' Trap and connection to drain and to flushing pipe anti symphonage pipe complete all as specified and directed by Engineer-in-Charge. |
| 10 | Supply and Fixing in replacement Vitreous china wash hand basin, Vitreous china white, flat back, size of 550mm x 400 mm with Mild steel brackets, with and including cutting for and pinning in ends of brackets or erecting stand, with and including waste fittings of brasschromium plated ,with and including 32mm dia PVC waste pipe of required length complete all as specified and directed. as directed by Engineer-in-Charge. |
| 11 | Supply and Fixing in replacement PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle , with and including brackets, with and including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and as directed by Engineer-in- charge. |
| 12 | Material & Labour in replacement Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0 50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ Clading to wall, fixed with self tapping screws, complete all as specified and directed by Engineer-in-Charge. |
| 13 | Material & Labour in replacement Pre-painted galvalume aluminium zink coating GI based Plain steel sheet .50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/Clading to wall, Ridge and eaves board, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 14 | Material and Labour in replacement 6mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face fixed in ceiling flat and fixed with screws to timber frame work complete all as specified and directed by Engineer-in-Charge. |
| 15 | Material and Labour in replacement 6mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face fixed in wall and fixed with screws to timber frame work complete all as specified and directed by Engineer-in-Charge. |
| 16 | Dismantling timber scantlings 40 sq. cm in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed by Engineer-in-Charge. |
| 17 | Material and Labour in replacement for Clean sawn second class soft wood clean swan in scantlings Timber framed and fixed complete all as specified and directed by Engineer-in-Charge. |
| 18 | Material & Labour 2nd class soft wood plain fillets square/rectangular or triangular in section of sectional area not exceeding 03 Sqcm splayed chamfered or rounded on one edge or face complete all as specified and directed by Engineer-in-Charge. |
| 19 | Material & Labour 2nd class soft wood plain fillets square/rectangular or triangular in section of sectional area exceeding 03 Sqcm but not exceeding 6 Sqcm splayed chamfered or rounded on one edge or face complete all as specified and directed by Engineer-in-Charge. |
| 20 | Supply & fixing in replacement Rotational moulded polyethylene water storage tank white colour of capacity 1000 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position with and including Ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 20mm-210 gram) complete all as specified and as directed by Engineer-in-charge. Note: The rate of 20mm bore ball valves, high pressure of PTMT is included in this iterm and nothing shall be paid extra on this account. |
| 21 | Taking down chowkhats or frames with shutters of PVC door ,wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 Sqm each complete all as specified and as directed by Engineer-in- charge. |
| 22 | Taking down wooden shutters only of any description area not exceeding 1.0 sqm each complete all as specified and as directed by Engineer-in- charge. Please Enable Macros to View BoQ information |
| 23 | Taking down wooden shutters only of any description area not exceeding 1.0 sqm each complete all as specified and as directed by Engineer-in- charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender