Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Bsnl Edbg Nit No30 Providing Electrical Maintenance Works At Various Nbsnl Bts Sites At Rto Yelahanka Modi Hospital Sharada Colony Shiva Nagar Under
Tender Overview
Project Description
Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Bsnl Edbg Nit No30 Providing Electrical Maintenance Works At Various Nbsnl Bts Sites At Rto Yelahanka Modi Hospital Sharada Colony Shiva Nagar Under Dgm Nw Bengaluru; El.. - Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 35 Sq.Mm As Per Dept. Specifications Directly In Ground Including Excavation And Refilling The Trench But Excluding Sand Cushioning And Protective Covering Etc As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 35 Sq.Mm In The Existing .Pvc/Rcc/ Hume/ Stoneware/ Metal Gi Pipe Surfece Of Wall As Required. , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. A)4X25sq.Mm , Supplying And Fixing Meter Board Made Of 16 G Prefabricated Powder Coated 2 Compartment Ms Box With Sealing Arrangement As Per Bescom Specification Top Extended For Rain Protection Fixing On Surface Of Wall Necessary Insulators Ryb Sleeves Bolt And Nuts Earthing The Enclosure Of Size 225Mm Depth X 500Mm Width X 900Mm Height Nominal Size Including, A)10Mm Thick Frp Hylum Sheet Suitable For Fixing Bescom Energy Meter And Providing.B) 63A 4 Pole Tpn Mcb Suitable For 415V Ac Supply .C) 100 S 3Phase And Neutral Aluminium Bus Bar Of About 350Mm Length With Sealing Arrangement I/C 4 X 10 Sqmm Cuppar Conductor Singal Core Wirng At Bus Bar To Meter , Meter To Out Going Tpn Mcb Fixing On Surface Of Wall Necessary Hardware Items Earthing Etc As Required Note: The Work Shall Be Carried Out In Coordination With Bescom Authority For Obtaining Power Supply Shut Down , Supplying And Fixing Following Electrical Items Suitable For Operation Of 230V/415V 50Hz Ac Supply I/C Making Necessary Interconnections, Testing, Commissioning Etc. As Reqd. A) 3No 100 A Aerial Fuse Cutout & 1No Neutral Link With Dmc/Frp Sheet & Suitable Cl (Bescom Approved Make) Or S/S Make , Supplying And Fixing Of Wall Mounting Type Energy Meter Panel Made Of 16G Ms Sheet Including Cutting Welding And Powder Coating Suitable For Working On 440V 50Hz Ac Supply And Coating Suitable For Working On Consisting Of Switch Gears Such As A) Du100h(63A-8Oa Thermal Release Range) 3Pole Mccb-1No( M/S L&T Model Cm9789400h2 Or Superior Make) B) 100A 3No Rewirable Fuse Cutout With Nl -1Set , C)300Mmx250mm X6mm Thick Hylum Sheet For Energy Meter And 40A 4Pole Rccb100ma- 1No (M/S L&T) D) 1Set Of 100A 4Pole Alu Bus Bar Etc As Reqd (Note: The Work Shall Be Carried Out In Coordination With Bescom Authority, Building Owner And Bsnl Engineer Incharge For Obtaining Power Supply Service Connection Including Applying For New Power Supply) , Supplying And Fixing Of Pothead Suitable For 4 Core 16/25 Sqmm Ug Cable Including Providing Suitable Cl On Bescom Pole Etc As Required , Supplying And Fixing The Following Electrical Items Suitable For Operation Of 230V 50Hz Ac Supply I/C Making Necessary Interconnections, Testing, Commissioning Etc. As Reqd. [M/S L&T Or Ss Make] A) 4X 16 Sqmm Pvc Insulated Al Weather Proof Wire On Bescom Pole , Supplying And Laying The 40Mm Size Isi Marked Gi Pipe With Accessories For Road Crossing Direct In Ground On Surface Of Wall Including Cl Ing Etc Complete As Required. , Supplying And Fixing, The Following C Curve Type Miniature Circuit Breaker / Accessories Suitable For Operation On 415V/230V Ac Supply In The Existing Mcb Dbs Complete I/C Making Necessary Interconnections, Testing And Commissioning Etc Complete As Required [Make: M/S L&T Make].A) 63 A 4 Pole Mcb , Supplying & Fixing Of 380 Mm Sweep Heavy Duty Exhaust Fan Suitable For Operation On 230Volts, 50Hz, Ac Supply In The Existing Opening Including Making Necessary Inter-Connections, Supplying And Fixing Louvers For Preventing Rain Water Entry, Testing And Commissioning Etc., Complete As Reqd (Make: M/S Havells / Crompton / Orient / Usha/Ge Khaitan / Almonard Or Ss Make). , Supplying & Fixing Analog Timer With Built-In No & Nc Contacts In A Suitable Size Weather Proof Box On Surface Of Wall For Automatic Control/Operation Of The Existing Exhaust Fan I/C Necessary Internal Wiring, Testing, Commissioning, Etc., Complete As Reqd. [Timer Make: L&T, Gic Model : J648b1 Or Similar Superior Make] , Restoring Of Minor Electrical Problem Such As Replacement Of Burnt Cable End Terminations At Various Locations Tightening Of All Electrical Connections At Db/Meter Board/Ea Set Control Panel Including Liasioning With Bescom Officials Making Good The Connections Testing Etc As Required. , S&F The Following Led Battens Suitable For Working On 230V 50Hz Ac Supply Etc., As Required. A) 24Watt 4Ft Led Batten , Transportation Of 4Core25 Sqmm Cable From Wms Compound To Bts At Bts Stations At Rto Yelahanka, Modi Hospital, Sharada Colony, Shiva Nagar Wherever Required Including Arranging Vehicle, Labour, Loading And Unloading To The Bts Site Etc As Reqd , Supplying And Drawing Following Sizes Of Fr Pvc Insulated Copper Conductor, Single Core Cable In The Exsting Pvc Conduit Ms Lader Etc As Required. A)3Core 1.5 Sq.Mm Round Unarmoured Cable , Supply And Fixing Of 12Mm Holl Ms Mesh I/C 20Mm Ms Flat Size 250 Mm (2 Nos )400 Mm (2 Nos ) I/C Cutting Welding Bending Painting Etc As Reqd And Cutting Of Bts Container Of 250 Mm X400 Mm Size For Fixing The Fresh Air Including Finishing Outside / Inside Of Hole, Making Good The Damages Etc., Complete As Reqd. , Cutting Of Bts Container Of Suitable Size For Fixing The 380 Mm Exhaust Fan Including Finishing Outside / Inside Of Hole, Making Good The Damages Etc., Complete As Reqd. , Dismantling Of Existing Wall Mounting Type / Feeder Pillar /Ms Angle Iron Stand Of Approx. Size 2Mtrx1mtr, Removing Of Incoming & Outgoing Ug Cables, Terminations, Making Good The Damages, Including Arranging Necessary Man Power, T&P And Handed Over To Bts In-Charge As Required. , Dismantling And Removing Of Existing 16/ 25 Sqmm Ug Cable From Ground Floor To Exsting Dg Set At Teres Bts And Reruting Of Ugcable To Bts Tpndb I/C Terminations, Making Good The Damages, Including Testing As Required. , Dismantling Of Existing Energy Meter, Cts, Busbars, Disconnecting Of Incoming & Outgoing Ug Cables, Wiring For 3 Nos., Cts With 3X2.5Sqmm (Approx. 1.00 Metre Length) Frls Pvc Insulated Copper Conductor, Single Core Cable For Each Cts, Colouring S1,S2 & Common Phase Including Suitable Size Cu. Lugs, Crimping, Pvc Ferules From Cts To Energy Meter, Connections In New Meter Board, Testing, Arranging Shutdown, Liasioning With Bescom Authority As Per The Instructions Of The Engineer-Incharge Etc., As Required. , S&F Of 100 S 3Phase & Neutral Aluminium Bus Bar Of About 300Mm Length In A Suitable Prefabricated, Powder Coated 16G Ms Box With Sealing Arrangement As Per Bescom Specification, Fixing On Surface Of Wall, Necessary Insulators, Ryb Sleeves, Bolt & Nuts, Earthing The Enclosure Etc., As Required. , Supplying And Fixing Of 3 Phase 0-30A Direct Operated Bescom Approved Smart Meter In Existing Meter Board Including, Fixing With Necessary Hardware/ Cl S Arranging For Bescom Power Shut Down, Connections With Existing Wires, Testing Etc As Required. (Bescom Approved) , Supplying And Drawing Following Sizes Of Fr Pvc Insulated Copper Conductor, Single Core Cable In The Exsting Pvc Conduit Ms Lader Etc As Required. A)3Core 1.5 Sq.Mm Round Unarmoured Cable , S&F Of Ms Angle Frame Work Made Of The Following I/C Cutting, Welding, Drilling Holes, Painting, Grouting Etc As Reqd A) 38Mm X 38Mm X 5Mm Angle Iron , Supply And Fixing Of Sheet For Prevention Of Rane Water At Existing Meter Board , Supplying And Laying Of The 4 Core 10 Sqmm Pvc Insulated Unarmoured Copper Conductor Cable Of 1.1 Kv Grade On Surface Of Wall /In Existing Pipe Etc., Complete As Reqd [M/S Havells Or Similar Superior Make) , Supplying And Fixing 15/16 A Piano Type Switch And 6/16A 6Pin Socket In Suitable Size Ms Box Including Phenolic Laminated Cover Plate Interconnections Etc. As Required. , Supplying And Fixing Of Bulk Head Fitting With 12 W Led Bulb Suitable For Working On 230V 50 Hz Ac Supply On Surface Of Wall / Ceiling Including Extending Of 2Core 1.5Sqmm Copper Wire In Pvc Conduit From Db To Fitting Connections ,Testing Etc As Required (M/S Havells / Ancho Or Ss Make ) , Supplying And Fixing Of 16 Sweep,Oscillating Type Wall Mounting Fan Suitable For Operation On 230 Volts, 50 Hz, Ac Supply Complete With 3Core Chord Wire,3 Pin Plug Top Including Making Necessary Interconnections, Testing And Commissioning Etc., As Reqd.,(Make: M/S Khaitan / Crompton / Ss Bsnl Approved Make ) , Wiring For Light Point Fan Point Exhaust Fan Point Call Bell Point With 1.5 Sqmm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface Recessed Medium Class Pvc Conduit With Piano Type Switch Phenolic Laminated Sheet Suitable Size Ms Box And Earthing The Point With 1.5 Sqmm Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required. A Group A
BOQ
| Sl. No. | Item Title | Item Description |
| 1 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size not exceeding 35 sq.mm as per Dept. specifications directly in ground including excavation and refilling the trench but excluding sand cushioning and protective covering etc as required | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size not exceeding 35 sq.mm as per Dept. specifications directly in ground including excavation and refilling the trench but excluding sand cushioning and protective covering etc as required |
| 2 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size not exceeding 35 sq.mm in the existing .PVC/RCC/ HUME/ STONEWARE/ METAL GI pipe Surfece of Wall as required. | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size not exceeding 35 sq.mm in the existing .PVC/RCC/ HUME/ STONEWARE/ METAL GI pipe Surfece of Wall as required. |
| 3 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a)4X25Sq.mm | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a)4X25Sq.mm |
| 4 | Supplying and Fixing Meter board made of 16 G prefabricated powder coated 2 compartment MS Box with sealing arrangement as per BESCOM specification top extended for rain protection fixing on surface of wall necessary insulators RYB sleeves bolt and nuts earthing the enclosure of size 225mm depth x 500mm width x 900mm height nominal size including, a)10mm thick FRP Hylum sheet suitable for fixing BESCOM Energy Meter and Providing.b) 63A 4 Pole TPN Mcb suitable for 415V AC supply .c) 100 Amps 3phase and Neutral Aluminium bus bar of about 350mm length with sealing arrangement i/c 4 X 10 Sqmm Cuppar Conductor Singal Core wirng at Bus Bar to Meter , meter to out going TPN MCB fixing on surface of wall necessary hardware items earthing etc as required Note: The work shall be carried out in coordination with BESCOM authority for obtaining power supply Shut down | Supplying and Fixing Meter board made of 16 G prefabricated powder coated 2 compartment MS Box with sealing arrangement as per BESCOM specification top extended for rain protection fixing on surface of wall necessary insulators RYB sleeves bolt and nuts earthing the enclosure of size 225mm depth x 500mm width x 900mm height nominal size including, a)10mm thick FRP Hylum sheet suitable for fixing BESCOM Energy Meter and Providing.b) 63A 4 Pole TPN Mcb suitable for 415V AC supply .c) 100 Amps 3phase and Neutral Aluminium bus bar of about 350mm length with sealing arrangement i/c 4 X 10 Sqmm Cuppar Conductor Singal Core wirng at Bus Bar to Meter , meter to out going TPN MCB fixing on surface of wall necessary hardware items earthing etc as required Note: The work shall be carried out in coordination with BESCOM authority for obtaining power supply Shut down |
| 5 | Supplying and fixing following electrical items suitable for operation of 230V/415V 50HZ AC supply i/c making necessary interconnections, testing, commissioning etc. as reqd. a) 3No 100 A Aerial Fuse Cutout & 1No neutral link with DMC/FRP Sheet & suitable clamp (BESCOM approved make) or s/s make | Supplying and fixing following electrical items suitable for operation of 230V/415V 50HZ AC supply i/c making necessary interconnections, testing, commissioning etc. as reqd. a) 3No 100 A Aerial Fuse Cutout & 1No neutral link with DMC/FRP Sheet & suitable clamp (BESCOM approved make) or s/s make |
| 6 | Supplying and Fixing of wall mounting type Energy meter panel made of 16G MS sheet including cutting welding and powder coating suitable for working on 440V 50Hz AC supply and coating suitable for working on consisting of switch gears such as a) DU100H(63A-8OA thermal release range) 3pole MCCB-1No( M/s L&T Model CM9789400H2 or superior make) b) 100A 3No Rewirable fuse Cutout with NL -1set , c)300mmx250mm x6mm thick hylum sheet for energy meter and 40A 4pole RCCB100mA- 1No (M/s L&T) d) 1set of 100A 4pole alu Bus bar etc as reqd (Note: The work shall be carried out in coordination with BESCOM authority, Building owner and BSNL engineer incharge for obtaining power supply Service connection Including applying for new power supply) | Supplying and Fixing of wall mounting type Energy meter panel made of 16G MS sheet including cutting welding and powder coating suitable for working on 440V 50Hz AC supply and coating suitable for working on consisting of switch gears such as a) DU100H(63A-8OA thermal release range) 3pole MCCB-1No( M/s L&T Model CM9789400H2 or superior make) b) 100A 3No Rewirable fuse Cutout with NL -1set , c)300mmx250mm x6mm thick hylum sheet for energy meter and 40A 4pole RCCB100mA- 1No (M/s L&T) d) 1set of 100A 4pole alu Bus bar etc as reqd (Note: The work shall be carried out in coordination with BESCOM authority, Building owner and BSNL engineer incharge for obtaining power supply Service connection Including applying for new power supply) |
| 7 | Supplying and fixing of Pothead suitable for 4 core 16/25 Sqmm UG Cable including providing suitable clamp on BESCOM Pole etc as required | Supplying and fixing of Pothead suitable for 4 core 16/25 Sqmm UG Cable including providing suitable clamp on BESCOM Pole etc as required |
| 8 | Supplying and Fixing the following electrical items suitable for operation of 230V 50HZ AC supply i/c making necessary interconnections, testing, commissioning etc. as reqd. [M/s L&T or ss make] a) 4x 16 Sqmm PVC insulated AL weather proof wire on BESCOM Pole | Supplying and Fixing the following electrical items suitable for operation of 230V 50HZ AC supply i/c making necessary interconnections, testing, commissioning etc. as reqd. [M/s L&T or ss make] a) 4x 16 Sqmm PVC insulated AL weather proof wire on BESCOM Pole |
| 9 | Supplying and Laying the 40mm size 'ISI marked' GI pipe with accessories for road crossing direct in ground on surface of wall including clamping etc complete as required. | Supplying and Laying the 40mm size 'ISI marked' GI pipe with accessories for road crossing direct in ground on surface of wall including clamping etc complete as required. |
| 10 | Supplying and fixing, the following \\"C\\" curve type miniature circuit breaker / accessories suitable for operation on 415V/230V AC supply in the existing MCB DB's complete i/c making necessary interconnections, testing and commissioning etc complete as required [Make: M/s L&T make].a) 63 A 4 pole MCB | Supplying and fixing, the following \\"C\\" curve type miniature circuit breaker / accessories suitable for operation on 415V/230V AC supply in the existing MCB DB's complete i/c making necessary interconnections, testing and commissioning etc complete as required [Make: M/s L&T make].a) 63 A 4 pole MCB |
| 11 | Supplying & Fixing of 380 mm sweep heavy duty exhaust fan suitable for operation on 230Volts, 50Hz, AC supply in the existing opening including making necessary inter-connections, supplying and fixing louvers for preventing rain water entry, testing and commissioning etc., complete as reqd (Make: M/s Havells / Crompton / Orient / Usha/GE Khaitan / Almonard or SS make). | Supplying & Fixing of 380 mm sweep heavy duty exhaust fan suitable for operation on 230Volts, 50Hz, AC supply in the existing opening including making necessary inter-connections, supplying and fixing louvers for preventing rain water entry, testing and commissioning etc., complete as reqd (Make: M/s Havells / Crompton / Orient / Usha/GE Khaitan / Almonard or SS make). |
| 12 | Supplying & fixing Analog timer with built-in NO & NC contacts in a suitable size weather proof box on surface of wall for automatic control/operation of the existing exhaust fan i/c necessary internal wiring, testing, commissioning, etc., complete as reqd. [Timer Make: L&T, GIC Model : J648B1 or similar superior make] | Supplying & fixing Analog timer with built-in NO & NC contacts in a suitable size weather proof box on surface of wall for automatic control/operation of the existing exhaust fan i/c necessary internal wiring, testing, commissioning, etc., complete as reqd. [Timer Make: L&T, GIC Model : J648B1 or similar superior make] |
| 13 | Restoring of minor Electrical problem such as replacement of burnt cable end terminations at various locations tightening of all electrical connections at DB/meter board/EA set control panel including liasioning with BESCOM officials making good the connections testing etc as required. | Restoring of minor Electrical problem such as replacement of burnt cable end terminations at various locations tightening of all electrical connections at DB/meter board/EA set control panel including liasioning with BESCOM officials making good the connections testing etc as required. |
| 14 | S&F the following LED battens suitable for working on 230V 50Hz AC supply etc., as required. a) 24Watt 4ft LED Batten | S&F the following LED battens suitable for working on 230V 50Hz AC supply etc., as required. a) 24Watt 4ft LED Batten |
| 15 | Transportation of 4core25 Sqmm cable from WMS compound to BTS at BTS stations at RTO Yelahanka, Modi Hospital, Sharada Colony, Shiva Nagar wherever required including arranging vehicle, labour, loading and unloading to the BTS site etc as reqd | Transportation of 4core25 Sqmm cable from WMS compound to BTS at BTS stations at RTO Yelahanka, Modi Hospital, Sharada Colony, Shiva Nagar wherever required including arranging vehicle, labour, loading and unloading to the BTS site etc as reqd |
| 16 | Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the Exsting PVC conduit MS Lader etc as required. a)3core 1.5 Sq.mm round unarmoured cable | Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the Exsting PVC conduit MS Lader etc as required. a)3core 1.5 Sq.mm round unarmoured cable |
| 17 | Supply and Fixing of 12mm holl ms mesh i/c 20mm ms flat size 250 mm (2 nos )400 mm (2 nos ) i/c Cutting Welding Bending Painting etc as reqd and Cutting of BTS container of 250 mm X400 mm size for fixing the Fresh Air including finishing outside / inside of hole, making good the damages etc., complete as reqd. | Supply and Fixing of 12mm holl ms mesh i/c 20mm ms flat size 250 mm (2 nos )400 mm (2 nos ) i/c Cutting Welding Bending Painting etc as reqd and Cutting of BTS container of 250 mm X400 mm size for fixing the Fresh Air including finishing outside / inside of hole, making good the damages etc., complete as reqd. |
| 18 | Cutting of BTS container of suitable size for fixing the 380 mm exhaust fan including finishing outside / inside of hole, making good the damages etc., complete as reqd. | Cutting of BTS container of suitable size for fixing the 380 mm exhaust fan including finishing outside / inside of hole, making good the damages etc., complete as reqd. |
| 19 | Dismantling of existing wall mounting type / Feeder pillar /MS angle iron stand of approx. size 2mtrx1mtr, removing of incoming & outgoing UG cables, terminations, making good the damages, including arranging necessary man power, T&P and handed over to BTS in-charge as required. | Dismantling of existing wall mounting type / Feeder pillar /MS angle iron stand of approx. size 2mtrx1mtr, removing of incoming & outgoing UG cables, terminations, making good the damages, including arranging necessary man power, T&P and handed over to BTS in-charge as required. |
| 20 | Dismantling and Removing of existing 16/ 25 Sqmm UG Cable from Ground floor to Exsting DG Set at Teres BTS and Reruting of UGCable to BTS TPNDB i/c terminations, making good the damages, including Testing as required. | Dismantling and Removing of existing 16/ 25 Sqmm UG Cable from Ground floor to Exsting DG Set at Teres BTS and Reruting of UGCable to BTS TPNDB i/c terminations, making good the damages, including Testing as required. |
| 21 | Dismantling of existing Energy Meter, CT's, Busbars, disconnecting of incoming & outgoing UG cables, wiring for 3 nos., CT's with 3x2.5Sqmm (approx. 1.00 Metre length) FRLS PVC insulated copper conductor, single core cable for each CT's, colouring S1,S2 & common phase including suitable size cu. lugs, crimping, PVC Ferules from CT's to Energy Meter, connections in new Meter Board, testing, arranging shutdown, liasioning with BESCOM authority as per the instructions of the Engineer-incharge etc., as required. | Dismantling of existing Energy Meter, CT's, Busbars, disconnecting of incoming & outgoing UG cables, wiring for 3 nos., CT's with 3x2.5Sqmm (approx. 1.00 Metre length) FRLS PVC insulated copper conductor, single core cable for each CT's, colouring S1,S2 & common phase including suitable size cu. lugs, crimping, PVC Ferules from CT's to Energy Meter, connections in new Meter Board, testing, arranging shutdown, liasioning with BESCOM authority as per the instructions of the Engineer-incharge etc., as required. |
| 22 | S&F of 100Amps 3phase & Neutral Aluminium bus bar of about 300mm length in a suitable prefabricated, powder coated 16G MS Box with sealing arrangement as per BESCOM specification, fixing on surface of wall, necessary insulators, RYB sleeves, bolt & nuts, earthing the enclosure etc., as required. | S&F of 100Amps 3phase & Neutral Aluminium bus bar of about 300mm length in a suitable prefabricated, powder coated 16G MS Box with sealing arrangement as per BESCOM specification, fixing on surface of wall, necessary insulators, RYB sleeves, bolt & nuts, earthing the enclosure etc., as required. |
| 23 | Supplying and fixing of 3 phase 0-30A Direct operated BESCOM approved SMART meter in existing meter board including, fixing with necessary hardware/ clamps arranging for BESCOM power shut down, connections with existing wires, testing etc as required. (Bescom approved) | Supplying and fixing of 3 phase 0-30A Direct operated BESCOM approved SMART meter in existing meter board including, fixing with necessary hardware/ clamps arranging for BESCOM power shut down, connections with existing wires, testing etc as required. (Bescom approved) |
| 24 | Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the Exsting PVC conduit MS Lader etc as required. a)3core 1.5 Sq.mm round unarmoured cable | Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the Exsting PVC conduit MS Lader etc as required. a)3core 1.5 Sq.mm round unarmoured cable |
| 25 | S&F of MS angle frame work made of the following i/c cutting, welding, drilling holes, painting, grouting etc as reqd a) 38mm x 38mm x 5mm Angle Iron | S&F of MS angle frame work made of the following i/c cutting, welding, drilling holes, painting, grouting etc as reqd a) 38mm x 38mm x 5mm Angle Iron |
| 26 | Supply and Fixing of sheet for prevention of Rane Water at Existing Meter Board | Supply and Fixing of sheet for prevention of Rane Water at Existing Meter Board |
| 27 | Supplying and Laying of the 4 core 10 Sqmm PVC insulated unarmoured copper conductor Cable of 1.1 KV grade on surface of wall /in existing pipe etc., complete as reqd [M/s Havells or similar superior make) | Supplying and Laying of the 4 core 10 Sqmm PVC insulated unarmoured copper conductor Cable of 1.1 KV grade on surface of wall /in existing pipe etc., complete as reqd [M/s Havells or similar superior make) |
| 28 | Supplying and fixing 15/16 A piano type switch and 6/16A 6Pin socket in suitable size MS Box including phenolic laminated cover plate interconnections etc. as required. | Supplying and fixing 15/16 A piano type switch and 6/16A 6Pin socket in suitable size MS Box including phenolic laminated cover plate interconnections etc. as required. |
| 29 | Supplying and fixing of bulk head fitting with 12 W LED bulb suitable for working on 230V 50 Hz AC supply on surface of wall / ceiling including extending of 2core 1.5sqmm copper wire in PVC conduit from DB to fitting connections ,testing etc as required (M/s Havells / Ancho or ss make ) | Supplying and fixing of bulk head fitting with 12 W LED bulb suitable for working on 230V 50 Hz AC supply on surface of wall / ceiling including extending of 2core 1.5sqmm copper wire in PVC conduit from DB to fitting connections ,testing etc as required (M/s Havells / Ancho or ss make ) |
| 30 | Supplying and Fixing of 16'' sweep,oscillating type Wall mounting fan suitable for operation on 230 Volts, 50 Hz, AC supply complete with 3core chord wire,3 pin plug top including making necessary interconnections, testing and commissioning etc., as reqd.,(Make: M/s Khaitan / Crompton / SS BSNL Approved make ) | Supplying and Fixing of 16'' sweep,oscillating type Wall mounting fan suitable for operation on 230 Volts, 50 Hz, AC supply complete with 3core chord wire,3 pin plug top including making necessary interconnections, testing and commissioning etc., as reqd.,(Make: M/s Khaitan / Crompton / SS BSNL Approved make ) |
| 31 | Wiring for light point fan point exhaust fan point call bell point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable in surface recessed medium class PVC conduit with piano type switch phenolic laminated sheet suitable size MS box and earthing the point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable etc as required. a Group A | Wiring for light point fan point exhaust fan point call bell point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable in surface recessed medium class PVC conduit with piano type switch phenolic laminated sheet suitable size MS box and earthing the point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable etc as required. a Group A |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender